home *** CD-ROM | disk | FTP | other *** search
- Subject: v15i072: Xmodem release 3.6, Part03/05
- Newsgroups: comp.sources.unix
- Sender: sources
- Approved: rsalz@uunet.UU.NET
-
- Submitted-by: Steve Grandi <grandi@noao.arizona.edu>
- Posting-number: Volume 15, Issue 72
- Archive-name: xmodem3.6/part03
-
- : This is a shar archive. Extract with sh, not csh.
- echo x - getput.c
- sed -e 's/^X//' > getput.c << '!Funky!Stuff!'
- X/*
- X * Contains system routines to get and put bytes, change tty modes, etc
- X * Most of the routines are VERY 4.2BSD Specific!!!
- X */
- X
- X#include "xmodem.h"
- X
- X/*
- X *
- X * Get a byte from the specified file. Buffer the read so we don't
- X * have to use a system call for each character.
- X *
- X */
- Xgetbyte(fildes, ch) /* Buffered disk read */
- Xint fildes;
- Xchar *ch;
- X
- X {
- X static char buf[BUFSIZ]; /* Remember buffer */
- X static char *bufp = buf; /* Remember where we are in buffer */
- X
- X if (nbchr == 0) /* Buffer exausted; read some more */
- X {
- X if ((nbchr = read(fildes, buf, BUFSIZ)) < 0)
- X error("File Read Error", TRUE);
- X bufp = buf; /* Set pointer to start of array */
- X }
- X if (--nbchr >= 0)
- X {
- X *ch = *bufp++;
- X return(0);
- X }
- X else
- X {
- X return(EOF);
- X }
- X }
- X
- X/* Count the number of newlines in a file so we know the REAL file size */
- X
- Xlong
- Xcountnl(fd)
- Xint fd;
- X{
- X char buf[BUFSIZ];
- X char *bufp;
- X long nltot = 0;
- X int numchar;
- X long lseek();
- X
- X while (numchar = read(fd, buf, BUFSIZ)) /* cycle through file */
- X for (bufp=buf; numchar--; bufp++)
- X if (*bufp == '\n')
- X nltot++;
- X
- X (void) lseek (fd, 0l, 0); /* rewind file */
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: countnl--%ld newlines counted\n", nltot);
- X return (nltot);
- X}
- X
- X/* CRC-16 constant array...
- X from Usenet contribution by Mark G. Mendel, Network Systems Corp.
- X (ihnp4!umn-cs!hyper!mark)
- X*/
- X
- X/* crctab as calculated by initcrctab() */
- Xunsigned short crctab[1<<B] = {
- X 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
- X 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
- X 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
- X 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
- X 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
- X 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
- X 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
- X 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
- X 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
- X 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
- X 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
- X 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
- X 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
- X 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
- X 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
- X 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
- X 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
- X 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
- X 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
- X 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
- X 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
- X 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
- X 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
- X 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
- X 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
- X 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
- X 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
- X 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
- X 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
- X 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
- X 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
- X 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0
- X };
- X
- X/* get a byte from data stream -- timeout if "seconds" elapses */
- X/* This routine is VERY 4.2 specific */
- X
- Xint
- Xreadbyte(seconds)
- Xint seconds;
- X {
- X int readfd;
- X char c;
- X struct timeval tmout;
- X
- X tmout.tv_sec = seconds;
- X tmout.tv_usec = 0;
- X
- X readfd = 1<<0;
- X
- X if ((select(1, &readfd, (int *)0, (int *)0, &tmout)) == 0)
- X return(TIMEOUT);
- X
- X read(0, &c, 1);
- X
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: readbyte %02xh\n", c & 0xff);
- X
- X return(c & 0xff); /* return the char */
- X }
- X
- X/* flush input stream by reading pending characters */
- X
- Xflushin()
- X {
- X int readfd;
- X char inbuf[BBUFSIZ];
- X struct timeval tmout;
- X
- X /* set up a usec timeout on stdin */
- X tmout.tv_sec = 0;
- X tmout.tv_usec = 1;
- X readfd = 1<<0;
- X
- X /* any characters pending?; return if none */
- X if ((select(1, &readfd, (int *)0, (int *)0, &tmout)) == 0)
- X return;
- X
- X /* read the characters to flush them (assume there are fewer than BBUFSIZ */
- X (void) read(0, inbuf, BBUFSIZ);
- X }
- X
- X/*
- X get a buffer (length bufsize) from data stream -- timeout if "seconds" elapses.
- X Read bunches of characters to save system overhead;
- X Further process data while kernel is reading stream (calculating "checksum").
- X Try to nap long enough so kernel collects 100 characters or so until we wake up
- X unless TOOBUSY is set.
- X*/
- X
- X/* This routine is VERY 4.2 specific */
- X
- Xint
- Xreadbuf(bufsize, seconds, tmode, amode, recvsectcnt, checksum, bufctr)
- X
- Xint bufsize, /* number of chars to be read */
- Xseconds, /* timeout period for each read */
- Xtmode, /* transmission mode: TRUE if text */
- Xamode, /* transmission mode: TRUE if apple macintosh */
- X*checksum, /* pointer to checksum value */
- X*bufctr; /* length of actual data string in buffer */
- Xlong recvsectcnt; /* running sector count (128 byte sectors) */
- X
- X{
- X int readfd; /* mask for select call */
- X struct timeval tmout; /* timeout structure for select */
- X int numread; /* number of chars read */
- X int left; /* number of chars left to read */
- X int recfin = FALSE; /* flag that EOF read */
- X char inbuf[BBUFSIZ]; /* buffer for incoming packet */
- X register unsigned char c; /* character being processed */
- X register unsigned short chksm; /* working copy of checksum */
- X register int bfctr; /* working copy of bufctr */
- X int j; /* loop index */
- X char *sectdisp();
- X
- X tmout.tv_sec = seconds;
- X tmout.tv_usec = 0;
- X readfd = 1<<0;
- X chksm = 0;
- X bfctr = 0;
- X
- X for (left = bufsize; left > 0;) {
- X
- X /* read however many chars are waiting */
- X
- X if ((select(1, &readfd, (int *)0, (int *)0, &tmout)) == 0)
- X return(TIMEOUT);
- X
- X numread = read(0, inbuf, left);
- X left -= numread;
- X
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: readbuf--read %d characters\n", numread);
- X
- X /* now process part of packet we just read */
- X
- X for (j = 0; j < numread; j++)
- X {
- X buff[bfctr] = c = inbuf[j] & 0xff;
- X fileread++;
- X
- X if (CRCMODE) /* CRC */
- X chksm = (chksm<<B) ^ crctab[(chksm>>(W-B)) ^ c];
- X
- X else /* checksum */
- X chksm = ((chksm+c) & 0xff);
- X
- X if (CHECKLENGTH && fileread > filelength) /* past EOF ? */
- X continue;
- X
- X if (tmode) /* text mode processing */
- X {
- X buff[bfctr] &= 0x7f; /* nuke bit 8 */
- X if (c == CR || c == 0) /* skip CRs and nulls */
- X continue;
- X else if (c == CTRLZ) /* CP/M EOF char */
- X {
- X recfin = TRUE;
- X continue;
- X }
- X else if (!recfin) /* don't increment if past EOF */
- X bfctr++;
- X }
- X else if (amode) /* Apple macintosh text mode processing */
- X {
- X buff[bfctr] &= 0x7f; /* nuke bit 8 */
- X if (c == 0) /* skip nulls */
- X continue;
- X else if (c == CR) /* translate CR to LF */
- X buff[bfctr] = LF;
- X else if (c == CTRLZ) /* CP/M EOF char */
- X {
- X recfin = TRUE;
- X continue;
- X }
- X if (!recfin) /* don't increment if past EOF */
- X bfctr++;
- X }
- X else /* binary */
- X bfctr++;
- X
- X }
- X
- X /* go to sleep to save uneeded system calls while kernel
- X is reading data from serial line;
- X fudge constant from 10000 to 9000 to avoid sleeping too long.
- X */
- X if (left && !TOOBUSY)
- X napms( (left<SLEEPNUM ? left:SLEEPNUM) * 9000/ttyspeed);
- X
- X }
- X
- X if (CHECKLENGTH && fileread >= filelength)
- X logitarg("File end from YMODEM length found in sector %s\n",
- X sectdisp(recvsectcnt,bufsize,1));
- X *checksum = chksm;
- X *bufctr = bfctr;
- X return(0);
- X}
- X
- X/* send a byte to data stream */
- X
- Xsendbyte(data)
- Xchar data;
- X {
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: sendbyte %02xh\n", data & 0xff);
- X
- X if (write(1, &data, 1) != 1) /* write the byte (assume it goes NOW; no flushing needed) */
- X error ("Write error on stream", TRUE);
- X return;
- X }
- X
- X/* send a buffer to data stream */
- X
- Xwritebuf(buffer, nbytes)
- Xchar *buffer;
- Xint nbytes;
- X {
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: writebuf (%d bytes)\n", nbytes);
- X
- X if (write(1, buffer, nbytes) != nbytes) /* write the buffer (assume no TIOCFLUSH needed) */
- X error ("Write error on stream", TRUE);
- X return;
- X }
- X
- X/*
- X * "nap" for specified time -- VERY 4.2BSD specific
- X */
- X
- Xnapms (milliseconds)
- Xint milliseconds;
- X{
- X struct timeval timeout;
- X int readfd;
- X
- X if (milliseconds == 0)
- X return;
- X if (DEBUG)
- X fprintf (LOGFP, "DEBUG: napping for %d ms\n", milliseconds);
- X timeout.tv_sec = 0;
- X timeout.tv_usec = milliseconds * 1000;
- X readfd = 0;
- X
- X (void) select(1, &readfd, (int *)0, (int *)0, &timeout);
- X}
- X
- X
- X/* set and restore tty modes for XMODEM transfers */
- X/* These routines are 4.2/v7(?) specific */
- X
- Xstruct sgttyb ttys, ttysnew; /* for stty terminal mode calls */
- Xstruct stat statbuf; /* for terminal message on/off control */
- X
- Xint wason; /* holds status of tty read write/modes */
- Xchar *tty; /* current tty name */
- X
- X
- Xsetmodes()
- X {
- X char *ttyname();
- X
- X int n;
- X
- X extern onintr();
- X
- X sleep(2); /* let the output appear */
- X if (ioctl(0,TIOCGETP,&ttys)<0) /* get tty params [V7] */
- X error("Can't get TTY Parameters", TRUE);
- X
- X tty = ttyname(0); /* identify current tty */
- X
- X ttysnew.sg_ispeed = ttys.sg_ispeed; /* copy input speed */
- X ttysnew.sg_ospeed = ttys.sg_ospeed; /* copy input speed */
- X ttysnew.sg_flags |= RAW; /* set for RAW Mode */
- X ttysnew.sg_flags &= ~ECHO; /* set for no echoing */
- X ttysnew.sg_flags &= ~TANDEM; /* turn off flow control */
- X
- X /* set new paramters */
- X if (ioctl(0,TIOCSETP,&ttysnew) < 0)
- X error("Can't set new TTY Parameters", TRUE);
- X
- X /* Flush characters waiting for read or write */
- X n = 0;
- X if (ioctl(0,TIOCFLUSH,&n) < 0)
- X error("Can't flush terminal queue", TRUE);
- X
- X /* get tty status */
- X if (stat(tty, &statbuf) < 0)
- X error("Can't get your TTY Status", TRUE);
- X
- X if (statbuf.st_mode & 022) /* Need to turn messages off */
- X if (chmod(tty, (int)statbuf.st_mode & ~022) < 0)
- X error("Can't change TTY mode", TRUE);
- X else
- X wason = TRUE;
- X else
- X wason = FALSE;
- X
- X /* set up signal catcher to restore tty state if we are KILLed */
- X
- X if (signal(SIGTERM, SIG_IGN) != SIG_IGN)
- X signal(SIGTERM, onintr);
- X }
- X
- X/* restore normal tty modes */
- X
- Xrestoremodes(errcall)
- Xint errcall;
- X {
- X if (wason)
- X if (chmod(tty, (int)statbuf.st_mode | 022) < 0)
- X error("Can't change TTY mode", FALSE);
- X if (ioctl(0,TIOCSETP,&ttys) < 0)
- X { if (!errcall)
- X error("RESET - Can't restore normal TTY Params", FALSE);
- X else
- X printf("RESET - Can't restore normal TTY Params\n");
- X }
- X if (signal(SIGTERM, SIG_IGN) != SIG_IGN)
- X signal(SIGTERM, SIG_DFL);
- X return;
- X }
- X
- X
- X
- X
- X/* signal catcher */
- Xonintr()
- X {
- X error("Kill signal; bailing out", TRUE);
- X }
- X
- X/* create string with a timestamp for log file */
- X
- Xchar *stamptime()
- X{
- X char *asctime(); /* stuff to get timestamp */
- X struct tm *localtime(), *tp;
- X struct timeval tv;
- X struct timezone tz;
- X
- X gettimeofday (&tv, &tz); /* fill in timestamp */
- X tp = localtime ((time_t *)&tv.tv_sec);
- X return(asctime(tp));
- X}
- X
- X
- X
- X/* get tty speed for time estimates */
- X
- Xgetspeed()
- X {
- X static int speedtbl[] = {0, 50, 75, 110, 134, 150, 200, 300, 600,
- X 1200, 1800, 2400, 4800, 9600, 19200, 0};
- X if (ioctl(0,TIOCGETP,&ttys) < 0) /* get tty structure */
- X error("Can't get TTY parameters", FALSE);
- X
- X if (ttys.sg_ispeed >= 0 && ttys.sg_ispeed <= 14)
- X {
- X ttyspeed = speedtbl[ttys.sg_ispeed];
- X logitarg ("Line speed = %d bits per second\n", ttyspeed);
- X }
- X else
- X {
- X ttyspeed = 1200;
- X logit ("Can't determine line speed; assuming 1200 bps\n");
- X }
- X }
- !Funky!Stuff!
- echo x - getput.sysv.c
- sed -e 's/^X//' > getput.sysv.c << '!Funky!Stuff!'
- X/*
- X * Contains system routines to get and put bytes, change tty modes, etc
- X * Sys V version. UNTESTED!!!!!!
- X */
- X
- X#include "xmodem.h"
- X
- X/*
- X *
- X * Get a byte from the specified file. Buffer the read so we don't
- X * have to use a system call for each character.
- X *
- X */
- Xgetbyte(fildes, ch) /* Buffered disk read */
- Xint fildes;
- Xchar *ch;
- X
- X {
- X static char buf[BUFSIZ]; /* Remember buffer */
- X static char *bufp = buf; /* Remember where we are in buffer */
- X
- X if (nbchr == 0) /* Buffer exausted; read some more */
- X {
- X if ((nbchr = read(fildes, buf, BUFSIZ)) < 0)
- X error("File Read Error", TRUE);
- X bufp = buf; /* Set pointer to start of array */
- X }
- X if (--nbchr >= 0)
- X {
- X *ch = *bufp++;
- X return(0);
- X }
- X else
- X {
- X return(EOF);
- X }
- X }
- X
- X/* Count the number of newlines in a file so we know the REAL file size */
- X
- Xlong
- Xcountnl(fd)
- Xint fd;
- X{
- X char buf[BUFSIZ];
- X char *bufp;
- X long nltot = 0;
- X int numchar;
- X long lseek();
- X
- X while (numchar = read(fd, buf, BUFSIZ)) /* cycle through file */
- X for (bufp=buf; numchar--; bufp++)
- X if (*bufp == '\n')
- X nltot++;
- X
- X (void) lseek (fd, 0l, 0); /* rewind file */
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: countnl--%ld newlines counted\n", nltot);
- X return (nltot);
- X}
- X
- X/* CRC-16 constant array...
- X from Usenet contribution by Mark G. Mendel, Network Systems Corp.
- X (ihnp4!umn-cs!hyper!mark)
- X*/
- X
- X/* crctab as calculated by initcrctab() */
- Xunsigned short crctab[1<<B] = {
- X 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
- X 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
- X 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
- X 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
- X 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
- X 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
- X 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
- X 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
- X 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
- X 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
- X 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
- X 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
- X 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
- X 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
- X 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
- X 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
- X 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
- X 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
- X 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
- X 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
- X 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
- X 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
- X 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
- X 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
- X 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
- X 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
- X 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
- X 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
- X 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
- X 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
- X 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
- X 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0
- X };
- X
- X/* get a byte from data stream -- timeout if "seconds" elapses */
- X
- Xint timedout;
- X
- Xint
- Xreadbyte(seconds)
- Xint seconds;
- X{
- X int force_it();
- X char c;
- X signal(SIGALRM, force_it);
- X
- X timedout = 0;
- X alarm(seconds);
- X read(0, &c, 1);
- X alarm(0);
- X if (timedout)
- X return(TIMEOUT);
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: readbyte %02xh\n", c & 0xff);
- X return(c & 0xff);
- X}
- X
- Xint
- Xforce_it()
- X{
- X timedout++;
- X return;
- X}
- X
- X
- X/* flush input stream */
- X
- Xflushin()
- X {
- X/* No good way to do this without select */
- X/* Perhaps....but we waste 1 second with every call!
- X while (readbyte(1) != TIMEOUT)
- X ;
- X*/
- X }
- X
- X/*
- X get a buffer (length bufsize) from data stream -- timeout if "seconds" elapses.
- X Read bunches of characters to save system overhead;
- X Further process data while kernel is reading stream (calculating "checksum").
- X Try to nap long enough so kernel collects 100 characters or so until we wake up
- X unless TOOBUSY is set.
- X*/
- X
- X
- Xint
- Xreadbuf(bufsize, seconds, tmode, amode, recvsectcnt, checksum, bufctr)
- X
- Xint bufsize, /* number of chars to be read */
- Xseconds, /* timeout period for each read */
- Xtmode, /* transmission mode: TRUE if text */
- Xamode, /* transmission mode: TRUE if apple macintosh */
- X*checksum, /* pointer to checksum value */
- X*bufctr; /* length of actual data string in buffer */
- Xlong recvsectcnt; /* running sector count (128 byte sectors) */
- X
- X{
- X int force_it();
- X int numread; /* number of chars read */
- X int left; /* number of chars left to read */
- X int recfin = 0; /* flag that EOF read */
- X char inbuf[BBUFSIZ]; /* buffer for incoming packet */
- X register unsigned char c; /* character being processed */
- X register unsigned short chksm; /* working copy of checksum */
- X register int bfctr; /* working copy of bufctr */
- X int j; /* loop index */
- X char *sectdisp();
- X
- X signal(SIGALRM, force_it);
- X chksm = 0;
- X bfctr = 0;
- X
- X for (left = bufsize; left > 0;) {
- X
- X /* read however many chars are waiting */
- X timedout = 0;
- X alarm(seconds);
- X numread = read(0, inbuf, left);
- X alarm(0);
- X if (timedout)
- X return(TIMEOUT);
- X left -= numread;
- X
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: readbuf--read %d characters\n", numread);
- X
- X /* now process part of packet we just read */
- X
- X for (j = 0; j < numread; j++)
- X {
- X buff[bfctr] = c = inbuf[j] & 0xff;
- X fileread++;
- X
- X if (CRCMODE) /* CRC */
- X chksm = (chksm<<B) ^ crctab[(chksm>>(W-B)) ^ c];
- X
- X else /* checksum */
- X chksm = ((chksm+c) & 0xff);
- X
- X if (CHECKLENGTH && fileread > filelength) /* past EOF ? */
- X continue;
- X
- X if (tmode) /* text mode processing */
- X {
- X buff[bfctr] &= 0x7f; /* nuke bit 8 */
- X if (c == CR || c == 0) /* skip CRs and nulls */
- X continue;
- X else if (c == CTRLZ) /* CP/M EOF char */
- X {
- X recfin = TRUE;
- X continue;
- X }
- X else if (!recfin) /* don't increment if past EOF */
- X bfctr++;
- X }
- X else if (amode) /* Apple macintosh text mode processing */
- X {
- X buff[bfctr] &= 0x7f; /* nuke bit 8 */
- X if (c == 0) /* skip nulls */
- X continue;
- X else if (c == CR) /* translate CR to LF */
- X buff[bfctr] = LF;
- X else if (c == CTRLZ) /* CP/M EOF char */
- X {
- X recfin = TRUE;
- X continue;
- X }
- X if (!recfin) /* don't increment if past EOF */
- X bfctr++;
- X }
- X else /* binary */
- X bfctr++;
- X
- X }
- X
- X /* go to sleep to save uneeded system calls while kernel
- X is reading data from serial line, fudge constant from 10 to
- X 9 to avoid sleeping too long
- X */
- X if (left && !TOOBUSY)
- X sleep ((left<SLEEPNUM ? left:SLEEPNUM) * 9/ttyspeed);
- X }
- X
- X if (CHECKLENGTH && fileread >= filelength)
- X logitarg("File end from YMODEM length found in sector %s\n",
- X sectdisp(recvsectcnt,bufsize,1));
- X *checksum = chksm;
- X *bufctr = bfctr;
- X return(0);
- X}
- X
- X/* send a byte to data stream */
- X
- Xsendbyte(data)
- Xchar data;
- X {
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: sendbyte %02xh\n", data & 0xff);
- X
- X if (write(1, &data, 1) != 1) /* write the byte (assume it goes NOW; no flushing needed) */
- X error ("Write error on stream", TRUE);
- X return;
- X }
- X
- X/* send a buffer to data stream */
- X
- Xwritebuf(buffer, nbytes)
- Xchar *buffer;
- Xint nbytes;
- X {
- X if (DEBUG)
- X fprintf(LOGFP, "DEBUG: writebuf (%d bytes)\n", nbytes);
- X
- X if (write(1, buffer, nbytes) != nbytes) /* write the buffer (assume no TIOCFLUSH needed) */
- X error ("Write error on stream", TRUE);
- X return;
- X }
- X
- X/* set and restore tty modes for XMODEM transfers */
- X
- Xstruct termio ttys;
- Xstruct stat statbuf; /* for terminal message on/off control */
- X
- Xint wason; /* holds status of tty read write/modes */
- Xchar *tty; /* current tty name */
- X
- X
- Xsetmodes()
- X {
- X char *ttyname();
- X struct termio ttysnew;
- X
- X extern onintr();
- X
- X sleep(2); /* let the output appear */
- X if (ioctl(0,TCGETA,&ttys)<0) /* get tty params */
- X error("Can't get TTY Parameters", TRUE);
- X
- X tty = ttyname(0); /* identify current tty */
- X
- X if (ioctl(0,TCGETA,&ttysnew)<0) /* get tty params */
- X error("Can't get TTY Parameters", TRUE);
- X ttysnew.c_cc[4] = 1; /* VMIN */
- X ttysnew.c_cc[5] = 0; /* VTIME */
- X ttysnew.c_iflag = 0;
- X ttysnew.c_oflag = 0;
- X ttysnew.c_lflag = 0;
- X ttysnew.c_cflag &= ~CSIZE;
- X ttysnew.c_cflag |= CS8;
- X ttysnew.c_cflag &= ~PARENB;
- X if (ioctl(0,TCSETA,&ttysnew)<0) /* set new paramters */
- X error("Can't set new TTY Parameters", TRUE);
- X
- X if (stat(tty, &statbuf) < 0) /* get tty status */
- X error("Can't get your TTY Status", TRUE);
- X
- X if (statbuf.st_mode & 022) /* Need to turn messages off */
- X if (chmod(tty, (int)statbuf.st_mode & ~022) < 0)
- X error("Can't change TTY mode", TRUE);
- X else
- X wason = TRUE;
- X else
- X wason = FALSE;
- X
- X /* set up signal catcher to restore tty state if we are KILLed */
- X
- X if (signal(SIGTERM, SIG_IGN) != SIG_IGN)
- X signal(SIGTERM, onintr);
- X }
- X
- X/* restore normal tty modes */
- X
- Xrestoremodes(errcall)
- Xint errcall;
- X {
- X if (wason)
- X if (chmod(tty, (int)statbuf.st_mode | 022) < 0)
- X error("Can't change TTY mode", FALSE);
- X if (ioctl(0,TCSETA,&ttys) < 0)
- X { if (!errcall)
- X error("RESET - Can't restore normal TTY Params", FALSE);
- X else
- X printf("RESET - Can't restore normal TTY Params\n");
- X }
- X if (signal(SIGTERM, SIG_IGN) != SIG_IGN)
- X signal(SIGTERM, SIG_DFL);
- X return;
- X }
- X
- X
- X
- X
- X/* signal catcher */
- Xonintr()
- X {
- X error("Kill signal; bailing out", TRUE);
- X }
- X
- X/* create string with a timestamp for log file */
- X
- Xchar *stamptime()
- X{
- X char *asctime(); /* stuff to get timestamp */
- X struct tm *localtime(), *tp;
- X long now;
- X
- X time(&now);
- X tp = localtime(&now);
- X return(asctime(tp));
- X}
- X
- X
- X
- X/* get tty speed for time estimates */
- X
- Xgetspeed()
- X {
- X static int speedtbl[] = {0, 50, 75, 110, 134, 150, 200, 300, 600,
- X 1200, 1800, 2400, 4800, 9600, 19200, 0};
- X struct termio ttystemp;
- X
- X if (ioctl(0,TCGETA,&ttystemp) < 0) /* get tty structure */
- X error("Can't get TTY parameters", FALSE);
- X if ((ttystemp.c_cflag & 017) >= 0 && (ttystemp.c_cflag & 017) <= 14)
- X {
- X ttyspeed = speedtbl[ttystemp.c_cflag & 017];
- X logitarg ("Line speed = %d bits per second\n", ttyspeed);
- X }
- X else
- X {
- X ttyspeed = 1200;
- X logit ("Can't determine line speed; assuming 1200 bps\n");
- X }
- X }
- !Funky!Stuff!
- exit
-
-