Usenet 1994 January/usenetsourcesnewsgroupsinfomagicjanuary1994.iso/answers/mail/inter-network-guide

Internet Message Format | 1993-12-16 | 25.7 KB

Path: senator-bedfellow.mit.edu!bloom-beacon.mit.edu!nic.hookup.net!news.moneng.mei.com!uwm.edu!csd4.csd.uwm.edu!yanoff
From: [e-mail] (Scott A. Yanoff)
Newsgroups: comp.mail.misc,alt.bbs.lists,alt.internet.services,comp.misc,news.answers,comp.answers
Subject: Updated Inter-Network Mail Guide
Followup-To: poster
Date: 16 Dec 1993 23:55:57 GMT
Organization: University of Wisconsin - Milwaukee, WI
Lines: 810
Approved: [e-mail]
Message-ID: <[e-mail]>
NNTP-Posting-Host: 129.89.7.4
Summary: Changed ArCom information.
Xref: senator-bedfellow.mit.edu comp.mail.misc:15379 alt.bbs.lists:4441 alt.internet.services:13813 comp.misc:22868 news.answers:15917 comp.answers:3066

Archive-name: mail/inter-network-guide

VERSION: $Date: 12/16/93 $

           * INTER-NETWORK MAIL GUIDE:    Last Update: 12/16/93 *

 Further modifications and (C) 1993 by Scott Yanoff ([e-mail])
 Inter-Network Mail Guide - Original Copyright (C) 1992 by John J. Chew

 This guide is available via anonymous ftp to: csd4.csd.uwm.edu

 INTRODUCTION

 This file documents methods of sending mail from one network to another.
 It represents the aggregate knowledge of the readers of comp.mail.misc
 and many contributors elsewhere.  If you know of any corrections or
 additions to this file, please follow the instructions in the section
 entitled 'HOW TO FORMAT INFORMATION FOR SUBMISSION' and then mail the
 information to me: Scott A. Yanoff <[e-mail]>.

 HOW TO USE THIS GUIDE

 If you just want to browse the guide manually for information, this is what
 you need to know.  The guide is organized as a list of entries.  Each entry
 tells you how to get from one network to another.  Here is what a typical
 entry might look like:

   FROM: mynet
   TO: yournet
   RECIPIENT: youraddress
   CONTACT: contactaddress
   INSTR: send to 'youraddress@thegateway'

 This means that to send mail FROM a network called 'mynet' TO a
 RECIPIENT address 'youraddress' on a network called 'yournet', you
 should follow the INSTRUCTIONS shown and address your mail to
 'youraddress@thegateway'.

 Names and descriptions of the possible FROM and TO fields:

N: aol           ; America Online; America Online, Inc.; commercial;
N: alternex      ; AlterNex; IBASE; non-profit;
N: applelink     ; AppleLink; Apple Computer, Inc.; commercial;
N: arcom         ; ArCom; Swiss PTT; commercial; X.400 only
N: att           ; AT&T Mail; AT&T; commercial;
N: bitnet        ; BITNET; none; academic;
N: bix           ; Byte Information eXchange; Byte magazine; commercial;
N: bmug          ; BMUG ; Berkeley Macintosh Users Group; in-house;
N: calvacom      ; Calvacom;
- Reseau & Communication Informatique (RCI-Calvacom); commercial;
N: chasque       ; Chasque; Instituto del Tercer Mundo; non-profit;
N: comlink       ; ComLink; ? ; non-profit;
N: compuserve    ; CompuServe; CompuServe Inc.; commercial;
N: connect       ; Connect Professional Information Network; ?; commercial;
N: easylink      ; Easylink; AT&T; commercial;
N: easynet       ; Easynet; DEC; in-house;
N: econet        ; EcoNet; Institute for Global Communications; non-profit;
N: ecuanex       ; EcuaNex; ? ; non-profit;
N: envoy         ; Envoy-100; Telecom Canada; commercial; X.400
N: fax           ; Facsimile document transmission; none; none;
N: fidonet       ; FidoNet; none; bbs;
N: genie         ; GEnie; GE Information Services; commercial;
N: geonet        ; GeoNet Mailbox Systems;
- Geonet Mailbox Services GmbH/Systems Inc.; commercial;
N: glasnet       ; GlasNet; ? ; non-profit;
N: gold-400      ; GNS Gold 400; British Telecom; commercial; X.400
N: goldgate      ; GoldGate Telcom Gold; Net-Tel Computer Systems; ?;
N: greennet      ; GreenNet; Soft Solutions Ltd; commercial;
N: gsfcmail      ; GSFCmail; NASA/Goddard Space Flight Center; in-house;
N: ibm           ; VNET; IBM; in-house;
N: ibmmail       ; ?; IBM; commercial;
N: internet      ; Internet; none; academic;
N: keylink       ; KeyLink; Telecom Australia; commercial; X.400
N: mailnet       ; X.400; ?; ?;
N: mausnet       ; Mausnet; Mausnet; non-profit;
N: mci           ; MCIMail; MCI; commercial;
N: nasamail      ; NASAMail; NASA; in-house;
N: nicarao       ; Nicarao; CRIES; non-profit;
N: nordnet       ; NordNet; ? ; non-profit;
N: nsi           ; NASA Science Internet; NASA; government;
-  Dual-protocol: instructions given here pertain only to NSI-DECnet addresses
-  (NSI-TCP/IP addresses should be treated as shown for 'internet')
N: omnet         ; OMNET; OMNET; commercial;
N: peacenet      ; PeaceNet/EcoNet; Institute for Global Communications;
- non-profit;
N: pegasus       ; Pegasus; Pegasus Networks; non-profit;
N: prodigy       ; PRODIGY; commercial; ?;
N: pronet        ; Pro-Net Australia; National Info. Resource Gateway; ?;
N: sinet         ; Schlumberger Information NETwork; ?; ?;
N: sprintmail    ; SprintMail; Sprint; commercial;
N: telecom       ; Telecom Australia; National Videotex Network; ?;
N: thenet        ; Texas Higher Education Network; University of Texas;
- academic ;
N: web           ; The Web; Nirv Community Resource Centre; non-profit;
N: wwivnet       ; WWIVnet; WWIVnet; non-profit;

 The 'RECIPIENT' record gives an example of an address on the
 destination network, to make it clear in subsequent lines what text
 requires subsitution.

 The 'CONTACT' record gives an address for inquiries concerning the
 gateway, expressed as an address reachable from the source (#FROM:) network.
 Presumably, if you can't get the gateway to work at all, then knowing
 an unreachable address on another network will not be of great help.

 The 'INSTR' records, of which there may be several, give verbal
 instructions to a user of the source network to let them send mail
 to a user on the destination network.  Text that needs to be typed
 will appear in double quotes, with C-style escapes if necessary.  If
 the instructions consist simply of mailing to a certain address, this
 will be indicated by the words 'send to' followed by a quoted address.
 If there are alternative addresses, they will be marked 'or to' instead.

 HOW TO FORMAT INFORMATION FOR SUBMISSION

 Here is what I really want in the way of information.  If you are adding
 a new network to the list, tell me what its official name is (pay attention
 to capitalization), what the name of its responsible organization is, and
 what kind of a network it is (academic, commercial, government, in-house
 or non-profit).  If this isn't clear, look at the examples above.
 For each connection, give me an entry that looks something like:

  FROM: foonet
  TO: barnet
  RECIPIENT: baraddress
  CONTACT: contactaddress
  INSTR: send to 'baraddress@thegateway'

 Note that 'contactaddress' must be an address expressed in foonet's native
 format, and not that of barnet, since if a user is having trouble accessing
 barnet, giving him/her an address on that net to contact for help is not
 productive.  If there is no contact/postmaster address, please tell me.
 If there are more complicated instructions, use additional #INSTR: lines.

 Once you've got all the information together, send it to me in an e-mail
 message with the words 'INMG update' in the Subject: line.  You can in
 general expect an answer back from me within a week.

FROM: aol
TO: applelink
RECIPIENT: user
CONTACT: Internet
INSTR: send to 'user@applelink'

FROM: aol
TO: compuserve
RECIPIENT: 71234,567
CONTACT: Internet
INSTR: send to '71234.567@cis'

FROM: aol
TO: genie
RECIPIENT: user
CONTACT: Internet
INSTR: send to 'user@genie'

FROM: aol
TO: internet
RECIPIENT: user@domain
CONTACT: Internet
INSTR: send to 'user@domain'

FROM: applelink
TO: bitnet
RECIPIENT: user@site
INSTR: send to '[e-mail]@internet#'

FROM: applelink
TO: internet
RECIPIENT: user@domain
INSTR: send to 'user@domain@internet#' (address must be < 35 characters)

FROM: arcom
TO: internet
RECIPIENT: [e-mail]
INSTR: send to:
- PN=/C=ch/O=inet/ADMD=SWITCHgate/DDA=RFC-822=fred(a)Domain.dd.uu.us

FROM: att
TO: bitnet
RECIPIENT: user@site
INSTR: send to 'internet!site.bitnet!user'

FROM: att
TO: internet
RECIPIENT: user@domain
INSTR: send to 'internet!domain!user'

FROM: bitnet
TO: internet
RECIPIENT: user@domain
INSTR: Methods for sending mail from Bitnet to the Internet vary depending on
-      what mail software is running at the Bitnet site in question.  In the
-      best case, users should simply be able to send mail to 'user@domain'.
-      If this doesn't work, try 'user%domain@gateway' where 'gateway' is a
-      Bitnet-Internet gateway site nearby.  Finally, if neither of these
-      works, you may have to try hand-coding an SMTP envelope for your mail.

FROM: calvacom
TO: fax
RECIPIENT: (1) 41 08 11 99
INSTR: send to 'TLC/41081199'
INSTR: use standard phone numbers as calling from Paris, France.

FROM: calvacom
TO: internet
RECIPIENT: user@domain
CONTACT: [e-mail]
INSTR: send to 'EM/user@domain'

FROM: calvacom
TO: easylink
RECIPIENT: number
CONTACT: 19000600
INSTR: send to 'ML/number'
INSTR: Calvacom professionnal account needed.

FROM: compuserve
TO: fax
RECIPIENT: [phone]
INSTR: send to '>FAX [phone]'
INSTR: not transitive - message must originate from a CompuServe user
INSTR: for calls outside the NANP, use '011' as the international prefix

FROM: compuserve
TO: internet
RECIPIENT: user@domain
INSTR: send to '>INTERNET:user@domain' (only from CompuServe users)

FROM: compuserve
TO: mci
RECIPIENT: 123-4567
INSTR: send to '>MCIMAIL:123-4567' (only from CompuServe users)

FROM: connect
TO: internet
RECIPIENT: user@domain
INSTR: send to 'DASN'
-      and set the first line of message: '"user@domain"@DASN'

FROM: easylink
TO: calvacom
RECIPIENT: JS10 (John Smith)
INSTR: send to '19000600 /ATTN JS10 SMITH+'

FROM: easynet
TO: bitnet
RECIPIENT: user@site
CONTACT: DECWRL::ADMIN
INSTR: send to 'nm%DECWRL::"[e-mail]"' (from VMS using NMAIL)
INSTR: send to '[e-mail]' (from Ultrix)
INSTR:   or to '[e-mail]' (from Ultrix via IP)
INSTR:   or to 'DECWRL::"[e-mail]"' (from Ultrix via DECN)

FROM: easynet
TO: fidonet
RECIPIENT: john smith at 1:2/3.4
CONTACT: DECWRL::ADMIN
INSTR: send to 'nm%DECWRL::"[e-mail]"'
-      (from VMS using NMAIL)
INSTR: send to '[e-mail]'
-      (from Ultrix)
INSTR: or to '"john.smith%p4.f3.n2.z1.fidonet.org"@decwrl.dec.com'
-      (from Ultrix via IP)
INSTR: or to 'DECWRL::"[e-mail]"'
-      (from Ultrix via DECN)

FROM: easynet
TO: internet
RECIPIENT: user@domain
CONTACT: DECWRL::ADMIN
INSTR: send to 'nm%DECWRL::"user@domain"' (from VMS using NMAIL)
INSTR: send to 'user@domain' (from Ultrix)
INSTR:   or to '[e-mail]' (from Ultrix via IP)
INSTR:   or to 'DECWRL::"user@domain"' (from Ultrix via DECN)
INSTR:   or to 'user@domain @Internet' (using ALL-IN-1)

FROM: envoy
TO: internet
RECIPIENT: user@domain
CONTACT: ICS.TEST or ICS.BOARD
INSTR: send to '[RFC-822="user(a)domain"]INTERNET/TELEMAIL/US'
INSTR: for special characters, use @=(a), !=(b), _=(u),
INSTR:          any=(three octal digits)

FROM: fax
TO: calvacom
RECIPIENT: JS10 (John Smith)
INSTR: send to '[phone]'
INSTR: and write on every pages 'ATTN JS10 SMITH'
INSTR: fax are manually processed.

FROM: fidonet
TO: internet
RECIPIENT: [e-mail]
INSTR: convert to '[e-mail] ON 1:1/31

FROM: fidonet
TO: wwivnet
RECIPIENT: number@node
CONTACT: Kevin C. ON 1:100/215
INSTR: convert to '#number @node ON 1:100/215'
INSTR: WWIVgate; LOW TRAFFIC SITE, USE SPARINGLY..  Gateway is modem-based,
-      they absorb cost of long distance connects to pick-up and deliver.
-      Keep messages under 10K, use infrequently, do NOT use mail-lists or
-      file/list-server commands.

FROM: genie
TO: internet
RECIPIENT: user@domain
CONTACT: [e-mail]
INSTR: send to user@domain@INET#

FROM: geonet
TO: internet
RECIPIENT: user@domain
INSTR: send to 'DASN'
INSTR: set subject line to 'user@domain!subject'

FROM: gold-400
TO: internet
RECIPIENT: user@host
INSTR: send to '/DD.RFC-822=user(a)host/O=uknet/PRMD=uk.ac/ADMD=gold 400/C=GB/'
INSTR: for special characters, use @=(a), %=(p), !=(b), "=(q)

FROM: gsfcmail
TO: internet
RECIPIENT: user@domain
CONTACT: cust.svc
INSTR: send to '(SITE:SMTPMAIL,ID:<user(a)domain>)'
INSTR: or to '(C:USA,A:TELEMAIL,P:SMTPMAIL,ID:<user(a)domain>)'
INSTR: or send to 'POSTMAN'
-      and set the first line of message to 'To: user@domain'
INSTR: Help is also available by phoning [phone].

FROM: gsfcmail
TO: nsi
RECIPIENT: host::user
CONTACT: cust.svc
INSTR: send to '(SITE:SMTPMAIL,ID:<user(a)host.DN.NASA.GOV>)'
INSTR: or to '(C:USA,A:TELEMAIL,P:SMTPMAIL,ID:<user(a)host.DN.NASA.GOV>)'
INSTR: or send to 'POSTMAN'
-      and set the first line of message to 'To: [e-mail]'

FROM: ibmmail
TO: internet
RECIPIENT: "userid@domain"
INSTR: imbed the following lines in messages sent from IBMMAIL and address
- the message to IBMMAIL(INTERNET)
- /INTERNET
- /TO userid1@domain
- /CC userid2@domain
- /REPORT
- /END

FROM: internet
TO: alternex
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]'

FROM: internet
TO: aol
RECIPIENT: A User
CONTACT: [e-mail]
INSTR: send to [e-mail] (all lower-case, remove spaces)
INSTR: msgs are truncated to 32K (8K for PCs), all characters except newline
-      & printable ASCII characters are mapped to spaces, users are limited to
-      75 pieces of Internet mail in their mailbox at a time.

FROM: internet
TO: applelink
RECIPIENT: user
INSTR: send to '[e-mail]'

FROM: internet
TO: arcom
RECIPIENT: [e-mail]
INSTR: send to:
- /DDA=SYS=11000/DDA=UFD=TSC000/G=/PN=fred/O=swissbox/A=arCom/C=CH/

FROM: internet
TO: att
RECIPIENT: user
INSTR: send to '[e-mail]'

FROM: internet
TO: bitnet
RECIPIENT: user@site
INSTR: send to 'user%site.bitnet@gateway' where 'gateway' is a gateway host
-      that is on both the internet and bitnet.  Some examples of gateways
-      are: cunyvm.cuny.edu mitvma.mit.edu.  Check first to see what local
-      policies are concerning inter-network forwarding.

FROM: internet
TO: bix
RECIPIENT: user
INSTR: send to '[e-mail]'

FROM: internet
TO: bmug
RECIPIENT: John Smith or John J. Smith
CONTACT: Email the director: [e-mail] or phone (510)849-BMUG
INSTR: send to '[e-mail]'  or '[e-mail]'

FROM: internet
TO: calvacom
RECIPIENT: JS10 (John Smith)
INSTR: send to '[e-mail]'
INSTR: msgs are limited to 100 000 chars each.

FROM: internet
TO: chasque
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]'

FROM: internet
TO: comlink
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]'

FROM: internet
TO: compuserve
RECIPIENT: 71234,567
INSTR: send to '[e-mail]'
INSTR:   Ordinary Compuserve account IDs are pairs of octal numbers

FROM: internet
TO: compuserve
RECIPIENT: organization:department:user
INSTR: send to '[e-mail]'
INSTR:  This syntax is for use with members of organizations which have a
-       private CompuServe mail area.  'department' may not always be present.

FROM: internet
TO: connect
RECIPIENT: NAME
INSTR: send to '[e-mail]'

FROM: internet
TO: easylink
RECIPIENT: user mail number 1234567
INSTR: send to: [e-mail]

FROM: internet
TO: easynet
RECIPIENT: HOST::USER
CONTACT: [e-mail]
INSTR: send to '[e-mail]'
INSTR:   or to '[e-mail]'

FROM: internet
TO: easynet
RECIPIENT: John Smith @ABC
CONTACT: [e-mail]
INSTR: send to '[e-mail]'
INSTR:   this syntax is for sending mail to ALL-IN-1 users

FROM: internet
TO: econet
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]

FROM: internet
TO: ecuanex
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]'

FROM: internet
TO: envoy
RECIPIENT: John Smith (ID=userid)
INSTR: send to 'uunet.uu.net!att!attmail!mhs!envoy!userid'

FROM: internet
TO: fidonet
RECIPIENT: john smith at 1:2/3.4
INSTR: send to '[e-mail]'

FROM: internet
TO: genie
RECIPIENT: user
CONTACT: [e-mail]
INSTR: send to [e-mail]

FROM: internet
TO: geonet
RECIPIENT: user at host
INSTR: send to [e-mail]
INSTR: geo1 (Europe), geo2 (UK), geo4 (USA)

FROM: internet
TO: glasnet
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]'

FROM: internet
TO: gold-400
RECIPIENT: (G:John, I:Q, S:Smith, OU: org_unit, O:organization, PRMD:prmd)
INSTR: send to 'john.q.smith@org_unit.org.prmd.gold-400.gb'
INSTR:   or to
- '"/G=John/I=Q/S=Smith/OU=org_unit/O=org/PRMD=prmd/ADMD=gold 400/C=GB/"
- @mhs-relay.ac.uk'

FROM: internet
TO: goldgate
RECIPIENT: 10087:CQQ061
INSTR: send to '[e-mail]'
INSTR:   or to '/G=10087/S=CQQ061/P=uk.ac/O=GoldGate/C=GB/'

FROM: internet
TO: greennet
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: [e-mail]    (or [e-mail] if mailing from JANET)

FROM: internet
TO: gsfcmail
RECIPIENT: user
CONTACT: [e-mail]
INSTR: send to '[e-mail]'
INSTR:   or to '/PN=user/ADMD=TELEMAIL/PRMD=GSFC/O=GSFCMAIL/C=US/
-        @x400.msfc.nasa.gov'

FROM: internet
TO: ibm
RECIPIENT: [e-mail]_domain (syntax?)
CONTACT: [e-mail]
INSTR: send to '[e-mail]_domain.ibm.com'
INSTR: To look up a user's mailbox name, mail to [e-mail] with
- the line 'WHOIS name' in the message body.

FROM: internet
TO: ibmmail
RECIPIENT: [e-mail]
CONTACT: IBMMAIL(ccsssuuu)
INSTR: send to [e-mail]
- cc=country code, sss=company site, uuu=unique number (alphanumeric base 35
- <36?> number) together this form the "userid" for ibmmail.

FROM: internet
TO: keylink
RECIPIENT: (G:John, I:Q, S:Smith, O:MyOrg, A:Telememo, C:au)
CONTACT: [e-mail]
INSTR: send to [e-mail]
INSTR: for keylink Private Mail Domains such as
INSTR:   (G:John, S:Smith, O:MyDept, P:AusGov, A:Telememo, C:au)
INSTR:   send to [e-mail]

FROM: internet
TO: mausnet
RECIPIENT: hans schmidt @ box
CONTACT: [e-mail]
INSTR: send to '[e-mail]'

FROM: internet
TO: mci
RECIPIENT: John Smith (123-4567)
INSTR: send to '[e-mail]'
INSTR: or to '[e-mail]' (if 'JSmith' is unique)
INSTR: or to '[e-mail]' (if 'John Smith' is unique - note the
-      underscore!)
INSTR: or to 'John_Smith/[e-mail]' (if 'John Smith' is NOT unique)

FROM: internet
TO: nasamail
RECIPIENT: user
CONTACT: [e-mail]
INSTR: send to '[e-mail]'
INSTR: Help is available by phoning [phone] or [phone].
INSTR: Soon to be: [e-mail]  where "center" is where they work.

FROM: internet
TO: nicarao
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]'

FROM: internet
TO: nordnet
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]'

FROM: internet
TO: nsi
RECIPIENT: host::user
CONTACT: [e-mail]
INSTR: send to '[e-mail]'
INSTR:   or to '[e-mail]'
INSTR:   or to '[e-mail]'
INSTR: Help is also available by phoning [phone].

FROM: internet
TO: omnet
RECIPIENT: user
CONTACT: /dd.un=omnet.service/c=us/admd=telemail/o=omnet/@sprint.com
INSTR: send to '/dd.un=user/o=omnet/admd=telemail/c=us/@sprint.com'
INSTR: Help is available by phoning [phone]

FROM: internet
TO: peacenet
RECIPIENT: user
CONTACT: [e-mail]
INSTR: send to '[e-mail]'

FROM: internet
TO: pegasus
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]'

FROM: internet
TO: prodigy
RECIPIENT: user
CONTACT: [e-mail]
INSTR: send to '[e-mail]'     For example: [e-mail]

FROM: internet
TO: pronet
RECIPIENT: user
CONTACT: [e-mail] or [phone] (Brian Evans)
INSTR: send to '[e-mail]'

FROM: internet
TO: sinet
RECIPIENT: node::user or node1::node::user
INSTR: send to '[e-mail]'
INSTR:   or to '[e-mail]'

FROM: internet
TO: sprintmail
RECIPIENT: John Smith at SomeOrganization
INSTR: send to
-  '/G=John/S=Smith/O=SomeOrganization/ADMD=TELEMAIL/C=US/@Sprint.COM'
 Help is available by phoning [phone]

FROM: internet
TO: telecom
RECIPIENT: user
CONTACT: [e-mail] or [phone] (Brian Evans)
INSTR: send to '[e-mail]'
INSTR: User mailboxes consist of a 9 digit number.
INSTR: Eg: the postmaster at viatel could be reached
INSTR: at [e-mail]. User mailbox
INSTR: queries can be directed to: [e-mail]

FROM: internet
TO: thenet
RECIPIENT: user@host
INSTR: send to '[e-mail]'

FROM: internet
TO: web
RECIPIENT: user
CONTACT: [e-mail] or [phone]
INSTR: send to '[e-mail]

FROM: internet
TO: wwivnet
RECIPIENT: number@node
CONTACT: [e-mail] or [e-mail]
INSTR: convert to '[e-mail]'
INSTR: WWCPgate; LOW TRAFFIC SITE, USE SPARINGLY..  Gateway is modem-based,
-      they absorb cost of long distance connects to pick-up and deliver.
-      Keep messages under 10K, use infrequently, do NOT use mail-lists or
-      file/list-server commands.

FROM: keylink
TO: internet
RECIPIENT: John Smith <user@domain>
CONTACT: (G:CUSTOMER, S:SERVICE, O:CUST.SERVICE, P:telememo, C:au)
INSTR: send to '(C:au, A:telememo, P:oz.au, "RFC-822":"John Smith
-  <user(a)domain>")'
INSTR: special characters must be mapped: @->(a), %->(p), !->(b), "->(q)

FROM: mausnet
TO: internet
RECIPIENT: user@domain
CONTACT: sysop@k2
INSTR: send to 'user@domain'

FROM: mci
TO: compuserve
RECIPIENT: John Smith (71234,567)
CONTACT: 267-1163 (MCI Help)
INSTR: at the 'To:' prompt type 'John Smith (EMS)'
INSTR: at the 'EMS:' prompt type 'compuserve'
INSTR: at the 'Mbx:' prompt type '71234,567'

FROM: mci
TO: internet
RECIPIENT: John Smith <user@domain>
CONTACT: 267-1163 (MCI Help)
INSTR: at the 'To:' prompt type 'John Smith (EMS)'
INSTR: at the 'EMS:' prompt type 'INTERNET'
INSTR: at the 'Mbx:' prompt type 'user@domain'

FROM: nasamail
TO: internet
RECIPIENT: user@domain
CONTACT: admin
INSTR: send to '(site:smtpmail,id:<user(a)domain>)'
INSTR: Help is also available by phoning [phone] and at 'admin/nasa'.

FROM: nasamail
TO: nsi
RECIPIENT: host::user
CONTACT: admin
INSTR: send to '(site:smtpmail,id:<user(a)host.DN.NASA.GOV>)'
INSTR: Help is also available by phoning [phone] and at 'admin/nasa'.

FROM: nsi
TO: gsfcmail
RECIPIENT: user
CONTACT: [e-mail]
INSTR: send to 'east::"[e-mail]"'
INSTR: or to 'east::"/PN=user/ADMD=TELEMAIL/PRMD=GSFC/O=GSFCMAIL/C=US/
-      @x400.msfc.nasa.gov'
INSTR: Help is also available by phoning [phone].

FROM: nsi
TO: internet
RECIPIENT: user@domain
CONTACT: east::"[e-mail]"
INSTR: send to 'east::"user@domain"'
INSTR: or to 'dftnic::"user@domain"'
INSTR: or to 'nssdca::in%"user@domain"'
INSTR: or to 'jpllsi::"user@domain"'
INSTR: Help is also available by phoning [phone].

FROM: nsi
TO: omnet
RECIPIENT: user
CONTACT: omnet.service
INSTR: send to 'east::"[e-mail]"'
INSTR: Help also available by phoning [phone] (OMN customers only)

FROM: nsi
TO: sprintmail
RECIPIENT: John Smith at SomeOrganization
CONTACT: east::"[e-mail]"
INSTR: send to
- '/G=John/S=Smith/O=SomeOrganization/ADMD=TELEMAIL/C=US/@Sprint.COM'
INSTR: Help is also available by phoning [phone].

FROM: omnet
TO: internet
RECIPIENT: user@domain
CONTACT: omnet.service
INSTR: send to '(site:internet, id:<user(a)domain>)'
INSTR: Or, enter 'compose manual' at the command prompt.  Choose the Internet
-      address option from the menu that appears.  (Option 3.)
INSTR: Help also available by phoning [phone]

FROM: sinet
TO: internet
RECIPIENT: user@domain
INSTR: send to 'M_MAILNOW::M_INTERNET::"user@domain"'
INSTR:   or to 'M_MAILNOW::M_INTERNET::domain::user'

FROM: sprintmail
TO: internet
RECIPIENT: user@domain
INSTR: send to '(C:USA,A:TELEMAIL,P:INTERNET,"RFC-822":<user(a)domain>) DEL'
INSTR: Help available within the United States by phoning [phone] and
-      pressing '2' on a TouchTone phone.

FROM: sprintmail
TO: nsi
RECIPIENT: host::user
INSTR: send to
-  '(C:USA,A:TELEMAIL,P:INTERNET,"RFC-822":<user(a)host.DNET.NASA.GOV>) DEL'
INSTR: Help available within the United States by phoning [phone] and
-      pressing '2' on a TouchTone phone.

FROM: thenet
TO: internet
RECIPIENT: user@domain
INSTR: send to 'UTADNX::WINS%" user@domain "'

FROM: wwivnet
TO: fidonet
RECIPIENT: First Last ON zone:node/fnet
CONTACT: 1@3469
INSTR: convert to 'First Last ON zone:node/fnet @656'
INSTR: WWIVgate; LOW TRAFFIC SITE, USE SPARINGLY..  Gateway is modem-based,
-      they absorb cost of long distance connects to pick-up and deliver.
-      Keep messages under 10K, use infrequently, do NOT use mail-lists or
-      file/list-servers commands.

FROM: wwivnet
TO: internet
RECIPIENT: [e-mail]
CONTACT: faq-request@9702 or 1@9702
INSTR: convert to 'user#machine.site.domain@506'
-      If 'user' begins with digits, begin address with a quote.
INSTR: WWCPgate; LOW TRAFFIC SITE, USE SPARINGLY..  Gateway is modem-based,
-      they absorb cost of long distance connects to pick-up and deliver.
-      Keep messages under 10K, use infrequently, do NOT use mail-lists or
-      file/list-server commands.
--
 _/\ _ !\ _         @           Milwaukee, WI - A Great Place On a Great Lake
!  _! !! ! !_  ~~  @ ~  ~~
! ! ! !! ! ! !~~__=||_~ ~~~ Computing Services Division - MAINFRAME CONSULTING
! ! ! _! ! ~~~ ~\____/  ~~~  [e-mail]   [e-mail]