home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
TAP YIPL
/
TAP_and_YIPL_Collection_CD.iso
/
PHREAK
/
GENERAL
/
THC_TS10.ZIP
/
THC-FAQ.DOC
< prev
next >
Wrap
Text File
|
1996-05-01
|
6KB
|
98 lines
--------------------------------------------------------------------------------
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
█ █
▀▀▀▀▀▀▀█ █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
█ █ ▄▄▄▄▄ ▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄
█ █ █ █ █ █ █ █
█ █ █ █▄▄▄█ █ █ █▀▀▀▀▀▀▀▀
█ █ █ █ █ █
█ █ █ █ █ █
█ █ █ █▀▀▀█ █ █ █▄▄▄▄▄▄▄▄
█ █ █ █ █ █ █ █
▀▀▀▀▀▀ ▀▀▀▀▀ ▀▀▀▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
█ The Hacker's Choice █
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
THC-SCAN
(c) 1996 by van Hauser/THC of LORE BBS
--------------------------------------------------------------------------------
THC-FAQ.DOC
PROBLEMS - ANSWERS - SOLUTIONS
══════════════════════════════════════════════════════════════════════════════
PROBLEM - QUESTION │ SOLUTION - ANSWER
══════════════════════════════════════════════════════════════════════════════
I run THC-SCAN and I get the error │ This happens with old/bad seriell
message "couldn't initialize port!" │ control chips. Set the baud speed in
│ TS-CFG/Modem_Config to 9600 and it
│ should work.
──────────────────────────────────────────────────────────────────────────────
Everytime I scan I get the modem │ Set the modem S7 Register higher,
response NO CARRIER after xx seconds │ for example add S7=75 to your
and THC-SCAN detects this as CARRIER! │ modem init string.
──────────────────────────────────────────────────────────────────────────────
THC-SCAN does only dial every second │ Set Wait_Between_Calls in TS-CFG
number. It's always one number falsely│ /Modem_Config higher.
ID'ed as Carrier before really dialing│
and the other one dialed normally. │
──────────────────────────────────────────────────────────────────────────────
Sometimes characters seems to be lost.│ You have a slow modem. Set Char_Delay
│ higher in TS-CFG/Modem_Config.
──────────────────────────────────────────────────────────────────────────────
The 2nd modem init strings seems not │ Set Wait_Between_Commands higher
to be sent to the modem. Also │ in TS-CFG/Modem_Config.
sometimes commands seems not to be │
executed. │
──────────────────────────────────────────────────────────────────────────────
When I execute a program from THC-SCAN│ This happens only if no Fossil Driver
the computer freezes sometimes. │ is loaded and the modem returns a
│ response while executing.
│ Loading the fossil driver prevents
│ this. (You don't need to turn
│ Use_Fossil on!)
│ NOTE : This is of course a bug.
│ I'll try to fix that.
──────────────────────────────────────────────────────────────────────────────
I want to run multitaskers. │ Just run them. If you run Windows/OS2
What to do? │ you must use the command line option.
│ /W:<number> where you should try 5-15
│ as number. If you run Desqview then
│ check out if you get away better with
│ the /W option or internal auto-detect.
──────────────────────────────────────────────────────────────────────────────
I've got 2 modems on my PC (and/or) │ Read Section "Using 2+ modems for
I've got a network with 5 nodes with │ scanning" in THC-SCAN.DOC, Sec. I.
modems. How can I use this? │
──────────────────────────────────────────────────────────────────────────────
My line(s) went busy some time after │ Your phone company seems to recognized
I started scanning! │ your scanning. Read Section
│ "How to prevent scan detection"
│ in THC-SCAN.DOC, Sec. I
│ BUT this might also be a crash from
│ your local phone company! Try your
│ other lines. If they are busy too
│ it was just a crash ... otherwise ...
──────────────────────────────────────────────────────────────────────────────
I want to scan via blueboxing (and/or)│ Read Section "Using an external
I want to scan via my magic/blackbox │ dialer" in THC-SCAN.DOC, Sec. I.
device! How? │
──────────────────────────────────────────────────────────────────────────────
My modem does a voice recognition │ Put a "," into DIAL SUFFIX in the
response without even finished │ MODEM CONFIG Menu in TS-CFG.
dialing. │
──────────────────────────────────────────────────────────────────────────────
My modem does a tone recognition │ Put a "," into DIAL SUFFIX in the
response without even finished │ MODEM CONFIG Menu in TS-CFG.
dialing. │
══════════════════════════════════════════════════════════════════════════════