home *** CD-ROM | disk | FTP | other *** search
- -------------------------------------------------------------------------------
- SONY CM-P11 Portable
- -------------------------------------------------------------------------------
- NAM Type: EEPROM
- Manufacturer: SONY
- Programmer: Handset
- ESN Prefix DEC: 154
- HEX: 9A
- ESN, S/N Match Required: Yes
- Stamped Model Number: CMP11K
- Number of Channels: 832
-
- Programming Sequence: Install charged portable battery
- Power On
- Enter #.+ 5118762 (To program NAM 1) or * +
- 413897 (To program NAM 2)
- NAM 1 must be programmed before NAM 2
- Once access code is entered, SID will display
- Enter parameter then press SEND to increment
- Press END to enter data and exit program mode
-
- # of Digits
- System ID: 5 XXXXX + SEND
- Mobile Number: 7 XXX-XXXX + SEND
- Unlock Code: 4 XXXX + SEND
- Area Code: 3 XXX + SEND
- Local Use: 1 1 + SEND
- MIN Option; 1 1 + SEND
- Station Class: 2 10 + SEND
- Initial Paging Chan.: 3 333 or 334 + SEND
- Access Overload: 2 XX + SEND
- Preferred System: 1 (0=B or 1=A) + SEND
- Group ID: 2 XX + SEND
- End-to-End Signaling: 1 1 + SEND
- Rep Opt: 1 1 + SEND
- Horn Alert: 1 0 + SEND
- Handsfree: 1 X + SEND
- Options(1): 3 XXX
-
- (1) Options Redial = 1
- Roam Inhibit = 2
-
- Add assigned numbers to enable function (ie, to enable both redial and
- roam inhibit enter 1+2=3). A second example would be to enable redial
- and disable roam inhibit you would enter 1 (1+0=1)
-
- Display ESN: Power On
- Enter 07386260 (within 10 seconds)
- "Selftest No" will display
- Enter 10+SEND
-
- Multiple NAM Select: F + 4 (Simultaneously for 2 seconds)
- New Unlock Code: NAM
- System Select: F + 4 + 4 + 4 etc.. (To scroll choices)
- Standard (AB or BA)
- A Only
- B Only
- Home
-
-
-