home *** CD-ROM | disk | FTP | other *** search
- -------------------------------------------------------------------------------
- MEI CT2000
- -------------------------------------------------------------------------------
- NAM Type: EEPROM
- Manufacturer: MEI
- Programmer: Handset
- ESN Prefix DEC: 167
- HEX: A7
- ESN, S/N Match Required: Yes
- Stamped Model Number: CT 3000
- Number of Channels: 832
-
- Programming Sequence: Power On
- Enter program sequence: 12358 + * + 0 + #980 + #
- Press 1 to enter program mode
- Select NAM 1 or 2
- Enter information for each step then press
- * to increment
- Press END to write NAM information or select
- NAM 2 and repeat progress to program 2nd
-
- # of digits
- System ID: 5 XXXXX + *
- Local Use: 1 1 + *
- MIN Option: 1 1 + *
- Mobile Number: 10 XXX-XXX-XXXX + *
- Station Class: 2 08 + *
- Initial Page Channel: 3 333 or 334 + *
- Access Overload: 2 XX + *
- Preferred System: 1 0 (B) or 1 (A)
- Group ID: 2 XX + *
- Lock Code: 3 XXX + *
- End-to-End Signalling: 1 1 + *
- Repertory Option: 1 1 + *
- Horn Alert: 1 1 + *
- Handsfree: 1 1 + *
- Sec Code: 3 XXX + *
-
- Press END to write NAM information
-
- Horn Alert: FCN + 9
- New Unlock Code: NAM
- System Select: FCN + 0 + RCL + RCL + RCL, etc...
- (Until one of the following prompts appears)
- Standard AB or BA
- Inverse (Alternate BA or AB)
- A Only
- B Only
- Home
-
- Press STO to enter selection + CLR to exit.
-
- -------------------------------------------------------------------------------
- MEI CT3000
- -------------------------------------------------------------------------------
- NAM Type: EEPROM
- Manufacturer: MEI
- Programmer: Handset
- ESN Prefix DEC: 167
- HEX: A7
- ESN, S/N Match Required: Yes
- Stamped Model Number: CT 3000
- Number of Channels: 832
-
- Programming Sequence: Power On
- Enter program sequence: 12358 + * + 0 + # + 980 + #
- (must be inputed within 10 seconds)
- Press 1 to enter programming mode
- Select NAM 1 or 2
- Enter infomation for each step then press
- * to increment
- Press END to write NAM infomation or select
- NAM 2 and repeat progress to program 2nd
-
- # of digits
- System ID: 5 XXXXX + *
- Local Use: 1 1 + *
- MIN Option: 1 1 + *
- Mobile Number: 10 XXX-XXX-XXXX + *
- Station Class: 2 08 + *
- Initial Page Channel: 3 333 or 334 + *
- Access Overload: 2 XX + *
- Preferred System: 1 0 (B) or 1 (A)
- Group ID: 2 XX + *
- Lock Code: 3 XXX + *
- End-to-End Signalling: 1 1 + *
- Repertory Option: 1 1 + *
- Horn Alert: 1 1 + *
- Handsfree: 1 1 + *
- Sec Code: 1 1 + *
-
- Press END to write NAM information
-
- Horn Alert: FCN + 9
- New Unlock Code: NAM
- System Select: FCN + 0 + RCL + RCL + RCL, etc...
-
- (Until one of the following prompts appears)
- Standard (AB or BA)
- Inverse Alternate (BA or AB)
- A Only
- B Olny
- Home
-
- Press STO to enter selection + CLR to exit.
-
- -------------------------------------------------------------------------------
- MEI HT5000 portable
- -------------------------------------------------------------------------------
- NAM Type: EEPROM
- Manufacturer: MEI
- Programmer: Keypad
- ESN Prefix DEC: 167
- HEX: A7
- ESN, S/N Match Required: Yes
- Stamped Model Number: HT 5000
- Number of Channels: 832
-
- Programming Sequence: Fully charges battery on phone
- Power On
- Connect program adapter to bottom of phone or
- jumper pin #1 and pin #5 while pressing PWR button
- Enter individual parameter then press RCL to store
- data and increment
- SND or MUT may be pressed to scroll program parameters
- Press END to write NAM information
-
- # of digits
- System Select Feature: 1 1 + RCL
- Low Battery Alarm: 1 1 + RCL
- Memory Locations: 1 0=10 or 1=100 + RCL
- Enable Roaming: 1 1 + RCL
- End-to-End Signalling: 1 1 + RCL
- Horn Alert: 1 1 + RCL
- Repertory Option: 1 1 + RCL
- Music on Mute: 1 1 + RCL
- Enable Timer Reset: 1 1 + RCL
- Status Meter: 1 1 + RCL
- Not Used: 1 0 + RCL
- Resettable Timer: 1 0 + RCL
- Restrict own Num Display: 1 0 + RCL
- Not Used: 1 0 + RCL
- Not Used: 1 0 + RCL
- Not used: 1 0 + RCL
- Lock Select: 1 0=Total lock, 1=Outgoing Lock,
- 2=Partial Lock + RCL
- Unlock Code: 1-10 XXX + RCL
- Backlight Timer: 256 10 + RCL
- Mobile Number: 10 XXX-XXX-XXXX + RCL
- System ID: 5 XXXXX + RCL
- Initial Paging Channel: 3 333 or 334 + RCL
- Station Class: 2 10 + RCL
- Preferred System: 1 1(A) or 0(B) + RCL
- MIN Option: 1 X + RCL
- Access Overload: 2 XX + RCL
- Group ID: 2 XX + RCL
- Local Use: 1 1 + RCL
-
- The program sequence will now repeat the last 8 steps for a second NAM.
- If you wish to program only one NAM, press END to exit. Once end is pressed,
- wait 5 seconds, for the phone to complete the program process. After the
- programming is complete, power phone OFF and remove the program adapter.
-
- Multiple NAM Select: RCL + # + 6 (repeatedly until new
- number and correct system select appears)
- New Unlock Code: NAM
- System Select: RCL + # + 6 + 6 + 6 + 6 etc...
- (One of the following prompts will display)
- Standard (AB or BA)
- Inverted (Alternate BA or AB)
- A only
- B only
- Home
-
- Press CLR to exit.
-
-
-