home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
TAP YIPL
/
TAP_and_YIPL_Collection_CD.iso
/
PHREAK
/
BOXES
/
ROUTING.TXT
< prev
next >
Wrap
Text File
|
2000-01-11
|
9KB
|
201 lines
At&t/BOC Routing Code
The following is a list of routing codes used by AT&T and Bell Operating
Companies (BOC) that you can blue box to. Most codes are used by dialing
KP+NPA+XXX+ST where XXX= the code, except where noted. There are notes
attached after this list. Codes marked with a ? are unfamiliar to us.
000 - The Rate Quote System (RQS) (1)
001 - 005 Spare (2)
006 - 008 Reserved (3)
009 RQS
010 Reserved
011 International Origination Toll Center (IOTC) (15)
014 TWX Switching Plan (Canada) (?)
015 - 071 Spare
072 - 079 Reserved
080 - 081 Spare
082 - 087 Reserved
088 Spare
089 Reserved
090 - 099 Spare
100 Plant Test - balance termination
101 Plant Test - test board
102 Plant Test - Milliwatt tone (1004 Hz)
103 Plant Test - signaling test termination
104 Plant Test - 2-way transmission and noise test
105 Plant Test - Automatic Transmission Measuring System /
Remote Office Test Line (ROTL)
106 Plant Test - CCSA loop transmission test
107 Plant Test - par meter generator
108 Plant Test - CCSA loop echo support maintenance
109 Plant Test - echo canceler test line
110 - 119 Operator Codes
115 Operator Leave Word
116 Inward DA
120 Network Emergency Center (?)
121 Inward Operator (9)
122 AT&T Ready line INWATS (4)
123 - 130 Reserved
131 Directory Assistance
132 - 137 Reserved
138 IDDD for Equal Access (7)
139 - 140 Reserved
141 Rate and Route (10)
142 -147 Reserved
148 points not on an NPA - Hermosillo, Mexico (5)
149 Reserved
150 Cable Control (Satellite Avoidance) - Hawaii (5)
151 International Assistance
152 - 157 Reserved
158 Operator Assistance for Equal Access (7)
160 International Operator Center (IOC) (6)
161 Trunk Trouble Reporting
162 - 167 Reserved
168 points not on an NPA - Grenada
169 - 170 Reserved
171 points not on an NPA - Monterey, Mexico
172 points not on an NPA - Dominican Republic, Puerto Rico,
Virgin Islands (Canada only)
173 Reserved
174 Cable Control (Satellite Avoidance) Caribbean
175 Reserved
176 points not on an NPA - Mexicali, Mexico
177 - 178 Reserved
179 points not on an NPA - Grenada
180 points not on an NPA - Mexico Numbers
181 Toll Station
182 International Switching Center (ISC) White Plains, 5 (14)
183 ISC New York, BW24
184 ISC Pittsburgh
185 ISC Atlanta OLT
186 ISC Sacramento
187 ISC Denver/Sherman Oaks (?) (15)
188 ISC New York, 5450
189 points not on an NPA - Mexico City, Mexico
190 points not on an NPA - Mexico Numbers
191 Conference loop around
191 AT&T Advanced 800 intercept recording frames (4)
192 Reserved
193 Cable Control (Satellite Avoidance) - Grenada
194 points not on an NPA - Tijuana, Mexico
195 AT&T Advanced 800 (4)
196 AT&T International 800 (4)
197 Reserved
198 AT&T International City Service Center (ICSC)
199 Cable Control (Satellite Avoidance) - Alaska
199 AT&T USA Direct (4)
4 or 5 digit codes (8)
1150,11501 Universal or Coin Callback
1151,11511 Conference Operator (11)
1152,11521 Mobile Service / Air-Ground
1153,11531 Marine Service (12)
1154,11541 Toll Terminal
1155,11551 Time and Charges callback
1156,11561 Hotel / Motel callback
1157,11571 IOTC access trunk
1158,11581 Inward- completion assistance (BOC)
1159,11591 Inward- busy line verification (BOC)
1160,11601 Calling Card Validation - dial pulse equipment (13)
1161,11611 Calling Card Validation - DTMF equipment
1162,11621 Calling Card Validation - MF equipment
Notes:
1. The Rate Quote System is a voice response system used by operators to
obtain routing information. The system, now being phased out, was used
as an alternative to calling the Rate and Route operator. Operators
would key-in required routing information and a synthesized voice
would respond. Though the RQS is still operational, operators now
obtain routing information from COMPIS (See note 10).
KP+DD+ONPA+NXX+TNPA+NXX+ST to get the "rate step" for:
DD = 00 Now
DD = 01 Day Call (08:00-17:00)
DD = 02 Evening Call (17:00-23:00)
DD = 03 Night Call (23:00-08:00)
KP+04+? Something with Mexico, unclear.
KP+05+NPA+NXX+ST Gives the routing for a BOC inward (See note 9)
KP+06+NPA+NXX+ST gives the routing for for an AT&T inward operator
(See note 9)
KP+07+XXXXXXX+ST Reads back the numbers you just typed
KP+08+? Something with Enterprise and Zenith numbers, unclear.
KP+09+NPA+NXX+ST Gives you the current time for the area and exchange
just dialed.
2. When a code is marked spare, that means that there is no current or
planned networkwide usage. It still may be utilized as a non-standard
POTS exchange for WATS service by local companies.
3. When a code is marked reserved, it means that there may be planned
networkwide usage.
4. This code is used by an AT&T custom service. It may be thought of as
acting like a special area code and takes the following dialing
format: KP+XXX+YYY+YYYY+ST where XXX is the code in question and Y can
be any number 0-9.
5. All "points not on an NPA" and "Cable Control" function as pseudo area
codes and are followed by a telephone number.
6. Calls to the IOC are dialled as follows: KP+160+CCC+ST CCC=Country
Code (i.e. 044 or 144 for the UK).
7. These are special codes used with Equal Access. They are as follows:
KP+138+PIC+ST then KP+CC+cc+xxxxx+ST KP+158+PIC+ST
Where PIC is the primary carrier code, CC is the country code and cc
is city code. xxxxx is subscriber number. We are not sure exactly when
and where these are used.
8. All four and five digit codes are dialed as follows: KP+NPA+XXXX+ST or
KP+NPA+XXXXX+ST. Keep in mind that not every code is in use in every
NPA.
9. The format for an AT&T inward is usually KP+NPA+121+ST -- In some
small cities there is an extra code used called a Terminating Toll
Centre (TTC) or sometimes just a city code. If a TTC is used, the
format is KP+NPA+TTC+121+ST. To get an inward with most BOCs you dial
KP+NPA+11591+ST but there are some which use a format of
KP+NPA+TTC+121+ST. To get the inward routing for a particular
exchange, use the Rate Quote System (RQS).
10. The number for Rate and Route was 800+141+1212 but this was
discontinued sometime last year (1987) when the TSPS operators got a
computer terminal called COMPIS. In each there is an inward which acts
like a Rate and Route operator. In New York it is 716+121.
11. With the advent of Alliance Teleconferencing, use of the conference
operator dwindled. There are currently four operator handling
conferences. They are as follows: Atlanta 404+11511, Minneapolis
507+11511, New York 212+11511 and Oakland 415+11511. 800-225-0233
translates to the conference operator closest to you.
12. The Marine Operator is used in calling ships that are close to the
United States. There is an operator called the "High Seas" operator
who can be reached by dialing 800-SEA-CALL (800-732-2255). The High
Seas operator is a service of AT&T, while Marisat is an independent
company. A High Seas call can go to any ocean for $14.98 for the first
3 minutes and $4.98 for each additional minute. A Marisat only to
three oceans and costs $10 a minute.
13. 116X and 116XX are used to verify an AT&T Calling Card number. You
dial KP+NPA+116XX+ST when you hear a "bong" you dial the calling card
number. If you use 11611 you enter the number in Touch Tone and if you
use 11621 you enter the card number in MF using KP and ST.
14. These ISC codes are used to provide alternate routing for
electro-mechanical switches. Some older electro-mechanical switches,
for example #5 Crossbar (5XB) cannot outpulse 011+CCC (CCC=Country
Code) for international dialing. AT&T has set up these special codes
to handle international calls. A 5XB can dial KP+18X+ST. They would
then receive a wink (short blast of 2600 Hz) and would proceed to dial
the country code and number. If you want to make an international call
you dial KP+(NPA)+18X+ST where the NPA is optional. After the wink
dial the country code, city code and number. The "," after the city
name is the switch number if there is more then one 4-ESS in that
city.
15. The 187 code was assigned to Atlanta until up to the end of February
1988. AT&T is in the process in routing the calls to the Sherman Oaks
Office in California.
16. To make international calls dial KP+011+CCC+ST where CCC is the
country code; and then dial KP+CC+XXXXXXX+ST where CC is the city code
and XXXXXXXX is the telephone number.