home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
TAP YIPL
/
TAP_and_YIPL_Collection_CD.iso
/
PHREAK
/
BOXES
/
DIVERTER.TXT
< prev
next >
Wrap
Text File
|
1995-12-24
|
8KB
|
144 lines
OoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoO
oO Oo
Oo Building a Diverter Box oO
oO Designed by: Oo
Oo Digital Deviant oO
oO Oo
OoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOo 5/12/91 oOoO
Does the Menace of ESS have you down?? Tired of worrying about getting
nabbed everytime you phreak?? Well then the Diverter Box is for you.
A few years back I got plans for a box called the Gold Box. Most hackers
soon found out that the Gold Box did not work after trying to construct it.
The Gold Box design was totally fucked. I still see the plans on many
boards to this day. Even though they don't work. But it is those plans
inspired me to design the Diverter Box. The construction is fairly simple
and cheap. You can get all of the needed parts at your local Radio sHACK.
PARTS NEEDED:
=QTY=========ITEM====================================CAT NO======PRICE=======
3 SPDT MICROMINIATURE PC RELAY 275-240 $1.99 EACH
2 NEON LAMPS 272-1100 $ .89 EACH
2 PHOTOCELLS 276-1657 $1.98 FOR 5
1 200V SILICON CONTROLLED RECTIFIER (SCR) 276-1067 $ .99
1 1:1 AUDIO TRANSFORMER 273-1374 $3.59
1 9V BATTERY SNAP CONNECTOR 270-325 $1.19 FOR 5
1 9V BATTERY
- SOME WIRE, ELEC TAPE AND SOLDER
=============================================================================
CONSTRUCTION/ PLANS:
Ok, take the Neon Lamps and the Photocells and tape them together with the
electrical tape or any tape that will not allow light in. Tape them
together so that the Neon Lamp will shine directly on the photocell. Make
sure that no light can get in. Ok, now you will have two separate
Optocouplers. In the plans they will be labeled MOC1, and MOC2. It would
be best to print the plans out, so you can see the whole thing at one time.
BLACK RED
───────────────────────────┬───────────┬─────────────────────────────────────
│ AUDIO │
Connect Wires to FONE #1 │ TRANSFORMR│ Connect Wires to FONE #2
────────────┐ ├───────────┤ ┌──────────────────────
WHITE │ W│ ┌──┘ │ YELLOW
│ H│ │Y │
│ I└───┐ │E │
│ T │ │L │
│ E │ │L │
│ ┌────────────┐ │ │W ┌────────────┐ │
└─┼─oNO NCo │ │ └──┼─oNO NCo │ │
┌──┼─o COIL o─┼───│───────┼─o COIL o─┼─│────────┐
│ │ │ │ │ │ │ │
│ │ │ │ │ │ │ + │
│ │ o COM o─┼───┘ │ o COM o─┼─┘ │
│ └────────────┘ └────────────┘ │
│ RELAY #1 RELAY #2 │ - NEGATIVE
└─────────────────┐ └───┬────────┐
┌────────────┐ │ │ 9V │
│ oNO NCo─┼─┘ │ BATTERY│
┌────┼─o COIL o─┼───┐ ┌───────────────────┐ ┌─┴────────┘
│ │ │ │ │ ┌───────────┐ │ │ + POSITIVE
│ │ │ │ │ │ ┌─o─┐ │ │ │
│ │ o COM o─┼───+────────┘ │ SCR ├───┤ │ │ └┐
│ └────────────┘ │ ├─┬─┤ │ │ │
│ RELAY #3 │ │ │ │ │ │ │
│ - │ 1 2 3─┘ │ │
│ Connect wire to the │ │ │ │ │ │
│ NEGATIVE terminal on│ │ └────────┘ │
│ Battery │ │ │ │
│ ┌───────────────────┘ │ └────────────+
│ │ │ │
│ │ PHOTOCELL │ │
│ │ LEADS └────────────┐ │
├───────┤ │ │
│ MOC1 │ │ │ PHOTOCELL
├───────┤ │ │ LEADS
│Connect│ NEON LAMP │ │
│ to │ LEADS │ │
│FONE #3│ ├───────┤
│ │ │ MOC1 │
├───────┤
│Connect│ NEON LAMP
│ to │ LEADS
│FONE #1│
│ │
USAGE/ TIPS:
You can probably find a better way to connect everything. I just drew the
schematics like that so they would be easy to understand. In the areas
where a wire crosses over another wire DO NOT connect them, UNLESS there
is a "+" sign where the wires cross. Now solder all the shit together.
The polarity on the Fone lines doesn't matter. So you won't have to spend
time and frustration trying to get the proper polarity connections. As you
may have noticed you will need three fone lines. FONE #1 will be the
number you call to get a dial tone. FONE #2 is the fone line that you will
be dialing out from. You will call FONE #3 to disconnect FONE #1 and FONE
#2, in other words you will call this number to cause them to hang up.
If you know anything about electronics you could hook up a tone detecting
chip that would activate RELAY #3 when a certain tone is played. This
would cause the fones to hang up. FONE #2 MUST be a regular fone line.
FONE #1 and FONE #3 can be a Pay Fone Line or a regular Fone Line. A good
place to hook this up would be at a Jiffy that has two pay fones. But you
would not be able to use your box until they close. Your best bet would be
to hook it up at a big hotel or motel. They have plenty of pay fones. You
may have to run some wire to connect to their PBX, but it can be done.
After you've got the device hooked up ANI Fone #1 and Fone #3... Now your
all set. Dial with care, but dial any where. Have phun!
DISCLAIMER:
This file is for INFORMATIONAL Purposes ONLY. The Diverter Box is not to
be used in any illegal manner (Yeah, thats it). I do NOT take any
responsibility for your actions!
CLOSING:
If you have any Problems, Suggestions, Threats or Corrections, I can always
be contacted on one of the Boards listed below. Have fun and watch out
for BELL SECURITY (Fuck them!).
Later,
Digital Deviant
N.O.A.
(New Order Alliance)
OoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoOoO
oO Call these H/P Boards: Oo
Oo oO
oO SHOT IN THE DARK (Home of N.O.A.)....................904/389-0006 Oo
Oo I.H.A. HeadQuarters.(Home of I.H.A.)6pm. to 8am.......904/272-4759 oO
oO Oo
OoOoOoOoOoOoOoOoOoOoOoOoO (k) 1991 Digital Deviant oOoOoOoOoOoOoOoOoOoOoOoOoO