home *** CD-ROM | disk | FTP | other *** search
- Introduction
- ============
-
- This program is a fast assembler capable of assembling and linking files
- on a PC for a Z80 target and creating binary or intel hex format files
- suitable for programming an EPROM. Files suitable for the remote debugger
- are also produced. The program maintains files in a project which enables
- all files involved in the project to be tracked and assembled and linked.
-
-
- Installation
- ============
-
- Run the install program from the Windows Program manager. The only prompt is
- to request the directory that you wish to install the program to which will
- be created for you if it has not yet been created.
-
- After installation create an icon for the program in the Program Manager
- group from which you wish to run the program.
-
- Registration Information
- ========================
-
- This program is shareware, should you decide that you wish to use it for
- serious purposes - in practice any project which results in code used on a
- Z80 or a simulator, then you must register it.
-
- Registration costs 20.00 pounds or $30.00, and should be made payable to
- "Robin Abbott" at the following address:
-
- 37 Plantation Drive
- Christchurch
- Dorset
-
- ENGLAND
-
- BH23 5SG
-
- Registration entitles you to a printed manual, technical support and an
- evaluation copy of the next version of the program free of charge.
-
- To obtain the evaluation copy of the remote symbolic monitor/debugger
- which links in with debugging information produced by the debugger and which
- runs on a PC inconjunction with a Z80 monitor send 5pounds or $10.00 to the
- same address.
-