home *** CD-ROM | disk | FTP | other *** search
- **************************************************************
- Sample README file
- Version 1.01
- **************************************************************
-
- Thank you for trying INSTALL. This is a template for
- what might be a good file to use in this situation.
- Feel free to modify it to suit your needs.
-
- For complete documentation on using InstallWare, view
- the file INSTALL.TXT.
-
- **************************************************************
-
- If you have an aversion to Install programs, you can
- manually install ****** by doing the following:
-
- Note: ONLY DO THIS IF YOU ARE MANUALLY
- INSTALLING. IF YOU WANT THE INSTALLER
- TO DO THE WORK, THEN PRESS THE CONTINUE
- BUTTON AND SIT BACK.
-
- 1. Press the Continue button to close this readme file.
- 2. At this point the installation process will begin.
- 3. Press the Cancel button to stop it and go to DOS
- (or use the File Manager to perform the equivalent steps
- described below).
- 4. Make a ***** directory (call it what you want).
- 5. COPY *****.EXE and *****.HLP to the *****
- directory.
- 6. Back in Windows, install the icon in whatever Program
- Group you wish.
-
- If any of these instuctions don't make sense, then use the
- Install program to do it for you.
-
- Again thank you for your support, and feel free to contact
- me with any questions, problems, or suggestions at:
-
- Bob Dolan
- P.O. Box 16514
- Rochester, New York 14616
- 716-865-8248
-
- Good Luck! and have fun!
-