home *** CD-ROM | disk | FTP | other *** search
- ComMotion Evaluation
-
-
- To create installation disks:
-
- You need to have all three of the evaluation archives.
-
- CMotion1.zip
- CMotion2.zip
- CMotion3.zip
-
- De-compress these into a newly created directory.
- Make sure you have 3 blank formatted floppy diskettes at least 720Kb in size
- (1.2Mb or 1.44Mb is ok).
-
- Place the first diskette into the floppy drive and type
-
- Disk1 a: ( Where A: is the floppy drive you wish to use )
-
- This will create the first disk.
-
- Follow the same steps to create disks 2 and 3, substituting the
- commands disk2 a: and disk3 a: appropriately.
-
- To Install ComMotion Evaluation:
-
- Once you have created the three disks, you can then go ahead and install
- from them:
- Run Windows.
- Select File|Run
- And type A:install (where A: is the floppy drive used)
- The ComMotion Evaluation installtion will then proceed.
-
-