home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Sparkle Graphics Model 217
/
SPCD.iso
/
MANUAL.TXT
< prev
next >
Wrap
Text File
|
2000-12-07
|
4KB
|
76 lines
************************************************************************************
* Smartinstall could not detect the default Plug and Play driver installed *
* Please follow the installation procedure doing the driver installation. *
* *
* Manual.txt Topics --- <A> Windows 2000 Install Procedure *
* <B> Windows NT4 Install Procedure *
* <C> Troubleshooting for Windows 2000 *
* <D> Troubleshooting for Windows NT4 *
************************************************************************************
=============================================================================================
<A> Windows 2000 Install Procedure -- Display Driver installation procedure for Windows 2000
=============================================================================================
1. Start Microsoft Windows 2000.
2. Click the Start button on the control bar >> point to Settings >> click Control Panel.
3. Double-click Add/Remove Hardware >> Next >> Add/Troubleshooting a device
4. Auto detect by Window 2000 >> Next
5. Found New Hardware >> Put DRIVERS CD in the CD driver and select CD-ROM drives
6. Windows found a driver for this device >> next >> finish
7. Restart Window 2000 (MicroSoft default Plug and Play driver installation complete)
=============================================================================================
<B> Windows NT4 Install Procedure -- Display Driver installation procedure for Windows NT4
=============================================================================================
1. Start Microsoft Windows NT4.
2. Click Mouse right button on the Desktop >> Click properties (View "Diskplay Properties")
3. Click Settings >> Click Display Type.. >> click Change >> Have Disk.. >> Click Browse..
4. If show "A:\ is not accessible.." Click Cancle (Drivers on CD not Disk A: )
5. Click look in downbutton to select the CD driver and root directory "Drivers"
6. Select New Hardware and directory "Nt40" >> Bouble-click the inf file >> Click OK
7. Select adapter name then Click OK >> (If need to Click OK) >> finish
8. Restart Window NT4 (Driver installation complete)
=============================================================================================
<C> Troubleshooting for Windows 2000 -- Troubleshooting for the exiting display device
=============================================================================================
1. Start Microsoft Windows 2000.
2. Click the Start button on the control bar >> point to Settings >> click Control Panel.
3. Double-click Add/Remove Hardware >> Next >> Uninstall/Unplug a device >> Uninstall a device
4. Select the device you want to uninstall and Double-Click >> Yes,I want to uninstall this device
5. Next >> Finish
6. Back to follow the previous <<Windows 2000 Install Procedure>>
=============================================================================================
<D> Troubleshooting for Windows NT4 -- Troubleshooting for the exiting display driver
=============================================================================================
1. Start Microsoft Windows NT4.
2. Click the Start button on the control bar >> point to Settings >> click Control Panel.
3. Double-click Add/Remove Programs >> Select the display driver you want to remove
4. Click Add/Remove button >> Yes >> Finish
6. Back to follow the previous <<Windows NT4 Install Procedure>>