home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
470
/
SURVEYP2.ZIP
/
SURVEY.DOC
< prev
next >
Wrap
Text File
|
1993-03-07
|
30KB
|
725 lines
SURVEY POWER (tm)
Version 2.00
Designed to create, analyze, and print out results
to your surveys, questionnaires, and opinion polls.
SURVEY POWER (tm) is a copyrighted program distributed as
SHAREWARE. All rights are reserved. You may make 1 copy of
this program and documentation for a 30 day evaluation.
If you decide to continue to use this program, you must pay a
registration fee of $39.95 plus $2.00 shipping/handling. Checks,
MasterCard, and VISA are accepted. Purchase orders are accepted
from schools and Fortune 1000 companies. Building site licenses
are also available. All references to SHAREWARE and evaluation
software are removed from the print outs of the registered
versions of this program. To order the registered version, use
the order blank that can be printed from the pull down menu.
Registered owners will receive a printed manual, diskette with
all improvements since the distribution of the shareware
diskette, removal of all references to evaluation shareware,
notification of major updates, and voice telephone support.
This program can only be updated and improved when you support
my efforts.
(C)Copyright Terry L. Jepson 1991-1992
Published by WISCO COMPUTING, P. O. Box 8,
Wisconsin Rapids, WI 54495-0008
WISCO COMPUTING, Attn: Terry L. Jepson,
P. O. Box 8, Wisconsin Rapids, WI 54495-0008
Modem support is available on the Rapid River BBS (715) 435-3855
(Free access 300 to 38,400bps V.32bis/V.42bis 24 hr 8/N/1)
MasterCard and VISA orders accepted (715) 423-8189
Voice support is only available to registered users.
The information contained in the SURVEY POWER program and manual is
believed to be accurate and reliable. However, no responsibility
is assumed by the author or WISCO COMPUTING for it's use. The
author or WISCO COMPUTING shall not be liable for any direct,
incidental, or consequential damages resulting from the use of the
SURVEY POWER program or this manual. Comments on this publication
and on SURVEY POWER are invited.
SURVEY POWER is a trademark of WISCO COMPUTING. The computer
hardware, software, and printer names used in this manual are the
trade names and/or trademarks of their respective owners.
TABLE OF CONTENTS
1-1 General Information
1-2 System Requirements
1-3 Capabilities of Survey Power
1-4 Installation
1-5 Starting Survey Power
1-6 The Menu Bar
FILES MENU
2-1 New
2-2 Load a Survey
2-3 Create a Survey
2-4 Entering Survey Questions
2-4-1 Cursor Movement
2-4-2 Question Types
2-4-3 Entering Response Text
2-5 Adding Survey Questions
2-6 Editing Survey Titles
2-7 Editing Survey Questions and Response Text
2-8 Deleting Survey Questions
2-9 Print Blank Surveys
2-10 Shell to DOS
2-11 Quit SURVEY POWER
RESPONSE MENU
3-1 Record Responses
3-2 Revise Responses
COMPLETE AND PARTIAL MENUS
4-1 Information
4-2 Total Analysis
4-3 Demographic Analysis
4-4 Correlation Analysis
4-5 Text Frequency Analysis
4-6 Numerical Detail Analysis
4-7 View Analysis
4-7-1 Viewing A Complete or Demographic Analysis
4-7-2 Viewing A Correlation Analysis
4-7-3 Viewing A Text Frequency Analysis
4-7-4 Viewing A Numerical Detail Analysis
4-8 Printing an Analysis
4-9 Export to an ASCII file
4-10 Export to a Lotus .WKS file
4-11 Saving Survey Data
SETTINGS MENU
5-1 Regular Data Drive
5-2 Export Data Drive
5-3 Matching Data
5-4 Printer Selection
5-5 Method to Calculate Surveys
5-6 Saving the Settings
EXTRA MENU
6-1 Reset the Printer
6-2 Advance the Paper
6-3 Form Feed the Printer
6-4 Change Screen Colors
6-5 Back Up Survey Power Files
6-6 History of Version 1.00
6-7 History of Version 1.10
6-8 History of Version 1.20
6-9 Specialized Needs
1-1 GENERAL INFORMATION
SURVEY POWER is specifically designed to be simple to understand
and easy to use. It requires very little knowledge of computers.
No commands need to be memorized. The menus allow easy movement
through the program so you can begin survey analysis in just a few
minutes.
The Status Line at the bottom of the screen displays the name of
the currently loaded survey file.
1-2 SYSTEM REQUIREMENTS
IBM PC, XT, AT, OR PS/2 or compatible 512K
One disk drive or hard drive
Blank formatted diskette for survey and data storage
Supported printer
MS-DOS version 2.1 or later
1-3 CAPABILITIES OF SURVEY POWER
SURVEY POWER can create surveys consisting of single choice,
multiple choice, text, rank order, and numeric questions. Each
survey can have up to 100 questions. The program will print the
survey, allow recording of survey responses, perform complete,
demographic, correlation, and text frequency analyses of the
responses. Any analysis may be displayed, printed out or saved as
an ASCII file to diskette. The blank survey can also be printed by
a printer or saved as an ASCII file to diskette.
This program can be run on one or two floppy disks or a hard disk.
Files created by SURVEY POWER can be kept on a separate diskette or
subdirectory. The number of surveys that can be counted is limited
only by the storage capacity of your diskette or hard disk and the
limitations of DOS. A mouse can also select files and move through
the menus and displays.
Back ups of all survey and data files created by SURVEY POWER can
be made by using the DOS COPY command or by using the Back-Up
SURVEY POWER files selection of the EXTRA Menu.
1-4 INSTALLATION
INSTALLATION ON FLOPPY DISKETTES
To install SURVEY POWER on a floppy diskette, format the disk with
the command FORMAT/S. Then place this master copy in Drive A:.
Type COPY A:*.* B: and press the Enter key. If you only have one
floppy drive, you will have to exchange disks periodically.
INSTALLATION ON A HARD DISK
You should always make a separate subdirectory for every program
you own. For example, type MD WISCO to make the subdirectory WISCO
Then change to this subdirectory by typing CD WISCO. Then copy
this master diskette from drive A: by typing COPY A:*.*
1-5 STARTING SURVEY POWER
Enter SURVEY to start the SURVEY POWER program. To suppress the
color, start the program by entering SURVEY /B. The introductory
copyright screen is displayed. Press any key to continue. The
Menu Bar will be displayed at the top of the screen.
Some menu selections will be inactive (displayed in red on a color
monitor or with a bullet on a monochrome monitor) until either a
survey question file is loaded or a new file is created.
1-6 THE MENU BAR
SURVEY POWER contains 6 menus. Each menu name is displayed in the
MENU BAR at the top of the display screen. Each menu is explained
in the rest of this manual.
The SIX menus of SURVEY POWER allow easy movement through the
program. The MENU BAR at the top of the screen serves as the
center of this program. Each menu is accessed by making selections
at the MENU BAR.
You can select a menu from the MENU BAR by:
1. Using the left or right arrow keys,
2. Holding down the Alternate key and pressing the first letter
of the menu name, or
3. Placing the mouse cursor on top of the menu name and pressing
the left button of the mouse.
Choices are listed below each menu. Select a choice by:
1. Using the up or down arrow keys,
2. Press the first letter of the choice and press Enter, or
3. Placing the mouse cursor on top of the choice name, then
press the left button of the mouse.
Choices displayed in red letters on a white background, or with a
bullet to the left of the choice can not be selected until other
actions have been taken. For example, you can not view survey data
until a survey file has been loaded. If no responses exist for the
survey question file, some menu choices will remain inactive.
Pressing the ESCape key allows the exit from menu selections.
Quit SURVEY POWER selection on the FILE MENU is the only way to
leave SURVEY POWER. Leaving the program with this selection
insures that all data has been safely written to their files.
If additional information becomes available after this manual is
printed, a file called README will be found on the diskette. To
print a copy of this file type COPY README PRN at the DOS prompt
(C:\>) and press the enter key.
FILE MENU
2-1 NEW
This selection removes all survey questions, responses and
summarized survey data from the computer's memory.
2-2 LOAD A SURVEY
After making this selection, a menu of all survey question files in
the current subdirectory will be displayed. Use the up and down
arrow keys to move the cursor to the file to be selected. Then
press the Enter key.
2-3 CREATE A SURVEY
This selection is used to create a new survey. You will enter a
new survey question file name, title, and survey questions. You
can create as many surveys as you want and store each under its'
own file name on a diskette. The title and subtitles will be
centered on all print outs to a printer or diskette files.
2-4 ENTERING SURVEY QUESTIONS
2-4-1 CURSOR MOVEMENT
You can move between the questions and responses by pressing the up
and down arrow keys. Movement is in a continuous loop, so pressing
the down arrow will immediately take the cursor to the first line
of the question. Editing help is continuously displayed in the
lower part of the display.
Up to 100 survey questions can be entered. Each question in a
survey may be up to three lines long. If the question is shorter
that three lines, leave the remaining question lines blank. If (=)
the equal sign is entered as the first line of the question, the 3
lines of the previous question will be displayed again. This will
speed entry when questions are very similar.
2-4-2 QUESTION TYPE
Five Question Types are currently supported. Question types can
not be revised after any survey responses have been entered. The
question type determines the amount of space that will be reserved
in the response file. Other question types, based on user requests
will be supported in future versions of SURVEY POWER.
TYPE A
Enter the letter A if only 1 of the listed choices will be an
acceptable response. The type A single choice question allows only
one response (ABCDEFGHI).
TYPE B
Enter the letter B if more than one of the listed choices will be
acceptable responses. The type B multiple choice question with no
ranking allows up to 9 letters (ABCDEFGHI) to be entered.
TYPE C
Enter the letter C if the responses are to be ranked from highest
to lowest (1 = highest, 9 = lowest). The program will convert
these rankings and total the ranked weights. (1 will be converted
to a weight of 9, 2 will be converted to a weight of 8, etc. Blank
responses will be assigned a weight of 0).
TYPE D
Press the letter D if the responses to this question will be
numbers (integers) that can be added when the survey is analyzed.
Totals will be valid up to 32767.
TYPE E
Enter the letter E for the question type for text entry of up to 26
characters.
2-4-3 ENTERING RESPONSE TEXT
Up to 9 text responses can be entered for each question. If the 9
responses for a question are the same as the previous question,
enter the equal sign (=) for the first response and press the Enter
key. The responses from the previous question will be quickly
copied to the current question. The tenth response position is
reserved for the no response totals.
To review previous questions, press the PgUp key. To go to the
next question, press the PgDn key. You can save questions and
response text at any time by pressing Alt-S (hold the Alt key down
and press the S key). When you have finished, press the ESCape key
to leave this display. As a safety measure, you will be asked if
you want to save this information before returning to the main
menu. If you did not previously save the questions and responses,
you should press Y for Yes.
2-5 ADD QUESTIONS
This selection adds questions and response text to a previously
saved survey. You can not add any survey questions or response
text after any responses have been recorded for this survey.
2-6 EDIT SURVEY TITLES
This selection is used to edit previously entered survey title and
subtitles.
Editing help is also displayed. Use the Up and down arrow keys to
move between the lines. Press Y when you are ready to continue.
You will be asked if you want to save this information to your
survey file. Answer either Y for Yes or N for No.
2-7 EDITING SURVEY QUESTIONS AND RESPONSE TEXT
This selection is used to edit previously entered question and
response text. Questions and response text may be edited after
responses have been entered. You can not change the question type
or add or delete any questions to a survey after responses have
been entered.
2-8 DELETING SURVEY QUESTIONS
A survey question can only be deleted if no responses have been
entered for this survey.
2-9 PRINT BLANK SURVEY
This selection is used to print a blank survey without response
totals.
2-10 SHELL TO DOS
This selection allows temporary exit to the operating system.
SURVEY POWER remains in memory. To return, type EXIT.
2-11 QUIT SURVEY POWER
This selection is used to leave this program.
RESPONSE MENU
3-1 RECORD RESPONSES
This selection is used to record responses to the selected survey.
The survey was selected when it was loaded from the FILE MENU.
Survey responses are saved after each set of survey responses has
been entered. The number of surveys that can be analyzed is
limited only by the storage capacity of your diskette or hard disk.
Help for movement to different questions and to review previous
questions is displayed near the bottom of the screen. The question
type determines which help messages are displayed.
After the response has been entered to your last survey question,
press Alt-S to Save this set of responses. After saving these
responses, the first question will be displayed again so you can
begin entering your next set of responses.
At any time during the recording of responses, an analysis may be
obtained. The analysis can be either displayed, printed out on
paper or saved as an ASCII file on a diskette. The analysis totals
and percentages will be displayed as more responses are entered.
The type A single choice question allows only one response
(ABCDEFGHI). After pressing one of these letters, the next
question will be displayed.
The type B multiple choice question with no ranking allows up to 9
letters (ABCDEFGHI) to be entered. Press the Tab key to move from
one entry square to the next square. The response letters that are
chosen do not have to be in any particular order.
The type C ranking question allows only the numbers 1 to 9 to be
entered. If the corresponding response is left blank, it will not
be used in the weighting. Press the Tab key to move from one entry
square to the next square. The highest ranking is considered to be
1, the lowest 9. The program will convert these rankings and total
the ranked weights. (1 will be converted to a weight of 9, 2 will
be converted to a weight of 8, etc. Blank responses will be
assigned a weight of 0).
Responses to a type D question are totalled when the survey is
analyzed. Only integers can be entered. Totals up to 32767 will
be valid. Press the Enter key after each number is entered. You
can leave the position blank to represent 0.
The type E question allows for text entry responses. Each response
may be up to 26 characters long. These responses can also be
totalled to find the 20 most common responses.
3-2 REVISE RESPONSES
After selecting the survey file, you will be asked the question
number.
A chart displays the survey number and responses. Scroll through
the chart using the up and down arrow keys to the response to be
revised. The chart will scroll as you reach the top or bottom to
display more responses. Use the tab and shift-tab keys to move
between responses for type B, C, and D questions. After finishing
your revisions, press the ESCape key. The press Y for Yes to save
the revised responses.
COMPLETE AND PARTIAL MENUS
The COMPLETE MENU allows analysis of all surveys questions. The
PARTIAL MENU allows detailed analysis of one or two questions at a
time. Each analysis can be viewed, printed with a printer, or
exported to an ASCII file or Lotus .WKS file.
4-1 INFORMATION
The information selection describes the difference between total,
demographic, correlation, and text frequency analyses.
4-2 TOTAL ANALYSIS
A total analysis calculates totals of all responses and questions.
The question total is calculated based on the question type.
4-3 DEMOGRAPHIC ANALYSIS
A demographic analysis totals all surveys for a user-selected
question and choice. For example, the selected question could have
a choice of either male or female. A demographic analysis provides
totals to all questions when the respondent chose male to the
selected question. A second demographic analysis would provide
totals to all questions when the respondent chose female to the
selected question.
The most reliable results of a demographic analysis are performed
on a type A - single choice question.
4-4 CORRELATION ANALYSIS
A correlation checks for relationships between choices made for two
survey questions. For each choice of the first question, the
totals of all choices of the second question are found. Only
question types A, B, and E support correlation analysis.
4-5 TEXT FREQUENCY ANALYSIS
This analysis is used to determine the frequency of text entries
for a type E question. The 10 most frequent responses can be
displayed when entering and revising responses by performing this
analysis. The 20 most common responses will be included when
totals are printed or saved as ASCII or Lotus .WKS files.
4-6 NUMERICAL DETAIL ANALYSIS
This analysis calculates totals, averages, minimums, maximums, and
response counts for each choice of a selected question. The
selected question must be either Type C or D.
4-7 VIEW ANALYSIS
This selection is used to view data that has been retrieved or
created by an analysis.
4-7-1 VIEWING COMPLETE AND DEMOGRAPHIC ANALYSES
Data from all questions and demographic analysis may also be
modified as it is displayed. Data from correlation and text
frequency can not be modified. Modified data can be saved to the
file by pressing Alt-S. However, it would be changed back to the
original data when another analysis is performed. The best way to
change the data summary would be to revise the responses.
The Up and Down arrows will move the cursor to the data immediately
above or below the current position. Pressing Tab and Shift-Tab
moves the cursor between the data fields. Pressing Alt-P will
print the complete summary of the question with the check mark.
Additional cursor movement directions are displayed at the bottom
of the screen.
Pressing Alt-Q will Quickly Display detailed information about the
question with the check mark. The complete question, response
text, responses, and percentage of total responses will be
displayed. Percentages are calculated to the nearest whole number.
Pressing Alt-A will export the single question summary to an ASCII
file on diskette. ASCII files can be imported in almost any word
processor for final formatting before publication. The file name
will be Q##.ASC. The ## will be replaced by the question number.
Additional cursor movement instructions are displayed at the bottom
of the screen.
4-7-2 VIEWING A CORRELATION ANALYSIS
After selecting two questions to correlate, a chart is displayed
indicating how the responses for the choices of the first selected
question match the choices made for the second selected question.
To print a copy of this correlation summary, press Alt-P.
4-7-3 VIEWING A TEXT FREQUENCY ANALYSIS
After selecting a type E question, the most frequent responses for
the question will be displayed. To print a copy of this text
frequency summary, press Alt-P.
4-7-4 VIEWING A NUMERICAL DETAIL ANALYSIS
This selection will display a chart of the selected Type C or D
question. In addition to the totals, the average, minimum,
maximum, and response count for each choice of the selected
question will be displayed.
4-8 PRINTING AN ANALYSIS
This selection will print the most recently performed analysis with
this menu to the printer.
4-9 EXPORT TO AN ASCII FILE
This selection will create an analysis file on the export drive.
An ASCII file is readable by most programs. The subdirectory must
have been created previously with DOS. If the subdirectory doesn't
exist, the error PATH NOT FOUND will occur. The program will add
the extension .ASC to the survey file name.
The created file will be the last analysis (correlation, text
entry, or numerical detail) that was performed with this menu.
4-10 EXPORT TO A LOTUS .WKS FILE
This selection creates an analysis file on the export drive that
can be read directly by spreadsheet programs that can read .WKS
files. The subdirectory must have been created previously with
DOS. If the subdirectory doesn't exist, the error PATH NOT FOUND
will occur. These files make it easy to graph an analysis with
other programs.
The created file will be the last partial analysis (correlation,
text entry, or numerical detail) that was performed.
4-11 SAVE DATA
Complete, demographic, and correlation summaries are saved with the
survey questions to insure compatibility of question and survey
data.
SETTINGS MENU
5-1 REGULAR DATA DRIVE
This selection is used to change the current drive or sub-directory
that will contain the survey questions and responses. The
subdirectory must have been created previously with DOS. If the
subdirectory doesn't exit, the error PATH NOT FOUND will occur.
After making this selection, you enter the drive and subdirectory.
Enter the word NONE to store the files created by SURVEY POWER in
the same subdirectory (or on the same diskette) as the SURVEY.EXE
program.
5-2 EXPORT DATA DRIVE
This selection is used to change the current drive or sub-directory
that will contain the Lotus .WKS and ASCII files. The subdirectory
must have been created previously with DOS. If the subdirectory
doesn't exit, the error PATH NOT FOUND will occur.
After making this selection, you enter the drive and subdirectory.
Enter the word NONE to store these files created by SURVEY POWER in
the same subdirectory (or on the same diskette) as the SURVEY.EXE
program.
5-3 MATCHING DATA
If there is no matching data, either a zero or space can be
displayed and printed.
5-4 PRINTER SELECTION
The following printers are currently supported by SURVEY POWER.
Epson FX or Epson LQ Okidata
IBM Proprinter Panasonic KX P1091i
Toshiba P351 HP LaserJet/DeskJet
Diablo 630 User Defined
Additional printers may be supported in future versions of SURVEY
POWER. Printer codes for User Defined printers can also be entered
in the program. After the printer is selected, additional
questions about your printer accessories will be asked.
5-5 SAVING THE SETTINGS
This selection must be used to save the settings so they can be
used the next time SURVEY POWER is started.
EXTRA MENU
6-1 RESET PRINTER
This selection will send reset codes to the printer.
6-2 ADVANCE PRINTER
This selection will advance the paper 1 line.
6-3 FORM FEED THE PRINTER
This selection will eject a page from the printer.
6-4 CHANGING THE SCREEN COLORS
Screen colors may be changed to your personal preference, or
because the regular colors may be hard to see on a lap top.
Up to 127 color combinations may be used by SURVEY POWER. When
this selection is made, a chart showing the 127 color combinations
and their associated numbers is displayed.
Following are the default (starting) values for screen colors. You
may enter different numbers from the displayed chart:
Color Monochrome
Normal Screen Colors: 023 007
Help Screen Colors: 113 007
Pull Down Menu Colors: 043 112
Error Colors: 079 112
Text Entry Colors: 112 007
Menu Selection Colors: 007 007
When you have finished entering this information, press the ESCape
key. The enter a number for the mouse cursor color. The number
(1-7) refers to the displayed chart. For example, 4 represents
red. Then you will asked if you want to save these new colors.
6-5 BACK UP SURVEY POWER FILES
All SURVEY POWER files with .SVP, .RTJ, and .ASC can be backed up
with this selection. First you will be asked to enter the Drive
and optional subdirectory to back up the files. If you are backing
up the files to a subdirectory, the subdirectory must have been
PREVIOUSLY created with DOS.
6-6 HISTORY OF VERSION 1.00
Survey files have a common base name. Different extensions are
used for the related files. The following filename extensions
were used in versions 1.00 TO 1.09.
Filename.SUR Survey Questions
Filename.RAW Raw Response Information
Filename.DAT Summary Analysis Data
6-7 HISTORY OF VERSION 1.10
These versions added support for the Type E questions, and reduced
the size of the Raw Response file. For example, one response file
was reduced from 87000 characters to 3306 characters. This
response file format is still used in the current version.
The following filename extensions were used in versions 1.10 TO 1.19.
Filename.STJ Survey Questions
Filename.RTJ Raw Response Information
Filename.DTJ Summary Analysis Data
6-8 HISTORY OF VERSION 1.20
Version 1.20 and later combined the SURVEY POWER questions with the
summary data files, helping eliminate file clutter and making this
data immediately accessible for viewing. Support was added for
creating ASCII and Lotus .WKS files. Support was also added for
changing screen colors.
The following filename extensions are used in these versions:
Filename.SVP Survey Questions and Survey Analysis Data
Filename.RTJ Raw Response Information (same as ver. 1.10)
Filename.WKS Lotus .WKS file able to be read by spreadsheets
Filename.ASC ASCII file readable by most word processors
6-9 SPECIALIZED NEEDS
If you have specialized needs, this program can be modified.
Please contact WISCO Computing at the mail address or BBS phone
number listed on the front page of this documentation for rates.
Computer Programs from:
WISCO COMPUTING, P. O. Box 8
Wisconsin Rapids, WI 54495-0008
(715) 423-8189
Quantity Product Unit Price
_____ GRADEBOOK POWER IBM 512K Indiv. License $59.00
_____ GRADING SKILLS POWER IBM 512K Indiv. License $59.00
_____ CROSSWORD POWER IBM 512K Indiv. License $39.95
_____ VOCABULARY POWER IBM 512K Indiv. License $39.95
_____ SURVEY POWER IBM 512K Indiv. License $39.95
-------------------------------
A Site License is available for all products at 3 times the
cost of an Individual License. A Site License allows all
employees performing their duties for the Site to legally
use the program.
_____ _____________________________ Site License __________
--------------------------------
_____ Extra GRADEBOOK POWER MANUALS/Site License $2.00 ea.
_____ Extra GRADING SKILLS POWER MAN./Site License $2.00 ea.
_____ Extra CROSSWORD POWER MANUALS/Site License .50 ea.
_____ Extra VOCABULARY POWER MANUALS/Site License .50 ea.
_____ Extra SURVEY POWER MANUALS/Site License $2.00 ea.
------------------------------- ----------
SUB TOTAL __________
WISCONSIN SALES TAX 5% __________
TOTAL SHIPPING $2.00
----------
TOTAL ORDER __________
FOREIGN CUSTOMERS - PAYMENT MUST BE IN US DOLLARS
---------------------------------------------------------------
Form ASP-WIS
Please ship the latest version of these programs to:
Registered Owner________________________________________________
Street Address__________________________________________________
City___________________________ State______ Zip Code___________
IBM Disk Size Needed - (either 3 1/2" or 5 1/4") __________
Circle Method of Payment CHECK Money Order VISA MasterCard
Name on Credit Card_____________________________________________
Card No.____________________________________ Exp. Date _________
Where did you learn about our programs?_________________________