home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
418
/
FAXDOC.ZIP
/
1012503.TXT
< prev
next >
Wrap
Text File
|
1993-05-11
|
2KB
|
50 lines
FYI
(Note: The origin of this information may be internal or external to Novell.
Novell makes every effort within its means to verify this information.
However, the information provided in this document is FOR YOUR INFORMATION
only. Novell makes no explicit or implied claims to the validity of this
information.)
TITLE: Setting LASTDRIVE
DOCUMENT ID#: FYI.P.6005
DATE: 01OCT92
PRODUCT: NetWare Lite
PRODUCT VERSION: All versions
SUPERSEDES: NA
LITE FAX DOC #: 2503
SYMPTOM
NA
ISSUE/PROBLEM
Setting LASTDRIVE
LASTDRIVE is a DOS command that is executed at boot time from the
CONFIG.SYS file. The NetWare Lite NET utility uses LASTDRIVE to identify
valid drives and provide compatibility with other NetWare products. The
installation programs default value of LASTDRIVE=M: should work for most
situations. If you wish to use a value other than M:, be aware that
LASTDRIVE should be set to G: or greater for NET to run. LASTDRIVE is
set by including a command such as "LASTDRIVE=G:" in CONFIG.SYS. If you
attempt to run NET with LASTDRIVE set lower than the G: drive or not set,
you will have to increase the value of LASTDRIVE and reboot before any
NET command can be executed.
When LASTDRIVE is set to the F: drive, network directories can be mapped
to any drive letter up to LASTDRIVE (except C: if SERVER is loaded).
However, the F: drive must be mapped to map D: or E: drive. If the
situation occurs where the D: or E: drive is mapped and the F: drive is
not mapped, the LASTDRIVE error message will result upon execution of the
next NET command. To avoid this problem set LASTDRIVE to the G: drive or
greater.
SOLUTION
NA