home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
230
/
DEERHU41.ZIP
/
INFO.TXT
< prev
next >
Wrap
Text File
|
1993-04-24
|
24KB
|
481 lines
_______
STRAT-TECH, INC. ____|__ | (R)
P.O. Box 1957 --| | |-------------------
Milwaukee, WI | ____|__ | Association of | | |_| Shareware
U.S.A. 53201 |__| o | Professionals
1-414-271-0980 -----| | |---------------------
|___|___| MEMBER
Thank you for your selection of the Deer Expert System!!
OUTDOOR LIFE magazine features the program in their
December, 1989 issue stating: "The Deer Expert System may
just be the planning tool you need to bridge the gap between
you and your whitetail." (Article by outdoor writer Bill Clede).
You use the program as a planning tool for obtaining the
most successful hunting method given certain hunting
conditions. This is very important since you want to make
the best use of a limited gun hunting season and your time as
well. The system is for whitetail deer only and covers the
type of hunting found in midwest and eastern United States,
and eastern Canada. It also applies to any area which has
similar woodland conditions in other areas of North America as
could exist in western U.S. and Canada. You easily view the
hunting methods and conditions in the library file 'METHODS.TXT'
so we do not list them here. For a quick start to the process
see the file 'readme' in the log section. The system boots
up to a menu and you follow the instructions as listed on
the screens.
The shareware program contains data for doe, smaller bucks,
and recovering wounded deer. When you register the program we send
you the latest version of the program marked as registered
and FREE additional databases for medium to large bucks.
You also get more log files and also more library files to
include in the library. As an added incentive to register
you may also get one or more of our other programs at half
price each. (see the orderfrm in the log section or call our toll
free number 1-800-783-9544 (available 24 hours a day). You may use
this toll free number for support as well. We also support the
program on the Compuserve "Outdoor Forum" which we scan
almost daily (General, hunting, fishing, and computer sections).
If you have not registered and/or paid yet, we expect you to
do so after trying the program for a two week trial period.
With each registration of $26, we send you the most
current version with any added files or hunting databases,
and the most recent hunting techniques and findings. You
may use the order form in the log "orderfrm" to register.
The system is based on recent research on deer behavior and
involves a literature search of recent writings in the
area. We found a consensus of opinions in these writings
and use the consensus as the basis for determining the data
base which includes possible hunting conditions and the best
methods for the conditions. The data base contains hundreds
of possibilities which the expert system links to
automatically. The expert system is a popular technology
used for relaying complex information in an area. Doctors
use expert systems to diagnose illnesses, and we apply the
expert system concept to deer hunting.
We use the "Prolog" programming language commonly used for
expert systems and artificial intelligence applications.
This fifth generation language allows a more compact program
and data base than other languages. It can take 10 times the
program code in a fourth generation language (dbase, C, etc.)
to do the same program in prolog. We thus give you much more
programming for your dollar.
The Deer Expert System covers many more situations than any
video or tape. We developed it to complement your favorite
articles, books, videos, and tapes. You use the system
as an excellent training tool for new hunters and children,
and the seasoned veteran learns from it as well. It helps
you have a safer hunt since you adequately prepare for
different conditions. It gives you a tremendous step forward
in deer hunting technique!
The program gives information mainly concerning gun deer
hunting, but you may generalize much of it to bow hunting
as well.
The expert system is in Section 2 Determine Method. You may
want to turn on NUM LOCK and use the numeric keypad for your
Yes/No responses in this section. Remember to toggle it
off (press NUM LOCK again) when finished with the section
to restore arrow key functions.
The Library section includes files which you only want to view
and changes are not allowed (you may print them). The Hunting
Logs section has files which you can modify, view, and print.
You print out a library file or log file as follows:
TO PRINT: move flashing cursor to top with arrow keys.
mark this point with keys Ctrl K B; move cursor to end with
arrow keys; mark end with Ctrl K K; and print with Ctrl K P.
PRESS THE 'Ctrl' WHILE YOU PRESS THE OTHER TWO KEYS IN ORDER.
Alternatively put the cursor where you wish to start printing,
press Ctrl K M, use the arrow keys to mark the block you wish to
print, finally press Alt F8 to print.
The program also includes a handy 'Hunting Logs' section.
This section allows you to keep track of and completely
plan your hunt. You can store information from year to
year - packing lists, equipment lists, scouting lists, recipes,
safety, etc.. Some logs you can just view on such topics
as hunter education, sighting, or hunting knives. You can fill
these logs with up to 64K of information. You also can print
the logs for sharing this information with other members of your
hunting camp. We especially recommend printing and sharing the
safety log with hunting camp members before each hunt. A
tremendous feature is the key word search; use the F3 search
key to find exactly what you want in the logs. Online help exists
when you press the 'Shift and F1' key within the logs. You may use
'Wordstar' compatible commands for many functions (see help).
You add your own files to the log directory by using the
F8 key. Press F8 from any log; press return with the light
bar on 'load file' and enter any file name and press return.
You must not enter a '.txt' or '.doc', just the 8 character
name followed by a period(.). For example, 'newlog.'.
Answer yes when asked 'File does not exist, Create y/n:'.
Put some information in it (You must enter something to
make it possible to save it). Press F10 and then return to save.
This creates a log which shows up in the log directory.
You also can change the headings for certain logs. Some
logs contain headings so that as you add more information
the text scrolls still allowing you to see headings. The
logs with headings are the Kill Record (Record), the
Scouting Log (Scoutin), the Address Log (Names), and
an "Extra" log for you to use.
You may have multiple logs in the same family e.g. record,
record1, record2, etc. or extra1, extra2, etc. and headings
come up for all of these files in the same family.
You use the procedure in the above paragraphs to create
appropriate heading logs as well; for example, to add "extra1"
use the log name 'extra1' when asked for a name after pressing
the F8 key (and enter).
Change the headings with the auxiliary log editor - F8 key.
F8 allows another file to be examined and changed in addition
to the log you are working on. Use the feature to change
headings for the logs mentioned above. The file name for
changing headings is "headcfg.dat". Use the Ctl-F10 key
to enlarge the window. More instructions are given when you
edit "headcfg.dat" using the F8 key from any log you edit
normally.
(The F8 key works after you have selected a log to work on
but you may edit any other file).
The logs always return to the last cursor position you were on
in the logs last. The information which allows this is stored
in the first five positions of the log, and this function
overwrites anything there originally. We show the number in
the upper left corner to remind you not to enter data in this
area. It is possible for your top line to get chopped; if this
happens just add some spaces after the cursor position number
and everything will work fine.
You must read the license information in the library before
running the program further.
The Deer Expert system includes the files: hunt.exe, hunt.hlp,
prolog.err, info, recipes, packing, notes, sources,
orderfrm, record, safety, equipmen, names, blank.log, scouting,
othrprod.txt, wounded.txt, educate.txt, knife.txt, outdoor.txt,
license.txt, sightin.txt, info.txt, safety.txt, methods.txt.
ticks.txt, hunt38.cfg, colorcfg.dat, headcfg.dat and hunt34.dba.
These files must all reside in the same directory or floppy
disk with only Deer Expert system files (except see below).
We add more files as we advance the program and the shareware
program does not have all the files because they would take
up too much room. The program, of course, is identical to
the registered version of the program.
Do not attempt to alter hunt38.cfg, colorcfg.dat, and hunt34.dba
or prolog.err since altering them even slightly causes the
system to malfunction. You must place these files in the same
directory as hunt.exe in order for the program to run. The file
headcfg.dat must also be in the same directory as hunt.exe, but
you may alter it as mentioned earlier.
Another feature, the print menu (activated by pressing Alt-P)
creates a file called prolog.log which contains screen output.
View the contents using the Auxiliary Log editor (F8). Press F8,
enter, then enter the name "Prolog.log". The log comes up and you
may review and edit it. Turn on "Text mode" to make the long
descriptive lines word wrap (see Miscellaneous help - and use
Ctl Q Ctl W) for better viewing. You also may wish to delete
unnecessary lines or add your own comments.
The Library section includes files which you only want to view,
and/or print; changes are not allowed. The Hunting Logs
section has files which you can modify, view, and print.
We may duplicate a few files, such as the safety log, in both
areas so that you can make your own notes about the topic and
so that you can print out the contents and share them with
your deer camp.
The Hunting Logs section contains online help when you press
'Shift' and 'F1' from within a log. The help shows you how
to print files, do key word searches, etc. You can also edit
an auxiliary file at the same time by pressing the F8 key.
This allows you to edit information in other files and save it
by using the F10 key. The F9 key allows you to bring in other
information from other files or just view other files while
you use one of your 'Deer Expert' logs. In the logs, you save
and exit the log by using the F10 key, and exit the log without
saving changes with the 'Esc' key.
INSTALLATION (See also the Readme file in the Log Section)
If you receive the Deer Expert system on a floppy disk, and you
have a hard disk, make a directory using the command:
'md c:\hunt' (no quotes). You can use any directory name,
but we recommend 'hunt' for compatibility with future versions.
Copy the files from each floppy disk in drive a: via the
command 'copy a:\*.* c:\hunt' (no quotes). The program diskette
contains all 'system' files and the log/library disk contains
the log/library files. (720k users receive all files on one
disk). Set the default drive in the General Section of the
program as appropriate. We recommend you put all files in the
same directory.
Be careful using the above copy command if you used a previous
version of "The Deer Expert" and created log information.
The above copy command copies all new log files and overlays
existing ones if they exist. In this case copy new log files
individually to your 'hunt' directory. For example, to copy the
recipe log from the original file to your 'hunt' directory use
the command 'copy a:\recipe c:\hunt'. Of course, only copy those
logs which you wish to establish new with no data in them.
You may use the mechanized backup procedure as specified in detail
in the 'Utility' log in the program (Application keys Alt-9 or
Alt-B when in a log). If you do not wish to use the this feature
the following tells you how to backup logs using the DOS commands.
Of course, you should back up all the programs initially and
then periodically to safeguard all your valuable information.
To make a copy of all files to a backup disk in drive a: from
a hard disk directory which only has Deer Expert files type:
'copy *.* a:\' (no quotes).
When the logs become too large you may have to backup using two
diskettes; or just keep the main programs (hunt.exe, all '.txt'
files, prolog.err, hunt.hlp, hunt34.dba, colorcfg.dat,
headcfg.dat, hunt38.cfg, and blank.log) on one diskette
since these files do not change, and copy the rest of the files to
a floppy disk periodically to backup your logs. The command to
just backup up log files from a hard disk to a floppy disk in
drive a: is 'copy *. a:\' (no quotes).
You reference a log or library file on other drives or paths
by setting a default path for logs and library files in the
General Section of the program. The main program files must reside
in the main system directory which you run the program from, and
normally keeping logs and library files there works fine. However,
you may wish to have or access files in other directories and/or
drives and the default drive set in the General menu provides
for this.
If you have a two drive floppy system:
It is best to have all the files in one directory on one
floppy disk or hard drive; however, the system runs easily
on two floppy drives as the following example shows.
You have the main files (hunt.exe, prolog.err, hunt34.dba,
hunt.hlp, colorcfg.dat, hunt38.cfg, headcfg.dat and blank.log)
on a disk in drive a:, and the rest of the files on a floppy disk
in drive b:. (log and library files). This is the way the
programs are shipped to you for 360K users so all you need
to do is put the program disk in drive a: and the log/library
disk in drive b:.
Set the default drive in the General Section 1 of the main menu
to b:\. After this subsequent log and library use accesses
drive b. You may have as many diskettes as you desire with
log or library information. Just insert the appropriate disk
in drive b: to work with them and leave the program disk
in drive a:.
You may desire to make added log disks when you need more room.
To install added log files on drive b: disks use the Dos copy
command to copy log/library files from the original log disk
in drive a: to a floppy disk in drive b: - 'copy a:\record. b:\'
(no quotes). To copy library files use the command
'copy a:\info.txt b:\' (no quotes). Substitute the file name
as appropriate.
To backup files in drive a: to a floppy disk in drive b: enter
'copy a:\*.* b:\' (no quotes). To only backup the log files
(or copy them) to a floppy disk in drive b: enter 'copy *. b:\'
(no quotes).
If you have one drive and do not have a Hard Drive or do not
care to use the hard drive:
If the drive you have is the newer 720K or larger drive you should
be able to run the system quite easily with one disk with all the
files on it. If your files get too large and you desire to
have more than one disk then follow the instruction below for
360K one drive users. You must set the default drive to the
drive you use for the system although it is the same as the
system drive.
If you have a 360K drive and use the logs you probably will
run out of room at some point. In this case you run the system
by creating and using added diskette(s) with your logs and
library files only. You copy the logs to the added diskette using
the DOS copy command when you need more room. For each diskette
you create you must also copy the file colorcfg.dat, headcfg.dat,
hunt.help, and prolog.err to the new diskette. They should only
take up about 30K of room so you have plenty of room for log
information. Also set the default drive to a: in the General
Section 1. Also you may wish to copy the added files blank.log
and extra. if you plan to add new logs of your own.
A second disk comes with the registered version of the program
and it contains the necessary files already set up on the added
logs and library diskette for 360K users. If you make added
files then you must copy the appropriate files as we discussed
above.
BAK FILES
Saving files accessed with the F8 key causes additional '.bak'
(backup) files to be created for these files. This 'bak' file
is a copy of the original file you accessed and takes up the
same amount of room as the original file accessed. The regular
file contains your changes as you entered and saved them. You
use the Dos erase command to erase the 'bak' files if desired:
'erase record.bak' erases the record backup and retains your
regular record file. Erase *.bak erase all bak files.
PROLOG.LOG
Using Alt-P and its log file function creates a file called
'prolog.log'. You might find it useful to store Section Two
output here and then review or edit it later using the F8
auxiliary log editor. You may edit this file in using the F8
key after bringing up any log. You must rename or copy prolog.log
if you with to save its data; when you toggle Alt P LOG file
off, the next time you toggle it on it overwrites what you
logged before. Use the F8 key from any log file and specify
the file name 'prolog.log'; press return to bring the file up;
edit it as desired; press F10 to save; change the file name in
the save box to a name of your choice (no extension if you wish
it to show up in the Log Directory window).
TO RUN THE PROGRAM:
To run the program enter "hunt". Enter the command at the
Dos prompt in the directory where you have the files (e.g. hunt).
You enter the command 'cd c:\hunt' (no quotes) to get into
the 'hunt' directory.
Menus guide you once you start the program. Select many menu
items by just pressing the menu number selection.
WINDOWS 3.1 OPERATION
The program works fine when you run it as an icon under
windows. A windows 'pif' is enclosed: go into the Program
Manager of windows, file menu, new, select program item.
In the description box enter 'The Deer Expert 4.1', in the
command line box enter 'c:\hunt\hunt.exe'. Choose the OK box.
Then just click on 'The Deer Expert' to run. The included
pif file presumes you install the program to 'c:\hunt'
directory'. You may change the icon if desired.
COLOR AND REVERSE VIDEO DISPLAYS:
The color display is set in the General Section. If you have
any trouble you may specify a screen display when you run the program:
The 'hunt c' command gives you another set of colors for color monitors.
The 'hunt r' command gives you reverse video for monochrome monitors.
Minimum System Requirements are:
IBM PC or compatible computer. 356K of RAM internal memory.
PC-DOS or MS-DOS operating system, Version 3.3 or later.
Color or Monochrome monitor. Dos Version greater than 3.3
is recommended.
You get an error 1001 if the program could not boot up because of
insufficient memory.
If system does not boot or system boots and section 2 does not run,
remove any TSR (terminate and stay resident) (memory resident
programs). Rerun the Deer Expert program. You may also reduce
the memory used by these TSR's (see their documentation) in order
to get the 256K necessary to boot up the Deer Expert with your
memory resident programs.
If the system still does not boot make sure you have the proper
cfg files (colrcfg.dat, hunt38.cfg, headcfg.dat, and hunt34.dba
in the same directory as hunt.exe. Also try running the program
with one of the command line options above ('c' or 'r' as appropri-
ate)(no quotes and small letters e.g. hunt r). When the system
comes up reset the colors and path which may have become corrupt.
Also if you set an incorrect path in the General Section Default
Path selection, then you get errors in Sections 3 and 4 as the
program searches for files in the incorrect path you set.
Simply reset the correct default path in the General Section Default
procedure. Error number 7003 'Bad Path' comes up in Sections 3 and
4 until you set the path correctly.
CHANGES IN VERSION 4.0 OVER 3.4:
Hunting methods data base in section 2 almost twice as large.
We updated many of the patterns for the latest information
and added more conditions and information.
Adds many more log functions
Use of 8 Application Function Keys in logs including
unique Pattern Creator for creating your own patterns.
Adds more help information
Adds a default directory for logs on other drives/paths
Adds user color selection
Faster execution
Logs scroll under headings
Changeable headings
Adds Status lines at bottom of screens for easier use
Adds Alt-P Pop up Print Selection and Log file
Adds Path name in directory; file mask change allowed in Library
Logs prompt when data entered but not saved
Directory change allowed in library at ..\ selection
Some new log and library files added
Adds return position to logs
Now comes on two 360K diskettes
Easier menu flow in directories and expert system
--------------
Good Hunting !!!!
Chester Ceille, President, STRAT-TECH, Inc.
Please feel free to contact me with any questions or comments:
Chester Ceille at address above or Compuserve EMAIL: 72317,2332
-------------
We dedicate this program to Mr. Dale Henderson, Sr. who has
run our yearly deer hunting camp for over 20 years. We also
thank the other hunting camp members we hunted with over
the years: Mickey LoDuca, Dr. John Eichholz, Dale Henderson Jr.,
Carl and John Amport, and Scott Rodgers.
--------------
The software is intended for use only as a tool and
not as a professional adviser. Neither STRAT-TECH nor
anyone else involved in the creation, production or
distribution of the software warrants, guarantees, or makes
any representations regarding the use of the software in
terms of correctness, accuracy, reliability, currency, or
otherwise, and you rely on the software and results solely
at your own risk.
Neither STRAT-TECH nor anyone else who has been
involved in the creation, production, or distribution of
this software shall be liable for any direct, indirect,
consequential, or incidental damages arising out of the
use, the results of use, or inability to use the software
even if STRAT-TECH or any such other party has been advised
of the possibility of such damages.