home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
201
/
IO1093.ZIP
/
TECH05.TXT
< prev
next >
Wrap
Text File
|
1993-09-30
|
5KB
|
94 lines
HOW TO UPGRADE YOUR 386 OR 486 PROCESSOR CHIP
Submitted by: Gloria Short
One way to pull your increasingly old-fashioned computer back
into the forefront of technology is to upgrade its central
processing unit (CPU) by swapping out your existing 386 or slow
486 chip for a hot new 486 screamer. (Pentium chip upgrades are
still in the future.)
Unfortunately, not all computers are candidates for a chip swap.
Many popular mid-tier brand companies built their machines in a
non-standard way, making upgrading impossible except perhaps with
their own proprietary equipment. Examples include Leading Edge,
Packard Bell, Hyundai, and Epson. Those who bought more generic
clones will have an easier time upgrading their CPUs.
WHO CAN UPGRADE? You can upgrade even an old 286 chip to a 486,
but it won't help much because the bus and the rest of the
computer's components will slow everything down too much. A full
motherboard upgrade is often the better choice for a 286, because
it replaces many of the bottle-necked components.
With any computer, you'll want to consider the age of the
computer before deciding to upgrade it. Older computers may be
like my first car, a four-year-old Mercury that was in pretty
good shape. After a year, things began to fail. First, I had to
replace the starter solenoid. Then came radiator problems, a ring
job, alternator replacement, and so forth. After a couple years,
I'd replaced almost everything under the hood. When the starter
solenoid went out again, I knew it was time to get rid of the
car. If your computer is aging, replacing the CPU may not be cost
effective if the other components are due to wear out soon.
Any 386SX or 386 computer that's built to industry standards is a
likely upgrade candidate. Finding out if it can be upgraded can
be a ticklish task, though, because the upgrade vendor can't be
expected to know the exact configuration of all of the thousands
of clones built over the years. You'll need to consult with the
upgrade vendor and perhaps the computer manufacturer to get all
the information needed to determine if an upgrade will work. Some
older units may require a BIOS upgrade along with the chip swap.
If you have a 486SX or 486DX that runs at 16, 25, or 33 MHz,
you're in luck. They're virtually all upgradable through Intel's
OverDrive technology. Many have a separate socket built into the
motherboard just for the purpose of inserting a clock-doubling
486 chip. It replaces the original CPU by completely disabling it
and taking over its functions. In computers without the extra
socket, you simply replace the original CPU chip.
WHAT'S THE BENEFIT? If you're wondering why someone with a 33 MHz
486DX would want to upgrade his or her system, consider that
putting in an OverDrive chip would increase the speed from 33 MHz
to 66 MHz. That's twice as fast, isn't it?
The answer to that question is yes--and no. Yes, some functions
will be exactly twice as fast. No, some functions won't change at
all. The exact amount of performance gain for any given task will
vary, depending on which of your computer's resources are used to
accomplish the task.
Changing a 33 to an overdriven 66 doubles the speed of functions
within the CPU, but the system continues to communicate with all
the other components at the original 33-MHz speed. Thus
CPU-intensive tasks such as calculation, record sorting, and word
searches take place at twice the speed. But when the task
involves getting data from the disk, rewriting the screen, or
other non-CPU functions, there's little difference. Since almost
all tasks involve both kinds of operations, the overall speed
increase will be less than double, but still quite noticeable.
Replacing a 486SX with a 486DX OverDrive chip adds a math
coprocessor to the system. This speeds up floating-point math
operations, which are calculation-intensive tasks such as the
mathematical operations in spreadsheets and the vector graphics
calculations in CAD programs.
Converting a 386 computer to a 486 gives additional speed over
the mere clock speed because the 486 thinks faster. In this
rarified atmosphere, everything makes a speed difference. An
Intel 486DX chip has an 8K internal cache, for instance. This
cache buffers data that the CPU would normally obtain from the
system's RAM memory. If the CPU can read and write data through
the cache rather than the external RAM, it's faster. Yes, even
the speed difference between the CPU and external RAM is
significant. In a clock-doubled system, the internal cache
operation becomes even more significant.
A 486DX chip includes a built-in math coprocessor, but a 486SX
doesn't. (Actually, it does, but it's masked off and doesn't
function. Intel took a lot of heat for intentionally disabling
part of the CPU chip, then selling it for less.