home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
165
/
HD_UTIL.ZIP
/
HD_U.ZIP
/
AMS_PFU4.HLP
< prev
next >
Wrap
Text File
|
1991-09-16
|
14KB
|
342 lines
340
1, " SEND PRINTER CODES HELP"
1, " "
1, " This program simply sends printer control codes to a printer. "
1, " To use it simply type the codes (in decimal) wit a space between each:"
1, " "
1, " c1 c2 c3 ... c9"
1, " "
1, " As many codes can be sent as needed - up to the DOS command line limit."
1, " If you need to send more code than can fit on one DOS command line just"
1, " call this section again and send more codes."
1, " "
1, " Epson Codes: 27 52 - sets, 27 53 - clears italics"
1, " "
1, " 15 - set compressed, 18 - clear compressed"
1, " 14 - set Large print 20 - clear Large print"
1, " "
1, " 27 45(-) - set/clear underline"
1, " "
1, " 27 69(E) - set 27 70(F) - clear emphasized"
1, " 27 71(G) - set 27 72(H) - clear Double - strike"
1, " "
2, " PRINT A TEXT FILE HELP"
2, " "
2, " This program will print any ASCII text file. A date, time, & page header"
2, " are also printed on each page, unless specifically turned off."
2, " "
2, " To print an address and return address on an envelope see the /a and /r"
2, " switches."
2, " "
2, " Switches: /af - Prints an Address on an envelope, f - form feed (optional)"
2, " /b - Begin printing on a page other than page 1."
2, " /c# - # of lines to print per page."
2, " /cnt - COUNT the pages and #lines on last page, NO printing!"
2, " /cpy## - Print ## copies of this file."
2, " /h - High bit anded out & 0x7F"
2, " /l - Low codes replaced with SPACE - char(32). (V 5.0)"
2, " /lr,#,# - up to 20 #'s allowed: print to #, skip to # - pairs."
2, " /m# - More 132-chars per line, or designate the number (#)."
2, " /n - Number each line."
2, " /nff - No last FormFeed sent."
2, " /nss - No starting spaces."
2, " /o - Turns the header printing Off. No header printed."
2, " /p - Numbers the pages on the bottom of the page."
2, " /r - Prints a Return address on an envelope"
2, " (more = spacebar) (more = spacebar)"
2, " PRINT A TEXT FILE HELP"
2, " continued..."
2, " "
2, " More switches: "
2, " "
2, " /scn - Place the title lines on the screen to help positioning."
2, " /t - Prints tabs as is, not replaced by 3 spaces each."
2, " /tls## - Keep the ## lines as title lines & print on each page."
2, " /w - wait - pause after each page, for a key press."
3, " ADDRESS LABEL PRINTER"
3, " "
3, " FORM: filename.ext [c1 c2 c3] [switches]"
3, " "
3, " filename.ext: the name of the file to print"
3, " c1 c2 c3 etc: Printer codes to send to printer"
3, " switches: Any or all wanted different from defaults."
3, " "
3, " Defaults"
3, " switches: /b## - Label number to Begin printing with. 1"
3, " /c## - Number of Columns/Characters per line. 30"
3, " /e## - Label number to End printing with. Last"
3, " /l# - Number of lines between label beginnings. 6"
3, " /W#1.#2.#3.#4.#5 - WIDE printout of labels"
3, " "
3, " WIDE SWITCH: (Default value) (MAX)"
3, " #1 = Number of lines per label 4 10"
3, " #2 = Number of lines between labels 2 X"
3, " #3 = Number of labels across 2 10"
3, " #4 = Number of characters per address line 30 50"
3, " #5 = Number of characters between labels 5 X"
3, " X = max is 32,727, way beyond any normal useage."
3, " "
3, " (more = spacebar) (EXAMPLES) (more = spacebar)"
3, " ADDRESS LABEL PRINTER"
3, " continued..."
3, " "
3, " Example 1: lst 29"
3, " Example 2: lst 29 /b12 /e34 "
3, " Example 3: lst 15 /b12 /e34 /w5.1.4.30.2
3, " "
3, " Example 1: will print out the entire 'lst' file on labels on an"
3, " OKIDATA 82a printer in its small print mode."
3, " "
3, " Example 2: same as #1 for labels 12 through 34 only."
3, " "
3, " Example 3: will print out four labels across a page, of up to five"
3, " lines per label, one line between labels, 30 characters"
3, " per label line, two characters between labels. Start"
3, " with label #12, end with label #34 and use compressed"
3, " print on an EPSON printer (15)."
4, " MOVE PRINTER PAPER HELP"
4, " "
4, " "
4, " "
4, " This program will help Clear the Printer. To use it type either:"
4, " "
4, " FORM: (RETURN) or ## (RETURN)"
4, " "
4, " where ## is any number from 1 to whatever you want."
4, " "
4, " "
4, " (RETURN): will send a Form Feed to the printer. This moves the paper"
4, " to the ''top'' of the next page, or form."
4, " "
4, " "
4, " ## (RETURN): will send ## lines feeds to the printer. This moves the"
4, " paper up by the ## of lines specified."
4, " "
5, " DISPLAY TEXT HELP"
5, " "
5, " This program will display an ASCII text file. Enter the text file name & "
5, " any switches.""
5, " "
5, " FORM: drive:\path\file-name [[/c#.#]] [[/switches]]"
5, ""
5, " Switches:"
5, " /a# -- Protect lines above this line number (lock titles.)"
5, " /b#.#- Banner (#.# = colors, optional), if /a# used FIRST."
5, " /c#.#- Color, fore.back-ground colors , or . allowed."
5, " /f[text] - display file & auto FIND this "text"."
5, " /l## - Protect columns to the left of the column."
5, " /nlr - No Left/Right movement"
5, " /r## - Only active if /l## used: The is the RIGHT column to"
5, " START at in the right-hand-left/right movement window."
5, ""
5, " This program now allows lines up to 256 characters in length, lines"
5, " longer than 256 characters are wrapped. 80 columns will be shown at"
5, " one time. Use of the Left/Right arrows moves the text right or"
5, " left. Pressing the SPACE-BAR will activate a second HELP line"
5, " for left/right movement."
5, " "
5, " Search inputs are limited to 70 characters."
6, " SMALL EDITOR TYPEWRITER HELP"
6, " "
6, " FORM: drive:\path\file-name [[switches]]"
6, " "
6, " STARTING SWITCHES"
6, " "
6, " /a - Use 601 lines by 87 Characters for the AMS.HLP type files."
6, " NOTE: The AMS.HLP files are the full screen help files."
6, " /as - Auto Save the file AS named. If Alt-S pressed no opertunuty is given"
6, " to change the file name."
6, " /c#.# - Colors for text screen foreground.background, NOTE: This will"
6, " ONLY work on IBM color standard type COLOR monitors & driver cards."
6, " /l - Use LONG LINES (102 lines by 480 characters), for AMS.LST files."
6, " AMS.LST files are the Advanced Menu System MENU files."
6, " /s - Short lines for SAM.HLP files, NOTE: The SAM.HLP files are"
6, " the Small help window help files, 11 lines X 48 characters."
6, " /t# - Relpace TAB with spaces. Enter the # of spaces wanted for each tab."
6, " /ty - Start in the Typewriter mode. Each line entered with the ─┘,"
6, " ENTER or RETURN key, will be sent to the printer."
6, " "
6, " F1 - More detailed help for the Editor (typewriter) program when running."
6, " F2 - changes the bottom two lines of help between the two help lines."
6, " (COLORS)"
6, " (MORE = spacebar) (MORE = spacebar)"
6, " SMALL EDITOR TYPEWRITER HELP"
6, " continued..."
6, " "
6, " "
6, " FORM: drive:\path\file-name [[switches]]"
6, " "
6, " /c#.# - Colors for text screen foreground.background, NOTE: This will"
6, " ONLY work on IBM color standard type COLOR monitors & driver cards."
6, " "
6, " "
6, " COLORS"
6, " "
6, " COLORS: 0 Black 8 Black Foreground = 0 - 15"
6, " 1 Blue 9 Bright Blue Background = 0 - 7"
6, " 2 Green 10 Bright Green"
6, " 3 Light Blue 11 Bright Light Blue"
6, " 4 Red 12 Bright Red"
6, " 5 Magenta 13 Bright Magenta"
6, " 6 Brown 14 Bright Yellow"
6, " 7 Normal White 15 Bright White"
6, ""
6, ""
6, " For on-line help while in the editor, press the F1-key. "
7, " CHANGE TEXT FILES LETTERS TO DESIGNATED CASE HELP"
7, ""
7, " This program changes a files text from either upper case to lower case or a "
7, " files lower case letters to upper case. CASE will default to changing "
7, " everything to lower case. It will also COUNT the letters of a designated
7, " case."
7, ""
7, " FORM: drive:\path\file-name [switch]"
7, ""
7, ""
7, " SWITCHES: /l - Change all upper case letters in file to lower case."
7, " /u - Change all lower case letters in file to UPPER case."
7, " /c? - Count the number of ?-case letters. (?=U/L)."
7, ""
7, " NOTE: The default is change from upper case to lower case."
7, ""
7, ""
7, " EXAMPLE: test.fl /cu - will count the upper case letters in 'TEST.FL'."
7, ""
8, ""
8, " HP LASER Jet III font CODES"
8, ""
8, ""
8, " cram: set it to 75 lines by 200 characters. use PPRINT /c75 /m200 /hp"
8, ""
8, " I028 - very small PC 120 chars"
8, ""
8, " I029 - small PC 90 chars"
8, " I030 - small bold PC"
8, " I031 - small italic PC"
8, ""
8, " I032 - Normal PC 80 chars"
8, " I033 - Normal Bold 80 chars"
8, " I034 - Normal Italic 80 chars"
8, ""
8, " wrap off: Turns automatic line wrap off."
8, " wrap on: Turns automatic line wrap on."
8, ""
8, ""
8, " port: &l0O"
8, " rport: &l2O"
8, " portrait: &l0O"
8, " reverse-portrait: &l2O"
8, " cr-lf: &k2G"
8, " wrap-off: &s1C"
8, " wrap-on: &s0C"
8, " (Roman-8)"
8, " i000: (8U(s0p10.00h12.0v0s0b3T"
8, " i001: (8U(s0p16.67h8.5v0s0b0T"
8, " i002: (8U(s0p12.00h10.0v0s0b3T"
8, " i003: (8U(s0p12.00h10.0v0s3b3T"
8, " i004: (8U(s0p12.00h10.0v1s0b3T"
8, " i005: (8U(s0p10.00h12.0v0s3b3T"
8, " i006: (8U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i007 - i009 are for landscape mode)"
8, " (i010 - i017 are scale-able fonts)"
8, " (use form: (8U(s1p__v0s0b410T, where __ are the size numbers)"
8, " "
8, " (ECMA-94)"
8, " i018: (0N(s0p16.67h8.5v0s0b0T"
8, " i019: (0N(s0p12.00h10.0v0s0b3T"
8, " i020: (0N(s0p12.00h10.0v0s3b3T"
8, " i021: (0N(s0p12.00h10.0v1s0b3T"
8, " i022: (0N(s0p10.00h12.0v0s0b3T"
8, " i023: (0N(s0p10.00h12.0v0s3b3T"
8, " i024: (0N(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i025 - i027 are for landscape mode)"
8, " "
8, " (PC-8)"
8, " PC very small"
8, " i028: (10U(s0p16.67h8.5v0s0b0T"
8, " PC small"
8, " i029: (10U(s0p12.00h10.0v0s0b3T"
8, " PC small bold"
8, " i030: (10U(s0p12.00h10.0v0s3b3T"
8, " PC small italic"
8, " i031: (10U(s0p12.00h10.0v1s0b3T"
8, " PC normal"
8, " i032: (10U(s0p10.00h12.0v0s0b3T"
8, " PC normal bold"
8, " i033: (10U(s0p10.00h12.0v0s3b3T"
8, " PC normal italic"
8, " i034: (10U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i035 - i037 are for landscape mode)"
8, " "
8, " (PC-8 DN)"
8, " i038: (11U(s0p16.67h8.5v0s0b0T"
8, " i039: (11U(s0p12.00h10.0v0s0b3T"
8, " i040: (11U(s0p12.00h10.0v0s3b3T"
8, " i041: (11U(s0p12.00h10.0v1s0b3T"
8, " i042: (11U(s0p10.00h12.0v0s0b3T"
8, " i043: (11U(s0p10.00h12.0v0s3b3T"
8, " i044: (11U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i045 - i047 are for landscape mode)"
8, " "
8, " (PC-850)"
8, " i048: (12U(s0p16.67h8.5v0s0b0T"
8, " i049: (12U(s0p12.00h10.0v0s0b3T"
8, " i050: (12U(s0p12.00h10.0v0s3b3T"
8, " i051: (12U(s0p12.00h10.0v1s0b3T"
8, " i052: (12U(s0p10.00h12.0v0s0b3T"
8, " i053: (12U(s0p10.00h12.0v0s3b3T"
8, " i054: (12U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i055 - i057 are for landscape mode)"
8, " "
8, " (LEGAL)"
8, " i058: (1U(s0p16.67h8.5v0s0b0T"
8, " i059: (1U(s0p12.00h10.0v0s0b3T"
8, " i060: (1U(s0p12.00h10.0v0s3b3T"
8, " i061: (1U(s0p12.00h10.0v1s0b3T"
8, " i062: (1U(s0p10.00h12.0v0s0b3T"
8, " i063: (1U(s0p10.00h12.0v0s3b3T"
8, " i064: (1U(s0p10.00h12.0v1s0b3T"
8, " "
8, " (i065 - i067 are for landscape mode)"
8, " "
8, " "
8, " landscape: &l1O"
8, " reverse-landscape: &l3O"
8, " land: &l1O"
8, " rland: &l3O"
8, " "
8, " (Roman-8)"
8, " i007: (8U(s0p16.67h8.5v0s0b0T"
8, " i008: (8U(s0p10.00h12.0v0s0b3T"
8, " i009: (8U(s0p10.00h12.0v0s3b3T"
8, " "
8, " (ECMA-94)"
8, " i025: (0N(s0p16.67h8.5v0s0b0T"
8, " i026: (0N(s0p10.00h12.0v0s0b3T"
8, " i027: (0N(s0p10.00h12.0v0s3b3T"
8, " "
8, " (PC-8)"
8, " i035: (10U(s0p16.67h8.5v0s0b0T"
8, " i036: (10U(s0p10.00h12.0v0s0b3T"
8, " i037: (10U(s0p10.00h12.0v0s3b3T"
8, " "
8, " (PC-8 DN)"
8, " i045: (11U(s0p16.67h8.5v0s0b0T"
8, " i046: (11U(s0p10.00h12.0v0s0b3T"
8, " i047: (11U(s0p10.00h12.0v0s3b3T"
8, " "
8, " (PC-850)"
8, " i055: (12U(s0p16.67h8.5v0s0b0T"
8, " i056: (12U(s0p10.00h12.0v0s0b3T"
8, " i057: (12U(s0p10.00h12.0v0s3b3T"
8, " "
8, " (LEGAL)"
8, " i065: (1U(s0p16.67h8.5v0s0b0T"
8, " i066: (1U(s0p10.00h12.0v0s0b3T"
8, " i067: (1U(s0p10.00h12.0v0s3b3T"