home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
126
/
MORTON.ZIP
/
ZAPCODE.EXE
/
SRNX1000.PMF
< prev
next >
Wrap
Text File
|
1991-05-01
|
15KB
|
463 lines
;---------------------------------------;
; ZAPCODE Printer Make File (PMF) ;
; for the Star NX-1000 printer. ;
; ;
; (C) Copyright 1990 Robert L. Morton ;
; All Rights Reserved ;
;---------------------------------------;
PRINTER = "Star NX-1000: Emulation Both"
RESET = 27,64
NAME = "Line Feed"
DESC = "Advance paper to the next line."
CODES = 10
NAME = "Reverse Line Feed"
DESC = "Prints the current line and feeds"
"the paper in the reverse direction"
"to the preceding line. Ignored when"
"friction feed is used."
CODES = 27,10
NAME = "Form Feed"
DESC = "Advance paper to the top of the"
"next page."
CODES = 12
NAME = "Reverse Form Feed"
DESC = "Feeds the paper backward to the"
"top of the current page. Ignored"
"when friction feed is used."
CODES = 27,12
NAME = "Sound Bell"
DESC = "Sounds a brief beep tone from the"
"printer's beeper."
CODES = 7
NAME = "Select Draft Quality Characters"
DESC = "Changes from near letter quality to"
"draft quality. Ignored if the NLQ"
"Type Style switch was pressed"
"during power-up."
CODES = 27,120,48
NAME = "Select NLQ Characters"
DESC = "Changes from draft quality to near"
"letter quality. Ignored if the NLQ"
"Type Style switch was pressed"
"during power-up."
CODES = 27,120,49
NAME = "Select NLQ Type Style"
DESC = "If currently in draft mode, this"
"command does not take effect until"
"NLQ characters are selected."
"Ignored if the NLQ Type Style"
"switch was pressed during power-up."
CODES = 27,107,0
"Please select NLQ type style by"
"entering one of the following"
"decimal values:"
" "
"Value Type Style"
"----- -----------"
" 0 Courier (default)"
" 1 Sanserif"
" 2 Orator with small capitals"
" 3 Orator with lower case"
" "
"Example: Entering 1 selects the"
"Sanserif type style."
0
NAME = "Italics ON"
DESC = "Causes subsequent characters to be"
"printed in italics. Ignored if the"
"NLQ Type Style switch was pressed"
"during power-up."
CODES = 40,40,73,41,41,49
NAME = "Italics OFF"
DESC = "Stops italic printing and causes"
"subsequent characters to be printed"
"upright. Ignored if the NLQ Type"
"Style switch was pressed during"
"power-up."
CODES = 40,40,73,41,41,48
NAME = "Emphasized ON"
DESC = "Causes subsequent draft characters"
"to be emphasized by adding extra"
"thickness to vertical strokes."
CODES = 27,69
NAME = "Emphasized OFF"
DESC = "Cancels emphasized printing."
CODES = 27,70
NAME = "Double-Strike ON"
DESC = "Causes subsequent characters to be"
"printed twice with a slight"
"vertical paper motion in between,"
"causing a thickening of horizontal"
"strokes."
CODES = 27,71
NAME = "Double-Strike OFF"
DESC = "Cancels double-strike printing."
CODES = 27,72
NAME = "Underline ON"
DESC = "Causes subsequent characters to be"
"underlined."
CODES = 27,45,49
NAME = "Underline OFF"
DESC = "Stops underlining."
CODES = 27,45,48
NAME = "Overline ON"
DESC = "Causes subsequent characters to be"
"overlined."
CODES = 27,95,49
NAME = "Overline OFF"
DESC = "Stops overlining."
CODES = 27,95,48
NAME = "Superscript ON"
DESC = "Causes subsequent characters to be"
"printed as superscripts. Does not"
"change the character pitch."
CODES = 27,83,48
NAME = "Subscript ON"
DESC = "Causes subsequent characters to be"
"printed as subscripts. Does not"
"change the character pitch."
CODES = 27,83,49
NAME = "Superscript/Subscript OFF"
DESC = "Stops printing superscripts or"
"subscripts and returns to normal"
"printing."
CODES = 27,84
NAME = "Select Print Color"
DESC = "Select the color to be used while"
"printing. Ignored if a color ribbon"
"is not installed."
CODES = 27,114,0
"Please select print color by"
"entering one of the following"
"decimal values."
" "
"Value Color"
"----- -------"
" 0 Black"
" 1 Red"
" 2 Blue"
" 3 Violet"
" 4 Yellow"
" 5 Orange"
" 6 Green"
" "
"Example: Entering 4 selects yellow."
0
NAME = "Slash Zero ON"
DESC = "Causes subsequent zero characters"
"to be overprinted with a slash."
CODES = 27,126,49
NAME = "Slash Zero OFF"
DESC = "Causes subsequent zero characters"
"to be printed normally, without"
"a slash."
CODES = 27,126,48
NAME = "Select Elite Pitch"
DESC = "Changes pitch to elite (12"
"characters per inch)."
CODES = 27,77
NAME = "Condensed ON"
DESC = "Selects condensed pica (17"
"characters per inch)."
CODES = 15
NAME = "Condensed OFF"
DESC = "Cancels condensed printing."
CODES = 18
NAME = "Expanded ON"
DESC = "Causes subsequent characters to be"
"expanded to double width."
CODES = 27,87,49
NAME = "Expanded OFF"
DESC = "Stops expanded printing and returns"
"to normal width."
CODES = 27,87,48
NAME = "Select Proportional Spacing"
DESC = "Causes subsequent characters to be"
"proportionally spaced. Ignored if"
"the Print Pitch switch was pressed"
"during power-up."
CODES = 27,112,49
NAME = "Select Fixed Spacing"
DESC = "Causes subsequent characters to be"
"printed with fixed character"
"spacing. Ignored if the Print Pitch"
"switch was pressed during power-up."
CODES = 27,112,48
NAME = "Select Double or Quadruple Size"
DESC = "(See your printer manual.)"
CODES = 27,104,0
"Please select size by entering one"
"of the following decimal values:"
" "
"Value Size"
"----- ----------------------------"
" 0 Normal size"
" 1 Double-high, double-wide"
" 2 Quad-high, quad-wide"
" 3 Dbl-high, dbl-wide lohalf"
" 4 Dbl-high, dbl-wide uphalf"
" 5 Quad-high, quad-wide lohalf"
" 6 Quad-high, quad-wide uphalf"
" "
"Example: Entering 1 selects double-"
"high, double-wide characters."
0
NAME = "Double-Height ON"
DESC = "Prints subsequent character at"
"double height without moving the"
"base line, and without changing the"
"line spacing."
CODES = 27,119,49
NAME = "Double-Height OFF"
DESC = "Terminates double-height printing"
"and prints subsequent characters at"
"normal height."
CODES = 27,119,48
NAME = "Select Character Size"
DESC = "Select a combination of character"
"height and width. Does not move the"
"base line."
CODES = 40,40,83,41,41,0
"Please select character size by"
"entering one of the following"
"decimal values:"
" "
"Value Width Height"
"----- ------ ------"
" 0 Single Single"
" 1 Double Single"
" 2 Single Double"
" 3 Double Double"
" "
"Example: Entering 2 selects single"
"width, double height characters."
0
NAME = "Set Line Spacing 1/8 Inch"
DESC = "Sets the distance the paper"
"advances or reverses in subsequent"
"line feeds to 1/8 inch."
CODES = 27,48
NAME = "Set Line Spacing 7/72 Inch"
DESC = "Sets the distance the paper"
"advances or reverses in subsequent"
"line feeds to 7/72 inch."
CODES = 27,49
NAME = "Set Line Spacing n/216 Inch"
DESC = "Sets the distance the paper"
"advances or reverses in subsequent"
"line feeds to n/216 inch."
CODES = 27,51,0
"Please enter for n:"
" "
"Range: 0 to 255 decimal."
" "
"Example: Entering 108 sets line"
"spacing to 108/216 inch, or half an"
"inch."
0
NAME = "Set Line Spacing n/72 Inch"
DESC = "Sets the distance the paper"
"advances or reverses in subsequent"
"line feeds to n/72 inch."
CODES = 27,65,0
"Please enter for n:"
" "
"Range: 0 to 85 decimal."
" "
"Example: Entering 15 sets line"
"spacing to 15/85 inch."
0
NAME = "Set Page Length In Lines"
DESC = "Sets the new page length in lines"
"at the current line spacing. The"
"current line becomes the top of"
"the page."
CODES = 27,67,0
"Please enter number of lines to set"
"the new page length at in decimal:"
" "
"Example: Entering 66 sets the new"
"page length at 66 lines."
0
NAME = "Set Page Length In Inches"
DESC = "Sets the new page length in inches."
"The current line becomes the top of"
"the page."
CODES = 27,67,0,0,0
"Please enter number of inches to"
"set the new page length in decimal:"
" "
"Example: Entering 11 sets new page"
"length to 11 inches."
0
NAME = "Set Left and Right Margins"
DESC = "Sets the left and right margins."
CODES = 27,88,0
"Please enter number of columns to"
"set the left margin at in decimal:"
" "
"Range: 0 to 255 decimal."
" "
"Example: Entering 10 sets the left"
"margin at 10 columns."
0,0
"Please enter number of columns to"
"set the right margin at in decimal:"
" "
"Example: Entering 70 sets the right"
"margin at 70 columns."
0
NAME = "Set Top Margin"
DESC = "Sets the top margin in lines."
CODES = 27,99,0
"Please enter number of lines -1 to"
"set the top margin at in decimal:"
" "
"Example: Entering 4 sets the top"
"margin at 3 lines."
0
NAME = "Set Bottom Margin"
DESC = "Sets the bottom margin in lines."
"The bottom margin is reset when you"
"change the page length."
CODES = 27,78,0
"Please enter number of lines to set"
"the bottom margin at in decimal:"
" "
"Example: Entering 3 sets the bottom"
"margin at 3 lines."
0
NAME = "Cancel Top and Bottom Margins"
DESC = "Cancels both the top and bottom"
"margins."
CODES = 27,79
NAME = "Paper-Out Detector ON"
DESC = "Causes the printer to stop printing"
"about an inch before the end of the"
"paper."
CODES = 27,57
NAME = "Paper-Out Detector OFF"
DESC = "Causes the printer to disregard the"
"signal sent by the paper-out"
"detector, enabling printing to the"
"bottom of the paper."
CODES = 27,56
NAME = "Left Justify Text ON"
DESC = "Aligns subsequent text with the"
"left margin, leaving the right"
"margin ragged."
CODES = 27,97,48
NAME = "Right Justify Text ON"
DESC = "Aligns subsequent text with the"
"right margin, leaving the left"
"margin ragged."
CODES = 27,97,50
NAME = "Center Text ON"
DESC = "Centers subsequent text between"
"the left and right margins."
CODES = 27,97,49
NAME = "Select Download Character Set"
DESC = "Selects the download character set."
CODES = 27,37,49
NAME = "Select ROM Character Set"
DESC = "Stops using the download character"
"set and returns to the built-in"
"ROM character set."
CODES = 27,37,48
NAME = "Immediate Print ON"
DESC = "Each character is printed as soon"
"as it is received. The paper is"
"then scrolled up about 2 inches so"
"that the current line can be seen."
CODES = 27,105,49
NAME = "Immediate Print OFF"
DESC = "Cancels the immediate print mode."
"The printer waits for each line to"
"be received before printing it and"
"does not scroll the paper."
CODES = 27,105,48
NAME = "Select Bidirectional Printing"
DESC = "Causes subsequent printing to be"
"done in the normal bidirectional"
"mode, which is faster than"
"unidirectional printing."
CODES = 27,85,48
NAME = "Select Unidirectional Printing"
DESC = "Causes subsequent printing to be"
"done unidirectionally, ensuring"
"maximum vertical alignment"
"precision."
CODES = 27,85,49
NAME = "Select Manual Feed"
DESC = "Selects manual sheet feeding even"
"when the optional automatic sheet"
"feeder is mounted."
CODES = 27,25,0,0
NAME = "Select Auto Feed"
DESC = "Selects automatic sheet feeder."
CODES = 27,25,4
NAME = "Eject Paper From ASF"
DESC = "Ejects the current page."
CODES = 27,25,82