home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
126
/
MORTON.ZIP
/
ZAPCODE.EXE
/
IBMGRAPH.PMF
< prev
next >
Wrap
Text File
|
1991-05-01
|
8KB
|
285 lines
;---------------------------------------;
; ZAPCODE Printer Make File (PMF) ;
; for the IBM Graphics Printer. ;
; ;
; (C) Copyright 1991 Robert L. Morton ;
; All Rights Reserved ;
;---------------------------------------;
PRINTER = "IBM Graphics Printer"
NAME = "Line Feed"
DESC = "Advance paper to the next line."
CODES = 10
NAME = "Form Feed"
DESC = "Advance paper to the top of the"
"next page."
CODES = 12
NAME = "Reverse Line Feed"
DESC = "Advance paper to the previous line."
"The paper will not advance beyond"
"the top of form position."
CODES = 27,93
NAME = "Sound Bell"
DESC = "Sound the printer bell."
CODES = 7
NAME = "Set Top Of Form"
DESC = "Sets the top of form to the current"
"position of the printhead."
CODES = 27,52
NAME = "Clear Printer Buffer"
DESC = "Clear all data from printer"
"buffer."
CODES = 24
NAME = "Select NLQ Print"
DESC = "Activate Near Letter Quality (NLQ)"
"printing. Characters printed in NLQ"
"are crisper and more like the"
"characters produced by a type-"
"writer."
CODES = 27,73,2
NAME = "Select Draft Quality Print"
DESC = "Activate Draft Quality printing."
"Use draft for printing drafts and"
"other documents that you want to"
"print quickly."
CODES = 27,73,1
NAME = "Select 10 CPI"
DESC = "Activate 10 characters per inch"
"(cpi) printing."
CODES = 18
NAME = "Select 12 CPI"
DESC = "Activate 12 characters per inch"
"(cpi) printing."
CODES = 27,58
NAME = "Double Width ON"
DESC = "Activate double width print."
"Characters are printed twice their"
"normal width."
CODES = 27,87,1
NAME = "Double Width OFF"
DESC = "Deactivate double width print."
"Characters are printed their normal"
"width."
CODES = 27,87,0,0
NAME = "Emphasized ON"
DESC = "Activate emphasized print."
"Characters are printed twice. The"
"second time, character is offset"
"horizontally."
CODES = 27,69
NAME = "Emphasized OFF"
DESC = "Deactivate emphasized print."
CODES = 27,70
NAME = "Enhanced ON"
DESC = "Activate enhanced print."
"Characters are printed twice. The"
"second time, character is offset"
"vertically."
CODES = 27,71
NAME = "Enhanced OFF"
DESC = "Deactivate enhanced print."
CODES = 27,72
NAME = "Compressed ON"
DESC = "Activate compressed print."
CODES = 15
NAME = "Compressed OFF"
DESC = "Deactivate compressed print."
CODES = 18
NAME = "Superscript ON"
DESC = "Activate superscript print."
"Characters are printed at an offset"
"above the normal print line."
CODES = 27,83,0,0
NAME = "Superscript OFF"
DESC = "Deactivate superscript print."
CODES = 27,84
NAME = "Subscript ON"
DESC = "Activate subscript print."
"Characters are printed at an offset"
"below the normal print line."
CODES = 27,83,1
NAME = "Subscript OFF"
DESC = "Deactivate subscript print."
CODES = 27,84
NAME = "Underline ON"
DESC = "Activate underline print."
"Characters, including the space,"
"are underscored."
CODES = 27,45,1
NAME = "Underline OFF"
DESC = "Deactivate underline print."
CODES = 27,45,0,0
NAME = "Proportional Spacing ON"
DESC = "Activate proportional spacing."
"Spacing between letters is adjusted"
"to compensate for the varying"
"widths of individual characters."
CODES = 27,80,1
NAME = "Proportional Spacing OFF"
DESC = "Deactivate proportional spacing."
CODES = 27,80,0,0
NAME = "Print Unidirectional"
DESC = "Print from left to right only."
CODES = 27,85,1
NAME = "Print Bidirectional"
DESC = "Print from both left to right and"
"right to left."
CODES = 27,85,0,0
NAME = "Automatic Linefeed ON"
DESC = "Activate automatic linefeed."
"Add a linefeed to each carriage"
"return received."
CODES = 27,53,1
NAME = "Automatic Linefeed OFF"
DESC = "Deactivate automatic linefeed."
CODES = 27,53,0,0
NAME = "Paper-Out Sensor ON"
DESC = "Activate paper-out sensor."
"Printer will alarm when paper is"
"out."
CODES = 27,57
NAME = "Paper-Out Sensor OFF"
DESC = "Deactivate paper-out sensor."
"Printer ignores paper-out condition"
"and continues printing."
CODES = 27,56
NAME = "Set Line Spacing 1/8"""
DESC = "Set line spacing to 1/8 of an inch."
CODES = 27,48
NAME = "Set Line Spacing 7/72"""
DESC = "Set line spacing to 7/72 of an"
"inch."
CODES = 27,49
NAME = "Set Line Spacing n/216"""
DESC = "Set line spacing in any increment"
"of 216ths of an inch."
CODES = 27,51,0
"Enter new line spacing in"
"increments of 216ths of an inch."
" "
"Range: 0 to 255 decimal."
" "
"Example: Entering 108 (decimal)"
"would set line spacing at 108/216""."
0
NAME = "Set Form Length In Inches"
DESC = "Set the current form length in"
"inches."
CODES = 27,67,0,0,0
"Enter number of inches to set the"
"current form length."
" "
"Range: 0 to 255 decimal."
" "
"Example: Entering 11 (decimal)"
"would set the current form length"
"to 11 inches."
0
NAME = "Set Form Length In Lines"
DESC = "Set the current form length in"
"lines."
CODES = 27,67,0
"Enter number of lines to set the"
"current form length."
" "
"Range: 0 to 255 decimal."
" "
"Example: Entering 68 (decimal)"
"would set the current form length"
"to 68 lines."
0
NAME = "Perforation Skip ON"
DESC = "Activate perforation skip. Printer"
"will skip a specified distance when"
"perforation is encountered."
CODES = 27,78,0
"Enter number of lines to skip when"
"perforation is encountered."
" "
"Range: 0 to 255 decimal."
" "
"Example: Entering 18 (decimal)"
"would cause printer to skip 18"
"lines when the perforation is"
"encountered."
0
NAME = "Perforation Skip OFF"
DESC = "Deactivate perforation skip."
CODES = 27,79
NAME = "Set Left Margin"
DESC = "Set the left margin."
CODES = 27,88,0
"Enter character column position in"
"which to set the left margin."
" "
"Range: 1 to 255 decimal."
" "
"Example: Entering 15 (decimal)"
"while printer is in 10 cpi, would"
"set the left margin at 1 1/2""."
0,0,0
NAME = "Set Right Margin"
DESC = "Set the right margin."
CODES = 27,88,0,0,0
"Enter character column position in"
"which to set the right margin."
" "
"Range: 1 to 255 decimal."
" "
"Example: Entering 80 (decimal)"
"while printer is in 10 cpi, would"
"set right margin at 8""."
0
NAME = "Select IBM Character Set I"
DESC = "Select the IBM character set I to"
"be used during printing."
CODES = 27,55
NAME = "Select IBM Character Set II"
DESC = "Select the IBM character set II to"
"be used during printing."
CODES = 27,54