home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
126
/
MORTON.ZIP
/
ZAPCODE.EXE
/
EPLQ850.PMF
< prev
next >
Wrap
Text File
|
1991-05-01
|
13KB
|
417 lines
;---------------------------------------;
; ZAPCODE Printer Make File (PMF) ;
; for the Epson LQ-850 printer. ;
; ;
; (C) Copyright 1990 Robert L. Morton ;
; All Rights Reserved ;
;---------------------------------------;
PRINTER = "Epson LQ-850"
RESET = 27,64
NAME = "Line Feed"
DESC = "Advance paper to the next line."
CODES = 10
NAME = "Form Feed"
DESC = "Advance paper to the top of the"
"next page."
CODES = 12
NAME = "Clear Printer Buffer"
DESC = "Clear all data from printer"
"buffer."
CODES = 24
NAME = "Sound Beeper"
DESC = "Sound the printer's beeper."
CODES = 7
NAME = "Cut Sheet Feeder: ON"
DESC = "This command should not be used"
"unless the automatic sheet feeder"
"is installed."
CODES = 27,25,4
NAME = "Cut Sheet Feeder: OFF"
DESC = "This command should not be used"
"unless the automatic sheet feeder"
"is installed."
CODES = 27,25,0,0
NAME = "Cut Sheet Feeder: Load From Bin 1"
DESC = "This command should not be used"
"unless the automatic sheet feeder"
"is installed."
CODES = 27,25,1
NAME = "Cut Sheet Feeder: Eject a Sheet"
DESC = "This command should not be used"
"unless the automatic sheet feeder"
"is installed."
CODES = 27,25,82
NAME = "Select NLQ Print"
DESC = "Activate Near Letter Quality (NLQ)"
"printing. Characters printed in NLQ"
"are crisper and more like the"
"characters produced by a type-"
"writer."
CODES = 27,120,1
NAME = "Select Draft Quality Print"
DESC = "Activate Draft Quality printing."
"Use draft for printing drafts and"
"other documents that you want to"
"print quickly."
CODES = 27,120,0,0
NAME = "Select Typestyle"
DESC = "Select a new typestyle."
CODES = 27,120,1,27,107,0
"Please select typestyle by entering"
"one of the following decimal"
"values:"
" "
"0 = Roman"
"1 = Sans Serif"
"2 = Courier *"
"3 = Prestige *"
"4 = Script *"
"5 = OCR-B *"
" "
"* Available only if the"
" corresponding font module is"
" installed."
" "
"Example: Entering 1 selects Sans"
"Serif typestyle."
0
NAME = "Select International Character Set"
DESC = "Select the international character"
"set to be used."
CODES = 27,82,0
"Please select character set by"
"entering one of the following"
"decimal values:"
" "
"0 = USA"
"1 = France"
"2 = Germany"
"3 = England"
"4 = Denmark I"
"5 = Sweden"
"6 = Italy"
"7 = Spain I"
"8 = Japan"
"9 = Norway"
"10 = Denmark II"
"11 = Spain II"
"12 = Latin America"
" "
"Example: Entering 2 selects the"
"German character set."
0
NAME = "Select 10 CPI"
DESC = "Activate 10 characters per inch"
"(cpi) printing."
CODES = 27,80
NAME = "Select 12 CPI"
DESC = "Activate 12 characters per inch"
"(cpi) printing."
CODES = 27,77
NAME = "Select 15 CPI"
DESC = "Activate 15 characters per inch"
"(cpi) printing."
CODES = 27,103
NAME = "Double Width ON"
DESC = "Activate double width print."
"Characters are printed twice their"
"normal width."
CODES = 27,87,1
NAME = "Double Width OFF"
DESC = "Deactivate double width print."
"Characters are printed their normal"
"width."
CODES = 27,87,0,0
NAME = "Double Height ON"
DESC = "Activate double height print."
"Characters are printed twice their"
"normal height."
CODES = 27,119,1
NAME = "Double Height OFF"
DESC = "Deactivate double height print."
"Characters are printed their normal"
"height."
CODES = 27,119,0,0
NAME = "Emphasized ON"
DESC = "Activate emphasized print."
"Characters are printed twice. The"
"second time, character is offset"
"horizontally."
CODES = 27,69
NAME = "Emphasized OFF"
DESC = "Deactivate emphasized print."
CODES = 27,70
NAME = "Double-Strike ON"
DESC = "Activate double-strike print."
"Characters are printed twice. The"
"second time, character is offset"
"vertically."
CODES = 27,71
NAME = "Double-Strike OFF"
DESC = "Deactivate double-strike print."
CODES = 27,72
NAME = "Condensed ON"
DESC = "Activate condensed print. If"
"pitch is 10 cpi, condensed will"
"produce 17.1 cpi. If pitch is 12"
"cpi, condensed will produce 20"
"cpi."
CODES = 15
NAME = "Condensed OFF"
DESC = "Deactivate condensed print."
CODES = 18
NAME = "Superscript ON"
DESC = "Activate superscript print."
"Characters are printed at an offset"
"above the normal print line."
CODES = 27,83,0,0
NAME = "Superscript OFF"
DESC = "Deactivate superscript print."
CODES = 27,84
NAME = "Subscript ON"
DESC = "Activate subscript print."
"Characters are printed at an offset"
"below the normal print line."
CODES = 27,83,1
NAME = "Subscript OFF"
DESC = "Deactivate subscript print."
CODES = 27,84
NAME = "Italics ON"
DESC = "Activate italics print. Characters"
"are slanted to the right."
CODES = 27,52
NAME = "Italics OFF"
DESC = "Deactivate italics print."
CODES = 27,53
NAME = "Underline ON"
DESC = "Activate underline print."
"Characters, including the space,"
"are underscored."
CODES = 27,45,1
NAME = "Underline OFF"
DESC = "Deactivate underline print."
CODES = 27,45,0,0
NAME = "Proportional Spacing ON"
DESC = "Activate proportional spacing."
"Spacing between letters is adjusted"
"to compensate for the varying"
"widths of individual characters."
CODES = 27,112,1
NAME = "Proportional Spacing OFF"
DESC = "Deactivate proportional spacing."
CODES = 27,112,0,0
NAME = "Print Unidirectional"
DESC = "Print from left to right only."
CODES = 27,85,1
NAME = "Print Bidirectional"
DESC = "Print from both left to right and"
"right to left."
CODES = 27,85,0,0
NAME = "Print Suppress Mode ON"
DESC = "Activate print suppress mode."
"Printer will ignore all data sent"
"to it."
CODES = 19
NAME = "Print Suppress Mode OFF"
DESC = "Deactivate print suppress mode."
CODES = 17
NAME = "Set Character Spacing"
DESC = "Set the amount of space to the"
"right of each character."
CODES = 27,32,0
"Enter number of dots per inch (dpi)"
"to space to the right of each"
"character."
" "
"Range: 0 to 127 decimal."
" "
"Example: Entering 25 (decimal)"
"would space 25 dpi to the right"
"of each character."
0
NAME = "Set Line Spacing 1/8"""
DESC = "Set line spacing to 1/8 of an inch."
CODES = 27,48
NAME = "Set Line Spacing 1/6"""
DESC = "Set line spacing to 1/6 of an inch."
CODES = 27,50
NAME = "Set Line Spacing n/180"""
DESC = "Set line spacing in any increment"
"of 180ths of an inch."
CODES = 27,51,0
"Enter new line spacing in"
"increments of 180ths of an inch."
" "
"Range: 0 to 255 decimal."
" "
"Example: Entering 90 (decimal)"
"would set line spacing at 90/180""."
0
NAME = "Set Line Spacing n/60"""
DESC = "Set line spacing in any increment"
"of 60ths of an inch."
CODES = 27,65,0
"Enter new line spacing in"
"increments of 60ths of an inch."
" "
"Range: 0 to 85 decimal."
" "
"Example: Entering 30 (decimal)"
"would set line spacing at 30/60""."
0
NAME = "Set Form Length In Inches"
DESC = "Set the current form length in"
"inches."
CODES = 27,67,0,0,0
"Enter number of inches to set the"
"current form length."
" "
"Range: 1 to 22 decimal."
" "
"Example: Entering 11 (decimal)"
"would set the current form length"
"to 11 inches."
0
NAME = "Set Form Length In Lines"
DESC = "Set the current form length in"
"lines."
CODES = 27,67,0
"Enter number of lines to set the"
"current form length."
" "
"Range: 1 to 127 decimal."
" "
"Example: Entering 68 (decimal)"
"would set the current form length"
"to 68 lines."
0
NAME = "Set Perforation Skip Distance"
DESC = "Set the distance the printer should"
"skip when the perforation is"
"encountered."
CODES = 27,78,0
"Enter number of lines to skip when"
"perforation is encountered."
" "
"Range: 1 to 127 decimal."
" "
"Example: Entering 18 (decimal)"
"would cause printer to skip 18"
"lines when perforation is"
"encountered."
0
NAME = "Cancel Skip Over Perforation"
DESC = "Cancel perforation skip operation."
CODES = 27,79
NAME = "Set Left Margin"
DESC = "Set the left margin."
CODES = 27,108,0
"Enter character column position in"
"which to set the left margin."
" "
"Range: 0 to 254 decimal."
" "
"Example: Entering 15 (decimal)"
"while printer is in 10 cpi, would"
"set the left margin at 1 1/2""."
0
NAME = "Set Right Margin"
DESC = "Set the right margin."
CODES = 27,81,0
"Enter character column position in"
"which to set the right margin."
" "
"Range: 1 to 255 decimal."
" "
"Example: Entering 80 (decimal)"
"while printer is in 10 cpi, would"
"set right margin at 8""."
0
NAME = "Set Justification"
DESC = "Set the type of text alignment to"
"be used."
CODES = 27,97,0
"Enter one of the following to"
"select type of justification:"
" "
"0 to justify left."
"1 to justify center."
"2 to justify right."
"3 to justify left & right."
" "
"The above values are in decimal."
" "
"Example: Entering 2 (decimal) would"
"set justification to the right."
0
NAME = "Set Horizontal Tabs"
DESC = "Set up to 32 horizontal tab stops."
CODES = 27,68,0
"Enter up to 32 tab stops in"
"ascending order in decimal:"
" "
"Range: 1 to 255 decimal."
" "
"Example: Entering 10,20,30,40 would"
"set four tab stops at locations 10,"
"20, 30, and 40 on the print line."
0,0,0
NAME = "Cancel Horizontal Tabs"
DESC = "Cancel all horizontal tab stops."
CODES = 27,68,0,0