home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Supreme Volume 6 #1
/
swsii.zip
/
swsii
/
099
/
PGP23SRC.ZIP
/
SRC
/
MPIIO.C
< prev
next >
Wrap
C/C++ Source or Header
|
1993-06-11
|
14KB
|
503 lines
/* mpiio.c - C source code for multiprecision integer I/O routines.
Implemented Nov 86 by Philip Zimmermann
Last revised 13 Sep 91 by PRZ
Boulder Software Engineering
3021 Eleventh Street
Boulder, CO 80304
(303) 541-0140
(c) Copyright 1986-92 by Philip Zimmermann. All rights reserved.
The author assumes no liability for damages resulting from the use
of this software, even if the damage results from defects in this
software. No warranty is expressed or implied.
These routines are for multiprecision arithmetic I/O functions for
number-theoretic cryptographic algorithms such as ElGamal,
Diffie-Hellman, Rabin, or factoring studies for large composite
numbers, as well as Rivest-Shamir-Adleman (RSA) public key
cryptography.
The external data representation for RSA messages and keys that
some of these library routines assume is outlined in a paper by
Philip Zimmermann, "A Proposed Standard Format for RSA Cryptosystems",
IEEE Computer, September 1986, Vol. 19 No. 9, pages 21-34.
Some revisions to this data format have occurred since the paper
was published.
*/
/* #define DEBUG */
#ifndef EMBEDDED /* not EMBEDDED - not compiling for embedded target */
#include <stdio.h> /* for printf, etc. */
#else /* EMBEDDED - compiling for embedded target */
#define NULL (VOID *)0
#endif
#include "mpilib.h"
#include "mpiio.h"
#include "pgp.h"
static void puthexbyte(byte b); /* Put out byte in ASCII hex via putchar. */
static
void puthexw16(word16 w); /* Put out 16-bit word in hex, high byte first. */
static
void putstr(string s); /* Put out null-terminated ASCII string via putchar. */
/*----------------- Following procedures relate to I/O ------------------*/
int string_length(char *s)
/* Returns string length, just like strlen() from <string.h> */
{ int i;
i = 0;
if (s != NULL)
while (*s++) i++;
return (i);
} /* string_length */
#ifdef DEBUG
static int ctox(int c)
/* Returns integer 0-15 if c is an ASCII hex digit, -1 otherwise. */
{ if ((c >= '0') && (c <= '9'))
return(c - '0');
if ((c >= 'a') && (c <= 'f'))
return((c - 'a') + 10);
if ((c >= 'A') && (c <= 'F'))
return((c - 'A') + 10);
return(-1); /* error -- not a hex digit */
} /* ctox */
int str2reg(unitptr reg,string digitstr)
/* Converts a possibly-signed digit string into a large binary number.
Returns assumed radix, derived from suffix 'h','o',b','.' */
{ unit temp[MAX_UNIT_PRECISION],base[MAX_UNIT_PRECISION];
int c,i;
boolean minus = FALSE;
short radix; /* base 2-16 */
mp_init(reg,0);
i = string_length(digitstr);
if (i==0) return(10); /* empty string, assume radix 10 */
c = digitstr[i-1]; /* get last char in string */
switch (c) /* classify radix select suffix character */
{
case '.': radix = 10;
break;
case 'H':
case 'h': radix = 16;
break;
case 'O':
case 'o': radix = 8;
break;
case 'B':
case 'b': radix = 2; /* caution! 'b' is a hex digit! */
break;
default: radix = 10;
}
mp_init(base,radix);
if ((minus = (*digitstr == '-')) != 0) digitstr++;
while ((c = *digitstr++) != 0)
{ if (c==',') continue; /* allow commas in number */
c = ctox(c);
if ((c < 0) || (c >= radix))
break; /* scan terminated by any non-digit */
mp_mult(temp,reg,base);
mp_move(reg,temp);
mp_init(temp,c);
mp_add(reg,temp);
}
if (minus) mp_neg(reg);
return(radix);
} /* str2reg */
#endif /* DEBUG */
/* These I/O functions, such as putstr, puthexbyte, and puthexw16,
are provided here to avoid the need to link in printf from the
C I/O library. This is handy in an embedded application.
For embedded applications, use a customized putchar function,
separately compiled.
*/
static void putstr(string s)
/* Put out null-terminated ASCII string via putchar. */
{ while (*s) putchar(*s++);
} /* putstr */
static void puthexbyte(byte b)
/* Put out byte in ASCII hex via putchar. */
{ static char *nibs = "0123456789ABCDEF";
putchar(nibs[b >> 4]);
putchar(nibs[b & 0x0F]);
} /* puthexbyte */
static void puthexw16(word16 w)
/* Put out 16-bit word in hex, high byte first. */
{ puthexbyte((byte)(w >> 8));
puthexbyte((byte)(w & 0xFF));
} /* puthexw16 */
#ifdef UNIT32
static void puthexw32(word32 lw)
/* Puts out 32-bit word in hex, high byte first. */
{ puthexw16((word16)(lw>>16));
puthexw16((word16)(lw & 0xFFFFL));
} /* puthexw32 */
#endif /* UNIT32 */
#ifdef UNIT8
#define puthexunit(u) puthexbyte(u)
#endif
#ifdef UNIT16
#define puthexunit(u) puthexw16(u)
#endif
#ifdef UNIT32
#define puthexunit(u) puthexw32(u)
#endif
#ifdef DEBUG
int display_in_base(string s,unitptr n,short radix)
/* Display n in any base, such as base 10. Returns number of digits. */
/* s is string to label the displayed register.
n is multiprecision integer.
radix is base, 2-16.
*/
{
char buf[MAX_BIT_PRECISION + (MAX_BIT_PRECISION/8) + 2];
unit r[MAX_UNIT_PRECISION],quotient[MAX_UNIT_PRECISION];
word16 remainder;
char *bp = buf;
char minus = FALSE;
int places = 0;
int commaplaces; /* put commas this many digits apart */
int i;
/* If string s is just an ESC char, don't print it.
It's just to inhibit the \n at the end of the number.
*/
if ((s[0] != '\033') || (s[1] != '\0'))
putstr(s);
if ( (radix < 2) || (radix > 16) )
{ putstr("****\n"); /* radix out of range -- show error */
return(-1);
}
commaplaces = (radix==10 ? 3 : (radix==16 ? 4 :
(radix==2 ? 8 : (radix==8 ? 8 : 1))));
mp_move(r,n);
if ((radix == 10) && mp_tstminus(r))
{ minus = TRUE;
mp_neg(r); /* make r positive */
}
*bp = '\0';
do /* build backwards number string */
{ if (++places>1)
if ((places % commaplaces)==1)
*++bp = ','; /* 000,000,000,000 */
remainder = mp_shortdiv(quotient,r,radix);
*++bp = "0123456789ABCDEF" [remainder]; /* Isn't C wonderful? */
mp_move(r,quotient);
} while (testne(r,0));
if (minus)
*++bp = '-';
if (commaplaces!=1)
while ((++places % commaplaces) != 1)
*++bp = ' '; /* pad to line up commas */
i = string_length(s);
while (*bp)
{ putchar(*bp);
++i;
if ((*bp == ',') || commaplaces==1)
if (i > (72-commaplaces))
{ putchar('\n');
i=string_length(s);
while (i--) putchar(' ');
i = string_length(s);
}
bp--;
}
switch (radix)
{ /* show suffix character to designate radix */
case 10: /* decimal */
putchar('.');
break;
case 16: /* hex */
putchar('h');
break;
case 8: /* octal */
putchar('o');
break;
case 2: /* binary */
putchar('b');
break;
default: /* nonstandard radix */
/* printf("(%d)",radix); */ ;
}
if ((s[0] == '\033') && (s[1] == '\0'))
putchar(' '); /* supress newline */
else putchar('\n');
fill0((byteptr)buf,sizeof(buf)); /* burn the evidence on the stack...*/
/* Note that local stack arrays r and quotient are now 0 */
return(places);
} /* display_in_base */
#endif /* DEBUG */
void mp_display(string s,unitptr r)
/* Display register r in hex, with prefix string s. */
{ short precision;
int i,j;
putstr(s);
normalize(r,precision); /* strip off leading zeros */
if (precision == 0)
{ putstr(" 0\n");
return;
}
make_msbptr(r,precision);
i=0;
while (precision--)
{ if (!(i++ % (16/BYTES_PER_UNIT)))
{ if (i>1)
{ putchar('\n');
j=string_length(s);
while (j--) putchar(' ');
}
}
puthexunit(*r);
putchar(' ');
post_lowerunit(r);
}
putchar('\n');
} /* mp_display */
word16 checksum(register byteptr buf, register word16 count)
/* Returns checksum of buffer. */
{ word16 cs;
cs = 0;
while (count--) cs += *buf++;
return(cs);
} /* checksum */
void cbc_xor(register unitptr dst, register unitptr src, word16 bytecount)
/* Performs the XOR necessary for RSA Cipher Block Chaining.
The dst buffer ought to have 1 less byte of significance than
the src buffer. Only the least significant part of the src
buffer is used. bytecount is the size of a plaintext block.
*/
{ short nunits; /* units of precision */
nunits = bytes2units(bytecount)-1;
make_lsbptr(dst,global_precision);
while (nunits--)
{ *dst ^= *post_higherunit(src);
post_higherunit(dst);
bytecount -= units2bytes(1);
}
/* on the last unit, don't xor the excess top byte... */
*dst ^= (*src & (power_of_2(bytecount<<3)-1));
} /* cbc_xor */
void hiloswap(byteptr r1,short numbytes)
/* Reverses the order of bytes in an array of bytes. */
{ byteptr r2;
byte b;
r2 = &(r1[numbytes-1]);
while (r1 < r2)
{ b = *r1; *r1++ = *r2; *r2-- = b;
}
} /* hiloswap */
#define byteglue(lo,hi) ((((word16) hi) << 8) + (word16) lo)
/**** The following functions must be changed if the external byteorder
changes for integers in PGP packet data.
****/
word16 fetch_word16(byte *buf)
/* Fetches a 16-bit word from where byte pointer is pointing.
buf points to external-format byteorder array.
*/
{ word16 w0,w1;
/* Assume MSB external byte ordering */
w1 = *buf++;
w0 = *buf++;
return(w0 + (w1<<8));
} /* fetch_word16 */
byte *put_word16(word16 w, byte *buf)
/* Puts a 16-bit word to where byte pointer is pointing, and
returns updated byte pointer.
buf points to external-format byteorder array.
*/
{
/* Assume MSB external byte ordering */
buf[1] = w & 0xff;
w = w>>8;
buf[0] = w & 0xff;
return(buf+2);
} /* put_word16 */
word32 fetch_word32(byte *buf)
/* Fetches a 32-bit word from where byte pointer is pointing.
buf points to external-format byteorder array.
*/
{ word32 w0,w1,w2,w3;
/* Assume MSB external byte ordering */
w3 = *buf++;
w2 = *buf++;
w1 = *buf++;
w0 = *buf++;
return(w0 + (w1<<8) + (w2<<16) + (w3<<24));
} /* fetch_word32 */
byte *put_word32(word32 w, byte *buf)
/* Puts a 32-bit word to where byte pointer is pointing, and
returns updated byte pointer.
buf points to external-format byteorder array.
*/
{
/* Assume MSB external byte ordering */
buf[3] = w & 0xff;
w = w>>8;
buf[2] = w & 0xff;
w = w>>8;
buf[1] = w & 0xff;
w = w>>8;
buf[0] = w & 0xff;
return(buf+4);
} /* put_word32 */
/*** End of functions that must be changed if the external byteorder
changes for integer fields in PGP packets.
***/
short mpi2reg(register unitptr r,register byteptr buf)
/* Converts a multiprecision integer from the externally-represented
form of a byte array with a 16-bit bitcount in a leading length
word to the internally-used representation as a unit array.
Converts to INTERNAL byte order.
The same buffer address may be used for both r and buf.
Returns number of units in result, or returns -1 on error.
*/
{ byte buf2[MAX_BYTE_PRECISION];
word16 bitcount, bytecount, unitcount, zero_bytes, i;
/* First, extract 16-bit bitcount prefix from first 2 bytes... */
bitcount = fetch_word16(buf);
buf += 2;
/* Convert bitcount to bytecount and unitcount... */
bytecount = bits2bytes(bitcount);
unitcount = bytes2units(bytecount);
if (unitcount > global_precision)
{ /* precision overflow during conversion. */
return(-1); /* precision overflow -- error return */
}
zero_bytes = units2bytes(global_precision) - bytecount;
/* Assume MSB external byte ordering */
fill0(buf2,zero_bytes); /* fill leading zero bytes */
i = zero_bytes; /* assumes MSB first */
while (bytecount--) buf2[i++] = *buf++;
mp_convert_order(buf2); /* convert to INTERNAL byte order */
mp_move(r,(unitptr)buf2);
mp_burn((unitptr)buf2); /* burn the evidence on the stack */
return(unitcount); /* returns unitcount of reg */
} /* mpi2reg */
short reg2mpi(register byteptr buf,register unitptr r)
/* Converts the multiprecision integer r from the internal form of
a unit array to the normalized externally-represented form of a
byte array with a leading 16-bit bitcount word in buf[0] and buf[1].
This bitcount length prefix is exact count, not rounded up.
Converts to EXTERNAL byte order.
The same buffer address may be used for both r and buf.
Returns the number of bytes of the result, not counting length prefix.
*/
{ byte buf1[MAX_BYTE_PRECISION];
byteptr buf2;
short bytecount,bc;
word16 bitcount;
bitcount = countbits(r);
#ifdef DEBUG
if (bitcount > MAX_BIT_PRECISION)
{ fprintf(stderr, "reg2mpi: bitcount out of range (%d)\n", bitcount);
return 0;
}
#endif
bytecount = bits2bytes(bitcount);
bc = bytecount; /* save bytecount for return */
buf2 = buf1;
mp_move((unitptr)buf2,r);
mp_convert_order(buf2); /* convert to EXTERNAL byteorder */
/* Assume MSB external byte ordering */
buf2 += units2bytes(global_precision) - bytecount;
buf = put_word16(bitcount, buf); /* store bitcount in external byteorder */
while (bytecount--) *buf++ = *buf2++;
mp_burn((unitptr)buf1); /* burn the evidence on the stack */
return(bc); /* returns bytecount of mpi, not counting prefix */
} /* reg2mpi */
#ifdef DEBUG
void dumpbuf(string s, byteptr buf, int bytecount)
/* Dump buffer in hex, with string label prefix. */
{ putstr(s);
while (bytecount--)
{ puthexbyte(*buf++);
putchar(' ');
if ((bytecount & 0x0f)==0)
putchar('\n');
}
} /* dumpbuf */
void dump_unit_array(string s, unitptr r)
/* Dump unit array r as a C array initializer, with string label prefix.
Array is dumped in native unit order.
*/
{ int unitcount;
unitcount = global_precision;
putstr(s);
putstr("\n{ ");
while (unitcount--)
{ putstr("0x");
puthexunit(*r++);
putchar(',');
if (unitcount && ((unitcount & 0x07)==0))
putstr("\n ");
}
putstr(" 0};\n");
} /* dump_unit_array */
#endif /* ifdef DEBUG */
/************ end of multiprecision integer I/O library *****************/