home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Share Gallery 1
/
share_gal_1.zip
/
share_gal_1
/
HR
/
HR020.ZIP
/
LAN-LNK.EXE
/
README.159
< prev
next >
Wrap
Text File
|
1991-03-26
|
5KB
|
127 lines
If you are new to LAN-LINK, don't be scared off by the size of
the program and the manual. LAN-LINK is built in a top down
structured manner. You can go into it as deep as you need. Begin
by using the QUICK MENU which gives you the most commonly used
features in one menu. Then, as you become familiar with LAN-LINK,
start to explore the other menus.
Before you operate for the first time, bring up LAN-LINK and use
the options in the Parameter Menu to configure LAN-LINK to your
station and way of operating. AS A MINIMUM, CHANGE THE
CALLSIGNS. Read SECTION 2 first and then later Section 18 of the
documentation to see what the customization is capable of.
Update/Save the configuration file when finished.
LAN-LINK uses HARDWARE Handshaking between the PC and the TNC,
you must have the cable wired correctly. A cable with three
signal wires will not work correctly. If you insist on using a 3
wire cable, you must set the DCD Flag (in the Parameter Menu) to
OFF.
LAN-LINK FILES
LAN-LINK.EXE The program, run it.
LAN-LINK.DOC The Documentation file.
KAM.SYS Configuration file for KAM.
KPC.SYS Configuration file for KPC-2.
LAN-LINK.SYS Configuration file (default )for PK232.
MFJ1278.SYS Configuration file for MFJ1278.
TNC1.SYS Configuration file for TNC1.
TNC2.SYS Configuration file for TNC2.
YAPP CNF Configuration file for YAPP (use in YAPP).
APPNOTES.001 LAN-LINK Application Note on Working SAREX
APPNOTES.002 LAN-LINK Application Note on Connecting to others
APPNOTES.003 LAN-LINK Application Note on Flow Control
BEGINNER.BBS Reprint of an article describing the features on, and
how to use a packet BBS.
PCZ.ZIP Zipped Public Domain Zmodem protocols for use with the
QZ*.BAT files.
QZ*.BAT Batch files which LAN-LINK will use for Zmodem Binary
File transfers.
If you don't have a PK232, rename LAN-LINK.SYS to PK232.SYS, then
rename your TNC.SYS file to LAN-LINK.SYS and configure it.
For example, if you are using a KAM,
rename LAN-LINK.SYS to PK232.SYS, then
rename KAM.SYS to LAN-LINK.SYS.
LAN-LINK will run unconfigured, but please configure the
callsigns at least.
Print or view the documenation file to find out more about LAN-
LINK.
READ THE DOCUMENTATION FILE.
Update Notes
If you are UPDATING from an earlier than 1.58 version of LAN-LINK
or any PK232COM, the Configuration files are not compatible to
that needed for 1.58. You must use the Configuration file(s)
supplied on this disk.
If you are updgrading from 1.58, you can use your old config-
uration file, ignore the error message when you bring it up for
the first time, and Update the file (Parameter menu, U option).
LAN-LINK 1.59 Registration Fee $35.00
PC-HAM 3.52 Registration Fee $36.50
WHATS-UP 1.00 Registration Fee $35.00
Special discount, $95.00 if all packages are registered at the
same time.
Evaluation Copies $5.00 per package, $10.00 for the set.
To: Joe Kasser G3ZCZ
P O BOX 3419
SILVER SPRING
MD 20918.
CALL ________________ TODAY'S DATE _____________
NAME ______________________________________________
ADDRESS ___________________________________________
___________________________________________
CITY ___________________________Telephone (___)____-____
STATE _________ POSTCODE ______________________
TNC TYPE _____________________ Home BBS __________
I enclose a check for ______. Please send me the latest version
of ______________, and register me as a user. I am currently
using version _____ which I obtained from _____________________.
I enclose a disks/sase or $5.00. ($10.00 for all programs).
Please send me the latest version of ______________________ to
evaluate. If I like it and use it, I plan to become a registered
user.
Disk Size 5.25 ______ 3.5 ______
Signature
3