home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Share Gallery 1
/
share_gal_1.zip
/
share_gal_1
/
HR
/
HR019.ZIP
/
TNC2CMDS.SET
< prev
next >
Wrap
Text File
|
1988-03-13
|
8KB
|
130 lines
*** TNC2 COMMANDS ***
8bitconv OFf High-order bit stripped in CONVers mode (ON- bit not stripped)
AUtolf ON <LF> sent to terminal after each <CR> (OFf- <LF> not sent)
AWlen 7 Number of data bits per word to terminal (7 or 8)
Ax25l2v2 OFf AX.25 Level 2 Version 1.0 (ON- Version 2.0)
AXDelay 0 Wait time in 10ms intervals in addition to TXdelay (0 - 180)
AXHang 0 Audio repeater 'hang time' in 100ms intervals (0 - 20)
Beacon Every 0 Send beacon in (n * 10s) intervals (0 - 250)
After n Send beacon once after (n * 10s) of no activity (0 - 250)
BELL ON When ON, a CTRL-G will ring your computers bell
BKondel ON <BS><SP><BS> echoed in response to ^H (OFf- <\> echoed)
BText Text to be sent for Beacon (120 char max)(% or & clears BText)
BUdlist OFf Ignore packets from stations IN LCAlls (ON-Ignore packets from
stations NOT in LCAlls)
CALibra Tranfer control to calibration routines. (<SP>,D,K,Q)
CALSet n Specify count set [(n=(525,000/f)+1]-modulate
[(262,500/f)+1]-demodulate
CANline $18 <^X> Character to cancel input since last <CR> ($00 - $7F)
CANPac $19 <^Y> Character to cancel input since last packet ($00 - $7F)
CHeck 30 Time in 10s intervals to check for disconnect (0 - 250)
CLKADJ 0 Correction factor for real-time clock (0 - 65535)
CMdtime 1 Transparent timeout in seconds - used for 'break' (0 - 250)
CMSg OFf CText not sent (ON-CText sent after connection by another TNC)
COMmand $03 <^C> Character to enter command mode from CONVers ($00 - $7F)
CONMode Convers Automatically enters Convers on connection (Trans-)
Connect call1 [Via call2[,call3[,...,call9]]]
CONPerm OFf Current stream may be connected to and disconnected from (ON-)
CONOk ON Connect requests accepted from other TNCs (OFf- Not accepted)
CONStamp OFf Connect status messages not time stamped (ON-Are time stamped)
CONVers Enter CONVers mode from Command mode (alternate- K)
CPactime OFf Packets not sent according to PACTime in CONVers mode (ON-)
CR ON SEndpac character sent along with packet (OFf- not sent)
CStatus Shows stream id and link status of all ten streams
(...P- Permanant)
CText Text sent on Connect if CMSg ON (120 char max- %, & to clear)
DAytime yymmddhhmm Set current date and time in 24 hour format
DAYUsa ON Date display format: mm/dd/yy (OFf-European format: dd-mm-yy)
DELete OFf Delete character is <BS> or $08 (ON- <DEL> or $7F)
DIGipeat ON TNC will digipeat packets on request (OFf- will not digipeat)
Disconne Initiate Disconnect sequence (Second one will disconnect
immediately without waiting for acknowledge packet)
DISPlay Display all control parameters and their current values
Async Synchronous port parameters
Characte Special characters
Id ID parameters
Link Link parameters
Monitor Monitor parameters
Timing Timing parameters
DWait 16 Wait time in 10ms intervals after last activity (0 - 250)
Echo ON Characters received echoed by TNC (OFf- Not echoed)
FILter OFF Filters out CTRL characters when ON
FRack 4 Frame acknowledge wait in 1s intervals (1 - 15) Retry
interval(sec)=n*(2*[# of relay stations]+1)
FUlldup OFf Full duplex mode disabled -DCD used (ON- Full duplex enabled)
HEaderln OFf Header on line with monitored packet text (ON- Seperate lines)
HId OFf (ON- ID packet every 9.5 minutes IF station is digipeating)
Id Sends special ID packet from command mode
K Equivalent of CONVers (undocumented)
LCAlls [call1[,call2[,...call8]]] Call list for BUdlist (& and % to clear)
LCok ON Lower case characters sent to terminal (OFf- Only upper case)
LCStream ON Case of Charac after STReamsw char not significant (OFf-signif)
PK-80 command only
LFadd OFf <LF> character not sent with each <CR> in packet
(ON- <LF> sent)
MAll ON All monitored packets displayed if Monitor is ON (OFf- Only
'unconnected' packets displayed)
MAXframe 4 Number of unacknowledged packets allowed (1 - 7)
MCOM OFf Only information packets monitored; <C>, <D>, <UA> and <DM>
frames not monitored (ON- All are monitored)
MCon ON Monitor mode enabled when TNC is connected (OFf- Disabled)
MFilter $00[,n2[,n3[,n4]]] Characters to be filtered by TNC ($00 - $7F)
MHClear Clears MHeard list
MHeard Lists last 20 calls with date (* indicates heard thru digi)
Monitor ON Enables general packet monitoring (OFf- Disables)
MRpt ON Display digipeat path for monitored packets (OFf- Only display
origin and destination stations)
MStamp OFf Monitored frames are not time stamped (ON- each time stamped)
MYcall NOCALL[-n] Your call sign (optional -n: 0 - 15)
MYAlias call[-n] Alternate call sign for use as digipeater (-n: 0 - 15)
NEwmode OFf Switch on to CONVers or Trans mode on connection only (ON-
Switching to data transfer mode occurs at time of Connect
command AND returns to command mode after disconnect)
NOmode OFf Mode switching determined by NEwmode (ON- switches by user
command only) PK-80 command only
NUcr OFf Null characters not sent to terminal after <CR> (ON- Sent)
NULf OFf Null characters not sent to terminal after <LF> (ON- Sent)
NULLs 0 Number of nulls to sent after <CR> or <LF> (0 - 30)
Paclen 128 Maximum length of data part of packet (0 - 255, 0=256)
PACTime After 10 Input bytes sent after n*100 ms with no input (0 - 250)
(Every n Input bytes sent every n*100 ms - No zero length packets)
PARity 3 Parity bit setting to terminal (0- or 2- none; 1- odd; 3- even)
PASs $16 <^V> Input character following this one is sent without being
interpreted as a command ($00 - $7F)
PASSAll OFf TNC only accepts packet with valid CRC (ON-Accepts any packet)
RECOnnect Change connection path while connected: Argument per Connect
REDispla $12 <^R> Character to redisplay last input line ($00 - $7F)
RESET Resets all parameters to TAPR default settings
RESptime 12 Minimum delay (n*100ms) until acknowledge packet sent (0 - 250)
RESTART Reinitializes TNC to user default settings in bbRAM
REtry 10 Maximum number of packet retries (0 - 15; 0 - infinite retries)
Screenln 80 Number of bytes sent to terminal before extra <CR><LF> is sent
(0 - 255; 0 - disable)
SEndpac $0D <^M> Character to force packet to be sent ($00 - $7F)
STArt $11 <^Q> Input character to restart output from TNC after STOp
($00 - $7F)
STOp $13 <^S> Input character to stop output from TNC to terminal
($00 - $7F)
STREAMCa OFf Call sign of other station not displayed (ON- )
STREAMDb OFf Do not double all RECEIVED switch characters (ON- Double)
STReamsw $7C <|> Stream switch character ($00 - $7C)
TRACe OFf (ON- Display trace mode with hex, shifted ASCII and ASCII)
Trans rol only for terminal (ON- XON/XOff enabled in
transparent mode)
TRIes n Current number of REtry level (0 - 15)
TXdelay 30 Wait time after key up before sending packet n*10ms (0 - 120)
TXFlow OFf Hardware control only for TNC (ON- XON/XOff enabled in
transparent mode)
Unproto call1[Via call2[,...call9]] TO address of unconnected packets (CQ)
USers 1 Number of active input connections allowed (0 - 10; 0=10)
Xflow ON XON/XOff software flow control enabled (OFf- Disabled)
XMitok ON Transmit enabled (OFf- Disabled)
XOff $13 <^S> Character output by TNC to stop terminal input ($00 - $7F)
XON $11 <^Q> Character output by TNC to start terminal input ($00 - $7F)
-----------E N D----------