home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Share Gallery 1
/
share_gal_1.zip
/
share_gal_1
/
BF
/
BF154.ZIP
/
README.DOC
< prev
next >
Wrap
Text File
|
1991-09-03
|
4KB
|
73 lines
ICP version 6.0
README.DOC
Please follow these instructions to install the ICP...
1. Type "install <source drive: target drive>" and press the
'enter' key. For example, if the program disk is in drive A
(source drive) and you wish to install the system on drive C
(target drive) type "install a: c:" and hit 'enter'. The system
will be installed in c:\icp.
The install program will install the ICP system in the
default directory x:\ICP where 'x' is the target drive. If you
desire to install in another directory, copy the unpack.exe file
to the directory of choice, move to that directory and type
'unpack' then hit the 'enter' key
2. A config.sys file has been provided which you may copy to the
root directory of your hard drive. However, you should not do
this unless you are absolutely certain that a config.sys file
does not already exist which might have command essential to your
computer system or other software products you are using. If you
are unsure about this, go to the root directory of the hard disk
(boot drive) and examine the directory very carefully for the
existence of this file. If you do find a config.sys file , use
the DOS "Edlin" utility to verify that the files and buffers are
properly set... The following lines should be present in the
config.sys file.
1. files = 29
2. buffers = 20
The files should be set odd because of a bug in DOS causing
too much memory to be allocated for even numbered handle re-
quests. Research has shown that "20" is the optimum number of
buffers for this application.
The Shareware version of the ICP contains several docu-
ment (*.doc) files that you should read before attempting to run
the program. Only "Readme.doc" and "Vendor.doc" will be available
before the system is "unpacked".
1. Manual.doc is the ICP User's Guide.
2. Files.doc is the ICP "packing list" and lists all the
files which must be present in order to run the program.
3. Register.doc is the shareware registration and in-
voice. You must complete and return this form to Spirit7 in order
to register your copy of the software.
4. Vendor.doc is included for software vendors who may
wish to distribute this program. This file includes vendor cata-
log descriptions and other information specifically for vendors.
5. Readme.doc is this file.
6. Pics.doc discribes the PICS point-of-sale package.
7. Custom.doc describes our the software customizing
service.
8. Utility.doc describes the PICS/ICP utility program.
You may print document files by typing the command "print
<file.ext>". For example, to print the readme.doc file, type
"print readme.doc " and hit the ENTER key. You may view document
files by entering the command "view <file.ext>". For example, to
view the readme.doc file, type "view readme.doc" and echo hit the
ENTER key.