home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Share Gallery 1
/
share_gal_1.zip
/
share_gal_1
/
BF
/
BF130.ZIP
/
MORTCOMP.ZIP
/
MANUAL.NOT
< prev
next >
Wrap
Text File
|
1990-12-30
|
3KB
|
35 lines
*****************************************************************************
* *
* The manual is formatted to print on a laser printer with ten *
* point helvetica type face. It has been reformatted to print *
* on dot matrix printers. These printers simply cannot reproduce *
* a document designed for the laser printers. Thus the formatting *
* is not a neat as you will find in the printed manual. *
* *
*****************************************************************************
* *
* You might find it necessary to set your printer to print 12 *
* characters per inch if the print runs off the right side *
* of the paper. If your printer does not have a 12 character per *
* inch setting, use condensed print. *
* *
*****************************************************************************
* *
* *
* LASER PRINTERS *
* *
* If your printer is a laser printer, it thinks a page has only *
* 60 lines of print. You can tell it differently. For this manual *
* to print properly on laser printers, you must tell the printer *
* to print 66 lines per page. HP Laser Jet series II printers *
* can do this through the front panel switches. If your printer *
* does not have a menu or switches on the front panel, you will *
* need to refer to the printer manual to learn how to set the *
* printer. If you don't set the printer, it will print 60 lines *
* and eject the page. It will then print 6 lines on the next page *
* and eject it. This will continue until the document is printed. *
* *
*****************************************************************************