home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The SelectWare System Volume 2 #3
/
The_SelectWare_System_Series_1_Volume_2_Number_3_Selectware.iso
/
com20020
/
read.me
< prev
next >
Wrap
Text File
|
1987-12-20
|
2KB
|
62 lines
*** SUPERPROJECT EXPERT 3.00 README FILE -- 9/11/87 ***
========================================================
This file contains new information not contained in the
SuperProject Expert User's Guide. We hope you will find
it helpful.
========================================================
ACTIVATE.EXE FILE
--------------------------------------------------------
If you are planning to use SuperProject Expert on a
network with SuperCalc4, do not put the SuperProject
ACTIVATE.EXE program in the same directory as SuperCalc4
ACTIVATE. They have the same name and will overwrite
each other.
========================================================
COMMAND LINE OPTIONS -- MONITOR DISPLAYS
--------------------------------------------------------
Page 2-13 of your SuperProject Expert User's Guide
tells how you can give commands when first loading
SuperProject to run macros, load preference files, and
perform other setup operations.
--------------------------------------------------------
Two of these commands control monitor display and are
of special interest to those with
* LCD monitors or monochrome monitors without a dim attribute.
* EGA, VGA, or compatible high-resolution display boards.
--------------------------------------------------------
To use these commands, type the command after you type SPJ
at the DOS prompt. The commands are as follows:
/L Indicates LCD or other monochrome monitor without a
dim attribute. Restricted choice fields will be underlined
instead of displayed in dim.
/V Indicates that you are using EGA or VGA and that you want
to display 43 or 50 lines on the screen.
========================================================
SUPERPROJECT DEMONSTRATION
--------------------------------------------------------
ATTENTION
To run the SuperProject Expert demo and tutorial, you must be
running on a hard-disk with all program files present.
The Utility disk contains macros that demonstrate SuperProject
and run the tutorial. To use on a network system, copy all the
.XQT files, ELM_HIGH.PJ and MOVE.PJ to a directory with read/write
access, or run the macros directly from the utility floppy disk.