home *** CD-ROM | disk | FTP | other *** search
/ Programming Languages Suite / ProgLangD.iso / Bonus / WIN95OEM / SETUP.TXT < prev    next >
Encoding:
Text File  |  1995-07-11  |  33.8 KB  |  856 lines

  1.  
  2.   -------------------------------------------------------------------
  3.                     Microsoft Windows 95 README for Setup
  4.                                August 1995            
  5.   -------------------------------------------------------------------
  6.  
  7.                   (c) Copyright Microsoft Corporation, 1995
  8.  
  9.  
  10. This document provides complementary or late-breaking information to
  11. supplement the Microsoft Windows 95 documentation.
  12.  
  13. ------------------------
  14. How to Use This Document
  15. ------------------------
  16.  
  17. To view Setup.txt on screen in Notepad, maximize the Notepad window.
  18.  
  19. To print Setup.txt, open it in Notepad or another word processor, and 
  20. then use the Print command on the File menu.
  21.  
  22. --------
  23. CONTENTS
  24.  
  25. SETUP.TXT
  26. FINDING AND FIXING HARD-DISK PROBLEMS DURING SETUP (USING SCANDISK)
  27. UNINSTALLING WINDOWS 95
  28. IF YOU HAVE A COMPRESSED DRIVE
  29. INSTALLING WINDOWS 95 OVER WINDOWS NT 
  30. INSTALLING WINDOWS 95 OVER OS/2
  31. INSTALLING WINDOWS 95 ON COMPUTERS WITH LANTASTIC
  32. SETUP ERROR MESSAGES
  33. GENERAL SETUP NOTES
  34. MEMORY MANAGERS
  35. DISK-CACHE PROGRAMS
  36. ANTI-VIRUS SOFTWARE
  37. USING TERMINATE-AND-STAY-RESIDENT (TSR) PROGRAMS AND DRIVERS
  38. KNOWN POTENTIAL SETUP PROBLEMS
  39. --------
  40.  
  41.  
  42. SETUP.TXT
  43. =========
  44.  
  45. This file contains information about problems that may occur while
  46. you are running Windows 95 Setup.
  47.  
  48. NOTE: It is recommended that you check your hard disk for viruses
  49. before setting up Windows 95. If you have MS-DOS 6.x, you should
  50. run MSAV before running Setup.
  51.  
  52. You should also turn off any screen savers you have running, and
  53. disable any anti-virus software that is running before you start Setup.
  54.  
  55.  
  56. FINDING AND FIXING HARD-DISK PROBLEMS DURING SETUP (USING SCANDISK)
  57. ===================================================================
  58. Windows 95 Setup automatically runs ScanDisk to check for problems
  59. on your hard disk(s). If there are problems, Setup cannot continue
  60. until they are fixed.
  61.  
  62. NOTE: The MS-DOS-based version of ScanDisk that Setup runs may detect
  63. long filename errors, but it cannot correct them. These errors will
  64. not prevent Setup from proceeding, but once it completes, you should
  65. run the new Windows version of ScanDisk from within Windows 95 to
  66. correct these errors.
  67.  
  68. Fixing Hard-Disk Problems
  69. -------------------------
  70. If you see a message during Setup that says you must run ScanDisk to
  71. fix problems on your hard disk, follow these steps to fix the problems.
  72.  
  73. If you are setting up Windows 95 over MS-DOS or a previous version of
  74. Windows, such as Windows 3.1:
  75.  
  76. 1. Quit Windows.
  77. 2. If you are setting up from floppy disks, insert Setup Disk 1 into 
  78.    the drive, and then type the following at the command prompt:
  79.  
  80.     a:scandisk.exe /all
  81.  
  82.    where "a" is the drive that contains the Windows disk.
  83.  
  84.    If you are setting up from a CD-ROM, insert the CD-ROM and then type
  85.    the following:
  86.  
  87.         f:\win95\scandisk.exe /all
  88.  
  89.    where "f" is the drive that contains the CD-ROM.
  90.  
  91. 4. Follow the instructions on your screen and fix any problems that
  92.    ScanDisk finds.
  93. 5. Start Windows, and then run Setup again.
  94.  
  95. If you are setting up Windows 95 over a previous version of Windows 95:
  96.  
  97. 1. Quit Setup.
  98. 2. On the Start menu, point to Programs, point to Accessories, point 
  99.    to System Tools, and then click ScanDisk.
  100. 3. Check your your hard disk(s) and any host drives you have for errors,
  101.    and repair any problems found.
  102.  
  103. NOTE: If you are running Setup from MS-DOS, ScanDisk will run and you'll
  104. be able to fix most problems from within Setup.
  105.  
  106. Problems Running ScanDisk
  107. -------------------------
  108. If you get a message during Setup saying that there is not enough memory
  109. to run ScanDisk, free some conventional and/or upper memory, and then run
  110. Setup again. If you have MS-DOS 6.x, try running MEMMAKER to free memory.
  111.  
  112. If you still don't have enough memory, or if you have other problems while
  113. Setup is running ScanDisk, then you can bypass ScanDisk in Setup by running
  114. Setup with the /IS option. To do this, type the following command:
  115.  
  116.     setup /is
  117.  
  118. NOTE: Bypassing ScanDisk during Setup is not recommended. If you do, 
  119. there may be problems with your hard disk that could cause Windows 95
  120. not to install or run correctly.
  121.  
  122. If you still have problems after running Setup with the /IS option, try 
  123. running Setup with the /IQ option. To do this, type the following command:
  124.  
  125.         setup /is /iq
  126.  
  127.  
  128. UNINSTALLING WINDOWS 95
  129. =======================
  130.  
  131. During Setup, you'll have the option of saving your system files so that
  132. you can uninstall Windows 95 later. If you want to be able to uninstall 
  133. Windows 95 later, choose Yes. Setup will save your system files in a 
  134. hidden, compressed file. If you don't need to be able to uninstall 
  135. Windows 95 later, choose No.
  136.  
  137. You will not see this Setup option if:
  138. - You are upgrading over an earlier version of Windows 95.
  139. - You are installing to a new directory.
  140. - You are running a version of MS-DOS earlier than 5.0.
  141.  
  142. NOTE: The uninstall files must be saved on a local hard drive. You 
  143. cannot save them to a network drive or a floppy disk. If you have 
  144. multiple local drives, you will be able to select the one you want to 
  145. save the uninstall information on.
  146.  
  147. NOTE: If you see a message during Setup about not being able to save 
  148. your system files, see the "Setup Error Messages" section later in this 
  149. document.
  150.  
  151. To uninstall Windows 95 and completely restore your system to its
  152. previous versions of MS-DOS and Windows 3.x:
  153.  
  154. 1. Click the Start button, point to Settings, and then click Control 
  155.    Panel.
  156. 2. Double-click Add/Remove Programs.
  157. 3. On the Install/Uninstall tab, click Windows 95, and then click 
  158.    Remove.
  159.  
  160. Or, if you are having problems starting Windows 95, use your startup
  161. disk to start your computer, and then run UNINSTAL from the startup
  162. disk.
  163.  
  164. NOTE: The uninstall program needs to shut down Windows 95. If there is 
  165. a problem with this on your computer, restart your computer and press
  166. F8 when you see the message "Starting Windows 95." Then choose
  167. Command Prompt Only and run UNINSTAL from the command prompt.
  168.  
  169. If Setup did not complete successfully and you want to restore your
  170. previous versions of MS-DOS and Windows, you can run UNINSTAL from the
  171. \Windows\Command directory on your hard disk, or from your startup disk
  172. if you created one.
  173.  
  174. If you saved your files on a drive other than C, you can use the /w 
  175. option to specify the drive where the files are located. For example:
  176.  
  177.         uninstal /w e:
  178.  
  179. where e: is the drive containing your previous system files that were
  180. saved.
  181.  
  182. If Windows 95 is running and you want to remove the uninstall files to 
  183. free up disk space (6 to 9MB), follow these steps:
  184.  
  185. 1. Click the Start button, point to Settings, and then click Control 
  186.    Panel.
  187. 2. Double-click Add/Remove Programs.
  188. 3. On the Install/Uninstall tab, click Old Windows 3.x/MS-DOS System 
  189.    Files, and then click Remove.
  190.  
  191. You will no longer be able to uninstall Windows 95.
  192.  
  193.  
  194. IF YOU HAVE A COMPRESSED DRIVE
  195. ==============================
  196.  
  197. If you have used compression software to compress your hard disk, you
  198. may get a message saying that there is not enough space on the host
  199. partition of the compressed drive. Setup may have to copy some files
  200. to your startup drive, the host for your startup drive, or the host
  201. for your Windows drive. If you get this message, you should free up
  202. some space on the specified drive, and then run Setup again. Try one
  203. of the following:
  204.  
  205. - If you are setting up Windows on a compressed drive, try setting it
  206.   up on an uncompressed drive if possible.
  207. - Delete any unneeded files on your host partition.
  208. - If you are running Windows 3.1 and have a permanent swap file, try
  209.   making it smaller. In Control Panel, double-click the 386 Enhanced
  210.   icon, and then click Virtual Memory. Then modify the size of your
  211.   swap file.
  212. - Use your disk compression software to free up some space on the host
  213.   drive for the compressed drive. If you compressed your drive by using
  214.   DriveSpace or DoubleSpace, follow these steps:
  215.  
  216.   1. Quit Windows.
  217.   2. Run Drvspace.exe or Dblspace.exe.
  218.   3. Select the compressed drive on whose host you want to free space.
  219.   4. On the Drive menu, click Change Size.
  220.  
  221.   If you used other compression software, such as Stacker, consult the
  222.   documentation that came with it.
  223.  
  224. NOTE: If you notice a discrepancy in the amount of free space reported
  225. by Setup and the amount of space you think is available on your host
  226. drive, it may be because Windows uses some space for creating a swap
  227. file. This may not appear to take up any space when Windows is not
  228. running. 
  229.  
  230. NOTE: If you create a startup disk during Setup, make sure you do not
  231. use a compressed disk for the startup disk.
  232.  
  233. If You Have SuperStor Compression
  234. ---------------------------------
  235. If you have compressed your hard disk by using SuperStor, Setup may not
  236. be able to find your startup drive and install Windows 95. If you get a
  237. message about this during Setup, uncompress your disk and remove 
  238. SuperStor, then run Setup again.
  239.  
  240. If You Have XtraDrive Compression
  241. ---------------------------------
  242. If you have compressed your hard disk by using XtraDrive and you are
  243. upgrading a previous version of Windows, Setup will not be able to
  244. install Windows 95 unless you turn off XtraDrive's write-cache. To
  245. turn this off, carry out the following procedure:
  246.  
  247. 1. Quit Windows.
  248. 2. Run Vmu.exe (XtraDrive's Volume Maintenance Utility).
  249. 3. Choose Advanced Options, and then press ENTER.
  250. 4. Set the EMS cache size to 0.
  251. 5. Set the Conventional cache size to 1 (the minimum).
  252. 6. Set Allow Write Caching to NO.
  253. 7. At the confirmation prompt, choose Yes. You will see a message 
  254.    saying that you must restart your computer for the changes to take 
  255.    effect.
  256. 8. Quit Volume Maintenance Utility, and then restart your computer.
  257. 9. Start Windows, and then run Setup again.
  258.  
  259.  
  260. INSTALLING WINDOWS 95 OVER WINDOWS NT 
  261. =====================================
  262.  
  263. If you are multi-booting MS-DOS and Windows NT, boot to MS-DOS, and 
  264. then run Setup from either MS-DOS or Windows 3.x. You will not be able 
  265. to install Windows 95 to a directory with a shared Windows 3.x/Windows NT
  266. configuration; you will need to install Windows 95 to a different
  267. directory.
  268.  
  269. If you are not multi-booting MS-DOS and Windows NT, you should
  270. configure your computer to multi-boot MS-DOS and Windows NT first, and
  271. then follow the instructions above.
  272.  
  273. If you boot MS-DOS from a floppy disk and then run Setup, you will no
  274. longer be able to boot Windows NT; however, you can restore Windows NT
  275. by booting from the Windows NT boot/repair disk, and then selecting the
  276. Repair option).
  277.  
  278.  
  279. INSTALLING WINDOWS 95 OVER OS/2
  280. ===============================
  281.  
  282. Setup will not run on OS/2. You need to boot to MS-DOS and run Setup 
  283. from the MS-DOS prompt.
  284.  
  285. NOTE: If you are upgrading over OS/2 on an HPFS partition, you will
  286. need to have your OS/2 disk 1 available during Setup.
  287.  
  288. If you are using OS/2 Boot Manager to choose operating systems at
  289. startup, Setup will disable Boot Manager to ensure that Windows 95 can
  290. restart the computer and complete its installation. Boot Manager can be
  291. reactivated by running the Fdisk utility that comes with Windows 95
  292. (see the procedure at the end of this section).
  293.  
  294. If you are not using Boot Manager, configure your computer to use Boot 
  295. Manager, and then follow the instructions above.
  296.  
  297. If you boot MS-DOS from a floppy disk and then run Setup, you will no
  298. longer be able to boot OS/2 after Windows 95 has been installed. You
  299. will need to delete the Autoexec.bat and Config.sys files that OS/2
  300. uses before running Windows 95 Setup.
  301.  
  302. If you want to remove OS/2 from your computer after you have installed
  303. Windows 95, carry out the following procedure:
  304.  
  305. 1. Back up the data files you want to keep onto a floppy disk or 
  306.    network drive.
  307. 2. Delete the files in each of your OS/2 directories and subdirectories,
  308.    and then delete the OS/2 directories.
  309. 3. In the root directory, the following files are marked as hidden 
  310.    system files and need to be deleted:
  311.  
  312.     Ea data.sf
  313.     OS2ldr.msg
  314.     OS2krnl
  315.     OS2boot
  316.     Wp data.sf
  317.  
  318.    In My Computer or Windows Explorer, make sure hidden files are 
  319.    visible. To do this, click the View menu, click Options, and then 
  320.    click Show All Files. Then delete the OS/2 files listed above.
  321.  
  322.    NOTE: If you have a version of OS/2 other than version 2.0, the 
  323.    names of the OS/2 files on your hard disk may differ from those 
  324.    listed above. Also, depending on which version of OS/2 you have, 
  325.    in your root directory, you may see the following files, which you 
  326.    can delete:
  327.  
  328.     OS2dump
  329.     OS2ldr
  330.     OS2logo
  331.     OS2ver
  332.  
  333. 4. Remember to empty the Recycle Bin to permanently remove the files 
  334.    from your computer.
  335.  
  336. If Boot Manager is installed and you want to remove it, restart your 
  337. computer, and then carry out the following procedure. (It is recommended 
  338. that you print this file before restarting your computer.)
  339.  
  340. 1. When you see the Boot Manager menu, choose to boot to MS-DOS, and 
  341.    then run FDisk.
  342. 2. Choose to make the MS-DOS partition (C) your active partition.
  343. 3. Quit FDisk, and then restart your computer.
  344.  
  345. If you want to reinstate Boot Manager after you install Windows 95, 
  346. carry out the following procedure:
  347.  
  348. 1. On the Start menu, click Run, and then type FDISK.
  349. 2. Choose Option 2, Set Active Partition.
  350. 3. Enter the number of the Boot Manager Partition. This partition will 
  351.    be the 1 MB non-MS-DOS partition usually placed at the top or bottom.
  352. 4. Quit FDisk, and then restart your computer as instructed.
  353.  
  354. You can now boot OS/2 at any time and change labels of partitions
  355. in Boot Manager through the OS/2 FDisk program.
  356.  
  357.  
  358. INSTALLING WINDOWS 95 ON COMPUTERS WITH LANTASTIC
  359. =================================================
  360.  
  361. If you are running the LANtastic server, you must disable it before
  362. setting up Windows 95. To disable the LANtastic server, either remove
  363. the Server.exe file from your Autoexec.bat file, or type the following
  364. command:
  365.  
  366.     server /remove
  367.  
  368. If you are running LANtastic and have either mapped or shared your
  369. startup drive (usually drive C), Setup will not be able to determine
  370. which drive is your startup drive and will not be able to continue.
  371.  
  372. Before running Setup, you must disable the mapping or stop sharing your
  373. startup drive.
  374.  
  375.  
  376. SETUP ERROR MESSAGES
  377. ====================
  378.  
  379. This section lists specific messages that you may encounter during Setup
  380. and provides information about what to do next.
  381.  
  382. SU-0010, SU-0012, SU-0015, SU-0016
  383. ----------------------------------
  384. If you receive one of these messages during Setup, please see the 
  385. sections about OS/2 and Windows NT earlier in this document.
  386.  
  387. SU-0011
  388. -------
  389. If your hard disk is password-protected, Setup will not be able to 
  390. complete successfully. You must first remove the password protection. 
  391. For more information, see the documentation that came with your computer.
  392.  
  393. SU-0013
  394. -------
  395. To set up Windows 95, your startup drive must be an MS-DOS boot partition.
  396. If your startup drive is an HPFS or Windows NT file system, you must create
  397. an MS-DOS boot partition before running Setup. For more information, on
  398. creating an MS-DOS boot partition, see the documentation that came with
  399. your computer.
  400.  
  401. If you have LANtastic networking or SuperStor compression, see those
  402. sections earlier in this document for more information.
  403.  
  404. SU0167
  405. ------
  406. If you have a directory named Desktop in your current Windows
  407. directory, Setup will not be able to install Windows 95 into that
  408. directory. Windows 95 creates a directory named Desktop and uses it
  409. for system files. If you get this message during Setup, you should
  410. rename or move your current Desktop directory. Then run Setup again.
  411.  
  412. Standard Mode Messages
  413. ----------------------
  414. If you get any of the following error messages, you should remove
  415. any memory managers (such as EMM386.exe, QEMM, or 386Max) from your
  416. Config.sys file, and then run Setup again.
  417.  
  418.     Standard Mode: Invalid DPMI return.
  419.     Standard Mode: Fault in MS-DOS Extender.
  420.     Standard Mode: Bad Fault in MS-DOS Extender.
  421.     Standard Mode: Unknown stack in fault dispatcher.
  422.     Standard Mode: Stack Overflow.
  423.  
  424. NOTE: If you still have problems, try adding EMM386.EXE back into your
  425. Config.sys file and exclude all ranges. For example,
  426.  
  427.     device=c:\windows\emm386.exe x=A000-FFFF
  428.  
  429. If you encounter these messages or random hangs during Setup, you may 
  430. need to turn on double-buffering in SmartDrive. Several SCSI hard drives 
  431. and some ESDI drives require double-buffering.
  432.  
  433. To turn on double buffering, add the following line to the beginning of
  434. your Config.sys file:
  435.  
  436.     device=c:\windows\smartdrv.exe /double_buffer+
  437.  
  438. where "c:\windows" is the path to your Windows directory.
  439.  
  440. Cannot Read Setup (.cab) Files
  441. ------------------------------
  442. If you have Multimedia Cloaking and are installing Windows 95 from
  443. floppy disks, Setup may not run successfully. If you see messages about
  444. Setup not being able to read .cab files, then you should follow these 
  445. steps:
  446.  
  447. 1. Remove the line referencing Cacheclk.exe from your Config.sys and
  448.    Autoexec.bat files.
  449. 2. Restart your computer.
  450. 3. Run Setup again.
  451.  
  452. Setup Could Not Back Up Your System Files
  453. -----------------------------------------
  454. If you see an error message while Setup is saving your system files, 
  455. there may not be enough disk space, particularly on compressed disks. 
  456. You should free up space on the drive you are saving your system files 
  457. on (the default drive is C) by removing unneeded files.
  458.  
  459. Cannot continue on this system configuration
  460. --------------------------------------------
  461. If you get a message saying "Setup cannot continue on this system
  462. configuration," you may have an older, incompatible disk partition.
  463. Before running Setup, you will need to back up your data and then
  464. repartition your disk.
  465.  
  466.  
  467. GENERAL SETUP NOTES
  468. ===================
  469.  
  470. This section includes notes on specific system configurations that may 
  471. prevent Setup from installing Windows 95 successfully.
  472.  
  473. Sager NP8200 or Wedge Technologies 466/DX2
  474. ------------------------------------------
  475. WARNING: If you install Windows 95 on a Sager NP8200 or Wedge Technologies
  476. 466/DX2 laptop computer, you will not be able to use your computer, even 
  477. if you reinstall a previous version of Windows.
  478.  
  479. Plug and Play Network Cards and 16-Bit Real-Mode Drivers
  480. --------------------------------------------------------
  481. When you need to run the 16-bit real-mode driver for your NIC (which is
  482. common if you use DLC or another real-mode protocol), your Plug and Play
  483. card may appear not to function because the 16-bit NIC drivers load before 
  484. Windows 95 has a chance to turn on Plug and Play cards. Also, some 16-bit 
  485. NIC drivers do not recognize Plug and Play cards (most NE2000 Plug and
  486. Play clones fall into this category).
  487.  
  488. To use your Plug and Play card with a 16-bit NIC driver, carry out the
  489. following procedure:
  490. 1. Run the Softset utility that comes with your Plug and Play card,
  491.    and set the card to non-Plug and Play mode.
  492. 2. Double-click the Network icon in Control Panel and then remove the net
  493.    card.
  494. 3. Double-click the Add New Hardware icon in Control Panel and follow the
  495.    instructions on your screen. Windows 95 will detect your network card.
  496.  
  497. If you change to a 32-bit protected-mode NIC driver in the future, you 
  498. can rerun Softset to turn on Plug and Play mode for your card.
  499.  
  500. Intel EtherExpress 16 NICs and PCI Computers
  501. --------------------------------------------
  502. You may experience system hangs or initialization problems if you are
  503. using an Intel EtherExpress 16 NIC in a PCI computer with some Diamond
  504. Speed Star PCI video cards. The following are excerpts from Intel's
  505. Customer Support Database. These problems are not related to Windows 95, 
  506. and happen on a variety of operating system platforms. In general, if
  507. you experience other problems with your EtherExpress 16 in a PCI computer,
  508. please attempt to replace the card before reporting the problem to
  509. Microsoft.
  510.  
  511. If you have one of these video cards, contact your vendor about getting
  512. a new video BIOS update.
  513.  
  514. - Diamond Speed Star PCI video card with BIOS version 1.01
  515. - Diamond Viper PCI VGA Video Adapter
  516. - Diamond Stealth video card, Bios v1.03
  517.  
  518. IBM Thinkpad Model 750x/755x/360x
  519. ---------------------------------
  520. If you have one of these models, (including submodels such as C, CE, CX, 
  521. CS, and CSE), check IBM's bulletin board or the THINKPAD forum on 
  522. CompuServe for an updated BIOS and/or Mwave drivers for your computer 
  523. before you install Windows 95.
  524.  
  525. If you don't upgrade your BIOS, you might have problems if you move the 
  526. mouse while your computer is turning suspend mode on or off.
  527.  
  528.  
  529. MEMORY MANAGERS
  530. ===============
  531.  
  532. If you have QEMM installed on your computer, we recommend removing it 
  533. from your Config.sys file before setting up Windows 95. You can add it 
  534. back after Windows 95 is installed.
  535.  
  536. The following memory managers are incompatible with or may cause
  537. problems with Windows 95. It is recommended that you remove all
  538. references to them from your Config.sys and Autoexec.bat files and use
  539. Emm386.exe and Himem.sys, which are provided with Windows 95, to manage
  540. memory instead.
  541.  
  542.         Allemm4.sys - All Charge 386 Version 3.1
  543.         HPemm386.sys and HPemm486.sys
  544.         HPmm.sys - HP Memory Manager (must remove before Setup)
  545.         Iemm.sys Memory Manager
  546.         Intel(R) Expanded-Memory Emulator (Ilim386.sys)
  547.         Maximizer Memory Manager (Maximize.com)
  548.         NetRoom Memory Manager (RM386.sys)
  549.     QMAPS Memory Manager Version 5.16
  550.     UMB PRO Version 1.07
  551.  
  552. NOTE: The documentation for 386MAX recommends against setting the EXT
  553. parameter below 64. If you set this parameter to 0, Setup will fail.
  554.  
  555. NOTE: If you remove the line containing Rm386.sys from your Config.sys
  556. file, you may need to install Himem.sys, which comes with Windows or
  557. MS-DOS. You can do this by adding the following line to your Config.sys
  558. file:
  559.  
  560.         device=<path>\himem.sys                                       
  561.  
  562. The <path> is the location of your Windows or MS-DOS files (for example,
  563. C:\Windows).
  564.  
  565.  
  566. DISK-CACHE PROGRAMS
  567. ===================
  568.  
  569. Before you run Setup, it is recommended that you remove any third-
  570. party disk-cache programs and replace them with Smartdrv.exe, which 
  571. is provided with Windows 95.
  572.  
  573. While running Windows 95, you do not need to use a disk-cache utility. 
  574. Setup will remove most disk-cache programs for you.
  575.  
  576. If you are running one of the following disk-cache utilities, you
  577. should remove it. In some cases, Setup will remove it for you.
  578.  
  579.   386MAX Disk-Cache Utility (Qcache.exe) (do not use with SmartDrive)
  580.   Cache.exe Disk-Cache Utility
  581.   Cache.sys Disk-Cache Utility
  582.   Flash Disk-Cache Utility (Flash.exe) (do not use with SmartDrive)
  583.   Hyperdisk Disk-Cache Utility (do not use with SmartDrive)
  584.   Icache.sys Disk-Cache Utility 
  585.   IBMcache.sys Disk-Cache Utility 
  586.   Mace Disk-Cache Utility (Mcache.sys)
  587.   Norton Speed Drive Disk Utility (SPEEDRV)
  588.   Norton Utilities Version 5.0 and 6.1 (DISKREET, NCACHE)
  589.   PC-Cache (PC Tools disk cache program) (must remove before Setup)
  590.   PC-Kwik Disk-Cache Utility (Pc-kwik.exe)
  591.   PC_Kwik Disk Accelerator
  592.   PC-Kwik Version 1.59 (Pck.exe, Pskscrn.exe, Pckey.com)
  593.   PC Tools(TM) Disk-Cache Utility (Pc-cache.com)
  594.   Secretdisk II Disk-Cache Utility (Fast512.sys) (do not use with SmartDrive)
  595.   Super PC-Kwik Disk-Cache Utility (Superpck.exe)
  596.  
  597.  
  598. ANTI-VIRUS SOFTWARE
  599. ===================
  600.  
  601. Some anti-virus programs can cause problems when you run Setup. Make
  602. sure that no anti-virus programs are running while you are setting up
  603. Windows 95. If the program is a terminate-and-stay-resident program,
  604. remove any references to it in your Autoexec.bat, Config.sys, and Win.ini
  605. files.
  606.  
  607. If your BIOS has built-in virus protection, you should disable it before
  608. running Setup. To disable it, you must use the CMOS setup program for
  609. your BIOS. For more information, see the documentation that came with
  610. your computer.
  611.  
  612. See the notes for specific anti-virus programs below.
  613.  
  614. Central Point Anti-Virus Version 1.1 (Vsafe.com/Vsafe.sys)
  615. ----------------------------------------------------------
  616. To remove VSAFE, remove any lines containing Vsafe.com or Vsafe.sys
  617. from your Autoexec.bat file. Also, remove any references to Vsafe.com
  618. or Vsafe.sys from the RUN= line in your Win.ini file.
  619.  
  620. If you are upgrading to Windows 95, you must also delete all the
  621. Chklist.ms files that VSAFE has created before you run Setup. Because
  622. Windows uses the disk for memory swapping, you should turn off the
  623. Vsafe write-protection option when you run Windows 95.
  624.  
  625. If you don't remove VSAFE before you set up Windows, you will see
  626. warnings about Command.com, Win.com, and Krnl.386 when Windows starts.
  627. If you see these warnings, ignore them and choose the update option.
  628. For more information, see the Central Point Anti-Virus documentation.
  629.  
  630. F-PROT Professional
  631. -------------------
  632. Setup cannot run if F-PROT Professional is running. Remove this program
  633. from your Autoexec.bat and Config.sys files, and then check your Win.ini
  634. file for the following line:
  635.  
  636.     load=wvirstop.exe
  637.  
  638. If you see this line, remove it. When you have finished, restart your
  639. computer, and then run Setup again.
  640.  
  641. Norton Anti-Virus(R) 
  642. ---------------------
  643. If you are running any version of Norton Anti-Virus, you should remove it 
  644. before running Setup. After setup, it is recommended that you do not run
  645. Norton Anti-Virus version 1.x, 2.x, or 3.x with Windows 95. You should
  646. obtain Norton Anti-Virus for Windows 95.
  647.  
  648. To remove Norton Anti-Virus version 1.5:
  649.  
  650. 1. In your Config.sys file, remove the following line:
  651.  
  652.     device=c:\nav\nav_.sys
  653.  
  654. 2. In your Autoexec.bat file, remove C:\Nav from the PATH statement.
  655.  
  656. To remove the anti-virus features of Norton Desktop for Windows
  657. version 3.0:
  658.  
  659. 1. In your Config.sys file, remove the following line:
  660.  
  661.     device=c:\ndw\navtsr.exe
  662.  
  663. 2. In your Autoexec.bat file, remove the following lines:
  664.  
  665.     c:\ndw\image.exe
  666.     c:\ndw from the PATH statement
  667.  
  668. 3. In your System.ini file, remove the following lines:
  669.  
  670.     shell=c:\ndw\ndw.exe (in the [boot] section)
  671.     device=symevent (in the [386enh] section)
  672.  
  673. 4. In your Win.ini file, remove the following line:
  674.  
  675.     load=c:\ndw\navtsrw.exe
  676.  
  677.  
  678. USING TERMINATE-AND-STAY-RESIDENT (TSR) PROGRAMS AND DRIVERS
  679. ============================================================
  680.  
  681. APPEND (MS-DOS)
  682. ---------------
  683. Do not use the APPEND utility with Windows 95. It prevents Windows
  684. and Windows-based programs from creating valid Well-Formed-Path (WFP)
  685. names for the files they are using. (A WFP is the complete name of a
  686. file, including the drive letter and full path specification, starting
  687. from the root directory.)
  688.  
  689. Autocon Version 2.0e, Bootcon Version 1.60, and Boot.sys
  690. --------------------------------------------------------
  691. These programs enable you to select from different configurations when
  692. you start your computer. Windows 95 Setup modifies only the first
  693. section in your Config.sys and Autoexec.bat files, so you may have to
  694. modify these files manually after Setup if you want to use these
  695. programs. For more information, see the documentation that came with
  696. your program.
  697.  
  698. Cubit Version 3.01
  699. ------------------
  700. When you are using Cubit with Windows 95, do not compress the Windows
  701. System directory or any file that is loaded from your Config.sys file.
  702.  
  703. Before you upgrade to Windows 95, make sure that the earlier version of
  704. Windows is uncompressed on your hard disk. You may recompress the files
  705. after you have successfully set up Windows 95.
  706.  
  707. Doubledisk Version 2.5
  708. ----------------------
  709. Windows 95 may try to access "phantom" disk drives if you use it with
  710. Doubledisk. Phantom drives occur when you use Doubledisk to create a
  711. compressed drive. For example, if you have drives A, B, and C on your
  712. computer and you use Doubledisk to create drive F, Windows 95 and
  713. MS-DOS recognize drives D and E as valid drives, even though they do
  714. not actually exist. You can use the DRVOFF utility to prevent Windows
  715. from recognizing phantom drives. To order a copy of
  716. the DRVOFF utility, contact Vertisoft.
  717.  
  718. Infinite Disk Version 2.1
  719. -------------------------
  720. Infinite Disk version 2.1 does not work properly with Windows 95.
  721. Either remove Infinite Disk software from your computer before you run
  722. Setup, or contact your software dealer for a version of Infinite Disk
  723. software that is compatible with Windows 95.
  724.  
  725. To remove Infinite Disk from your computer:
  726. 1. Restore any compressed files back to their original state.
  727. 2. Remove the following lines from your Config.sys and Autoexec.bat 
  728.    files:
  729.  
  730.     iddrv.sys
  731.     idres.exe
  732.     protect /c
  733.  
  734. 3. Restart your computer, and then run Setup again.
  735.  
  736. NetWare(R) NetBIOS
  737. ------------------
  738. The NetWare NetBIOS TSR is incompatible with Windows 95 in many
  739. configurations. In most cases, Setup will detect NetWare NetBIOS and
  740. remove the startup command from your computer. However, if you have
  741. NetWare NetBIOS set up to start from a location other than your
  742. Autoexec.bat file (for example, from a batch file), Setup cannot
  743. detect it. In this case, you need to remove NetWare NetBIOS manually.
  744. Windows 95 includes an IPX/SPX-compatible protocol that you can use
  745. instead of NetBIOS. For information about configuring Windows 95 to
  746. work with it, see NETWORKS.TXT.
  747.  
  748. Newspace Version 1.07
  749. ---------------------
  750. This disk-compression utility is incompatible with Windows 95.
  751.  
  752. Norton Desktop for Windows (Ep.exe)
  753. -----------------------------------
  754. If the data-recovery program Erase Protect (Ep.exe) is loaded from
  755. your Autoexec.bat file, you need to disable it when you are setting up
  756. Windows, especially if you are upgrading over a previous version of
  757. Windows. Erase Protect tries to save copies of all deleted files, which
  758. can cause you to run out of disk space while running Setup.
  759.  
  760. It is recommended that you run Erase Protect with a permanent swap file. 
  761. If you are using a temporary swap file, you need to exclude files that
  762. have a .tmp or .swp extension from erase protection.
  763.  
  764. Norton Disklock Versions 3.01 and 3.5
  765. -------------------------------------
  766. Norton Disklock versions 3.01 and 3.5 do not work properly with
  767. Windows 95. Either remove this software from your computer before you
  768. run Setup, or contact Symantec product support for a version of
  769. Disklock that is compatible with Windows 95.
  770.  
  771. For information about how to remove Disklock from your computer, see
  772. the documentation that came with Norton Disklock.
  773.  
  774. PC Tools Deluxe(TM) Version 7.1 (DATAMON)
  775. -----------------------------------------
  776. If you load PC Tools DATAMON using the \SENTRY+ option, Setup may fail
  777. if you are low on disk space. Do not use the \SENTRY+ option when loading
  778. DATAMON.
  779.  
  780. Do not load DATAMON after loading SmartDrive. If DATAMON is loaded after
  781. SmartDrive, your computer may fail. See the PC Tools documentation for
  782. information about how to unload DATAMON.
  783.  
  784. PC Tools Deluxe Version 6.0 (DESKTOP)
  785. -------------------------------------
  786. If you try to start PC Tools from an MS-DOS Prompt within Windows,
  787. your computer may fail or restart itself. These problems also occur if
  788. you use MS-DOS commands from an MS-DOS Prompt within Windows.
  789.  
  790. Version 7.0 of PC Tools may correct these problems. However, do not load
  791. DESKTOP from an MS-DOS Prompt if it was loaded before starting Windows. 
  792. If you do, your computer may fail when you quit Windows. It is recommended
  793. that you run DESKTOP from its PIF, provided with Windows 95.
  794.  
  795. SUBST (MS-DOS)
  796. --------------
  797. You may encounter problems with SUBST during Setup, but you can safely
  798. add it back after Windows 95 has been installed.
  799.  
  800. UNDELETE
  801. --------
  802. If you are running UNDELETE with the SENTRY option, Setup may have
  803. problems, and there may be cases when you run out of disk space during
  804. Setup. It is recommended that you remove UNDELETE from your Config.sys
  805. and Autoexec.bat files before running Setup.
  806.  
  807. NOTE: The SENTRY option creates a hidden directory named Sentry. When
  808. you delete a file, UNDELETE moves the file from its current location to 
  809. the Sentry directory. Before removing UNDELETE from your Config.sys or
  810. Autoexec.bat file, you should free up disk space by using the
  811. UNDELETE /PURGE command on all drives.)
  812.  
  813. If you do not remove it, Setup will disable this command for you.
  814.  
  815.  
  816. KNOWN POTENTIAL SETUP PROBLEMS
  817. ==============================
  818.  
  819. Installing Windows 95 on a 4 MB or 386 computer from floppy disks may
  820. be very slow. To speed things up:
  821.  
  822. - Run Setup from inside Windows 3.x or Windows for Workgroups. Avoid
  823.   running Setup from MS-DOS.
  824.  
  825. - If you are running a disk-compression program, such as DriveSpace or
  826.   DoubleSpace, Setup may be very slow. Consider copying the files on 
  827.   the floppy disks to a temporary directory on your hard disk, and then
  828.   running Setup from your hard disk. To copy files from Disks 2 through
  829.   12, you will need to use the EXTRACT command on Disk 1 to copy the 
  830.   Win95_xx.cab files to your hard disk, since they are in the new
  831.   Microsoft Distribution Media Format (DMF). Normal MS-DOS commands like 
  832.   COPY and XCOPY won't work on these floppy disks.
  833.   
  834.   To copy a .cab file from a floppy disk to your hard disk, use the
  835.   following command:
  836.  
  837.     extract /c a:win95_xx.cab c:\<TempDir>
  838.  
  839.   where <TempDir> is the location of a temporary directory on your
  840.   hard disk.
  841.  
  842. - During Setup, if you notice that the light for an empty floppy disk 
  843.   drive is flashing for a long time and Setup is slow, try inserting a 
  844.   formatted floppy disk into the empty drive.
  845.  
  846. - If you encounter problems during Setup, such as Setup closing 
  847.   unexpectedly or error messages that do not apply, try increasing the 
  848.   size of your permanent swap file. In general, the size of your 
  849.   permanent swap file plus the amount of RAM in your computer should 
  850.   equal at least 14 MB for Setup to complete successfully. After you 
  851.   change your swap file size, try running Setup again.
  852.  
  853.   NOTE: If your hard disk is compressed, you may have to increase the 
  854.   size of your host drive before you can increase the size of your
  855.   swap file.
  856.