Programmer 7500

home *** CD-ROM | disk | FTP | other *** search

/ Programmer 7500 / MAX_PROGRAMMERS.iso / CLIPPER / MISC / CALCJNC.ZIP / MANUAL.DOC < prev next >

Wrap

Text File | 1992-05-17 | 118.4 KB | 2,808 lines

SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xabcdef │ │ │ │ Decimal : 11,259,375 │ │ Octal [o] : 52746757 │ │ Hex [x] : abcdef │ │ Binary [l] : 101010111100110111101111 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : (sin(.5)*cube(6)/pi())*(-1) │ │ │ │ Prev. Formula : (acosh(5)*tanh(.9))/(23^6) │ │ │ │ │ │ Answer : 1.109233669e-008 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ CALC_JNC James N. Cox 418 Erie Avenue Quakertown, Pa. 18951 U.S.A. CompuServe ID - 76665,3443 SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM. "This program is produced by a member of the Association of Shareware Professionals (ASP). ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a shareware-related problem with an ASP member by contacting the member directly, ASP may be able to help. The ASP Ombudsman can help you resolve a dispute or problem with an ASP member, but does not provide technical support for members' products. Please write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49442 or send a CompuServe message via CompuServe Mail to ASP Ombudsman 70007,3536." _______ ____|__ | (tm) --| | |------------------- | ____|__ | Association of | | |_| Shareware |__| o | Professionals -----| | |--------------------- |___|___| MEMBER SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM. This program has all of is functions enabled. When registration is received a PRINTED MANUAL along with the following programs will be sent to you : CALC_JNC - Registered version CALC_HEX - 22k PROGRAMMERS CALCULATOR CALC_CP - Uses math coprocessor for floating point MANUAL - Full users manual Customer support (phone,mail,email) will also be available to all registered users. If you have any problems with this SHAREWARE program please contact me via E-Mail or U.S. Mail. DEFINITION OF SHAREWARE Shareware distribution gives users a chance to try software before buying it. If you try a Shareware program and continue using it, you are expected to register. Individual programs differ on details -- some request registration while others require it, some specify a maximum trial period. With registration, you get anything from the simple right to continue using the software to an updated program with printed manual. Copyright laws apply to both Shareware and commercial software, and the copyright holder retains all rights, with a few specific exceptions as stated below. Shareware authors are accomplished programmers, just like commercial authors, and the programs are of comparable quality. (In both cases, there are good programs and bad ones!) The main difference is in the method of distribution. The author specifically grants the right to copy and distribute the software, either to all and sundry or to a specific group. For example, some authors require written permission before a commercial disk vendor may copy their Shareware. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM. Shareware is a distribution method, not a type of software. You should find software that suits your needs and pocketbook, whether it's commercial or Shareware. The Shareware system makes fitting your needs easier, because you can try before you buy. And because the overhead is low, prices are low also. Shareware has the ultimate money-back guarantee -- if you don't use the product, you don't pay for it. DISCLAIMER - AGREEMENT Users of CALC_JNC must accept this disclaimer of warranty: CALC_JNC is supplied as is. The author disclaims all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The author assumes no liability for damages, direct or conse- quential, which may result from the use of CALC_JNC." CALC_JNC is a "shareware program" and is provided at no charge to the user for evaluation. Feel free to share it with your friends, but please do not give it away altered or as part of another system. The essence of "user-supported" software is to provide personal computer users with quality software without high prices, and yet to provide incentive for programmers to continue to develop new products. If you find this program useful and find that you are using CALC_JNC and continue to use CALC_JNC after a reasonable trial period, you must make a reg- istration payment of $25.00 to James N. Cox. The $25.00 registration fee will license one copy for use on any one computer at any one time. You must treat this software just like a book. An example is that this software may be used by any number of people and may be freely moved from one computer location to another, so long as there is no possibility of it being used at one location while it's being used at another. Just as a book cannot be read by two different persons at the same time. Commercial users of CALC_JNC must register and pay for their copies of CALC_JNC within 30 days of first use or their license is withdrawn. Site-License arrangements may be made by con- tacting James N. Cox. Anyone distributing CALC_JNC for any kind of remuneration must first contact James N. Cox at the address below for authorization. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM. This authorization will be automatically granted to distributors recognized by the (ASP) as adhering to its guidelines for shareware distributors, and such distributors may begin offering CALC_JNC immediately (However James N. Cox must still be advised so that the distributor can be kept up-to-date with the latest version of CALC_JNC.). You are encouraged to pass a copy of CALC_JNC along to your friends for evaluation. Please encourage them to register their copy if they find that they can use it. All registered users will receive a copy of the latest version of the CALC_JNC system. James N. Cox 418 Erie Avenue Quakertown, Pa. 18951 U.S.A CIS# 76665,3443 SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM. TABLE OF CONTENTS ─────────────────── Introduction ──────────────────────> Page 1 Installation ──────────────────────> Page 2 Command Line Options ──────────────> Page 3 Memory Requirements ───────────────> Page 2 Loading CALC_JNC as a TSR ─────────> Page 2,3 Removing CALC_JNC from memory ─────> Page 2 Clearing the Entry Line ───────────> Page 4 Deleting Last Character Entered ───> Page 4 Obtaining Result of a Calculation ─> Page 4 Positioning CALC_JNC on the screen─> Page 4 Sending data to an application ────> Page 5 Programmers Calculator ────────────> Page 6 ────────────────────── Entry Modes ─────────── Decimal ───────────────────────> Page 7 Hexadecimal ───────────────────> Page 8 Octal ─────────────────────────> Page 7 Binary ────────────────────────> Page 8 Positive Only ─────────────────> Page 9 Changing Default Entry Modes ──> Page 7,8 Functions ───────── Addition ──────────────────────> Page 10 Subtraction ───────────────────> Page 10 Multiplication ────────────────> Page 11 Division ──────────────────────> Page 11 Modulus ───────────────────────> Page 12 Negation ──────────────────────> Page 12 Or ────────────────────────────> Page 13 Xor ───────────────────────────> Page 13 Nor ───────────────────────────> Page 14 And ───────────────────────────> Page 14 Nand ──────────────────────────> Page 15 Not ───────────────────────────> Page 15 Memories ──────── Storing ───────────────────────> Page 16 Recalling ─────────────────────> Page 16 SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM. Float Calculator ──────────────────> Page 17 ──────────────── Functions ───────── Addition ──────────────────────> Page 18 Subtraction ───────────────────> Page 18 Multiplication ────────────────> Page 19 Division ──────────────────────> Page 19 Square Root ───────────────────> Page 20 Cube Root ─────────────────────> Page 20 Xth Root of Y ─────────────────> Page 21 X Power Y ─────────────────────> Page 21 Reciprocal ────────────────────> Page 22 Fraction ──────────────────────> Page 22 Factorial ─────────────────────> Page 23 Absolute Value ────────────────> Page 23 Integer ───────────────────────> Page 24 Engineering ───────────────────> Page 24 Sexagesimal ───────────────────> Page 25 Cosine ────────────────────────> Page 26 Sine ──────────────────────────> Page 26 Tangent ───────────────────────> Page 27 Arc-Cosine ────────────────────> Page 27 Arc-Sine ──────────────────────> Page 28 Arc-Tangent ───────────────────> Page 28 Hyperbolic Cosine ─────────────> Page 29 Hyperbolic Sine ───────────────> Page 29 Hyperbolic Tangent ────────────> Page 30 Inverse Hyperbolic Cosine ─────> Page 30 Inverse Hyperbolic Sine ───────> Page 31 Inverse Hyperbolic Tangent ────> Page 31 Natural Logarithm ─────────────> Page 32 Common Logarithm ──────────────> Page 32 Anti-Natural Logarithm ────────> Page 33 Pi ────────────────────────────> Page 33 Entering Negative Values ──────> Page 34 Fixed Decimal Place ───────────> Page 34 Memories ──────── Storing ───────────────────────> Page 35 Recalling ─────────────────────> Page 36 Recalling Previous Formulas ───> Page 37 Recalling Previous Result ─────> Page 37 Changing Colors ─────────────── Background ────────────────────> Page 38 Foreground ────────────────────> Page 38 SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM. Help Screens ───────────────────────> Page 39,40 Compatible Video Monitors ──────────> Page 41 Graphics Screens ───────────────────> Page 41 Text Modes ─────────────────────────> Page 41 Tables ────── Color Table ──────────────────> Appendix A1 Programmers Functions Table ──> Appendix A2 Float Functions Table ────────> Appendix A3 Specifications ────────────── Precedence ───────────────────> Appendix B1 Maximum Ranges ───────────────> Appendix B2 Errors ────── Definitions ──────────────────> Appendix C1 CAN'T FIND REGISTER.FRM ─────────────────────── REGISTRATION FORM ──────────────> Appendix D1 SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 1 Thank you for taking the time to evaluate CALC_JNC. CALC_JNC is divided into two seperate calculators. The PROGRAMMERS CALCULATOR is designed to give automatic conversions between DECIMAL,HEXADECIMAL,OCTAL and BINARY. Also included are the following operations : ADDITION,SUBTRACTION,MULTIPLICATION,DIVISION,MODULUS, OR,XOR,AND,NAND,NOR,NOT and NEGATION. 10 memories are also included. The FLOAT CALCULATOR is designed to allow for easy entry of formulas. Included in the FLOAT CALCULATOR are the following operations : ADDITION,SUBTRACTION,MULTIPLICATION,DIVISION,15 LEVELS OF PARENTHESIS,POWER,SQUARE ROOT,Xth ROOT OF Y,RECIPROCAL, ABSOLUTE VALUE,SINE,COSINE,TANGENT,HYPERBOLIC SINE, HYPERBOLIC COSINE,HYPERBOLIC TANGENT,ARC-SINE,ARC-COSINE, ARC-TANGENT,NATURAL LOGARITHM,ANTI-NATURAL LOGARITHM, COMMON LOGARITHM,INTEGER,FACTORIAL,CUBE ROOT,10 MEMORIES, RECALL LAST 10 FORMULAS ENTERED and CHANGE BACKGROUND AND FOREGROUND COLORS,FIXED DECIMAL POINT. Both calculators have the ability to send the result to the keyboard buffer and work with 80-132 column displays. CALC_JNC has been tested on the following version's of DOS. 3.1 to 5.0 CALC_JNC has also been tested on the following processors. 8086 to the 80486 At the command line type : CALC_JNC /? <-- this will display all options available CALC_JNC can also be loaded into memory as a TSR. REGISTRATION IS REQUIRED if you use this program for more than thirty days. You will receive a PRINTED MANUAL along with the following programs upon registration : CALC_JNC - Registered version CALC_HEX - 22k PROGRAMMERS CALCULATOR CALC_CP - Uses math coprocessor for floating point MANUAL.DOC - Full Manual PLEASE USE THE REGISTER.FRM FILE PROVIDED WITH THIS PROGRAM. CALC_JNC Copyright 1991,1992 James N. Cox All Rights Reserved. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 2 INSTALLATION ──────────── To install CALC_JNC on your hard disk. 1) Install the floppy in drive A. 2) Type COPY A:C*.* C:\whatever your directory name is. To run CALC_JNC from the command line simply type CALC_JNC < you may enter other options here > To load CALC_JNC as a TSR type CALC_JNC /r < you may enter other options here > To remove CALC_JNC from memory type CALC_JNC /d When CALC_JNC is first executed the PROGRAMMERS CALCULATOR is the first calculator that appears. To change to the FLOAT CALCULATOR enter ALT-F. To change back again enter ALT-F again. Memory Requirements ─────────────────── The memory requirements are as follows : CALC_JNC.EXE ───────────> 51.4k SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 3 COMMAND LINE OPTIONS ──────────────────── usage : calc {/r} {/bn} {/fn} {/hn} {/i} {/d} {/x} {/pn} {/?} PARAMETER DEFINITION ───────── ─────────────────────────────────────────── /r ─────────────> Load CALC_JNC as a TSR. /bn ─────────────> Set the background color. (see color table) Range : n <= 15. /fn ─────────────> Set the foreground color. (see color table) Range : n <= 15. /hn ─────────────> Define a new hot key to activate CALC_JNC when loaded as a TSR. Range : n = any key. /i ─────────────> Information about the program. /x ─────────────> Use the float calculator as the default. /pn ─────────────> Set the fixed decimal point to the default value of n. Range : 0 <= n <= 9 /d ─────────────> Remove CALC_JNC from memory. /? ─────────────> Show options. The above options except for /i and /? are only valid the first time calc is loaded as a TSR. If CALC_JNC is not loaded as a TSR then the command line options are always valid. When CALC_JNC is loaded as a TSR, CALC_JNC will display that it has been loaded into memory, and what hot key is to be used to activate CALC_JNC. Example: CALC_JNC /r /h0 <return> The above loads CALC_JNC as a TSR and defines the hot key as ALT-0. The message that follows will then be displayed. CALC_JNC LOADED IN MEMORY. ALT-0 TO ACTIVATE. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 4 CLEARING THE ENTRY LINE ─────────────────────── To clear the calculator to start a new calculation the key is the TAB key. This key is also used to clear any errors that may have occurred. DELETING THE LAST CHARACTER ENTERED ─────────────────────────────────── To delete the last character entered, the key is the BACKSPACE key. This key can be used at any time to delete the last character entered. OBTAINING THE RESULT OF A CALCULATION ───────────────────────────────────── To obtain the result from a calculation, the key is the ENTER key. Press this key after a calculation has been entered to obtain the result of the calculation. POSITIONING CALC_JNC ON THE SCREEN ────────────────────────────────── To move CALC_JNC to another location on the screen the following options are available anytime the calculator is on the screen. ALT-1 -> will move CALC_JNC up one line. ALT-2 -> will move CALC_JNC down one line. ALT-3 -> will move CALC_JNC to the left. ALT-4 -> will move CALC_JNC to the right. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 5 SENDING DATA TO THE KEYBOARD BUFFER ─────────────────────────────────── CALC_JNC can send the result of a calculation to the current application that is running in the background. The command is ALT-K. This command can be used at anytime. (if the result is 0, it will still be sent to the application) If the result is greater than 16 characters, CALC_JNC will only send the first 16 characters. PROGRAMMERS CALCULATOR ────────────────────── CALC_JNC can send one of the following results to the keyboard buffer depending on what the default entry mode is set for (ALT-T). If the default entry mode is decimal, the result sent to the application is decimal(cursor = '_'). If the default entry mode is set for hexadecimal, the result sent to the application is hexadecimal(cursor = 'x'). If the default entry mode is set for octal, the result sent to the application is octal(cursor = 'o'). If the default entry mode is set for binary, the result sent to the application is binary(cursor = 'l'). FLOAT CALCULATOR ──────────────── If the result has an exponent value, the most significant digit will be drop following the sign. After CALC_JNC sends the data to the keyboard buffer, CALC_JNC will go to sleep and return control back to the application. Results can only be sent to the application if CALC_JNC is loaded into memory as a TSR. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 6 P R O G R A M M E R S C A L C U L A T O R ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : 12345678 │ │ │ │ Decimal : 12,345,678 │ │ Octal [o] : 57060516 │ │ Hex [x] : bc614e │ │ Binary [l] : 101111000110000101001110 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 7 The default entry mode for the PROGRAMMERS CALCULATOR is decimal. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : 12345678 <this is what you type> │ │ │ │ Decimal : 12,345,678 │ │ Octal [o] : 57060516 │ │ Hex [x] : bc614e │ │ Binary [l] : 101111000110000101001110 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ The default entry mode can be changed by preceding the entry line value with one of the following characters : o - Octal x - Hexadecimal l - Binary Example (Octal Entry) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : o1234567 <this is what you type> │ │ │ │ Decimal : 342,391 │ │ Octal [o] : 1234567 │ │ Hex [x] : 53977 │ │ Binary [l] : 1010011100101110111 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 8 Example (Hexadecimal Entry) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xfecdef <this is what you type> │ │ │ │ Decimal : 16,698,863 │ │ Octal [o] : 77546757 │ │ Hex [x] : fecdef │ │ Binary [l] : 111111101100110111101111 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ Example (Binary Entry) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : l1001010101111011 <this is what you type> │ │ │ │ Decimal : 38,267 │ │ Octal [o] : 112573 │ │ Hex [x] : 957b │ │ Binary [l] : 1001010101111011 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ If you wish to change the default entry mode for all calculations and not enter the preceding character, press ALT-T to toggle the default entry mode. The cursor will change to one of the three characters above for each time ALT-T is entered. Note : If the default entry mode is not decimal (cursor is not an underscore) decimal values cannot be entered. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 9 To allow for only positive numbers from 0 to 4,294,967,295 the command is ALT-P. To switch back to positive and negative numbers enter ALT-P again. Example (Prior to ALT-P): ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xffffffff │ │ │ │ Decimal : -1 │ │ Octal [o] : 37777777777 │ │ Hex [x] : ffffffff │ │ Binary [l] : 11111111111111111111111111111111 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ Example (After ALT-P): ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xffffffff │ │ │ │ Decimal : 4,294,967,295 │ │ Octal [o] : 37777777777 │ │ Hex [x] : ffffffff │ │ Binary [l] : 11111111111111111111111111111111 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 10 ADDITION ──────── The key for addition is the '+' key. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : 500 <+> 1000 <enter> │ │ │ │ Decimal : 1,500 │ │ Octal [o] : 2734 │ │ Hex [x] : 5dc │ │ Binary [l] : 10111011100 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SUBTRACTION ─────────── The key for subtraction is the '-' key. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : o456 <-> 200 <enter> │ │ │ │ Decimal : 102 │ │ Octal [o] : 146 │ │ Hex [x] : 66 │ │ Binary [l] : 1100110 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 11 MULTIPLICATION ────────────── The key for multiplication is the '*' key. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : 912 <*> xff <enter> │ │ │ │ Decimal : 232,560 │ │ Octal [o] : 706160 │ │ Hex [x] : 38c70 │ │ Binary [l] : 111000110001110000 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ DIVISION ──────── The key for division is the '/' key. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xeabc </> l000111 <enter> │ │ │ │ Decimal : 8,584 │ │ Octal [o] : 20610 │ │ Hex [x] : 2188 │ │ Binary [l] : 10000110001000 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 12 MODULUS ─────── The key for modulus is the '%' key. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : 10 <%> 8 <enter> │ │ │ │ Decimal : 2 │ │ Octal [o] : 2 │ │ Hex [x] : 2 │ │ Binary [l] : 10 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ NEGATION ──────── The negation key is ALT-E. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xff <ALT-E> <enter> │ │ │ │ Decimal : -255 │ │ Octal [o] : 37777777401 │ │ Hex [x] : ffffff01 │ │ Binary [l] : 11111111111111111111111100000001 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 13 OR ── The OR key is ALT-O. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xa0 <ALT-O> xf05 <enter> │ │ │ │ Decimal : 4,005 │ │ Octal [o] : 7645 │ │ Hex [x] : fa5 │ │ Binary [l] : 111110100101 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ XOR ─── The Exclusive─Or key is ALT-X. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : 3000 <ALT-X> l1010 <enter> │ │ │ │ Decimal : 2,994 │ │ Octal [o] : 5662 │ │ Hex [x] : bb2 │ │ Binary [l] : 101110110010 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 14 NOR ─── The Nor key is ALT-R. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : o777 <ALT-R> xff <enter> │ │ │ │ Decimal : -512 │ │ Octal [o] : 37777777000 │ │ Hex [x] : fffffe00 │ │ Binary [l] : 11111111111111111111111000000000 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ AND ─── The And key is ALT-A. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xc0 <ALT-A> x60 <enter> │ │ │ │ Decimal : 64 │ │ Octal [o] : 100 │ │ Hex [x] : 40 │ │ Binary [l] : 1000000 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 15 NAND ──── The Nand key is ALT-D. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : o5432 <ALT-D> xea00 <enter> │ │ │ │ Decimal : -2,561 │ │ Octal [o] : 37777772777 │ │ Hex [x] : fffff5ff │ │ Binary [l] : 11111111111111111111010111111111 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ NOT ─── The Not key is ALT-N. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : xff <ALT-N> <enter> │ │ │ │ Decimal : -256 │ │ Octal [o] : 37777777400 │ │ Hex [x] : ffffff00 │ │ Binary [l] : 11111111111111111111111100000000 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 16 STORING RESULT IN MEMORY ──────────────────────── To save the result in memory, the command is ALT-S. There are a total of 10 memories that can be utilized. After ALT-S is pressed enter a number from 0 to 9 to tell CALC_JNC where to store the result. Example (store result in memory location 1) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : 123456 <+> 123 <enter> <ALT-S> <1> │ │ │ │ Decimal : 123579 │ │ Octal [o] : 361273 │ │ Hex [x] : 1e2bb │ │ Binary [l] : 11110001010111011 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ RECALLING A RESULT FROM MEMORY ────────────────────────────── To recall a result from memory the command is ALT-L. After ALT-L is pressed, enter a number from 0 to 9 to tell CALC_JNC which memory location you are recalling. Example (recall result from memory location 1) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ + - * / % Not And nanD Or Xor noR nEg │ │ Entry Line : <ALT-L> <1> 123579 <this value is recalled> │ │ │ │ Decimal : 123579 │ │ Octal [o] : 361273 │ │ Hex [x] : 1e2bb │ │ Binary [l] : 11110001010111011 │ │ │ │ Store / recaLL ALT-F->Float ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 17 F L O A T C A L C U L A T O R ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : sqr(45)*cube(45)/cos(.5) │ │ │ │ Prev. Formula : cos(4)*sin(45/8) │ │ │ │ │ │ Answer : 9.777837572e-002 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 18 ADDITION ──────── To obtain the sum of two numbers, the command is x+y where : x is any number or expression y is any number or expression Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 10+30+40 <enter> │ │ │ │ Prev. Formula : 10+30+40 │ │ │ │ │ │ Answer : 80 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SUBTRACTION ─────────── To obtain the difference of two numbers, the command is x-y where : x is any number or expression y is any number or expression Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 125-30.24-40 <enter> │ │ │ │ Prev. Formula : 125-30.24-40 │ │ │ │ │ │ Answer : 54.76 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 19 MULTIPLICATION ────────────── To multiply two numbers, the command is x*y where : x is any number or expression y is any number or expression Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 75*900*(-1) <enter> │ │ │ │ Prev. Formula : 75*900*(-1) │ │ │ │ │ │ Answer : -67500 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ DIVISION ──────── To divide two numbers, the command is x/y where : x is any number or expression y is any number or expression Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 345/sqr(4) <enter> │ │ │ │ Prev. Formula : 345/sqr(4) │ │ │ │ │ │ Answer : 172.5 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 20 SQUARE ROOT ─────────── To obtain the square root of a number, the command is sqr(arg) where : arg is any positive number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : sqr(2) <enter> │ │ │ │ Prev. Formula : sqr(2) │ │ │ │ │ │ Answer : 1.414213562 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ CUBE ROOT ───────── To obtain the cube root of a number, the command is cube(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : cube(27) <enter> │ │ │ │ Prev. Formula : cube(27) │ │ │ │ │ │ Answer : 3 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 21 Xth ROOT of Y ───────────── To obtain the xth root of y, the command is (x,y) where : x is any number or expression y is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : (64,2) <enter> │ │ │ │ Prev. Formula : (64,2) │ │ │ │ │ │ Answer : 1.010889286 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ X Power Y ───────── To raise x to the power of y, the command is (x^y) where : x is any number or expression y is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : (4^45) <enter> │ │ │ │ Prev. Formula : (4^45) │ │ │ │ │ │ Answer : 1.237940039e+027 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 22 RECIPROCAL ────────── To obtain the reciprocal of a number, the command is (arg)] where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : (500)] <enter> │ │ │ │ Prev. Formula : (500)] │ │ │ │ │ │ Answer : 2.e-003 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ FRACTION ──────── To obtain the fraction of a number, the command is frac(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : frac(34.987) <enter> │ │ │ │ Prev. Formula : frac(34.987) │ │ │ │ │ │ Answer : 0.987 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 23 FACTORIAL ───────── To obtain the factorial of a number, the command is fact(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : fact(sqr(5)) <enter> │ │ │ │ Prev. Formula : fact(sqr(5)) │ │ │ │ │ │ Answer : 2 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ ABSOLUTE VALUE ────────────── To obtain the absolute value of a number, the command is abs(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : abs(100.34*(-1)*10) <enter> │ │ │ │ Prev. Formula : abs(100.34*(-1)*10) │ │ │ │ │ │ Answer : 1003.4 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 24 INTEGER ─────── To obtain the integer value of a number, the command is int(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : int(123.09876) <enter> │ │ │ │ Prev. Formula : int(123.09876) │ │ │ │ │ │ Answer : 123 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ ENGINEERING ─────────── To enter a number in engineering format, the command is xe+-y where : x is any number or expression y is any number from 0 to 302. the sign must follow the e and can be either + or - Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : (123e+20)*sqr(23) <enter> │ │ │ │ Prev. Formula : (123e+20)*sqr(23) │ │ │ │ │ │ Answer : 5.898872774e+022 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 25 SEXAGESIMAL ─────────── To convert a decimal number to it's sexagesimal value, the command is ALT-S where : this command converts the value on the ANSWER line to it's sexagesimal value To convert a number from sexagesimal back to decimal, the command is ALT-S where : this command is a toggle that will switch each time from decimal to sexagesimal ANSWER's Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 12.456789 <enter> <ALT-S> │ │ │ │ Prev. Formula : 12.456789 │ │ │ │ │ │ Answer : 12°27'24.44" │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ To enter a value in sexagesimal form, the command is hours:minutes:seconds where : this command can be used at any time and also embedded within formulas Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 10:36:58 <enter> │ │ │ │ Prev. Formula : 10:36:58 │ │ │ │ │ │ Answer : 10.61611114 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 26 COSINE ────── To obtain the cosine of a number, the command is cos(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : cos(24*5) <enter> │ │ │ │ Prev. Formula : cos(24*5) │ │ │ │ │ │ Answer : -0.5000000007 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SINE ──── To obtain the sine of a number, the command is sin(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : sin(64:43:42) <enter> │ │ │ │ Prev. Formula : sin(64:43:42) │ │ │ │ │ │ Answer : 0.9042937722 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 27 TANGENT ─────── To obtain the tangent of a number, the command is tan(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : tan(44) <enter> │ │ │ │ Prev. Formula : tan(44) │ │ │ │ │ │ Answer : 0.9656887751 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ ARC-COSINE ────────── To obtain the arc-cosine of a number, the command is acos(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : acos(6/10) <enter> │ │ │ │ Prev. Formula : acos(6/10) │ │ │ │ │ │ Answer : 53.13010234 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 28 ARC-SINE ──────── To obtain the arc-sine of a number, the command is asin(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : asin(20*.0001) <enter> │ │ │ │ Prev. Formula : asin(20*.0001) │ │ │ │ │ │ Answer : 0.1145916354 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ ARC-TANGENT ─────────── To obtain the arc-tangent of a number, the command is atan(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : atan(5) <enter> │ │ │ │ Prev. Formula : atan(5) │ │ │ │ │ │ Answer : 78.69006751 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 29 HYPERBOLIC COSINE ───────────────── To obtain the hyperbolic cosine of a number, the command is cosh(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : cosh(1.23) <enter> │ │ │ │ Prev. Formula : cosh(1.23) │ │ │ │ │ │ Answer : 1.856761057 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ HYPERBOLIC SINE ─────────────── To obtain the hyperbolic sine of a number, the command is sinh(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : sinh(2.4) <enter> │ │ │ │ Prev. Formula : sinh(2.4) │ │ │ │ │ │ Answer : 5.466229214 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 30 HYPERBOLIC TANGENT ────────────────── To obtain the hyperbolic tangent of a number, the command is tanh(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : tanh(3.4) <enter> │ │ │ │ Prev. Formula : tanh(3.4) │ │ │ │ │ │ Answer : 0.9977749279 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ INVERSE HYPERBOLIC COSINE ───────────────────────── To obtain the inverse hyperbolic cosine of a number, the command is acosh(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : acosh(20/15) <enter> │ │ │ │ Prev. Formula : acosh(20/15) │ │ │ │ │ │ Answer : 0.7953654612 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 31 INVERSE HYPERBOLIC SINE ─────────────────────── To obtain the inverse hyperbolic sine of a number, the command is asinh(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : asinh(20.45*.234) <enter> │ │ │ │ Prev. Formula : asinh(20.45*.234) │ │ │ │ │ │ Answer : 2.269438791 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ INVERSE HYPERBOLIC TANGENT ────────────────────────── To obtain the inverse hyperbolic tangent of a number, the command is atanh(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : atanh(.5) <enter> │ │ │ │ Prev. Formula : atanh(.5) │ │ │ │ │ │ Answer : 0.5493061443 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 32 NATURAL LOGARITHM ───────────────── To obtain the natural logarithm of a number, the command is ln(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : ln(45*2) <enter> │ │ │ │ Prev. Formula : ln(45*2) │ │ │ │ │ │ Answer : 4.49980967 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ COMMON LOGARITHM ──────────────── To obtain the common logarithm of a number, the command is log(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : log(123) <enter> │ │ │ │ Prev. Formula : log(123) │ │ │ │ │ │ Answer : 2.089905111 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 33 ANTI-NATURAL LOGARITHM ────────────────────── To obtain the anti-natural logarithm of a number, the command is exp(arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : exp(4.5) <enter> │ │ │ │ Prev. Formula : exp(4.5) │ │ │ │ │ │ Answer : 90.0171313 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ PI ── To obtain the value of pi, the command is pi() where : pi = 3.141592654 Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : pi()*sqr(2) <enter> │ │ │ │ Prev. Formula : pi()*sqr(2) │ │ │ │ │ │ Answer : 4.442882938 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 34 ENTERING NEGATIVE NUMBERS ───────────────────────── To enter a negative number, the command is (-arg) where : arg is any number or expression Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 10*(-1)/(-45) <enter> │ │ │ │ Prev. Formula : 10*(-1)/(-45) │ │ │ │ │ │ Answer : 0.2222222222 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ FIXED DECIMAL PLACE ─────────────────── To fix the number of decimal places to be displayed, the command is fix(arg) where : arg is a number from 0 to 9 if arg is a 0 then fixed decimal point is disabled Parenthesis are required for this function Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : fix(2) <enter> │ │ │ │ Prev. Formula : fix(2) │ │ │ │ │ │ Answer : 0.00 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 35 STORING THE RESULT IN MEMORY ──────────────────────────── To store the result in memory, the command is +sav(arg) where : arg is a number from 0 to 9 Parenthesis are required for this operation Example (store result of calculation in memory location 1) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 10+30+40+sav(1) <enter> │ │ │ │ Prev. Formula : 10+30+40+sav(1) │ │ │ │ │ │ Answer : 80 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ Example (store answer in memory location 2) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : <ALT-P> +sav(2) <enter> │ │ │ │ Prev. Formula : 80+sav(2) │ │ │ │ │ │ Answer : 80 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ Example (store result of first half of calculation in loc. 3) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 123+456+sav(3)+23+56 <enter> │ │ │ │ Prev. Formula : 123+456+sav(3)+23+56 │ │ │ │ │ │ Answer : 658 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 36 RECALLING A RESULT FROM MEMORY ────────────────────────────── To recall a result from memory, the command is rec(arg) where : arg is a number from 0 to 9 Parenthesis are required for this function Example (recall the result from memory location 3) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : rec(3) <enter> │ │ │ │ Prev. Formula : rec(3) │ │ │ │ │ │ Answer : 579 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ Example (recall the result from memory location 2 and 1) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : 100*rec(1)+rec(2)*2 │ │ │ │ Prev. Formula : 100*rec(1)+rec(2)*2 │ │ │ │ │ │ Answer : 8160 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 37 RECALLING A PREVIOUS CALCULATION ──────────────────────────────── To recall a previous calculation the command is ALT-D. This command will allow you to scroll back through the last 10 formulas entered. To scroll forward through the last 10 formulas the command is ALT-U. PUTTING THE ANSWER ON THE ENTRY LINE ──────────────────────────────────── To continue with calculations, the command is ALT-P. This command will put the ANSWER on the ENTRY LINE to allow for the continuation of calculations. Example : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : <ALT-P> 1234.56 │ │ │ │ Prev. Formula : 1234.56 │ │ │ │ │ │ Answer : 1234.56 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 38 SETTING THE BACKGROUND COLOR ──────────────────────────── To set the background color the command is back(arg) where : arg is a number from 0 to 15 from the color table. Example (set background color to blue) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : back(1) <enter> │ │ │ │ Prev. Formula : 0 │ │ │ │ │ │ Answer : 0 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SETTING THE FOREGROUND COLOR ──────────────────────────── To set the foreground color the command is fore(arg) where : arg is a number from 0 to 15 from the color table. Example (set foreground color to white) : ┌───────────────────────────────────────────────────────────┐ │ CALC_JNC ver 9.01 Programmers Calculator 05/17/92 │ │ Float Mode │ │ │ │ Enter Formula : fore(15) <enter> │ │ │ │ Prev. Formula : 0 │ │ │ │ │ │ Answer : 0 │ │ ALT-F->Prog ALT-H->Help ESC->Exit │ │ Copyr(c) James N. Cox 1991,1992. All Rights Reserved. │ └───────────────────────────────────────────────────────────┘ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 39 HELP SCREENS ──────────── The help screens can be displayed at any time. The command is ALT-H. Pressing ALT-H again will display the next help screen. The help screens that are displayed are as follows. ╔══════════════════════════════════════════════════════════════════════════════╗ ╟────────────────────── P R O G R A M M E R S M O D E ───────────────────────╢ ║ALT-N --> Not. ALT-R --> noR. ║ ║ALT-A --> And. ALT-E --> nEgation. ║ ║ALT-D --> nanD. ALT-P --> toggle Positive only mode on/off. ║ ║ALT-O --> Or. ALT-T --> toggle defaulT entry mode. ║ ║ALT-X --> eXclusive-or. ║ ║ALT-S --> Save the result in the memory location that follows. [0..9]. ║ ║ALT-L --> recaLL the result from the memory location that follows. [0..9]. ║ ╟─────────────────────────── F L O A T M O D E ──────────────────────────────╢ ║sqr(n) --> square root. x,y --> xth root of y. pi() --> 3.141592654. ║ ║(n)] --> reciprocal. cube(n) --> cube root. frac(n) --> fraction. ║ ║fact(n) --> factorial. abs(n) --> absolute. int(n) --> integer. ║ ║sin(n) --> sine. cos(n) --> cosine. tan(n) --> tangent. ║ ║asin(n) --> arc-sine. acos(n) --> arc-cosine. atan(n) --> arc-tangent. ║ ║sinh(n) --> hyp-sine. cosh(n) --> hyp-cosine. tanh(n) --> hyp-tangent. ║ ║asinh(n)--> inv-hyp sin. acosh(n)--> inv-hyp cos. atanh(n)--> inv-hyp tan. ║ ║exp(n) --> anti-natural logarithm. ║ ║log(n) --> common logarithm. ln(n) --> natural logarithm. ║ ║fore(n) --> set foreground color. back(n) --> set bacground color. ║ ║+sav(n) --> save result to the left in memory location n. [0..9] ║ ║rec(n) --> recall the result stored in memory location n. [0..9] ║ ╟──────────────────────────────────────────────────────────────────────────────╢ ║ALT-H --> Continue ALT-Q --> Return to CALC_JNC ESC --> Exit CALC_JNC ║ ╚══════════════════════════════════════════════════════════════════════════════╝ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 40 HELP SCREENS (cont) ─────────────────── ╔══════════════════════════════════════════════════════════════════════════════╗ ╟─────────────────────────── F L O A T M O D E (cont) ──────────────────────╢ ║hrs:mins:secs --> sexagesimal input. ║ ║ALT-S --> convert result to sexagesimal. ║ ║ALT-P --> recall Previous result. fix(n) --> set fixed dec. [0..9] ║ ║ALT-D --> step backwarDs through previous formulas entered. [0..9] ║ ║ALT-U --> step forwards through previous formulas entered. [0..9] ║ ╟─────────── P R O G R A M M E R S A N D F L O A T M O D E ──────────────╢ ║ALT-F --> toggle between both the PROGRAMMERS and FLOAT calculators. ║ ║TAB --> clear the calculator buffer. BACKSPACE --> delete character. ║ ║ALT-1 --> move calculator display up one row. ESC --> exit CALC_JNC. ║ ║ALT-2 --> move calculator display down one row. ║ ║ALT-3 --> move calculator display to the left one column. ║ ║ALT-4 --> move calculator display to the right one column. ║ ║ALT-K --> send the current result to the applications keyboard buffer. (PASTE)║ ╟─────────────────── C O M M A N D L I N E O P T I O N S ──────────────────╢ ║/? --> display options. /I --> program information. ║ ║/Hn --> set hotkey=n. /X --> use FLOAT calc as default. ║ ║/R --> load CALC_JNC as a TSR. /D --> remove CALC_JNC from memory.║ ║/Pn --> set fixed number of decimal places. n=[0..9] ║ ║/Bn --> background color. n=[0..15] /Fn --> foreground color. n=[0..15] ║ ║ ╢ ╟──────────────────────────────────────────────────────────────────────────────╢ ║ALT-H --> Continue ALT-Q --> Return to CALC_JNC ESC --> Exit CALC_JNC ║ ╚══════════════════════════════════════════════════════════════════════════════╝ SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page 41 COMPATIBLE VIDEO MONITORS ───────────────────────── CALC_JNC has been tested on the following video monitors. MONOCHROME CGA EGA VGA SVGA GRAPHICS SCREENS ──────────────── CALC_JNC will not attempt to pop up on top of a graphics screen. TEXT MODES ────────── CALC_JNC will work with 80-132 column text modes. If the video mode is changed after CALC_JNC has been loaded into memory, CALC_JNC will sense the change and configure itself accordingly. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page A1 COLOR TABLE ───────────── Value Color ───── ───── * 0 ──────────────────────> Black 1 ──────────────────────> Blue 2 ──────────────────────> Green 3 ──────────────────────> Cyan 4 ──────────────────────> Red 5 ──────────────────────> Magenta 6 ──────────────────────> Brown * 7 ──────────────────────> Light Gray 8 ──────────────────────> Dark Gray 9 ──────────────────────> Light Blue 10 ──────────────────────> Light Green 11 ──────────────────────> Light Cyan 12 ──────────────────────> Light Red 13 ──────────────────────> Light Magenta 14 ──────────────────────> Light Yellow * 15 ──────────────────────> White * - These are the only colors available if a monochrome adapter or a monochrome monitor is used. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page A2 PROGRAMMERS CALCULATOR ──────────────────────── Programmers Functions ─────────────────────── + : Addition ─ : Subtraction * : Multiplication / : Division % : Modulus ALT-D : Nand ALT-A : And ALT-O : Or ALT-X : Exclusive-Or ALT-R : Nor ALT-N : Not ALT-E : Negation ALT-S : Store result in memory location that follows. ALT-L : Recall the value stored in the location follows. ALT-F : Switch to the FLOAT CALCULATOR. ALT-K : Send result to keyboard buffer ALT-H : Help screens. ALT-1 : Move CALC_JNC up one line. ALT-2 : Move CALC_JNC down one line. ALT-3 : Move CALC_JNC to the left. ALT-4 : Move CALC_JNC to the right. TAB : Clear entry line. BACKSPACE : Delete last character entered. ESC : Exit Calc and return to the application. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page A3 FLOAT CALCULATOR ────────────────── Float Functions ───────────────── + : Perform addition. - : Perform subtraction. * : Perform multiplication. / : Perform division. () : Parenthesis. Max depth of 15. x ^ y : x raised to the power of y x , y : Obtain the xth root of x. x ] : Obtain the reciprocal of x. sqr(arg) : Perform square root on arg. abs(arg) : Get the absolute value of arg. sin(arg) : Perform sine function on arg. cos(arg) : Perform cosine function on arg. tan(arg) : Perform tangent function on arg. sinh(arg) : Perform the hyperbolic sine of arg. cosh(arg) : Perform the hyperbolic cosine of arg. tanh(arg) : Perform the hyperbolic tangent of arg. asin(arg) : Perform the arc sine of arg. acos(arg) : Perform the arc cosine of arg. atan(arg) : Perform the arc tangent of arg. ln(arg) : Perform the natural logarithm of arg. log(arg) : Perform the common logarithm of arg. exp(arg) : Perform the anti-natural logarithm of arg. int(arg) : Convert arg to an integer. frac(arg) : Get the fraction of arg. fact(arg) : Get the factorial of arg. cube(arg) : Get the cube root of arg. sav(arg) : Save the result to the left of the function in arg. This function may be put into a formula in any place. Range : 0 to 9 memories. rec(arg) : Recall memory at location arg. This function may be put into a formula in any place. Range : 0 to 9 memories. back(arg) : Define the background color. fore(arg) : Define the foreground color. ALT-P : Put the previous result on the entry line. ALT-D : Recall the previous formula entered. ALT-U : Recall the next formula entered. (use in conjunction with ALT-D) ALT-F : Switch to the PROGRAMMERS CALCULATOR. ALT-K : Send result to keyboard buffer ALT-1 : Move CALC_JNC up one line. ALT-2 : Move CALC_JNC down one line. ALT-3 : Move CALC_JNC to the left. ALT-4 : Move CALC_JNC to the right. ALT-H : Help screens. TAB : Clear entry line. BACKSPACE : Delete last character entered. ESC : Exit CALC_JNC and return to the application. SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page B1 PRECEDENCE ──────────── 1 - Highest Priority, 5 - Lowest Priority FUNCTION PRECEDENCE ──────── ────────── + ───────────────────────────> 5 - ───────────────────────────> 5 * ───────────────────────────> 4 / ───────────────────────────> 4 () ───────────────────────────> 1 x ^ y ────────────────────────> 2 x , y ────────────────────────> 2 x ] ──────────────────────────> 2 sqr(arg) ─────────────────────> 3 abs(arg) ─────────────────────> 3 sin(arg) ─────────────────────> 3 cos(arg) ─────────────────────> 3 tan(arg) ─────────────────────> 3 sinh(arg) ────────────────────> 3 cosh(arg) ────────────────────> 3 tanh(arg) ────────────────────> 3 asin(arg) ────────────────────> 3 acos(arg) ────────────────────> 3 atan(arg) ────────────────────> 3 ln(arg) ──────────────────────> 3 log(arg) ─────────────────────> 3 exp(arg) ─────────────────────> 3 int(arg) ─────────────────────> 3 frac(arg) ────────────────────> 3 fact(arg) ────────────────────> 3 cube(arg) ────────────────────> 3 SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page B2 MINIMUM/MAXIMUM RANGES ──────────────────────── PROGRAMMERS CALCULATOR ────────────────────── DECIMAL -2,147,483,648 to +2,147,483,647 or positive only mode 0 to +4,294,967,295 HEXADECIMAL 0 to ffffffff OCTAL 0 to 37777777777 BINARY 0 to 11111111111111111111111111111111 FLOAT CALCULATOR ──────────────── + 1e-302 to 1e+302 - 1e-302 to 1e+302 * 1e-302 to 1e+302 / 1e-302 to 1e+302 () 15 Levels x ^ y x < 0, y = natural number x = 0, y > 0 x , y x >= 0, y <> 0 x ] 1e-302 < arg < 1e+302 sqr(arg) 0 <= arg < 1e+302 cube(arg) |arg| < 1e+302 sin(arg) |arg| <= 9*1e+9 cos(arg) |arg| <= 9*1e+9 tan(arg) |arg| <= 9*1e+9 sinh(arg) |arg| <= 695.3806981 cosh(arg) |arg| <= 695.3806981 tanh(arg) |arg| < 1e+302 asin(arg) |arg| <= 1 acos(arg) |arg| <= 1 atan(arg) |arg| <= 1e+302 ln(arg) 0 < arg < 1e+302 log(arg) 0 < arg < 1e+302 exp(arg) 1e-302 < arg >= 695.3806981 SHAREWARE VERSION, PLEASE REGISTER. USE REGISTER.FRM Page C1 ERROR MESSAGES ──────────────── When an error occurs CALC_JNC will display the error in the upper left corner of the screen. The possible error messages are as follows. ERROR DEFINITION ─────────────────────────────────── ───────────────────────────────── SYNTAX A command was entered that was not recognized by CALC_JNC. OVERFLOW A calculation caused an overflow to occur within CALC_JNC. DIVIDE BY 0 An attempt to divide a number by zero occurred. SQUARE OF A NEGATIVE The square root of a negative number was attempted. ONLY IN TSR MODE An attempt was made to send the result to the keyboard buffer, but CALC_JNC was not loaded as a TSR. CALC_JNC PROGRAM ALREADY LOADED. CALC_JNC has already been loaded as a TSR. CALC_JNC CANNOT BE REMOVED FROM MEMORY. Another TSR was loaded after CALC_JNC, this prevents CALC_JNC from restoring the interrupt vector table. CALC_JNC NOT FOUND IN MEMORY. CALC_JNC was not found in memory. REGISTRATION FORM NAME :______________________________________________________________ STREET ADDRESS :____________________________________________________ CITY :_______________________________ STATE :___ ZIP :______________ COUNTRY :____________________________ PHONE :_______________________ CIS ID# :____________________________ DISK TYPE : 5.25___ 3.5___ Please send me ____ copies of the registration package at $25.00 each which includes the following. 1) PRINTED MANUAL. 2) CALC_JNC -------> Registered Version. 3) CALC_HEX -------> 22k programmers calculator. 4) CALC_CP -------> Uses 80x87 math coprocessor. 5) MANUAL.DOC -----> Manual on disk. Telephone and E-mail support for 90 days. MAILING ADDRESS: CALC_JNC ver 9.01 James N. Cox 418 Erie Avenue Quakertown, Pa. 18951 U.S.A. ------------------------------------------------------------------------- PHONE ORDERS ONLY ----------------- Visa/Mastercard orders may be made by phone. Software Excitement! 1-800-444-5457 ask for item number V080. ------------------------------------------------------------------------- COMPUSERVE ORDERS ----------------- Visa/Mastercard orders may be made directly on CompuServe by following these next steps. 1) Type GO SE at any prompt. 2) Select number 7 for Register Shareware Software. ------------------------------------------------------------------------- QUESTIONS? ---------- Phone : 215-538-7363 Monday through Friday 8:00pm to 12:00am EST Saturday/Sunday 9:00am to 3:00pm EST CompuServe : [76665,3443] ------------------------------------------------------------------------- All orders will be sent within three business days after receipt of the order. ALL PRODUCTS CARRY A 30 DAY UNCONDITIONAL MONEY BACK GUARANTEE.