home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Power CD-ROM!! 7
/
POWERCD7.ISO
/
dos
/
term150
/
0150ter2._xe
/
DOCS.EXE
/
CUSTOM.DOC
< prev
next >
Wrap
Text File
|
1994-02-09
|
3KB
|
107 lines
┌───────────────────────────────────────────────────────────────────────────┐
│ ░░░░ Super textmodes ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ │
└───────────────────────────────────────────────────────────────────────────┘
Terminate will allow you to set up your own videomode at startup.
When leaving Terminate you can reset to another mode if you like.
The normal thing is to reset to 80x25, but you can do whatever you like. If
the register values are all zeroes, nothing will change, so you don't have to
reset when leaving Terminate.
To set the videomode you must define at least one register like AX = 3, then
INT 10h will be called with AX,BX,CX,DX. After the call Terminate will call
INT 10h,15 (Get videomode) to determine ScreenColumns 80,132 etc. It will
then look in the BIOS area $0040:$0085 for the screenlength. If this does not
work, you can force Terminate to use a fixed screenlength by using a command
line parameter called /SCRLEN=xxx /SCRCOL=xxx. xxx are the lines/columns
you want Terminate to think you are using.
In the following sets of registers, the first set is normally used as the
reset registers, when leaving Terminate, to set a normal 80x25 screen.
All number are in HEX 0-F format. AX=AH*256+AL, AX=FFFE (AH=FF,AL=FE).
Please send configurations if you have set up another graphics card.
If you have another SVGA card, you should look in your manual how to set
up these modes.
SCANMODE in UTILS should find all these videomodes for you, but some
videocards may need some extra information, they will be mentioned here:
Video Seven FastWrite VGA & 1024i VGA
Col/Rows AX BX
80x25 6F05 0003 (Reset)
80x43 6F05 0040 (Set)
80x60 6F05 0043 (Set)
100x60 6F05 0044 (Set)
132x25 6F05 0041 (Set)
132x28 6F05 0045 (Set)
132x43 6F05 0042 (Set)
TRIDENT TVGA BIOS C.2.1 1024K VGA MODE
Col/Rows AX+BX+CX+DX must be the same
80x25 0003 (Reset)
80x30 0050 (Set)
80x43 0051 (Set)
80x60 0052 (Set)
132x25 0053 (Set)
132x30 0058 (Set)
132x43 0059 (Set)
132x60 0056 (Set)
TSENG ET-4000
Col/Rows AX
80x25 0003 (Reset)
80x60 0026 (Set)
100x40 002A (Set)
132x25 0023 (Set)
132x28 0024 (Set)
132x44 0022 (Set)
ATI VGA Wonder, ATI VGA Wonder+
Col/Rows AX
80x25 0003 (Reset)
132x25 0023 (Set)
132x44 0033 (Set)
OAK OTI-037, 800 x 600
Col/Rows AX
80x25 0003 (Reset)
132x25 0050 (Set)
132x43 0051 (Set)
132x60 004F (Set)
XGA
Col/Rows AX
80x25 0003 (Reset)
132x25 0014 (Set)
Orchid Prodesigner VGA
Col/Rows AX
80x25 0003 (Reset)
80x60 0026 (Set)
100x40 002A (Set)
132x25 0024 (Set)
132x28 0023 (Set)
132x44 0022 (Set)
Tecmar VGA/AD
Col/Rows AX
80x25 0003 (Reset)
132x25 0017 (Set)
Paradise VGA & S3
Col/Rows AX
80x25 0003 (Reset)
132x25 0055 (Set)
132x43 0054 (Set)