10408 Toggle alerts when gaps are detected in audio
10409 Change settings used to tune system performance
10410 Fade in selected audio\nFade In
10411 Fade out selected audio\nFade Out
10412 Increase volume of selected audio\nLouder
10413 Decrease volume of selected audio\nSofter
10414 Maximize volume of selected audio\nLoudest
10415 Mute selected audio\nMute
10416 Trim silence from selected audio\nTrim Silence
10417 Apply phone booth-like echo to selected audio\nEcho
10418 Apply auditorium-like echo to selected audio
10419 Apply music hall-like echo to selected audio
10420 Apply arena-like echo to selected audio
10421 Apply canyon-like echo to selected audio
10422 Speed up selected audio\nFaster
10423 Slow down selected audio\nSlower
10424 Record audio at current position\nRecord
10425 Play audio from current position\nPlay
10426 Pause the currently playing audio\nPause
10427 Stop the currently playing audio\nStop
10428 Position to the start of the audio\nGo to Start
10429 Position to the end of the audio\nGo to End
10430 Position slightly backward in the audio\nStep Back
10431 Position slightly forward in the audio\nStep Forward
10432 Position backward in the audio\nRewind
10433 Position forward in the audio\nForward
10439 Arial
10442 %lukHz/%ubit/
10443 %lukHz/
10444 sec
10445 samples
10446 Sel:
10447 Pos
10448 Capacity:
10449
10450 Stopped
10451 Playing
10452 Paused
10453 Recording
10454 From
10455 To
10456 Len
10457 Open Wave File
10458 Paste Wave File
10459 &Undo Ctrl+Z
10460 &Redo Ctrl+Z
10461 Slow
10462 Fast
10463 There are gaps in the audio due to slow system performance or another application.\n\nDo you want to try to prevent such gaps in the future?
10464 &Speed
10467 &Increase
10468 &Decrease
10469 Select &Loop Range
10470 Set Loop &Range
10471 Save Speed on &Exit
10472 The audio cannot be pasted since it is not compatible with the existing audio.
10473 No wave driver is installed. Wave audio cannot be recorded or played back without a wave driver installed.
10474 An error occured trying to save the file to disk. You may need to free up some disk space and try again.
10475 The disk drive for temporary files is full. Recording has been stopped automatically.
10476 Drive being recorded to is full. Recording has stopped automatically.
10477 The disk drive for temporary files is full. Loading has been stopped automatically.
10478 The disk drive for temporary files is full. The effect could not be completely performed on the selected range.
10479 The specified operation cannot be performed. Wait for other operation to complete, and then try again.
10480 Undo failed due to insufficient memory or memory corruption.
10481 The specified file is not a valid .WAV file and cannot be opened.
10482 The file must be saved in the editor before it can be re-opened. If the file is already open in another application, close it there before saving it in the editor.
10483 File is Read-Only. Use a different file name to save changes.
10484 File is currently in use by another application. Unable to save.
10485 Unable to open .WAV file. Format is not supported.
10593 The drive being recorded to is full. Recording has been stopped.
10594 Error trying to save the file to disk. Try freeing up some disk space and try again.
10595 Name%d
10596 MS Sans Serif
10597 Speed
10598 Position
10599 Volume
10600 Pos:
10601 Paused
10602 Unable to run the editor at this time.
10603 The file attached to the selected message has been deleted or moved to a different directory:\n\n
10604 The file attached to the selected message is not a valid .WAV file. It cannot be opened:\n\n
10605 The specified operation cannot be performed. Wait for other operations to be completed, and try again.
10606 Import Memo File
10607 Import Greeting File
10608 Import Voice File
10609 New Message
10610 Old Message
10611 second
10612 seconds
10613 MAILBOX:
10614 NEW
10615 OLD
10616 Record Memo in %s
10617 Please enter some text.
10618 Phone
10619 Arial
10620 Receive Log
10622 Active
10623 Lift handset, hang up TalkWorks.
10624 Disconnecting...
10626 Dialing...
10627 Ringing...
10629 Connecting...
10630 Redialing...
10631 Playing...
10632 Recording...
10635 The specified line resource is already allocated.
10636 The specified device ID is invalid.
10637 The call's bearer mode cannot be changed to the specified bearer mode.
10638 All call appearances on the specified address are currently in use.
10639 The maximum number of outstanding call completions has been exceeded.
10640 The maximum number of parties for a conference has been reached.
10641 Returned when the dialable address parameter contains dialing control characters that are not processed by the service provider.
10642 There is no dial tone.
10643 Returned when the dialable address parameter contains dialing control characters that are not processed by the service provider.
10644 Returned when the dialable address parameter contains dialing control characters that are not processed by the service provider.
10645 The application requested an incompatible API version number.
10646 The application requested an invalid extension version number.
10647 The TELEPHON.INI file has been corrupted.
10648 The line is in use. The call cannot be placed at this time.
10649 The specified address is not valid.
10650 The address specified in the LINECALLPARAMS structure is not valid.
10651 The specified address mode is not valid.
10652 dwAddressStates contains one or more bits that are not LINEADDRESSSTATE_ constants.
10653 The application handle specified in hLineApp is invalid or not recognized.
10654 The specified application name is invalid. If an application name is specified by the application, it is assumed that the string does not contain any non-displayable characters and is NULL-terminated.
10655 The specified bearer mode is not valid.
10656 The specified completion is not valid.
10657 The specified call handle is not valid.
10658 The specified call parameter structure is not valid.
10659 The specified call privilege parameter is not valid.
10660 The specified dwCallSelect parameter is not valid.
10661 The current state of the call does not allow the specified action.
10662 The specified call state list is not valid.
10663 The permanent card ID specified in dwCard could not be found in any entry in the [Cards] section of TELEPHON.INI.
10664 The completion ID is not valid.
10665 The specified call handle for the conference call is not valid, or is not a handle for a conference call.
10666 The specified consultation call handle is not valid.
10667 The specified country code is not valid.
10668 The specified line does not support the indicated device class.
10669 Invalid device handle.
10670 The specified digit list is invalid.
10671 The specified digit mode is not valid.
10672 The specified termination digits are not valid.
10673 The line API extension version is not valid.
10674 The specified group ID is not valid.
10675 The specified line handle is not valid.
10676 The line is currently not in a state in which this operation can be performed.
10677 The permanent location ID could not be found in any entry in the [Locations] section of TELEPHON.INI.
10678 The specified media list is not valid.
10679 The specified media mode parameter is not valid.
10680 The number given in dwMessageID is not within the range specified by the dwNumCompletionMessages field in the LINEADDRESSCAPS structure.
10681 The parameter is not valid.
10682 The specified park ID is not valid.
10683 The specified park mode is not valid.
10684 The pointer is not valid.
10685 The flag or combination of flags that was set for the dwPrivileges parameter is not valid.
10686 The specified bearer mode is not valid.
10687 The specified request mode is not valid.
10688 The specified terminal ID is not valid.
10689 The specified terminal mode is not valid.
10690 The specified timeout is not valid.
10691 The specified tone is not valid.
10692 The specified tone list is not valid.
10693 The specified tone mode is not valid.
10694 The specified transfer mode parameter is not valid.
10695 LINEMAPPER was the value passed in the dwDeviceID parameter, but no lines were found that match the requirements specified in the lpCallParams parameter.
10696 The specified call is not a conference call handle or a participant call.
10697 The line device has no associated device for the given device class.
10698 One of the telephone service provider components is missing or corrupt. Use the Telephony Control Panel to correct the problem.
10699 Insufficient memory to perform the operation.
10700 There currently is no request pending of the indicated mode, or the application is no longer the highest-priority application for the specified request mode.
10701 The application does not have owner privilege to the specified call.
10702 The application is not registered as a request recipient for the indicated request mode.
10703 The operation failed for unknown reasons.
10704 The operation is not available.
10705 The service provider currently does not have sufficient bandwidth for the specified rate.
10706 The operation cannot be completed because of resource overcommitment.
10707 Request Overrun Error
10708 The dwTotalSize field of the structure is smaller than the fixed size of the structure.
10709 A target for the call handoff was not found.
10710 The application invoking this operation is the target of the indirect handoff.
10711 The operation was invoked before any application called lineInitialize.
10712 The string containing user-to-user information exceeds the maximum number of bytes specified in the dwUUIMakeCallSize field of LINEDEVCAPS.
10713 TAPI reinitialization has been requested, so turn off the line device now.
10714 The specified address is blocked from being dialed on the specified call.
10715 Billing Rejected Error
10716 The dwFeature parameter is not valid.
10717 The current Telephony Service Provider does not support multiple instances but is listed more than once in the [Providers] section of TELEPHON.INI. Use the Telephony Control Panel to remove the duplicated driver.
10718 TAPI Line Initialization Error
10719 The specified phone resource is already allocated.
10720 The specified device ID is out of range.
10721 The application requested an API version that cannot be supported by the Telephony API implementation and/or corresponding service provider.
10722 The application requested an extension version that cannot be supported by the service provider.
10723 The TELEPHON.INI file was corrupted.
10724 The device is currently in use.
10725 The specified resource is already allocated.
10726 The specified application name is not valid. If an application name is specified by the application, it is assumed that the string does not contain any non-displayable characters and is NULL-terminated.
10727 The specified button/lamp ID is not valid.
10728 The button mode parameter is not valid.
10729 The button states parameter is not valid.
10730 The specified data ID is not valid.
10731 The specified phone does not support the indicated device class.
10732 Invalid phone API extension version.
10733 The switch hook device parameter is not valid.
10734 The switch hook mode parameter is not valid.
10735 The specified lamp mode parameter is not valid.
10736 The parameter is not valid.
10737 The specified device handle is not valid.
10738 The specified pointer parameter is not valid.
10739 One or more of the specified pointer parameters are not valid.
10740 The dwPrivilege parameter is not valid.
10741 The ring mode parameter is not valid.
10742 No drivers are listed in the TELEPHON.INI file. Use the Telephony Control Panel to install a Telephone Service Provider before running this application.
10743 One of the telephone service provider components is missing or corrupt. Use the Telephony Control Panel to correct the problem.
10744 Unable to allocate memory for phone device.
10745 The application does not have owner privilege to the specified phone device.
10746 The operation failed for unspecified reasons.
10747 The operation is unavailable.
10748 The operation cannot be completed because of resource overcommitment.
10749 Request Overrun Error
10750 The dwTotalSize field of the structure is smaller than the fixed size.
10751 The operation was invoked before any application called phoneInitialize.
10752 TAPI reinitialization has been requested. Turn off the phone device.
10753 Error loading TAPI.DLL
10755 Answering...
10757 Volume Control
10758 SNDVOL32.EXE
10759 WINFAX
10760 Fax Path
10761 WinFax PRO Audio Bar
10762 beep
10763 pause
10766 Num%d
10767 Line %lu - %s
10769 VOLUME
10770 POSITION
10771 SPEED
10772 Memo
10779 Symbol
10817 AudioBar Properties
10872 STARTUP
10873 GOODBYE
10874 WAVE_BYE
10875 faxsend
10876 FAXSTART
10877 FAXMODE
10878 play
10879 V\STARTFAX.
10880 faxmode
10881 GOODBYE_BODY
10882 V\GOODBYE.
10883 hangup
10884 ANNCTR.VMU
10885 STDCTR.VMU
10886 MSGCTR.VMU
10887 V\WINFAX.
10888 SUPER
10889 setsuperuser
10890 callmenu
10891 V\MAILBOX.
10892 &Redial
10893 &Stop
10894 Pausing for retry...
10895 Modem error...
10897 Modem in use. Please wait.
10899 Modem controller failed... restart.
10901 No dial tone... disconnecting.
10903 Line busy... disconnecting.
10905 No answer... disconnecting.
10907 Cannot connect...
10909 Incoming call...
10911 On hold...
10913 Exiting...
10915 Incoming call from:
10916 &What's This?
10917 &Properties
10918 Telephone Properties
10919 Please enter numbers only.
10920 SOFTABORT
10921 Prompt
10922 Action
10923 Default
10924 Delay
10925 Retries
10926 Value
10927 Handsetdown
10928 EndOfList
10929 EmptyList
10930 Error
10931 Superuser
10932 Startup
10933 Button
10934 Handsetup
10935 Menu%02d
10937 TalkWorks Mailbox Wizard
10938 - The primary TalkWorks greeting will always be used.
10939 - The primary user greeting will always be used.
10940 exit
10942 The mailbox name cannot be blank.
10943 Please enter a telephone number to dial when using this device
10944 There cannot be a mailbox with this name. Select another mailbox name.
10945 A mailbox with this name already exists. Select another mailbox name.
10947 Receive Log
10949 Send Log
10951 Wastebasket
10968 GSM
10985 getmsg
10986 setlist
10987 updatemsg
10988 password
10989 capturedigits
10990 matchdigits
10991 noaction
10992 datarecv
10993 returnmenu
10994 setuser
10995 record
10996 boxid
10997 writeinifile
10998 description
10999 execute
11000 log
11001 telnumber
11002 winfaxback
11003 faxback
11004 bftback
11005 sendtones
11006 TalkWorks Greeting
11010 Best Compression
11011 Best Quality
11016 Initializing...
11017 Faxing...
11018 Automated attendant running.
11019 V\
11046 TalkWorks Properties
11047 Linear
11048 Conserve Disk Space
11049 Best Voice Quality
11050 Standard Voice\n
11051 %s must be longer than %d seconds.
11052 Min Message Length
11053 Max Message Length
11054 The length of time you specified in the 'Stop recording messages after' field must be longer than the time after which you delete a message.
11344 You do not have any playback devices on your system.\nSelect OK if you have a voice modem you wish to install,\notherwise choose Cancel to quit.
11345 The Telephone requires a voice-capable modem.\nSelect OK if you wish to install one now,\notherwise choose Cancel to quit.
11346 This mailbox may be used by one or more TalkWorks profiles. If you remove \nit, you may need to re-record greetings and mailbox menu prompts for\nprofiles that use this mailbox.\n\nAre you sure you want to remove this mailbox?
11347 Greeting Text:
11348 Type the text for your greeting:
11349 <TalkWorks Traffic Log created on %s>\n
11669 <Remotely Altered>
11670 The system is busy preparing greetings.
11685 Primary &fax:
11686 Alternate fa&x:
11687 Primary &fax
11688 Alternate fa&x
11689 Copying mailbox menu choices.
11690 Creating user copy of greeting.
11691 Copying greeting.
11692 Preparing user greeting.
11693 Adding user greeting.
11694 Old Greeting
11695 Preparing greetings.
11696 Preparing greetings for profiles.
11697 Preparing greetings for telephone changes.
11698 Preparing greetings on initialization.
11699 Show or hide the Zoom Panel\nToggle Zoom Panel
11700 You have reached the mailbox limit.\nPlease remove any unused mailboxes and try again.
11701 &Dial
11702 &Select
23893 @d @t <%s> from @r @x
23895 Talkworks.txt
23896 Receive Properties
23897 Modem Properties
23909 Information
23910 Warning
23911 Error
23912 Creating "My Talkworks Profile" from SCRPT001.VMU
23913 Preparing Greeting:
23914 Normalizing - Step 1
23915 Normalizing - Step 2
23916 Normalizing - Final Step
23917 "%s", a Talkworks profile\ndoes not exist. The system will find an alternative.
23918 Could not find a Talkworks profile for the enabled voice modem. One must be added via Setup-Talkworks.
23919 Could not find Controller
23920 The password must be 2 - %d digits
23921 Password Error
23922 The password must contain only digits
23923 You must provide a file for logging.
23924 Please provide a profile name.
23925 The profile name already exists or it is a reserved name.\nCancel and remove the profile or choose another name.
23926 A profile name cannot contain any of the following characters:\n \/:*?"<>|
23927 Could not read the Talkworks profile.\nThis is because it is obsolete or obsolete has been user modified.\nDo you want to edit the script file with notepad?
23928 Log file could not be created. Check directory path.
23929 You must provide a entry for logging.
23930 Disabled: %s
23931 You must assign a number for at least one mailbox!
23932 TalkWorks
23933 You have only enabled one mailbox. To create a simple single\nmailbox system, select that option on the Call Management panel\nat the start of the wizard.
23934 One of the features of the "Receive Log" is to accept voice messages\nfrom callers without touch tone service. You must enable the "Receive Log"\nfor this to take effect.\n\n
23935 Press OK to proceed to the next screen or press Cancel to return and select \na Mailbox number for the "Receive Log".
23936 Changing the number of digits will result in mailboxes having the same number.
23937 from %s to %s every
23938 at all times.
23939 A custom recorded greeting "%s" will be played
23940 The greeting "%s" will be played
23941 No greeting will be played
23942 At all other times,
23943 A custom recorded greeting "%s" will be played.
23944 " will be played.
23945 no greeting will be played.
23946 No day selected.
23947 <New Spoken Prompt>
23948 Description for <New Spoken Prompt>
23949 Remote access to this mailbox is disabled.
23950 The user-recorded menu will be played.
23951 The "TalkWorks document prompt" will be played.
23952 A log entry will record to "%s" every time this mailbox is accessed.
23953 TalkWorks will not prompt the caller
23954 TalkWorks will play the "TalkWorks mailbox prompt"
23955 TalkWorks will play the custom mailbox menu
23956 after playing the main greeting.
23957 Fax back will send the fax during same call.
23958 Fax back will send the fax to the number supplied by the caller.
23959 Fax back will prompt the caller to choose the same call fax back or to supply another number.
23960 A cover page will be sent when faxing documents from this mailbox
23961 C&reate
23962 &Remove
23963 Please select at least one day.
23964 The "From" time must be later than the "To" time.
23965 The Talkworks profile selection is empty, please select one.
