home *** CD-ROM | disk | FTP | other *** search
- Press this button to create cam.
-
- Press this button to discard cam and return to drawing.
-
-
-
- Cam displacement diagram. Select a zone in the diagram to set the curve type. Select a line to set angular and radial displacements.
-
- The horizontal scale of the diagram. Its values represent angular displacements about the cam.
-
-
-
-
-
-
-
- Angular displacement of selected center line.
-
- The selected zones transion type.
-
- Radial displacement of selected center line.
-
- Radius of the prime circle.
-
- Maximum follower displacement. Used only to scale the display of the cam displacement diagram in this dialog.
-
-
-
- Angular displacement of selected center line.
-
- The selected zones transion type.
-
- Radial displacement of selected center line.
-
- Press this button to add a new line in the selected zone or after the currently selected line.
-
- Press this button to remove the currently selected line or zone.
-
- Radius of the prime circle.
-
- Maximum follower displacement. Used only to scale the display of the cam displacement diagram in this dialog.
-
-
-
- Check this if you would like to have a milling table generated.
-
- Cam follower type.
-
- Size of the cam follower. For flat cams this is the follower width and for round and offset followers this is the follower radius.
-
- The offset of the follower. This only applies when the offset follower type is chosen.
-
- Angular displacement of selected center line.
-
- Radial displacement of selected center line.
-
- The radius of the fillet.
-
- The items in this section are for the display and editing of global cam specifications.
-
- The items in this section control the output of this dialog.
-
- The help view. To learn more about an item in this dialog, position the mouse over it. To see command-key shortcuts hold down the command-key.
-
- The magic button. Press this to cause a random fluctuation in reality. Enjoy.
-
- The cam construction dialog.
-
- The cam construction dialog.
-
- Size of the cam follower. For flat cams this is the follower width and for round and offset followers this is the follower radius.
-
- The offset of the follower. This only applies when the offset follower type is chosen.
-
- Cam follower type.
-
- The radius of the fillet.
-
- The items in this section are for the display and editing of the current selection in the displacement diagram.
-
-