28002 \n List / Freeze / Thaw / Reset / New frozen layers / Default visibility settings :
28003 \nSelect a viewport :
28004 \nSelect the layer(s) to freeze:
28005 \nSelect the layer(s) to thaw:
28006 \nSelect the layer(s) to reset:
28007 \nNew frozen layer name(s):
28008 \nLayer names(s):
28009 Setting Frozen/<Thawed>:
28010 No layers found matching pattern %s.\n
28011 Layer with name %s already exists!\n
28012 \nAll/Select/<Current>:
28013 All|All Select|Select Current|Current
28014 No layers are frozen in viewport %d\n
28015 The following layers are frozen in viewport %d\n
28499 **LOCALISATION NOTE - MENU STRING START
28500 NEW
28501 New
28502 Creates a new drawing
28503 OPEN
28504 Open
28505 Opens an existing drawing
28506 SAVE
28507 Save
28508 Saves the current drawing
28509 PRINT
28510 Print
28511 Prints the current drawing
28512 PREVIEW
28513 Print Preview
28514 Shows how the printed page will look
28515 SPELL
28516 Check Spelling
28517 Checks the spelling in selected text entities
28518 CUT
28519 Cut
28520 Cuts the selection and puts it on the clipboard
28521 COPY
28522 Copy
28523 Copies the selection to the Clipboard
28524 PASTE
28525 Paste
28526 Pastes the contents of the Clipboard into the drawing
28527 MATCH
28528 Copy Entity Formatting
28529 Copies the formatting of one entity to another
28530 UNDO
28531 Undo
28532 Undoes the last action
28533 REDO
28534 Redo
28535 Redoes the last action to be undone
28536 ERASE
28537 Delete
28538 Deletes the selection
28539 Clear Drawing
28540 Deletes all entities in the drawing
28541 HELP
28542 Help
28543 Opens the help file
28544 LINE
28545 Line
28546 Draws a line
28547 PLINE
28548 Polyline
28549 Draws a polyline, including straight and arc segments
28550 SPLINE
28551 Spline
28552 Creates a new spline, or modifies an existing polyline
28553 SKETCH
28554 Draw Freehand
28555 Draws unconstrained shapes, following your mouse movements
28556 CIRRAD
28557 Circle Center-Radius
28558 Draws a circle given a center point and radius
28559 ARC3PT
28560 3-Point Arc
28561 Draws an arc through 3 points
28562 ELLCEN
28563 Ellipse Axis-Axis
28564 Draws an ellipse given both axes
28565 ELLARC
28566 Elliptical Arc Axes-Angles
28567 Draws an elliptical arc given major and minor axes, and angles
28568 POINT
28569 Point
28570 Draws a point
28571 RECTAN
28572 Rectangle
28573 Draws a rectangle
28574 POLYGO
28575 Polygon
28576 Draws a polygon
28577 TRACE
28578 Traces
28579 Draws lines of a specified width
28580 DONUT
28581 Donut
28582 Draws a donut
28583 SOLID
28584 Plane
28585 Draws a filled plane
28586 DINSER
28587 Insert Block...
28588 Brings up the dialog for inserting existing blocks
28589 BHATCH
28590 Boundary Hatch
28591 Hatches the selection with a pattern of your choosing
28592 Text
28593 Creates a single line of text
28594 MTEXT
28595 Multiline Text
28596 Creates a multiple-line block of text
28597 LINE
28598 Line
28599 Draws a line
28600 RAY
28601 Ray
28602 Draws a line of infinite length in one direction from starting point
28603 XLINE
28604 Infinite Line
28605 Draws a line of infinite length in both directions from starting point
28606 CIRCLE
28607 Circle Center-Radius
28608 Draws a circle given a center point and radius
28609 CIRDIA
28610 Circle Center-Diameter
28611 Draws a circle given a center point and diameter
28612 CIR2PT
28613 Circle 2-points
28614 Draws a circle given 2 end points of the diameter
28615 CIR3PT
28616 Circle 3-points
28617 Draws a circle given 3 points on the circle
28618 CIRTTR
28619 Circle Radius-Tangents
28620 Draws a circle of the given radius, tangent to 2 entities
28621 Convert Arc to Circle
28622 Turns an existing arc into a complete circle
28623 ARC3PT
28624 3-Point Arc
28625 Draws an arc through 3 points
28626 ARCCSE
28627 Arc Center-Start-End
28628 Draws an arc given center, start, and end
28629 ARCSCE
28630 Arc Start-Center-End
28631 Draws an arc given start, center, and end
28632 Arc Start-End-Center
28633 Draws an arc given start, end, and center
28634 Tangent Arc
28635 Draws an arc continuing from the previous entity
28636 ARCCSA
28637 Arc Center-Start-Angle
28638 Draws an arc given center, start, and included angle
28639 ARCSCA
28640 Arc Start-Center-Angle
28641 Draws an arc given start, center, and included angle
28642 Arc Start-Angle-Center
28643 Draws an arc given start, included angle, and center
28644 ARCSEA
28645 Arc Start-End-Angle
28646 Draws an arc given start, end, and included angle
28647 Arc Start-Angle-End
28648 Draws an arc given start, included angle, and end
28649 ARCCSL
28650 Arc Center-Start-Length
28651 Draws an arc given center, start, and chord length
28652 ARCSCL
28653 Arc Start-Center-Length
28654 Draws an arc given start, center, and chord length
28655 Arc Start-Direction-End
28656 Draws an arc given start, starting direction, and end
28657 ARCSED
28658 Arc Start-End-Direction
28659 Draws an arc given start, end, and starting direction
28660 Arc Start-Radius-End
28661 Draws an arc given start, radius, and end
28662 ARCSER
28663 Arc Start-End-Radius
28664 Draws an arc given start, end, and radius
28665 Arc Start-Radius-Angle
28666 Draws an arc given start, radius, and included angle
28667 ELLAE
28668 Ellipse Axis-Axis
28669 Draws an ellipse given both axes
28670 Ellipse Axis-Rotation
28671 Draws an ellipse given major axis and rotation
28672 ELLCEN
28673 Ellipse Center-Axes
28674 Draws an ellipse given center and axes
28675 Ellipse Center-Rotation
28676 Draws an ellipse given center and rotation
28677 ELARC
28678 Elliptical Arc Axis-Axis
28679 Draws an elliptical arc given major and minor axes, and angles
28680 Elliptical Arc Axis-Rotation
28681 Draws an elliptical arc given major axis, rotation, and angles
28682 Elliptical Arc Center-Axes
28683 Draws an elliptical arc given center, axes, and angles
28684 Elliptical Arc Center-Rotation
28685 Draws an elliptical arc given center, rotation, and angles
28686 Polygon, Center-Vertex
28687 Draws a polygon using the center point and a vertex
28688 Polygon, Center-Side
28689 Draws a polygon using center point and distance to side
28690 Polygon, Edge
28691 Draws a polygon using the length and orientation of an edge
28692 MOVE
28693 Move
28694 Moves the selection
28695 COPYOB
28696 Copy
28697 Draws one, or several, duplicates of the selection
28698 OFFSET
28699 Parallel
28700 Copies the selection through a point, or by a given distance
28701 SCALE
28702 Scale
28703 Changes the size of the selection, without changing the aspect ratio
28704 ROTATE
28705 Rotate
28706 Rotates the selection about a point
28707 3D Rotate
28708 Rotates the selection about a line
28709 MIRROR
28710 Mirror
28711 Mirrors the selection about a line
28712 MIR3D
28713 3D Mirror
28714 Mirrors the selection through a plane
28715 ARRREC
28716 Array
28717 Creates a polar or rectangular array of entities
28718 3D Array
28719 Creates polar or rectangular arrays of entities in 3 dimensions
28720 BRE2PT
28721 Break
28722 Breaks a linear entity at the specified point
28723 Join
28724 Joins selected co-linear entities into a single entity
28725 TRIM
28726 Trim
28727 Cuts parts off the selection, using other entities as a die
28728 Flatten
28729 Sets elevation of selection, and changes thickness to zero
28730 EXTEND
28731 Extend
28732 Extends the selection to intersect with a specified entity
28733 MEASUR
28734 Measure
28735 Marks off segments at a specified distance
28736 CHAMFE
28737 Chamfer
28738 Breaks a corner and connects the sides with an angled line
28739 PEDIT
28740 Edit Polyline
28741 Edits the properties of polylines
28742 TEXEDI
28743 Edit Text...
28744 Edits the content of text entities
28745 EXPLOD
28746 Explode
28747 Separates complex entities to the next simpler level of components
28748 CHANGE
28749 Change
28750 Changes the properties of the selection, including elevation
28751 MODIFY
28752 Properties...
28753 Displays and edits the properties of selected entities
28754 EXTEND
28755 Extend
28756 Extends the selection to intersect with a specified entity
28757 LENGTH
28758 Edit Length
28759 Edits the length of the selection
28760 STRETC
28761 Stretch
28762 Stretches (or displaces) the selection without disrupting connections
28763 MEASUR
28764 Measure
28765 Marks off segments at a specified distance
28766 DIVIDE
28767 Divide
28768 Marks off a specified number of segments of equal length
28769 CHAMFE
28770 Chamfer
28771 Breaks a corner and connects the sides with an angled line
28772 FILLET
28773 Fillet
28774 Breaks a corner and connects the sides with a smooth arc
28775 DIMLIN
28776 Linear
28777 Draws a horizontal or vertical dimension
28778 DIMALI
28779 Aligned
28780 Draws the dimension parallel to the selected entity
28781 DIMANG
28782 Angular
28783 Dimensions angles
28784 DIMLEA
28785 Leader
28786 Draws leader lines
28787 DIMLIN
28788 Rotated
28789 Draws a dimension at a specified angle
28790 DIMCEN
28791 Center Lines
28792 Dimensions a circle or arc by its center
28793 DIMBAS
28794 Baseline
28795 Draws multiple dimensions from a single extension line
28796 DIMCON
28797 Continue
28798 Draws dimensions one after another along a line or arc
28799 DIMORD
28800 Ordinate
28801 Draws ordinate dimensions off the entity
28802 TOLERA
28803 Tolerance
28804 Inserts tolerance symbols and values
28805 Make Oblique
28806 Changes an existing dimension to an oblique dimension
28807 DIMNEW
28808 Edit Dimension Text
28809 Replaces existing dimension text with new text
28810 DIMTRO
28811 Rotate Dimension Text
28812 Rotates selected dimension text to a specified angle
28813 DIMHOM
28814 Reposition Dimension Text
28815 Moves or rotates the selected dimension text
28816 Restore Text Postion
28817 Restores selected dimension text to its default position
28818 DIMUPD
28819 Apply Style
28820 Applies the current style to selected dimensions
28821 Save Style
28822 Saves the current dimensioning style
28823 Restore Style
28824 Restores the dimensioning style
28825 Dimension Variable Status
28826 Shows the current values for dimensioning variables
28827 DIMCEN
28828 Center Lines
28829 Places center lines in circle or arc
28830 DIMDIA
28831 Diameter
28832 Dimensions circle or arc by diameter
28833 DIMRAD
28834 Radius
28835 Dimensions circle or arc by radius
28836 SURWED
28837 Wedge
28838 Draws a wedge
28839 SURPYR
28840 Pyramid
28841 Draws a pyramid, or tetrahedron
28842 SURBOX
28843 Box
28844 Draws a box
28845 SURCON
28846 Cone
28847 Draws a cone
28848 Cylinder
28849 Draws a cylinder
28850 SURSPH
28851 Sphere
28852 Draws a sphere
28853 SURDIS
28854 Dish
28855 Draws the lower half of a sphere
28856 SURDOM
28857 Dome
28858 Draws the upper half of a sphere
28859 SURTOR
28860 Torus
28861 Draws a torus
28862 3DMESH
28863 Mesh
28864 Draws a mesh of evenly spaced lines between 4 corner points in 3 dimensions
28865 Polyface Mesh
28866 Creates a 3D polyface mesh with any number of vertices and faces
28867 REVSUR
28868 Revolved Surface
28869 Creates a 3D surface by revolving a linear entity around a line
28870 3D Polyline
28871 Draws a 3 dimensional polyline
28872 Polyface Mesh
28873 Creates a 3D polyface mesh with any number of vertices and faces
28874 3DFACE
28875 3D Face
28876 Creates one or more 3D faces having 3 or 4 sides each
28877 MESH
28878 Polygon Mesh
28879 Creates a 3D polygon mesh given an array of vertices
28880 REVSUR
28881 Revolved Surface
28882 Creates a 3D surface by revolving a linear entity around a line
28883 RULESU
28884 Ruled Surface
28885 Creates a 3D surface by connecting 2 separate linear entities
28886 TABSUR
28887 Extruded Surface
28888 Creates a 3D surface by projecting an entity along a path
28889 EDGESU
28890 Coons Surface
28891 Creates a 3D Coons surface patch between 4 lines forming a closed shape
28892 DIST
28893 Distance
28894 Finds the distance between two points
28895 AREA
28896 Area
28897 Finds the area inside a closed entity
28898 ID
28899 ID Coordinates
28900 Gives the X, Y, and Z coordinates of the selected point
28901 LIST
28902 List Entity Info
28903 Lists information about the selected entity
28904 Drawing Status
28905 Lists the current drawing status
28906 Time Variables
28907 Lists the time-related variable information
28908 OSNNEA
28909 Set Nearest Snap
28910 Sets snap to the nearest point on an entity
28911 OSNEND
28912 Set Endpoint Snap
28913 Sets snap to the end of a linear entity
28914 OSNMID
28915 Set Midpoint Snap
28916 Sets snap to the midpoint of a linear entity
28917 OSNCEN
28918 Set Center Snap
28919 Sets snap to the center point
28920 OSNPER
28921 Set Perpendicular Snap
28922 Sets snap perpendicular to selected entity
28923 OSNTAN
28924 Set Tangent Snap
28925 Sets snap tangent to selected entity
28926 OSNQUA
28927 Set Quadrant Snap
28928 Sets snap to the nearest quadrant of a circle
28929 OSNINS
28930 Set Insertion Point Snap
28931 Sets snap to the insertion point of a block
28932 OSNNOD
28933 Set Point Snap
28934 Sets snap to the nearest Point entity
28935 OSNINT
28936 Set Intersection Snap
28937 Sets snap to the point in space where entities actually intersect
28938 Set Plan View Intersection Snap
28939 Sets snap to where entities would intersect, if they were at current elevation
28940 OSNNON
28941 Clear Entity Snaps
28942 Turns all entity snaps off
28943 Reference Grid
28944 Makes the reference grid visible
28945 Snap
28946 Aligns new entities according to Snap spacing
28947 Draw Orthogonal
28948 Constrains lines to horizontal or vertical
28949 OSNAP
28950 Entity Snap Settings
28951 Sets modes for snapping to entities
28952 Entity Snap Precision
28953 Sets selection area for snapping to entities
28954 Select Color...
28955 Gives a wide range of colors from which to choose
28956 Fill
28957 When on, planar entities are drawn filled with color
28958 Drawing Limits
28959 Sets the drawing limits, and turns them on or off
28960 Elevation
28961 Sets elevation and thickness
28962 Thickness
28963 Sets thickness for new entities
28964 UCS
28965 User Coordinate Systems...
28966 Selects a User Coordinate System in which to display drawing
28967 MOLC
28968 Set Layer by Entity
28969 Sets the current layer to that of the selected entity
28970 LAYERS
28971 Explore Layers...
28972 Opens the IntelliCAD Explorer for layers
28973 Explore Blocks...
28974 Opens the IntelliCAD Explorer for blocks and externally referenced drawings
28975 DDVIEW
28976 Explore Views...
28977 Opens the IntelliCAD Explorer for views
28978 DDUCS
28979 Explore Coordinate Systems...
28980 Opens the IntelliCAD Explorer for coordinate systems
28981 LINETY
28982 Explore Linetypes...
28983 Opens the IntelliCAD Explorer for linetypes
28984 Explore Text Styles...
28985 Opens the IntelliCAD Explorer for text styles
28986 Explore Dimension Styles...
28987 Opens the IntelliCAD Explorer for dimension styles
28988 Drawing Settings...
28989 Opens the Drawing Settings dialog box
28990 DIMSTY
28991 Dimension Settings...
28992 Opens the Dimension Settings dialog box
28993 Base Point
28994 Sets the base point for inserting this drawing
28995 Drawing Units...
28996 Opens the Drawing Settings dialog box for drawing units
28997 Select Color...
28998 Opens the Color dialog box
28999 White
29000 Sets the current color to white
29001 Blue
29002 Sets the current color to blue
29003 Cyan
29004 Sets the current color to cyan
29005 Green
29006 Sets the current color to green
29007 Yellow
29008 Sets the current color to yellow
29009 Red
29010 Sets the current color to red
29011 Magenta
29012 Sets the current color to magenta
29013 BYLAYER
29014 Adopts the color of the layer on which it is used
29015 BYBLOCK
29016 Adopts the color of the block in which it is used
29017 IntelliCAD Explorer...
29018 Opens the IntelliCAD Explorer
29019 Visual Basic for Applications
29020 Launches the Visual Basic for Applications editor
29021 Record Script...
29022 Asks for a name, then begins recording a command line script
29023 Stop Recording
29024 Stops recording the script
29025 Run Script...
29026 Runs a previously saved command line script
29027 BLOCK
29028 Create Block
29029 Saves a block that you can reuse within this drawing
29030 Save Block to Disk...
29031 Saves a block as an independent drawing
29032 Make Snapshot...
29033 Makes a snapshot image of the current window
29034 View Snapshot...
29035 Views a previously saved snapshot
29036 Define Attributes...
29037 Defines how a block's attributes will be created
29038 Edit Block Attributes
29039 Edits one or more attributes of a block
29040 Attribute Display
29041 Shows all attributes, none, or those normally visible
29042 ATTEDI
29043 Edit Attributes
29044 Edits attributes, either all, or just those on-screen
29045 Extract Attributes
29046 Copies data from attributes to a text file
29047 XREATT
29048 External Reference
29049 Associates another drawing with the current one for reference
29050 Load Menu...
29051 Opens the Open Menu dialog box
29052 Create or Edit Entity Data
29053 Creates or edits Entity Data associated with the selected entity
29054 Copy Entity Data
29055 Copies the Entity Data from one entity to another
29056 Move Entity Data
29057 Moves the Entity Data from one entity to another
29058 Delete Entity Data
29059 Deletes the Entity Data from selected entities
29060 Reassociate Entity Data
29061 Associates existing Entity Data with a new application
29062 REDRAW
29063 Redraw
29064 Refreshes the display of the current drawing
29065 PAN
29066 Pan
29067 Pans from side to side, or up and down
29068 ZOOIN
29069 Zoom In
29070 Zooms in on the center of the window by a factor of 2
29071 ZOOOUT
29072 Zoom Out
29073 Zooms out from the center of the window by a factor of 1/2
29074 ZOOWIN
29075 Zoom Window
29076 Zooms to a window that you specify
29077 ZOOEXT
29078 Zoom Extents
29079 Zooms to the extents of the drawing
29080 ZOOM
29081 Zoom
29082 Zooms
29083 Dynamic View Control...
29084 Brings up the real-time Viewpoint Control dialog box
29085 Preset Viewpoints...
29086 Opens the Viewpoint dialog box
29087 VIETOP
29088 Plan View
29089 Shows the top view of the User Coordinate System you specify
29090 DDVIEW
29091 Define View
29092 Displays a perspective view from a given point
29093 Save/Restore View
29094 Saves the current view. Loads or deletes a saved view
29095 Workspaces...
29096 Brings up a choice of workspaces: Paper Space, Model Space, or Tiled
29097 Viewports
29098 Defines and saves multiple-window arrangements for the current drawing
29099 Paper Space Views
29100 Creates multiple views in paper space for the current drawing
29101 ZOOPRE
29102 Zoom Previous
29103 Zooms to the previous view
29104 ZOOALL
29105 Zoom All
29106 Zooms All
29107 ZOOLEF
29108 Zoom Left
29109 Zooms in - you specify lower-left corner
29110 ZOOCEN
29111 Zoom Center
29112 Zooms in, centered on a point you specify
29113 REDRAW
29114 Redraw
29115 Refreshes the display of the current window
29116 Redraw All
29117 Refreshes the display of the all windows for the current drawing
29118 REGEN
29119 Regen
29120 Recalculates display coordinates for the current window
29121 Regen All
29122 Recalculates display coordinates for all windows for the current drawing
29123 HIDE
29124 Hide
29125 Displays the drawing with hidden lines removed
29126 SHADE
29127 Shade
29128 Displays the drawing as solids filled with color
29129 Render
29130 Displays the drawing as solids with shading and highlights
29131 Full Render
29132 Displays the drawing as solids with materials and lighting
29133 Materials...
29134 Brings up a choice of materials for entities when rendering
29135 Backgrounds...
29136 Brings up a choice of backgrounds for rendering
29137 Lighting...
29138 Brings up dialog box to control position and intensity of lighting
29139 Render Settings...
29140 Brings up the Render Settings dialog box
29141 MLEDIT
29142 Edit MultiLines...
29143 Edits the intersections and vertices of multilines
29144 MLINE
29145 MultiLine
29146 Draws a MultiLine - a defined set of parallel lines
29147 Define MultiLine Styles...
29148 Opens the Define MultiLine Styles dialog box
29149 BPOLY
29150 Boundary Polyline
29151 Draws a polyline matching the enclosed area around the selected point
29152 BHATCH
29153 Boundary Hatch
29154 Hatches the enclosed area around the selected point
29155 UNION
29156 Union of Entities
29157 Creates an entity that is the combination of other selected entities
29158 INTERS
29159 Intersection of Entities
29160 Creates an entity that is the area common to other selected entities
29161 SUBTRA
29162 Subtraction of Entities
29163 Creates an entity made by removing the area of one entity from another
29164 OSNAPP
29165 Set Visible Intersection Snap
29166 Sets snap to where it appears entities intersect in the current view
29167 Custom Button 1
29168 Enter a brief explanation here
29169 Custom Button 2
29170 Enter a brief explanation here
29171 Custom Button 3
29172 Enter a brief explanation here
29173 Custom Button 4
29174 Enter a brief explanation here
29175 Custom Button 5
29176 Enter a brief explanation here
29177 Custom Button 6
29178 Enter a brief explanation here
29179 Custom Button 7
29180 Enter a brief explanation here
29181 &New... Ctrl+N
29182 Creates a new drawing
29183 &Open... Ctrl+O
29184 Opens an existing drawing
29185 &Close
29186 Closes the current drawing
29187 &Save Ctrl+S
29188 Saves the current drawing
29189 Updat&e
29190 Updates the drawing in the document
29191 Save &As...
29192 Saves the current drawing under a new name
29193 Export to &File...
29194 Saves the current drawing using a different format
29195 Print Set&up...
29196 Changes printers and print setup
29197 Print Pre&view...
29198 Shows what the current drawing will look like when printed
29199 &Print... Ctrl+P
29200 Print the current drawing
29201 Sen&d Mail...
29202 Sends the current drawing to a mail recipient
29203 E&xit
29204 Exits IntelliCAD
29205 &Undo Ctrl+Z
29206 Undoes previous actions
29207 &Redo Ctrl+Y
29208 Redoes actions that had been undone
29209 Select &All Ctrl+A
29210 Selects all entities in the drawing
29211 Cu&t Ctrl+X
29212 Cuts the selection and puts it on the clipboard
29213 &Copy Ctrl+C
29214 Copies the selection to the Clipboard
29215 &Paste Ctrl+V
29216 Pastes the contents of the Clipboard into the drawing
29217 Paste &Special...
29218 Pastes the contents of the Clipboard in the specified format
29219 &Delete Del
29220 Deletes the selection
29221 C&lear Drawing
29222 Deletes all entities in the drawing
29223 &Links...
29224 Opens the OLE Edit Links dialog box
29225 &Redraw
29226 Redraws the current drawing
29227 Re&gen
29228 Recalculates display coordinates for the current window
29229 &Pan
29230 Pans from side to side, or up and down
29231 &Zoom
29232 Brings up the Zoom submenu
29233 &Zoom
29234 Zooms using any method you specify
29235 Zoom &In
29236 Zooms in on the center of the window by a factor of 2
29237 Zoom &Out
29238 Zooms out from the center of the window by a factor of 1/2
29239 &Window
29240 Zooms to a window that you specify
29241 &Extents
29242 Zooms to the extents of the drawing
29243 &Previous
29244 Zooms to the previous view
29245 &All
29246 Zooms All
29247 &View Max
29248 &Left
29249 Zooms in - you specify lower-left corner
29250 &Center
29251 Zooms in, centered on a point you specify
29252 &Look From
29253 Brings up a submenu of preset viewpoints
29254 &Top
29255 Looks down from the top
29256 &Front
29257 Looks from the front
29258 &Right Side
29259 Looks from the right side
29260 &Left Side
29261 Looks from the left side
29262 Bac&k
29263 Looks from the back
29264 Botto&m
29265 Looks up from the bottom
29266 &Aerial, Right Front
29267 Looks down from the right-front
29268 A&erial, Left Front
29269 Looks down from the left-front
29270 Aerial, Rig&ht Rear
29271 Looks down from the right-rear
29272 Aer&ial, Left Rear
29273 Looks down from the left-rear
29274 Belo&w, Right Front
29275 Looks up from below right-front
29276 Bel&ow, Left Front
29277 Looks up from below left-front
29278 Below, Ri&ght Rear
29279 Looks up from below right-rear
29280 &Below, Left Rear
29281 Looks up from below left-rear
29282 Preset &Viewpoints...
29283 Sets the viewpoint to one of the preset viewing directions
29284 &Dynamic View Control...
29285 Controls the viewing direction in real-time
29286 &Define View
29287 Views from any position and direction
29288 &Save/Restore View
29289 Saves the current view. Loads or deletes a saved view
29290 Plan Vie&w
29291 Shows the top view of the User Coordinate System you specify
29292 Wor&kspaces...
29293 Brings up a choice of workspaces: Paper Space, Model Space, or Tiled
29294 V&iewports
29295 Defines and saves multiple-window arrangements for the current drawing
29296 Pap&er Space Views
29297 Creates multiple views in paper space for the current drawing
29298 Re&ndering
29299 Brings up a submenu of preset viewpoints
29300 &Hide
29301 Displays the drawing with hidden lines removed
29302 &Shade
29303 Displays the drawing as solids filled with color
29304 &Render
29305 Displays the drawing as solids with shading and highlights
29306 &Full Render
29307 Displays the drawing as solids with materials and lighting
29308 &Materials...
29309 Brings up a choice of materials for the entities when rendering
29310 &Backgrounds...
29311 Brings up a choice of backgrounds for rendering
29312 &Lighting...
29313 Brings up dialog box to control position and intensity of lighting
29314 Re&nder Settings...
29315 Brings up the Render Settings dialog box
29316 &Toolbars...
29317 Displays or hides toolbars. Specifies size and color
29318 Pro&mpt History Window F2
29319 Turns the Prompt History Screen on and off
29320 &Command Bar F3
29321 Turns the Command Bar on and off
29322 Status &Bar F10
29323 Turns the Status Bar on and off
29324 &Line
29325 Draws a line
29326 &Polyline
29327 Draws a polyline, including straight and arc segments
29328 &Spline
29329 Creates a new spline, or modifies an existing polyline
29330 &Freehand
29331 Draws unconstrained shapes, following your mouse movements
29332 Ra&y
29333 Draws a line of infinite length in one direction from starting point
29334 &Infinite Line
29335 Draws a line of infinite length in both directions from starting point
29336 &Circle
29337 Draws a circle
29338 &Arc
29339 Draws an arc
29340 &Ellipse
29341 Draws an ellipse
29342 Ellip&tical Arc
29343 Draws an elliptical arc
29344 Dra&w Point
29345 Draws a point
29346 &Rectangle
29347 Draws a rectangle
29348 Poly&gon
29349 Draws a polygon
29350 Don&ut
29351 Draws a donut
29352 Pla&ne
29353 Draws a 3- or 4-sided planar entity
29354 Draw Traces
29355 Draws lines of a specified width
29356 Insert Bloc&k...
29357 Brings up the dialog for inserting existing blocks
29358 &Hatch...
29359 Hatches the selection with a pattern of your choosing
29360 Te&xt
29361 Creates a single line of text
29362 &Multiline Text...
29363 Creates a multiple-line block of text
29364 &3D Entities
29365 Brings up the 3D submenu
29366 &3D Polyline
29367 Draws a 3 dimensional polyline
29368 &Wedge
29369 Draws a wedge
29370 &Pyramid
29371 Draws a pyramid, or tetrahedron
29372 &Box
29373 Draws a box
29374 &Cone
29375 Draws a cone
29376 C&ylinder
29377 Draws a cylinder
29378 &Sphere
29379 Draws a sphere
29380 &Dish
29381 Draws the lower half of a sphere
29382 Do&me
29383 Draws the upper half of a sphere
29384 &Torus
29385 Draws a torus
29386 Mes&h
29387 Draws a mesh of evenly spaced lines between 4 corner points in 3 dimensions
29388 Po&lyface Mesh
29389 Creates a 3D polyface mesh with any number of vertices and faces
29390 &Face
29391 Creates one or more 3D faces having 3 or 4 sides each
29392 Polygon Mes&h
29393 Creates a 3D polygon mesh given an array of vertices
29394 Re&volved Surface
29395 Creates a 3D surface by revolving a linear entity around a line
29396 R&uled Surface
29397 Creates a 3D surface by connecting 2 separate linear entities
29398 E&xtruded Surface
29399 Creates a 3D surface by projecting an entity along a path
29400 C&oons Surface
29401 Creates a 3D Coons surface patch between 4 lines forming a closed shape
29402 &Dimensions
29403 Brings up the Dimensioning submenu
29404 &Linear
29405 Draws a horizontal or vertical dimension
29406 &Aligned
29407 Draws the dimension parallel to the selected entity
29408 An&gular
29409 Dimensions angular lines
29410 L&eader
29411 Draws leader lines
29412 &Rotated
29413 Draws a dimension at a specified angle
29414 &Center Lines
29415 Places center lines in circle or arc
29416 &Diameter
29417 Dimensions circle or arc by diameter
29418 Rad&ius
29419 Dimensions circle or arc by radius
29420 &Baseline
29421 Draws multiple dimensions from a single extension line
29422 Contin&ue
29423 Draws dimensions one after another along a line or arc
29424 &Ordinate
29425 Draws ordinate dimensions off the entity
29426 &Tolerance
29427 Inserts tolerance symbols and values
29428 Make Obli&que
29429 Changes an exNULL,isting dimension to an oblique dimension
29430 Edit Di&mension Text
29431 Replaces existing dimension text with new text
29432 Rotate Dime&nsion Text
29433 Rotates selected dimension text to a specified angle
29434 Re&position Dimension Text
29435 Moves or rotates the selected dimension text
29436 Restore Te&xt Position
29437 Restores selected dimension text to its default position
29438 &Save Style
29439 Saves the current dimensioning style
29440 Restore St&yle
29441 Restores the dimensioning style
29442 Dimension &Variable Status
29443 Shows the current values for dimensioning variables
29444 Ob&ject...
29445 Opens the OLE Insert Object dialog box
29446 Print
29447 Prints the selection
29448 Delete
29449 Deletes the selection
29450 Spelling...
29451 Checks spelling on a selection set on entitites in the current drawing
29452 &Move
29453 Moves the selection
29454 &Copy
29455 Draws one, or several, duplicates of the selection
29456 &Parallel
29457 Copies the selection through a point, or by a given distance
29458 &Scale
29459 Changes the size of the selection, without changing the aspect ratio
29460 &Rotate
29461 Rotates the selection about a point
29462 3D Rotate
29463 Rotates the selection about a line
29464 M&irror
29465 Mirrors the selection about a line
29466 &3D Mirror
29467 Mirrors the selection through a plane
29468 Arra&y
29469 Creates a polar or rectangular array of entities
29470 3D Array
29471 Creates polar or rectangular arrays of entities in 3 dimensions
29472 &Break
29473 Breaks a linear entity at the specified point
29474 &Join
29475 Joins selected co-linear entities into a single entity
29476 &Trim
29477 Cuts parts off the selection, using other entities as a die
29478 Flatten
29479 Sets elevation of selection, and changes thickness to zero
29480 Exten&d
29481 Extends the selection to intersect with a specified entity
29482 Edit &Length
29483 Edits the length of the selection
29484 Stretc&h
29485 Stretches (or displaces) the selection without disrupting connections
29486 Meas&ure
29487 Marks off segments at a specified distance
29488 Di&vide
29489 Marks off a specified number of segments of equal length
29490 Ch&amfer
29491 Breaks a corner and connects the sides with an angled line
29492 &Fillet
29493 Breaks a corner and connects the sides with a smooth arc
29494 &Edit Polyline
29495 Edits the properties of polylines
29496 Edit Text...
29497 Edits the content of text entities
29498 E&xplode
29499 Separates complex entities to the next simpler level of components
29500 Chan&ge
29501 Changes the properties of the selected entities
29502 Pr&operties...
29503 Displays and edits the properties of selected entities
29504 Reference &Grid F7
29505 Makes the Reference Grid visible
29506 &Snap F9
29507 Aligns new entities according to Snap spacing
29508 &Entity Snap
29509 Sets modes for snapping to entities
29510 Entit&y Snap Settings...
29511 Sets modes for snapping to entities
29512 &Nearest Snap
29513 Sets snap to the nearest point on an entity
29514 &Endpoint Snap
29515 Sets snap to the end of a linear entity
29516 &Midpoint Snap
29517 Sets snap to the midpoint of a linear entity
29518 &Center Snap
29519 Sets snap to the center point
29520 &Perpendicular Snap
29521 Sets snap perpendicular to selected entity
29522 &Tangent Snap
29523 Sets snap tangent to selected entity
29524 &Quadrant Snap
29525 Sets snap to the nearest quadrant of a circle
29526 In&sertion Point Snap
29527 Sets snap to the insertion point of a block
29528 P&oint Snap
29529 Sets snap to the nearest Point entity
29530 &Intersection Snap
29531 Sets snap to the point in space where entities actually intersect
29532 Plan &View Intersection Snap
29533 Sets snap to where entities would intersect, if they were at current elevation
29534 A&ll Entity Snaps Off
29535 Turns all entity snaps off
29536 Entity Snap &Precision
29537 Sets selection area for snapping to entities
29538 Draw Ort&hogonal F8
29539 Constrains lines to horizontal or vertical
29540 &Colors
29541 Changes the current color
29542 &Select Color...
29543 Gives a wide range of colors from which to choose
29544 &White
29545 Sets the current color to white
29546 &Blue
29547 Sets the current color to blue
29548 &Cyan
29549 Sets the current color to cyan
29550 &Green
29551 Sets the current color to green
29552 &Yellow
29553 Sets the current color to yellow
29554 &Red
29555 Sets the current color to red
29556 &Magenta
29557 Sets the current color to magenta
29558 BY&LAYER
29559 Adopts the color of the layer on which it is used
29560 BYBLOC&K
29561 Adopts the color of the block in which it is used
29562 &Fill
29563 When on, planar entities are drawn filled with color
29564 D&rawing Limits
29565 Sets the drawing limits, and turns them on or off
29566 &Base Point
29567 Sets the base point for inserting this drawing
29568 Ele&vation
29569 Sets default elevation for new entities
29570 Thic&kness
29571 Sets thickness for new entities
29572 &User Coordinate Systems...
29573 Selects a User Coordinate System in which to display drawingx
29574 Set &Layer by Entity
29575 Sets the current layer to that of the selected entity
29576 Explore L&ayers...
29577 Opens the IntelliCAD Explorer for layers
29578 Explore &Blocks...
29579 Opens the IntelliCAD Explorer for blocks and externally referenced drawings
29580 Explore Vie&ws...
29581 Opens the IntelliCAD Explorer for views
29582 Explore C&oordinate Systems...
29583 Opens the IntelliCAD Explorer for coordinate systems
29584 Explore Line&types...
29585 Opens the IntelliCAD Explorer for linetypes
29586 E&xplore Text Styles...
29587 Opens the IntelliCAD Explorer for text styles
29588 Explore D&imension Styles...
29589 Opens the IntelliCAD Explorer for dimension styles
29590 &Drawing Settings...
29591 Opens the Drawing Settings dialog box
29592 Drawing Units...
29593 Opens the Drawing Settings dialog box for drawing units
29594 Di&mension Settings...
29595 Opens the Dimension Settings dialog box
29596 &Tablet
29597 Changes the tablet settings
29598 Tablet O&n
29599 Turns the tablet on
29600 Tablet O&ff
29601 Turns the tablet off
29602 Ca&librate...
29603 Calibrates the tablet for digitizing drawings
29604 &Configure...
29605 Configures the tablet to use for menu entry with the template
29606 IntelliCAD E&xplorer...
29607 Opens the IntelliCAD Explorer
29608 &Spelling...
29609 Checks spelling on a selection set on entitites in the current drawing
29610 In&quiry
29611 Brings up the Inquiry submenu
29612 &Distance
29613 Finds the distance between two points
29614 &Area
29615 Finds the area inside a closed entity
29616 &ID Coordinates
29617 Gives the X, Y, and Z coordinates of the selected point
29618 &List Entity Info
29619 Lists information about the selected entity
29620 &Variable Setting
29621 Gives the value of a variable, which you can then change, if needed
29622 Drawing &Status
29623 Lists the current drawing status
29624 &Time Variables
29625 Lists the time-related variable information
29626 &Entity Data
29627 Brings up the Entity Data submenu
29628 Create or &Edit Entity Data...
29629 Creates or edits the Entity Data associated with a selected entity
29630 &Copy Entity Data
29631 Copies the Entity Data from one entity to another
29632 &Move Entity Data
29633 Moves the Entity Data from one entity to another
29634 &Delete Entity Data
29635 Deletes the Entity Data from selected entities
29636 Re&associate Entity Data
29637 Associates existing Entity Data with a new application
29638 Record Scrip&t...
29639 Asks for a name, then begins recording a command line script
29640 Stop Recordin&g
29641 Stops recording the script
29642 &Run Script...
29643 Runs a previously saved command line script
29644 Load Menu...
29645 Opens the Open Menu dialog box
29646 &Load LISP or SDS Application...
29647 Loads an application to run inside IntelliCAD
29648 &Visual Basic...
29649 Brings up the Visual Basic for Applications submenu
29650 &Macros...
29651 Runs a Visual Basic Macro
29652 &Visual Basic Editor...
29653 Launches the Visual Basic for Applications editor
29654 &Add-In Manager...
29655 Loads a Visual Basic Project
29656 &Unload Project...
29657 Unloads a Visual Basic Project
29658 Create &Block
29659 Saves a block that you can reuse within this drawing
29660 Save Block to &Disk...
29661 Saves a block as an independent drawing
29662 &Make Snapshot...
29663 Makes a snapshot image of the current window
29664 Vie&w Snapshot...
29665 Views a previously saved snapshot
29666 External Re&ference
29667 Associates another drawing with the current one for reference
29668 Defi&ne Attributes...
29669 Defines how a block's attributes will be created
29670 Edit Bloc&k Attributes
29671 Edits one or more attributes of a block
29672 Attribute Dis&play
29673 Shows all attributes, none, or those normally visible
29674 Edit Attr&ibutes
29675 Edits attributes, either all, or just those on-screen
29676 Extract &Attributes
29677 Copies data from attributes to a text file
29678 &Customize...
29679 Customizes the user interface, including menus and toolbars
29680 &Options...
29681 Changes program settings such as user level and background color
29682 &New Window
29683 Opens an additional window with the current drawing
29684 Cl&ose
29685 Closes the current drawing window
29686 Close Al&l
29687 Closes all drawing windows
29688 &Cascade
29689 Arranges the windows so you can see all title bars
29690 Tile &Horizontally
29691 Tiles the windows horizontally
29692 &Tile Vertically
29693 Tiles the windows vertically
29694 IntelliCAD &Help F1
29695 Opens the help file
29696 &Tip of the Day
29697 Shows you the Tip of the Day
29698 &About IntelliCAD
29699 Opens About dialog box, with version and copyright information
29700 Scr&oll Bars
29701 Turns the Scroll Bars on and off
29702 BPOLY
29703 Boundary Polyline
29704 Draws a polyline matching the enclosed area around the selected point
29705 B&oundary Polyline...
29706 Draws a polyline matching the enclosed area around the selected point
29707 Security...
29708 CADopia on the &Web
29709 Opens the CADopia web page
29710 CADOPIAONWEB
29711 CADopia on the Web
29712 Opens the CADopia web page
29713 **LOCALISATION NOTE - MENU STRING ENDS
30002 Ti&p of the Day...
30003 Did you know...
30004 The Tip of the Day file (icad.tip) was not found in the expected directory.\n\nTo restore this feature, find the file icad.tip, and copy it into the directory where icad.exe is located. If you do not have a backup of icad.tip, you can reinstall ICAD.
30005 &Help
30006 Unable to read the Tip of the Day file (icad.tip).\n\nThe file may be corrupted. To restore this feature, put a new icad.tip file into the directory where icad.exe is located. If you do not have a backup of icad.tip, you can reinstall ICAD.
31001 Invalid field specification
31002 Invalid format type (must be C or N)
31003 Invalid extract format
31100 The image undo was unsuccessful.
31101 The image redo was unsuccessful.
31102 The maximum number of image undos has been reached.
31103 The maximum number of image redos has been reached.
31104 The combination of block name %s and layer name %s\nexceeds the maximum allowable table name size of \n31 characters. Xref operation aborted.
31105 The combination of block name %s and linetype name %s\nexceeds the maximum allowable table name size of \n31 characters. Xref operation aborted.
31106 The combination of block name %s and style name %s\nexceeds the maximum allowable table name size of \n31 characters. Xref operation aborted.
37837 ~Normal All Outer Standard ~_Normal ~_All ~_Outer ~_Standard
37838 Normal
37839 No
37840 Outer
37841 Standard
37842 Yes
37843 \nAngle for pattern <%s>:
37844 \nCould not find file "%s".
37845 \nCould not open file "%s".
37846 \nCross-hatch area? <%s>
37847 \nENTER for direct hatch option/<Select hatch boundary entities>:
37848 \nENTER to apply hatch/<Starting point>:
37849 \nHatch style to use: All/Outer/<Standard>:
37850 \nHatch style to use: All/Standard/<Outer>:
37851 \nHatch style to use: Standard/Outer/<All>:
37852 \nHatch: ? to list patterns/SEttings/& for lines/Preview/STyle/<Pattern name> <LINES>:
37853 \nHatch: ? to list patterns/SEttings/& for lines/Preview/STyle/<Pattern name> <%s>:
37854 \nHatch: ? to list patterns/SEttings/& for lines/Preview/STyle/<Pattern name>:
37855 \nPattern definition not found.
37856 \nPattern scale too large for selected boundary.
37857 \nPattern(s) to list <*>:
37858 \nPattern to preview: ? to list/SEttings/& for lines/<LINES> :
37859 \nPattern to preview: ? to list/SEttings/& for lines/<%s>:
37860 \nPattern to preview: ? to list/SEttings/& for lines/<Pattern name>:
37861 \nPlease use one of the following hatch styles:\n S = Standard - Fills alternating areas\n O = Outer - Fills outermost areas only\n I = Internal - Fills all areas within outermost boundary
37862 \nProceed/Angle for pattern <%s>:
37863 \nProceed/Scale for pattern <%s>:
37864 \nRetain boundary as a polyline? <%s>
37865 \nScroll/<ENTER to view next screen>:
37866 \nSpace between standard pattern lines <%s>:
37867 \nStarting point:
37868 \n Pattern Type Description\n
37869 Warning: This computer program is protected by copyright law and international treaties. Unauthorized reproduction or distribution of this Program, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
37870 Application to start:
37871 be
37872 b
37873 DOS Command:
37874 Files to erase:
37875 Files to list:
37876 rt
37877 w
37878 ; IntelliCAD Generated PGP file.\n
37879 ACIS_getdispobjs
37880 Bad file format.
37881 be
37882 Command Line
37883 Error using shell command.
37884 Fatal error
37885 File not found.
37886 Find Distance
37887 Grip edit
37888 IntelliCAD Shell
37889 Loading preview...
37890 Missing: %d) >
37891 Out of memory.
37892 Path not found.
37893 Regenerating drawing...
37894 rt
37895 Sample Text
37896 SDS_AtThreadSwapCount is > 1, Correcting threads!
37897 Software\Visio\IntelliCAD\Config
37898 Start a new drawing
37899 Unknown problem.
37900 Welcome to IntelliCAD 98
37901 We apologize - a fatal error has occured.\nIntelliCAD must exit.\n\nIf this problem persists, please report it to us at:\n www.visio.com/intellicad/bugs\n\nIntelliCAD can attempt to save any open drawings to:\n <FILENAME>.$FE\n\nWould you like to try saving your drawings?
37902 (command
37903 (if (/= s::startup nil)(s::startup))
37904 (if (/= s::startup nil)(s::startup)
37905 \nAuto saving open drawings...
37906 \nERROR: Running <%s>. System reports:
37907 \nERROR: User defined Lisp functions cannot be transparent.
37908 \nOpposite corner:
37909 \nSubstituting font [%s] for font [%s].\n
37910 \nCancel
37911 \n-- Unable to locate the Externally Referenced file %s --\n
37937 A shell command was not executed properly. Please confirm\nthat all command line parameters are valid and try again (2).
37938 A shell command was not executed properly. Please confirm\nthat all command line parameters are valid and try again (3).
37939 The drawing "%s" is already open.\nDo you want to revert to the last saved version?
37940 VBA Files (*.vba)|*.vba|
37941 vbi
37942 Visual Basic for Applications failed to initialize. Please check\nthe installation to make sure VBA was installed correctly.
37943 .lsp
37944 \nSelect first corner of window:
37945 \nSelect point for new origin:
37946 \nSelect second corner of window:
37947 .scr
37948 \FileVersion
37949 (Read-Only)
37950 Attribute Name
37951 Invalid Angle Entered
37952 Invalid Height Entered
37953 Invalid Point Entered
37954 More memory is needed to do this operation
37955 Name
37956 Prompt
37957 The Attribute must have a name.
37959 Value
37960 You have entered an invalid point.
37961 You have entered an invalid rotation angle.
37962 You have entered an invalid height.
37963 \nSelect insertion point:
37964 \nSelect text height:
37965 \nSelect text angle:
37966 Name
37967 Prompt
37969 Value
37970 Attribute Extract Template File
37971 Attribute Extract Output File
37972 Comma-Delimited Text File|cdf,Space-Delimited Text File|sdf,Drawing Exchange Format|dxx,AutoCAD Output File|out,Text File|txt
37973 Drawing Exchange Format|dxx,Comma-Delimited Text File|cdf,Space-Delimited Text File|sdf,AutoCAD Output File|out,Text File|txt
37974 Space-Delimited Text File|sdf,Comma-Delimited Text File|cdf,Drawing Exchange Format|dxx,AutoCAD Output File|out,Text File|txt
37975 Text File for Template|txt
37976 The file output file could not be opened.
37978 w
37979 -- Error opening file. --
37980 -- Error reading file. --
37981 -- Not a Bitmap file. --
37982 -- Out of memory. --
37983 -- StretchBlt failed(%dL) --
37984 Please shut down the in-place editing session before closing\nthis window.
37986 Window close
37987 IntelliCAD Command Bar
37988 OLE Edit
37989 OLE Move
37991 Specify Prototype Drawing
37992 Standard Drawing File|dwg
37994 accel
37995 Alt
37996 Backspace
37997 Command
37998 Ctrl
37999 Del
38000 Down Arrow
38001 End
38002 Error creating accelerator table (%d). Default accelerators will be loaded.
38003 Home
38004 Ins
38005 Left Arrow
38006 nAccelKeys
38007 Num 0
38008 Num 1
38009 Num 2
38010 Num 3
38011 Num 4
38012 Num 5
38013 Num 6
38014 Num 7
38015 Num 8
38016 Num 9
38017 Num Del
38018 Num *
38019 Num +
38020 Num -
38021 Num //
38022 Page Down
38023 Page Up
38024 Pause
38025 Right Arrow
38026 Shift
38027 Up Arrow
38028 Zero
38029 %s\AccelKey-%d
38030 Add Enter command
38031 Add Escape command
38032 An item has not yet been selected.
38033 Are you sure you want to remove the submenu '%s' and all its contents?
38034 Are you sure you want to remove the item '%s'?
38035 Are you sure you want to reset the menu? This action replaces\nthe current menu with the default menu that is provided\nby IntelliCAD.
38036 Cannot add a spacer to the root menu.
38037 Cannot add a spacer immediately before an existing spacer.
38038 Cannot add a spacer immediately after an existing spacer.
38039 Command:
38040 Confirm Item Delete
38041 Confirm Submenu Insertion
38042 Confirm Submenu Delete
38043 Context Menu Item
38044 Context Menu Sub-Item
38045 Delete
38046 Enter a name for the new item before continuing.
38047 Insert Context Menu Item
38048 Insert Context Menu Sub-Item
38049 Insert Menu Item
38050 Insert Menu Sub-Item
38051 Insert Spacer
38052 Insert...
38053 Menu Item
38054 Menu Sub-Item
38055 Rename
38056 Spacer
38057 Tear-off Name:
38058 The current menu was auto loaded when the drawing was opened.\nAny changes made to this menu will be lost when the drawing is\nclosed.
38059 This will turn the item '%s' into a submenu heading,\nand will delete its Command and Help String information.\nDo you wish to continue?
38060 t
38061 Wait for input command
38062 Warning
38063 [IntelliCAD Custom Menu File]\n
38064 --Spacer--
38065 Alias
38066 The alias "%s" contains invalid characters. Only the characters\nA-Z, 0-9, underscores ( _ ), and dashes ( - ) are valid.
38067 Command
38068 CrMode
38069 Error creating aliases (%d). Default aliases will be loaded.
38070 nAliases
38071 RetVal
38072 ShellPrompt
38073 The alias "%s" already exists in the alias list. Do you wish\nto overwrite it?
38074 The alias "%s" cannot contain spaces. Please replace all\nspaces with underscores.
38075 %s\Alias-%d
38076 AccessValue
38077 Are you sure you want to reset the toolbars? This action replaces the\ncurrent toolbar buttons with the default buttons that are provided by\nIntelliCAD.
38078 Are you sure you want to reset the keyboard assignments? This action\nreplaces the list of accelerators with the default list that is provided\nby IntelliCAD.
38079 Are you sure you want to reset the alias assignments? This action\nreplaces the list of aliases with the default list that is provided\nby IntelliCAD.
38080 by IntelliCAD.
38081 Close
38082 Customize
38083 Database
38084 FormName
38085 FormPic
38086 Form Designer
38087 IntelliCADD Form Designer
38088 IntelliCAD Alias File|ica,AutoCAD Alias File|pgp
38089 IntelliCAD Keyboard File|ick
38090 IntelliCAD Menu File|icm
38091 IntelliCAD.
38092 Path
38093 Resource File|rc,Dialog File|dcl
38094 Select Alias File
38095 Select File
38096 Select Keyboard File
38097 Select Menu File
38098 Select Toolbar File
38099 Select * from Forminfo
38100 Select * from xlinkinfo
38101 Standard Menu File|mnu,Add-on Menu File|mns,IntelliCAD Menu File|icm
38102 Standard Menu File|mnu,Add-on Menu File|mns
38103 The Database %s is read only.\n You will not be able to save changes.
38104 The file "%s" is not a valid IntelliCAD Menu file
38106 Unable to locate the Database %s
38107 XLink
38108 Xlink
38109 Xlink='%s'
38110 &Export...
38111 &Help
38112 &Import...
38113 The file "%s" is not a valid IntelliCAD Toolbar file
38114 The file "%s" is not a valid IntelliCAD Keyboard file
38115 The file "%s" is not a valid IntelliCAD Alias file
38116 .mns
38117 &Reset
38118 ToolBar%d
38119 A button has not yet been selected.
38120 Select Bitmap File
38121 Sorry, this function is not yet completed.
38122 Windows Bitmap Image|bmp
38123 Warning: DeferWindowPos failed - low system resources.\n
38124 ActiveX objects cannot be saved while exiting IntelliCAD.\nDiscard all changes to %s?
38125 An invalid file extension was entered.
38126 Cannot create a unique filename.
38127 Contents
38128 c:\tmp
38129 Error saving to file "%s".\nThe file may be corrupt.
38130 ERROR: Document could not be locked.
38131 e
38132 Failed to create the item.
38133 The filename or extension is too long. The filename\nand extension cannot exceed 255 characters.
38134 %s...\nThis filename is no longer valid. Please save under a different name.
38135 %s...\nThis file is already in use. Do you want to open as read-only?
38136 %s...\nThis file is already in use. Please save under a different name.
38137 %s...\nThis file is read-only. Do you want to continue?
38138 %s...\nThis file is Read-Only. Please save under a different name.
38139 Unnamed -
38140 wb
38141 .emf
38142 %s...\n
38143 .wmf
38144 .\n
38145 mode
38146 XOR ink
38147 3D point
38148 Application
38149 Application name
38150 Binary data
38151 Braces {}
38152 Braces '{''}'
38153 Database handle
38154 Distance
38155 Insert...
38156 Integer
38157 Integer type
38158 Layer
38159 Layer name
38160 Long
38161 Long type
38162 Real
38163 Real type
38164 Scale factor
38165 String
38166 This is some text
38168 World direction
38169 World space position
38170 World space displacement
38171 D World space direction:
38172 %f,%f,%f
38173 \n3D World space position:
38174 \n3D World space displacement:
38175 \nDistance
38176 \nSelect entity:
38177 3DFace
38178 Arc
38179 Attribute
38180 Attribute Definition
38181 Circle
38182 Ellipse
38183 Hatch
38184 Insert
38185 Leader
38186 Line
38187 MLine
38188 MText
38189 Point
38190 Polyline
38191 Ray
38192 Solid
38193 Spline
38194 Text
38195 Tolerance
38196 Trace
38199 Varies
38200 Viewport
38201 Xline
38202 \nSelect alignment point:
38203 \nSelect arc center point:
38204 \nSelect circle center point:
38205 \nSelect dimension point:
38206 \nSelect end point:
38207 \nSelect insertion point:
38208 \nSelect origin point:
38209 \nSelect point 1:
38210 \nSelect point 2:
38211 \nSelect point 3:
38212 \nSelect point 4:
38213 \nSelect point:
38214 \nSelect solid point 1:
38215 \nSelect solid point 2:
38216 \nSelect solid point 3:
38217 \nSelect solid point 4:
38218 \nSelect start point:
38219 \nSelect text start point:
38220 \nSelect text origin:
38221 \nSelect text alignment point:
38222 \nSelect viewport center point:
38223 Are you sure you want to delete %d items?
38224 Are you sure you want to delete %s
38225 Assigns the default linetype, %s, to the Layer %s.
38250 Cannot insert a block in a non current drawing yet.
38251 Cannot insert a block in a non current drawing.
38252 Cannot remove layer 0.
38253 Cannot rename layer 0. Specify a different layer.
38254 Cannot rename linetype BYBLOCK. Specify a different linetype.
38255 Cannot rename linetype BYLAYER. Specify a different linetype.
38256 Cannot rename linetype CONTINUOUS.
38257 Cannot rename Text style STANDARD. Specify a different Text style.
38258 Cannot rename UCS WORLD. Specify a different UCS.
38259 Cannot rename an XREF layer.
38260 Cannot rename %s: A %s with the name you specified already exists. Specify a different %s.
38261 Cannot set a frozen layer current.
38262 Cannot set a XREF layer current.
38263 Cannot set a XREF text style current.
38264 Cannot set a XREF Linetype current.
38265 This operation cannot be performed. Please run Explorer directly from the Tools menu to perform this operation.
38266 Change...
38267 Confirm Block Delete
38268 copy by selecting the (replace) button, or skip by selecting the (skip) button.
38269 Creating blocks (%d)
38270 Deletes all the entities currently using the linetype %s.
38271 Deletes all entities currently using text style %s.
38272 Deletes layer %s, and all entities on this layer.
38273 Delete %s
38274 Details
38275 Does not replace layer %s with new attributes.
38276 Does not replace linetype %s with new attributes.
38277 Does not replace text style %s with new attributes.
38278 Does not replace UCS %s with new attributes.
38279 Does not replace view %s with new attributes.
38280 Does not replace block %s with new block.
38281 IntelliCAD Explorer - %s
38282 Elements
38283 File %s does not have read permissions.
38284 First value cannot be negative.
38285 Freeze/Thaw
38286 Gives you a choice of layers to which you can move all the entities currently on the layer %s. Deletes the old layer after moving the entities.
38287 Gives you a choice of linetypes to assign to layer %s, then deletes the linetype %s.
38288 Gives you a choice of linetypes to assign to the entities now using %s, then deletes the old linetype.
38289 Gives you a choice of text styles to assign to the entities now using %s, then deletes the old text style.
38290 Images
38291 insert
38292 IntelliCAD Explorer
38293 Items in the clipboard may only be pasted into the same instance\nof the application that they were copied from.
38294 Item Types
38295 Layer
38296 Layer %s
38297 Layer "%s" already exists in the current drawing. You can replace the attributes of layer "%s" with the new attributes by selecting the replace button, or skip by selecting the Skip button.
38298 Leaves the layer %s, and the entities on it, as they are.
38299 Linetype
38300 Linetype File|lin
38301 Linetype from file %s
38302 Linetype Name
38303 Linetype Description
38304 Linetype %s
38305 Linetype
38306 Loading blocks list
38307 Lock/Unlock
38308 new attributes by selecting the Replace button, or skip by selecting the Skip button.
38309 New %s
38310 No
38311 Off
38312 On
38313 On/Off
38314 Paste %s
38315 Redo not available
38316 Replaces the attributes of layer %s.
38317 Replaces the attributes of linetype %s.
38318 Replaces the attributes of text style %s.
38319 Replaces the attributes of UCS %s.
38320 Replaces the attributes of view %s.
38321 Replaces the block %s.
38322 Replace
38323 Replace linetype %s
38324 r
38325 Save Block
38326 Select Linetype File
38327 Skip
38328 Standard
38329 Standard Drawing File|dwg
38330 Table Explorer
38331 Text style
38332 Text style %s
38333 The name can use up to 31 characters, including letters, numbers,\nhyphens, underscores, and dollar signs ($), but not spaces.\nPlease try again.
38334 Unable to find the requested help file.\n%s\nCheck installation.
38335 Unable to open file %s for reading.
38336 Undo not available
38337 Yes
38338 You are about to delete the linetype %s. Layer %s currently has this as its linetype.
38339 You are about to delete the linetype %s. This will affect entities currently using this linetype.
38340 You are about to delete the text style %s. This will affect entities currently using this text style.
38341 You have requested that IntelliCAD delete the layer %s. If you want to keep the entities that are currently on this layer you can choose to move them to another layer.
38342 already exists in the current drawing. You can replace the attributes of Linetype
38343 Style "%s" already exists in the current drawing. You can replace the attributes of Style "%s" with the new attributes by selecting the Replace button, or skip by selecting the Skip button.
38344 UCS "%s" already exists in the current drawing. You can replace the attributes of UCS "%s" with the copies attributes by selecting the Replace button, or skip by selecting the Skip button.
38345 View "%s" already exists in the current drawing. You can replace the attributes of View "%s" with the copies attributes by selecting the (replace) button, or skip by selecting the (skip) button.
38346 Block "%s" already exists in the current drawing. You can replace the block "%s" with the new copy by selecting the (replace) button, or skip by selecting the (skip) button.
38347 At least one entity in the selection set contains ACIS information.\nExploding it will remove this information.\nDo you want to explode the selection anyway?
38348 %d Blocks
38349 %d Layers
38350 %d Linetypes
38351 %d Text styles
38352 %d UCS's
38353 %d Views
38354 %f,
38355 AaBbYyZz
38356 _insert;%s
38357 %s settings in drawing - [%s]
38358 Warning: Possible data loss.
38359 with the new
38361 Bars
38362 Check Box
38363 Controls
38364 Dialog
38365 Done importing from file %s
38366 Edit
38367 Fkey
38368 Fkey=%d
38369 FormDefinition
38370 FormName
38371 FormName='%s'
38372 FormPic
38373 FormSize
38374 formtoolbar-Summary
38375 Form Designer
38376 Id
38377 List Box
38378 Push Button
38379 Radio button
38380 Save changes to %s
38381 ScreenCX
38382 ScreenCY
38383 Select * from Forminfo where Fkey=%d
38384 Select * from Itempropvals where Fkey=%d and Id=%d
38385 Select * from Forminfo
38386 Select * from Itempropvals where Fkey=%d
38387 Static
38388 Text
38389 The Database %s is read only.\n You will not be able to save changes.
38390 Unable to locate the Database %s
38391 %d,%d
38392 Events
38393 General
38394 Styles
38395 Block Name:
38396 Exit
38397 Forward
38398 GeoTrack
38399 Live
38400 Off
38401 Pause
38402 Playing
38403 Play %s
38404 service Failed to Start. Error %d
38405 Width:
38406 Zoom Multiple:
38407 Zoom Scale:
38408 \nError creating entity
38409 \nError with buildlist
38410 \nERROR: Could not set GPSLASTPT
38412 Insert Block
38413 Standard Drawing File|dwg
38415 .insert;
38416 \nSelect insertion point:
38417 Block Name Error
38418 Duplicate Block Name
38419 Invalid Name Entered
38420 The block name can use up to 31 characters, including letters, numbers,\nhyphens, underscores, and dollar signs ($), but not spaces. Please enter a new name for the block.
38421 The block name entered is the same as the name of the current drawing. Please enter a new name for the block.
38422 The name can use up to 31 characters, including letters, numbers,\nhyphens, underscores, and dollar signs ($), but not spaces.\nPlease try again.
38423 You have entered a block name that already exists in the drawing. Please enter a unique name for this block.
38424 You have entered an xref name that already exists in the drawing. Please enter a unique name for this xref.
38425 You have entered a block name that already exists in the drawing. Please enter a unique name for this block.
38426 Failed to create resize bar\n
38427 Send Mail Error
38428 To use Send Mail, you must have a MAPI-compliant mail program. Please install one and try again.
38429 Cannot create a unique filename.
38430 c:\tmp
38431 ERROR: Insufficient memory.
38432 ERROR: Invalid file type.
38433 ERROR: "%s" is not a valid file.
38434 IntelliCAD 2000
38435 IntelliCAD Prompt History
38436 Clipboard data invalid or unavailable. The Paste operation was not performed.
38437 Object Descriptor
38438 Please shut down the in-place editing session before exiting IntelliCAD.
38439 Visio
38440 IntelliCAD Pointing Area
38441 IntelliCAD Template Area
38442 wb
38443 Window
38444 WinTab Initialization Failed!
38445 ^C^C_DXFIN;%s
38446 ^C^C_INSERTOBJ;%s
38447 ^C^C_INSERT;%s
38448 ^C^C_MENU;%s
38449 ^C^C_OPENIMAGE;%s
38450 ^C^C_OPEN;%s
38451 ^C^C_SCRIPT;%s
38452 ^C^C_VSLIDE;%s
38453 ^C^C_(LOAD "%s")
38454 ^C^C_(XLOAD "%s")
38455 is not a valid file.
38456 &Window
38457 AddSpacerBefore
38458 be
38459 b
38460 Cannot change the state of a menu title.
38461 Can't open file %s, error = %u\n
38462 ChekVar
38463 Command
38464 Command Bar
38465 Customize...
38466 EntityVisibility
38467 Entity Snap
38468 Error creating menu (%d). Default menu will be loaded.
38469 File
38470 GrayVar
38471 HelpString
38472 Help
38473 Invalid Popup Reference.
38474 Modify
38475 Name
38476 nMenuItems
38477 Opens this document
38478 Out of memory error. Can't open file %s\n
38479 pop0
38480 pop17
38481 POP%d
38482 Status Bar
38483 SubLevel
38484 Toolbars...
38485 t
38486 UnloadName%d
38487 Visibility
38488 Window
38489 &Copy History
38490 ^C^C^C._OPEN;%s
38491 &Entity Snap
38492 &File
38493 "%s" is not an available tear-off menu name.
38494 The file "%s" is not a valid ICAD Menu file
38495 &Modify
38496 &Options...
38497 &Paste
38498 %s.%s
38499 %s\%s
38500 '%s'\nCannot open file.\nFile not found.
38503 Open Template
38505 \nhook function set to standard MFC hook function
38506 \nhook function set to non-standard hook function
38507 \nm_el.cbStruct =
38508 \nm_el.dwFlags =
38509 \nm_el.hWndOwner =
38510 \nm_el.lpszCaption =
38511 \nm_el.lCustData =
38512 \nm_el.hInstance =
38513 \nm_el.lpszTemplate =
38514 \nm_el.hResource =
38515 No model space viewports defined,\nstarting the mspace command.
38517 Do you want to change back to the default Print settings?
38518 Please enter a windowed print area greater than zero.
38519 Prepared by %s,%s Confidential,%s
38520 Prepared by %s, ,%s
38521 Printed Inches
38522 Printed Millimeters
38523 Reset Print Settings
38525 YourCompany
38526 YourName
38527 "%s" is not a valid value for printed units.\nPlease enter a valid value before continuing.
38528 "%s" is not a valid X value.\nPlease enter a valid value before continuing.
38529 "%s" is not a valid Y value.\nPlease enter a valid value before continuing.
38530 "%s" is not a valid value for drawing units.\nPlease enter a valid value before continuing.
38531 (none)
38532 %s Confidential,%s
38533 %s Confidential,%s,
38534 %s,%s,%s
38535 %.2f x %.2f
38536 Done
38537 ERROR: Insufficient memory.
38538 IcadPromptMenu.h
38539 PromptMenu
38540 Can't load image %s.\nThis file type is currently not supported.
38541 Can't load image %s.\nUnsupported 32 bit alpha channel image.
38542 hiisDeleteRaster
38543 hiisGetLastError
38544 hiisNewRaster
38545 Loading image...
38546 Problem loading imaging code. (%i)
38547 Problem loading image %s.\n(%i) %s
38548 \n-- Unable to locate image file %s. --\n
38549 No Application name %s has been registered.
38551 You must supply an Old Application name.
38552 You must supply a New Application name.
38553 \nSelect the entities to re-associate Entity Data with the new application
38554 Form "%s" was not found
38555 OnBUpd
38556 OnChng
38557 OnClick
38558 OnDClick
38559 OnGClick
38560 OnKD
38561 OnLClick
38562 OnMD
38563 OnMUp
38564 Select %s from Itempropvals where Fkey=%d and Id=%d
38565 Select * from Forminfo where FormName='%s'
38566 Unable to locate the Database %s
38567 Attribute
38568 Entities Selected=
38569 Link/SQL
38570 Location
38571 Properties
38573 Entities added=
38574 Entities removed=
38575 \nCenter of circle:
38576 \nFirst corner of inclusive window:
38577 \nFirst corner of exclusive window:
38578 \nFirst corner of crossing window:
38579 \nFirst point of fence:
38580 \nFirst vertex of inclusive polygon:
38581 \nFirst vertex of outside polygon:
38582 \nFirst vertex of crossing polygon:
38583 \nNext point:
38584 \nNext vertex:
38585 \nOpposite corner:
38586 No entities added or removed
38587 \nPoint to locate entity around:
38588 \nRadius of circle:
38589 \nSelect single entity:
38590 Total entities=
38591 3D Settings
38592 Arrows
38594 Coordinate Input
38595 Dimension Style
38596 Display
38597 Drawing Units
38599 Entity Creation
38600 Entity Modification
38601 Format
38602 Invalid
38603 Invalid Name Entered
38604 Lines
38605 Possible Loss of Data
38606 rt
38608 Style already exists!
38609 Text
38610 The combined length of prefix and suffix is greater than allowed by DIMPOST. Truncating.
38611 The combined length of prefix and suffix is greater than allowed by DIMAPOST. Truncating.
38612 The name can use up to 31 characters, including letters, numbers,\nhyphens, underscores, and dollar signs ($), but not spaces.\nPlease try again.
38614 Units
38615 \nFillet radius <%s>:
38616 <None>
38617 \nSelect first corner:
38618 \nSelect second corner:
38619 \nSelect base point:
38620 A dictionary was not found. Please check the installation\nto make sure a dictionary was installed.
38621 The spelling check is complete.
38622 The Spell Checker failed to initialize. Please check the installation\nto make sure the Spell Checker was installed correctly (1).
38623 The Spell Checker failed to initialize. Please check the installation\nto make sure the Spell Checker was installed correctly (2).
38624 The Spell Checker failed to initialize. Please check the installation\nto make sure the Spell Checker was installed correctly (3).
38626 Vspl_ie.dat
38627 (No Suggestions)
38628 Architectural Units
38629 Command Bar
38630 Current Color
38631 Current Layer
38632 Current Linetype
38633 Decimal Units
38634 Engineering Units
38635 Entity Snap Settings
38636 Fractional Units
38637 Model Space
38638 Paper Space
38639 Properties...
38640 Scientific Units
38641 Status Bar
38642 Toggle Grid On/Off
38643 Toggle Orthogonal On/Off
38644 Toggle Snap On/Off
38645 Toggle Viewport Mode
38646 AdviseData %s|%s failed
38647 Already got a server!\n
38648 Callback %4.4XH
38649 Can't advise on %s|%s
38650 Connect to %s
38651 Disconnect
38652 Exec
38653 Exec failed
38654 Failed to connect to %s|%s. Error %u
38655 Poke %s|%s failed
38656 Request %s|%s
38657 Request %s|%s failed
38658 System topic request: %s
38659 Wild connect to %s
38660 Wild connect to %s refused
38661 <error>
38662 <null>
38663 '_ZOOM;2x
38664 '_ZOOM;.5x
38666 FilePos
38667 icad.tip
38668 r
38669 StartUp
38670 TimeStamp
38671 Tip
38672 More memory is needed to do this operation
38675 \nSelect location for tolerance:
38676 {\Fgdt;a}%%v
38677 {\Fgdt;b}%%v
38678 {\Fgdt;c}%%v
38679 {\Fgdt;d}%%v
38680 {\Fgdt;e}%%v
38681 {\Fgdt;f}%%v
38682 {\Fgdt;g}%%v
38683 {\Fgdt;h}%%v
38684 {\Fgdt;i}%%v
38685 {\Fgdt;j}%%v
38686 {\Fgdt;k}%%v
38687 {\Fgdt;r}%%v
38688 {\Fgdt;t}%%v
38689 {\Fgdt;u}%%v
38690 {\Fgdt;n}
38691 {\Fgdt;m}%%v
38692 {\Fgdt;l}%%v
38693 {\Fgdt;s}%%v
38694 {\Fgdt;m}
38695 {\Fgdt;l}
38696 {\Fgdt;s}
38697 {\Fgdt;p}
38698 be
38699 Bottom
38700 Can't open file %s, error = %u\n
38701 Could not find the file "%s".\nPlease add the file's location to the Search Path in the\nOptions dialog.\nIf OK is chosen, the default bitmap will be used in it's place.\nCancel will terminate the import, leaving only the toolbars that\nhave been created successfully up to this point.
38702 Custom Toolbars
38703 Default toolbar title
38704 Error creating toolbar (%d). Default toolbars will be loaded.
38705 Error reading file "%s".
38706 Error while reading file "%s".\nSystem resources have been exhausted, cannot continue. The\nsystem may become unstable. Please shut down or reset to the\ndefault toolbars to safely continue. (%d)
38707 Hide
38708 Left
38709 Name
38710 No toolbars found in file to import\n"***TOOLBARS" statement is missing.
38762 Error: couldn't create preview view for frame.\n
38763 Error: Failed to create preview view.\n
38764 Error: Preview could not create toolbar dialog.\n
38765 Failed to create compatible clipboard format.
38766 Unused
38767 Internal Error: File=%s Line=%d.
38768 Length: %s
38769 Length: %s @ Angle: %s
38770 Object Descriptor
38771 OLE Verbs here
38772 Ready
38773 Scale: X=%s,Y=%s
38774 Scale: Z=%s
38775 View scroll
38776 %s,%s,%s
38778 a block
38779 Cancel
38780 commands in script format
38781 entities or table entries including layers, linetypes, etc
38782 IntelliCAD Entities
38783 IntelliCAD Block
38784 Ready
38785 Script Text
38786 \n:
38787
\n[ IntelliCAD -
38788 ]
\n
38789 Database
38790 Database|mdb
38791 Database='%s.mdb'
38792 IcadXlink.h
38793 Open
38794 Path
38795 SELECT DISTINCT Database FROM xlinkinfo
38796 Select * from xlinkinfo
38797 SELECT * FROM xlinkinfo
38798 The Xlink name '%s' is currently defined,Please enter a different XLink key name
38799 Welcome to the XLink Wizard! This wizard helps you prepare an XLink. An XLink is used to link an entity in your drawing with a record in a database. Please select next if you wish to continue.
38800 Xlink='%s'
38801 Xlink='%s'
38802 .mdb
38803 %s%s
38804 %s.%s
38805 This is a test for Xref's.
38807 Yes No ~_Yes ~_No
38808 \nAbout to REGEN this drawing, OK to proceed? <Y>:
38809 \nOur sincerest apologies - This is not an electron microscope.\nUnable to zoom in any closer.
38810 \nUnfortunately, zooming must remain within the known universe.\nUnable to zoom out any further.
38811 **LOCALISATION NOTE - INSERT COMMAND
38812 block
38813 Block already exists
38814 Block name is invalid. Please use <block>=<filename>.
39874 \nSelect a point to define a boundary or hatch area:
39875 \nTablet initialization failed.
39876 Scale/View
39877 Advanced
39878 Color/Width Map
39879 Screen Color
39880 Output Color
39881 Line Width
39882 Please use CTRL-SHIFT right click to use RTPAN
39883 Please use CTRL-SHIFT click to use RTZOOM
39884 Sets precision for angular dimension
39885 Sets dimesions to alternate units
39886 Decimal places in alternate dimensions
39887 Scale factor for alternate units
39888 Decimal places for alternate tolerances
39889 Suppresses zeros on alternate tolerances
39890 Alternate linear units format
39891 Suppresses zeros on alternate dimensions
39892 Alternate prefix or suffix
39893 Create associative dimensions
39894 Specifies size of lines and arrowheads
39895 Units format for angular dimensions
39896 Block to use in place of arrowheads
39897 Block to replace first arrowhead
39898 Block to replace second arrowhead
39899 Sets display of center marks or lines
39900 Color for dimension lines & arrowheads
39901 Color for extension lines
39902 Color for dimension text
39903 Decimal places for dimension units
39904 Length of dimension line beyond obliques
39905 Distance between baseline dimensions
39906 Length of extension line past dimension
39907 Extension line distance from entity
39908 Specifies placement of text and arrows
39909 Gap between text and dimension lines
39910 Specifies horizontal placement of text
39911 Scale factor for linear dimensions
39912 Sets dimensions to display as limits
39913 Prefix or suffix for dimension text
39914 Rounding factor for linear dimensions
39915 Draws user-defined blocks for arrowheads
39916 Scale factor for dimension graphics
39917 Suppresses first dimension line
39918 Suppresses second dimension line
39919 Suppresses first extension line
39920 Suppresses second extension line
39921 Update dimension while dragging
39922 Suppresses outside dimension lines
39923 Current dimension style
39924 Specifies vertical position of text
39925 Decimal places for tolerance values
39926 Scale factor for tolerance text height
39927 Sets inside text aligned or horizontal
39928 Forces text between extension lines
39929 Value for lower tolerance
39930 Draws dimension line with outside text
39931 Sets outside text aligned or horizontal
39932 Sets tolerance display on or off
39933 Sets vertical position of tolerance text
39934 Value for upper tolerance
39935 Size of oblique lines in place of arrows
39936 Vertical position adjustment for text
39937 Text Style for dimension text
39938 Default height of dimension text
39939 Suppresses leading zeros on tolerances
39940 Linear units format
39941 Sets cursor mode on user-positioned text
39942 Specifies display of inches
39943 The area you selected is invalid.
39944 You cannot use ellipses or splines to create a polyline boundary.
39945 POI
39946 &XRef Layer Visibility
39947 Advanced ~_Advanced
39948 \nAdvanced/<Internal point>:
39949 Boundary Island ~Object eXit ~_Boundary ~_Island ~_Object ~_eXit
39950 \nBoundary set/Island detection/<eXit>:
39951 New All ~_New ~_All
39952 \nSpecify boundary set. New/<All>:
39953 Yes No Outer ~_Yes ~No ~Outer
39954 \nDo you want Island Detection? No/Outer only/<Yes>:
39955 Polyline ~Region ~_Polyline ~_Region
39956 \n<Polyline>:
39957 Please enter an integer between 1 and 255.
39958 Please enter a numeric value.
39959 \nThe selected viewports do not form a rectangle.
39960 black
39961 Print Configuration Files (*.pcp)|*.pcp||
39962 Inches
39963 Millimeters
39964 varies
39965 \nToo many entities selected. No valid snap was found.
39966 \nToo many entities selected. No valid intersection was found.
39967 The line segments of the selected hatch pattern are too dense for the specified area. Try using a larger hatch scale to make the segments less dense or select a hatch pattern with fewer segments.
50063 does not exist. Would you like to use this path anyway?
50064 Please select which path you would like to define first.
50065 Please select which file you would like to define first.
50066 ;
50067 could not be opened.
50068 Software\Visio\Intellicad
50069 Security
50070 You must set a Security level for IntelliCAD. If you do not, the program defaults to Medium security. This means that every time you start IntelliCAD, you will receive a message concerning potentially unsafe macros.\n\nTo avoid receiving these messages, set the Security level to High. Doing this automatically disables unsigned (unsafe) macros.\n\nChoose Tools > Security, and then click High.\n\nSetting the Security level to Low is not recommended. \n
50071 Software\Visio\Intellicad\Addins
50072 Document
50073 Workspace
50074 ThisDocument
50075 Warning! Another instance of IntelliCAD is running. The VBA Common Project is being opened Read Only.\n Any changes made to this project will not be saved.
50076 To run Visual Basic, you will have to install VBA6. See the readme for more details.
50077 Run IntelliCAD VBA Macro
50078 IntelliCAD is unable to store the requested security value in registry\n
50079 COM Add-In
50080 :
50081 The text height must be %g or greater.
50082 The width factor must be from\n%g to %g.
50083 The oblique angle must be from\n%d to %d.
50084 http://www.cadopia.com
50085 The current style has been modified.\nDo you wish to save the changes?
50086 New Text Style
50087 Style name:
50088 You have entered a style name that already exists in the drawing. Please enter a unique name for this style.
50089 Duplicate Style Name
50090 Rename Text Style
50091 \nAdd-In Function name:
50092 \nMacro name:
50093 This pre-R14 version does not support some entities.\nThese entities will not be saved in the drawing.\nContinue?
50094 \nThis pre-R14 version does not support some entities.\nThese entities will not be saved in the drawing.
50095 \nSelect hatch entity to copy properties from:
50096 The selected entity is not a hatch entity.
50097 \nProperties copied:
50098 Name
50099 , Scale
50100 , Spacing
50101 true
50102 false
50103 , Angle
50104 Cannot rename an XREF text style.
50105 ThisWorkspace
50106 CommonProjects
57344 IntelliCAD
57345 Ready
59144 CurLay
59145 CurCol
59146 CurLtp
59147 0.0,0.0
59148 Turns the selected Layer On or Off\nLayer On/Off
59149 Freezes or Thaws the selected layer\nFreeze/Thaw
59150 Locks or Unlocks the selected layer\nLock/Unlock
59151 Selects control(s).\nSelect
59152 Creates a new static text\nStatic Text
59153 Creates a new button\nButton
59154 Create a new check box\nCheck Box
59155 Creates a new radio button\nRadio Button
59156 Creates a new edit box\nEdit Box
59157 Runs the dialog box to test appearance and behavior\nTest
59158 Creates a new dialog box\nNew Dialog
59159 Saves the dialog box\nSave
59160 Cuts the selection and puts it in the clipboard\nCut
59161 Copies the selection and puts it in the clipboard\nCopy
59162 Inserts the clipboard contents at the insertion point\nPaste
59163 Aligns the left edges of the selected controls with the dominant control\nAlign Left (Ctrl+Left Arrow)
59164 Aligns the right edges of the selected controls with the dominant control\nAlign Right(Ctrl+Right Arrow)
59165 Aligns the top edges of the selected controls with the dominant control\nAlign Top(Ctrl+Up Arrow)
59166 Aligns the bottom edges of the selected controls with the dominant control\nAlign Bottom(Ctrl+Down Arrow)
59167 Centers the controls vertically within the dialog box\nCenter Vertical
59168 Centers the controls horizontally within the dialog box\nCenter Horizontal
59169 Evenly spaces the selected controls horizontally\nSpace Across
59170 Evenly spaces the selected controls vertically\nSpace Down
59171 Resizes the selected controls to have the same width as the dominant control\nMake Same Width
59172 Resizes the selected controls to have the same height as the dominant control\nMake Same Height
59173 Resizes the selected controls to have the same size as the dominant control\nMake Same Size
59174 Creates a new list box\nList Box
59175 SNAP
59176 GRID
59177 ORTHO
59178 ESNAP
59179 TILE
59180 TL
59181 WH
59182 PAPER
59183 MODEL
59184 IntelliCAD 2000
59185 &About IntelliCAD 2000
59188 2.0
59189 TABLET
59190 IntelliCAD 2000 failed to initialize.
59191 This product is licensed.
59192 This product is for evaluation only.
59200 \nEditing hatch entities is not yet supported.
60000 This pre-R14 version does not support some entities.\nThese entities will not be saved in the drawing.\nContinue?