home *** CD-ROM | disk | FTP | other *** search
MKMSGF c""# EAn error occurred while accessing the file "%1". EAn error occurred in the LAPS exception handler. Unable to process current error condition. EAn error occurred in the LAPS exception handler. Unable to process current error condition. EAn error occurred in the OS/2 Help Facility. LAPS is unable to provide help information at this time. EAn error occurred while reading the file "%1". EAn error occurred during configuration. EAn error occurred while initializing the system for configuration. EAn OS/2 system error occurred. EAn error occurred while creating the directory "%1". EA memory allocation error occurred. ESource files for LAPS could not be found on entered path "%1". EA Presentation Manager error occurred. LAPS is unable to continue. EInsufficient space on drive "%1" for LAPS installation. EAn error occurred while attempting to update "%1". EAn error occurred while attempting to write to the file "%1". EUnable to load the DLL "%1". EOne or more source files is missing from the LAPS installation diskette. EUnable to preserve the current PROTOCOL.INI file. EAn error occurred unpacking the file "%1". EAn error occurred while attempting to process a locked file. EThe device "%1" is not ready. EUnable to copy "%1" to the path specified by the L1 parameter. EUnattended configuration was unable to create the PROTOCOL.INI file. EInitialization of CID failed. ELAPS must be installed before configuration or installing additional drivers can be performed. ILAPS was successfully installed. ILAPS additional network drivers successfully installed. ILAPS is configured. I[%1]: ENo network information files were found at "%1". EThe network information file, "%1", is not valid. This network driver support will not be installed. EThe installation of the driver, "%1", failed. EThe driver %1 could not be installed and the previous version could not be restored. EThe previous version of the driver "%1" could not be restored. EThe file "%1" was not found on the source for additional network drivers. IThe installation of the network driver "%1" completed successfully. ESome files were locked by the operating system during the installation of additional network drivers. For this reason, Install will no longer be selectable during this invocation of LAPS. ELAN Adapter and Protocol Support is currently running. Only one invocation can run at a time. EThe value provided for LAPS installation target parameter is not valid. EError reading response file. ECannot read the file "%1". ELAPS was unable to migrate the OS/2 1.3 Extended Edition configuration file %1. EError processing PROT_SECTION in the response file; the SECTION_NAME keyword is missing. EInternal software error during configuration. ESection name "%1" is invalid and cannot be used for configuration. ILAPS successfully migrated the OS/2 1.3 Extended Edition configuration file %1. EError trying to write a file. EUnable to migrate the OS/2 Extended Edition 1.3 configuration file "%1" because no LAN information was available. EUnable to open the OS/2 Extended Edition 1.3 configuration file "%1". EUnable to read the OS/2 Extended Edition 1.3 configuration file "%1". ELAPS was unable to migrate the OS/2 Extended Edition 1.3 configuration file "%1" because it is not a verified configuration file. EThe version of configuration file "%1" is not supported for migration. ELAPS was unable to migrate the SYSLEVEL.OS2 file from OS/2 Extended Edition to OS/2 Standard Edition 1.3. The SYSLEVEL.OS2 file is damaged. EThere is no value specified in the response file for the keyword %1 and the associated Network Information File (.NIF) does not provide a default. EError processing a PROT_SECTION in the response file. The NIF keyword is missing. ENo Network Information Files (.NIF) were found. ELAPS attempted to update CONFIG.SYS and the current PROTOCOL.INI file does not contain any configuration information. ENot all parameters were specified. EToo many parameters were specified. EThe specified source is not valid. EThe source must be a valid path specification. EThe specified target is not valid. EThe target must be a valid drive specification. EThe target must be a valid path specification. I%1 completed successfully. EUnable to execute %1; the return code is %2. E%1 returned an error; the exit code is %2. E%1 did not complete successfully. EMissing dynamic link library module or entry point; object name is %1. EUnable to copy %1; the return code is %2. EUnable to obtain information for %1; the return code is %2. EUnable to open %1; the return code is %2. EUnable to seek within %1; the return code is %2. EUnable to read from %1; the return code is %2. EUnable to write to %1; the return code is %2. EUnable to close %1; the return code is %2. EUnable to delete %1; the return code is %2. EError reading from %1; not all bytes were read. EError writing to %1; not all bytes were written. EUnable to allocate memory; the return code is %1. EError while parsing %1. EUsage: [<path>]LAPSDISK <source> <target> EUsage: [<path>]LAPSRSP <source> <target> {/t: /i: /c: /u:} ELAPSRSP requires a colon to separate the keyword and the value. EA LAPSRSP switch is specified but the value is not provided. EAn invalid switch was specified on the LAPSRSP command line. EInvalid installation value. EInvalid target drive specification. EInvalid upgrade level value. IUsage: [<path>]THINLAPS <source> <target> <NIF> [/P:<filespec>] EThe Network Information File (.NIF) filename must be valid and include the filename extension. EUnable to locate any Network Information Files (.NIF) on target drive. EUnexpected error while searching for Network Information Files (.NIF). EWarning: Creating new CONFIG.SYS on the target drive. EAn error occurred while attempting to add LAPSDEL invocation to MAINTDEL.CMD. ESHPIINST.DLL could not be successfully loaded. ELAPS installation was not successful. ELAPS did not install due to UPGRADE_LEVEL specified in the response file. ILAPS was successfully removed. EAn error occurred trying to create the file "%1". EError while attempting to copy the file "%1". ELAPS was unable to read or update the IBMLVL.INI file correctly. Since the install status of LAPS is undefined, LAPS will be removed from the system. ECONFIG.SYS could not be successfully updated with the configuration information provided by LAPS. Your system may not be operational when restarted. ELAPS was unable to create the PROTOCOL.INI file for NDIS support. EA CONFIG.SYS file cannot be located at the value specified for the /TU: parameter. ENetBIOS configuration values exceed acceptable configuration requirements. ELANDD configuration values exceed acceptable configuration requirements. EThe "/P:" parameter is not valid or was not followed by a valid filespec. EThe syntax for this parameter is "/P:<PROTOCOL.INI filespec>". I; Remove the semicolon from the "ETHERAND_TYPE =" statement to change ; the protocol convention from IEEE 802.3 to DIX 2.0. ; ETHERAND_TYPE = "D" I; Remove the semicolon from the "INTERRUPT =" statement and append the ; number of the interrupt level configured for this adapter. ; INTERRUPT = ; Remove the semicolon from the "IOADDRESS =" statement and append the ; starting address of the input/output address space for this adapter. ; IOADDRESS = ; Remove the semicolon from the "TRANSCEIVER =" statement and append ; either EXTERNAL or ONBOARD to identify the transceiver configuration ; of this adapter. ; TRANSCEIVER = I; Remove the semicolon from the "SLOTNUMBER =" statement when multiple ; Ethernet adapters are installed. Append the slot number of this ; adapter after the equals sign. ; SLOTNUMBER = I; If multiple PC Net adapters are installed and the target adapter is ; configured as secondary, remove the semicolon from the "ADAPTER =" ; statement. ; ADAPTER = 1 I; Remove the semicolon from the "ADAPTER =" statement when this Token ; Ring adapter should be assigned as the second Token Ring adapter. ; ADAPTER = ALTERNATE ; Remove the semicolon from the "RAM =" statement when the Token Ring ; adapter is an AT-bus adapter. Append the value 0xD800 (for primary) ; or 0xD400 (for alternate) after the equals sign. ; RAM = I; Remove the semicolon from the "SLOTNUMBER =" statement when multiple ; Ethernet adapters are installed. Append the slot number of this ; adapter after the equals sign. ; SLOTNUMBER = I; Remove the semicolon from the "IRQ =" statement and append the number ; of the interrupt level configured for this adapter. ; IRQ = ; Remove the semicolon from the "IOBASE =" statement and append the ; starting address of the input/output port for this adapter. ; IOBASE = ; Remove the semicolon from the "RAMADDRESS =" statement and append the ; starting address of the shared memory space configured for this ; adapter. ; RAMADDRESS = I; Remove the semicolon from the "SLOTNUMBER =" statement when multiple ; Ethernet adapters are installed. Append the slot number of this ; adapter after the equals sign. ; SLOTNUMBER = I; Remove the semicolon from the "IRQ_LEVEL =" statement and append the ; number of the interrupt level configured for this adapter. ; IRQ_LEVEL = ; Remove the semicolon from the "IO_PORT =" statement and append the ; base address of the input/output address space for this adapter. ; IO_PORT = I; Remove the semicolon from the "SLOTNUMBER =" statement when multiple ; Ethernet adapters are installed. Append the slot number of this ; adapter after the equals sign. ; SLOTNUMBER = 
(.txt)