723 8: 0.9375-625 lines (PAL-default in PAL MPEG-1 presets)
724 9: 0.9815
725 10: 1.0255
726 11: 1.0695
727 12: 1.1250-525 lines (NTSC-default in NTSC MPEG-1 presets)
728 13: 1.1575
729 14: 1.2015
730 15:
731 X
732 X
733 1: Square sample
734 2: (Default) Display aspect ratio 3:4
735 3: Display aspect ratio 9:16
736 4: Display aspect ratio 1:2.21
737 5:
738 6:
739 7:
740 8:
741 9:
742 10:
743 11:
744 12:
745 13:
746 14:
747 15:
748 X
749 X
750 The current capture size is %dX%d but your newly defined capture setting (%s) is set to %dX%d. \nClick OK to adjust your video capture size to %dX%d.
751 Adjust Capture Size
752 The current video capture size is (%dX%d), it does not match the capture setting (%s).\nThe adjustments may be incorrect or your capture device does not support %dX%d. \nPlease adjust the dimensions before capturing.
753 You have selected Half-D1 in the Properties dialog box\nbut the current capture size is %dX%d.\nPlease clear the Half-D1 option in the Properties dialog box.\n
754 The current capture size is %dX%d which is incompatible for Half-D1. To use Half-D1, \nthe capture frame size must be 720X480 or 720X576.
755 Incorrect size.
756 Digital video driver cannot capture MPEG files.
757 Bit rate value must be between %d and %d.
758 Invalid value.
759 Warning
760 DirectShow codec capture plug-in
761 This plug-in supports the capturing with DirectShow software codec.
762 MPEG VFW capture plug-in
763 This plug-in is for MPEG capturing for Video For Windows capture drivers.
764 Screen Capture Device
765 MPEG capture does not accept RGB %d bit format.\nPlease use a different codec.
766 MPEG capture does not accept %s codec.\nPlease change a suitable codec from video format selection.
767 \nIt is recommended to use codec (1) YUV codec first, then (2) RGB-24 codec.\n
776 Maximum variable bit rate should be greater than the average bit rate.
777 Maximum variable bit rate should be greater than the maximum average bit rate.\nMaximum average bit rate should be greater than the minimum average bit rate.
778 Component
779 PAL
780 NTSC
781 SECAM
782 MAC
783 Unspecified format
784 X
785 X
786 MPEG-1 Video Bit Rate Setting
787 MPEG-2 Video Bit Rate Setting
788 Current bit rate is out of the MPEG-1 range, \nyou need to set the MPEG-1 video bit rate value again.
789 Project Template Value
790 MPEG width size must be divided by 16,\nCurrent capture width is %d and can not be divided by 16.\n
791 Wrong dll version.
792 DSW MPEG capture plug-in
793 MPEG capture plug-in for Direct Show capture driver
794 VFW MPEG capture plug-in
795 MPEG capture plug-in for Video For Window capture driver
796 Can not set MPEG parameters error.
797 Unable to capture PAL MPEG file from NTSC DV Cam.
798 Unable to capture NTSC MPEG file from PAL DV Cam.
799 Only 352*240 and 720*480 frame size can be accepted when capturing MPEG file from NTSC DV Cam.
800 Only 352*288 and 720*576 frame size can be accepted when capturing MPEG file from PAL DV Cam.
801 MPEG Settings...
802 Audio and MPEG Settings...
803 The frame rate, %s, can not use PAL format.
804 The current Video Format is PAL, and the vdieo format will be change into NTSC.
805 Can not set the video format for MPEG error.
806 The capture video bit rate is %d.\nThe frame size is %dX%d. \nIn the frame size, video bit rate should be in %d and %d.
807 (%d-%d)
1001 Cannot create the event object.
1002 Invalid capture driver index.
1003 Cannot create an object.
1004 Failed the interface validation.
1005 Cannot create the video capture filter.
1006 Cannot create the audio capture filter.
1007 Cannot find the specified interface.
1008 This interface is not supported.
1009 Error in getting video format information.
1010 Cannot get the current video state.
1011 Cannot set the capture file.
1012 Cannot pre-allocate capture file space.
1013 Failed to pre-roll the video device.
1014 Cannot set the audio format.
1015 Failed to create the capture window.
1016 Cannot detect the video capture hardware.
1017 Failed to build a capture graph.
1018 Failed to build a preview graph.
1019 Failed to set the master stream.
1020 Cannot get the filter graph.
1021 Cannot add the filter.
1022 Cannot render streaming video.
1023 Cannot set the frame rate.
1024 Cannot set the filter graph.
1025 Cannot start the preview graph.
1026 Cannot stop the preview graph.
1027 Cannot start the capture graph.
1028 Cannot stop the capture graph.
1029 An error occurred in the capturing process. This may be due to insufficient disk space.
1030 Cannot find the specified pin.
1031 Cannot connect the two pins.
1033 Cannot capture the still image.
1034 An error occurred in the capturing process.\nThe captured file may have exceeded the file size limitation of the operating system.
1035 Unable to set the video format.
1037 TI DV is not supported.
1038 An error occurred while retrieving the software codec compression info.\nIf you changed the capture driver recently, you need to select the software codec again.
1039 Cannot add this codec into the DirectShow codec capture plug-in.\nPlease select another codec.
1040 Unable to capture the file because it is copyright protected.
1041 No signal input. Please connect your capture device with video input.
1042 Unable to capture the PAL MPEG file from NTSC DV Cam.
1043 Unable to capture the NTSC MPEG file from PAL DV Cam.
1044 Only 352*240 and 720*480 frame size can be accepted when capturing MPEG file from NTSC DV Cam.
1045 Only 352*288 and 720*576 frame size can be accepted when capturing MPEG file from PAL DV Cam.
1046 No input signal or signal is unclear,\nDo you want to continue to capture?
1047 Unexpected Error :
1048 Nothing captured. Please check if it has any input signal.\nMaybe that no device control is selected.
1049 Failed to build an MPEG capture graph or unable to connect to MPEG capture pin.
