Microsoft Programmer's Library 1.3

home *** CD-ROM | disk | FTP | other *** search

/ Microsoft Programmer's Library 1.3 / Microsoft_Programmers_Library.7z / MPL / net / landosus.txt < prev next >

Wrap

Text File | 2013-11-08 | 222.9 KB | 7,399 lines

Microsoft LAN Manager - User's Guide for MS-DOS ──────────────────────────────────────────────────────────────────────────── Microsoft(R) LAN Manager - User's Guide for MS-DOS(R) VERSION 2.0 ──────────────────────────────────────────────────────────────────────────── Microsoft Corporation Information in this document is subject to change without notice and does not represent a commitment on the part of Microsoft Corporation. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of the agreement. It is against the law to copy the software on any medium except as specifically allowed in the license or nondisclosure agreement. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the express written permission of Microsoft Corporation. U.S. Government Restricted Rights The SOFTWARE and Documentation are provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of The Rights in Technical Data and Computer Software clause at 252.227-7013 or paragraphs (c) (1) and (2) of Commercial Computer Documentation─Restricted Rights at 48 CFR 52.227-19, as applicable. Contractor/Manufacturer is Microsoft Corporation/One Microsoft Way/Redmond, Washington 98052-6399. (C)1990 Microsoft Corporation. All rights reserved. Printed in the USA. Microsoft, MS, MS-DOS, XENIX, and the Microsoft logo are registered trademarks of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. IBM is a registered trademark of International Business Machines Corporation. Document Number: SY10060-0590 OEM-D787-2Z Table of Contents ──────────────────────────────────────────────────────────────────────────── Before You Begin How To Use This Manual Notational Conventions Finding Further Information PART I Overview ──────────────────────────────────────────────────────────────────────────── Chapter 1 Using LAN Manager with MS-DOS How LAN Manager Works Different Versions of LAN Manager for MS-DOS The Enhanced Version The Basic Version Working with Other Network Products PART II LAN Manager Enhanced ──────────────────────────────────────────────────────────────────────────── Chapter 2 Getting Started Features of LAN Manager The LAN Manager Screen Command-Line Commands Online Help Profiles Services Starting LAN Manager Enhanced Starting the Workstation Service and Logging On The LAN Manager Screen Using Menus and Menu Commands Using Dialog Boxes Getting Online Help Getting Help with the LAN Manager Screen Getting Help from the Command Line Getting Help with Error Messages Viewing Network Resources Setting the Current Focus Viewing Shared Resources Viewing Users on the Network Understanding LAN Manager Accounts Viewing Information About User Accounts Changing Your Password Exiting the LAN Manager Screen Quitting LAN Manager Enhanced Logging Off from the Network Stopping the Workstation Service Starting LAN Manager Enhanced Automatically The LANMAN.INI File Chapter 3 Using Shared Directories Viewing Shared Directories Connecting to a Shared Directory Connecting to a Shared Directory Without Setting the Focus Making a Onetime Connection to a Shared Directory Viewing Your Connections Copying Files over the Network Moving Files over the Network Disconnecting from a Shared Directory Using Home Directories Chapter 4 Using Shared Printers Printer Queues Viewing Printer Queues and Print Jobs Connecting to a Printer Queue Connecting to Printer Queues Without Setting the Focus Making a Onetime Connection to a Printer Queue Viewing Your Connections Printing over the Network Holding, Releasing, and Deleting a Print Job Disconnecting from a Shared Printer Queue Chapter 5 Sending and Receiving Messages Sending Messages Reading Messages Using the Netpopup Service Reading Your Message Log Specifying a Different Message Log Stopping and Starting Message Logging Printing Messages Using Aliases Adding an Alias Deleting an Alias Chapter 6 Customizing Your Workstation Using Profiles Creating a Profile Loading a Profile Controlling Services Pausing a Service Continuing a Service Pausing and Continuing Connections to Resources Stopping the Workstation Service Adjusting Services Viewing the Workstation Configuration Chapter 7 Enhanced Command Reference Abbreviating Commands Using /yes and /no Options Using Passwords with Commands Controlling a Screen Display Using Commands in Batch Files Command Summary Net Net Access Net Config Workstation Net Continue Net Copy Net Help Net Helpmsg Net Load Net Log Net Logoff Net Logon Net Move Net Name Net Password Net Pause Net Print Net Save Net Send Net Start Messenger Net Start Netpopup Net Start Workstation Net Stop Net Time Net Use Net View Net Who PART III LAN Manager Basic ──────────────────────────────────────────────────────────────────────────── Chapter 8 Using LAN Manager Basic Starting LAN Manager Basic Getting Help Using Shared Directories Connecting to a Shared Directory Using MS-DOS Commands with Shared Directories Disconnecting from a Shared Directory Using Shared Printers Connecting to a Shared Printer Queue Printing over the Network Viewing the Status of a Print Job Disconnecting from a Shared Printer Queue Listing Connections to Network Resources Pausing and Continuing Connections Chapter 9 Basic Command Reference Command Summary Net Continue Net Help Net Name Net Pause Net Print Net Start Workstation Net Use Appendix A Menu Commands The LAN Manager Screen View Menu Message Menu Config Menu Accounts Menu Help Menu Appendix A Country Codes Glossary Index Before You Begin ──────────────────────────────────────────────────────────────────────────── The Microsoft(R) LAN Manager User's Guide for MS-DOS(R) is for new and experienced users of Microsoft LAN Manager for the MS-DOS operating system. It describes how to use LAN Manager commands for the Enhanced and Basic versions and the LAN Manager Screen for the Enhanced version. This manual assumes that you know how to use a personal computer and that you are familiar with MS-DOS. If you are not familiar with MS-DOS, see your MS-DOS manual(s). Before using this manual, you should read Getting To Know Microsoft LAN Manager to learn terms and concepts specific to a local-area network and to LAN Manager. How To Use This Manual This manual is divided into three parts: Part 1, "Overview" Part 1 explains how a local-area network works and the differences between the two versions of LAN Manager for MS-DOS─Enhanced and Basic. You should read this part if you are not familiar with LAN Manager. Part 2, "LAN Manager Enhanced" Part 2 describes how to use LAN Manager Enhanced to perform network tasks from the LAN Manager Screen and from the command line. It explains how to use shared directories and shared printers, send messages to other network users, and customize your workstation. It also provides reference information for each LAN Manager Enhanced command typed at the MS-DOS prompt. You should read this part to learn how to use LAN Manager Enhanced. Part 3, "LAN Manager Basic" Part 3 describes how to use LAN Manager Basic to perform network tasks from the command line. It explains how to use shared directories and shared printers and provides reference information for each LAN Manager Basic command. You should read this part to learn how to use LAN Manager Basic. Notational Conventions This manual uses different type styles and special characters for different purposes: ╓┌─────────────────────────────────┌─────────────────────────────────────────╖ Convention Use ──────────────────────────────────────────────────────────────────────────── Bold Represents commands, command options, and file entries. Type the words exactly as they appear, for example, net use. Convention Use ──────────────────────────────────────────────────────────────────────────── Italic Introduces new terms and represents variables. For example, the variable computername indicates that you supply the name of a workstation or server. Monospace Represents examples, screen displays, program code, and error messages. FULL CAPS Represent filenames and pathnames in text. You can, however, type entries in uppercase or lowercase letters. SMALL CAPS Represent key names (such as CTRL or F2). KEY+KEY Indicates that you must press two keys at the same time. For example, "Press CTRL+Z" means to hold down CTRL and press Z. Convention Use ──────────────────────────────────────────────────────────────────────────── press Z. {braces} Enclose required items in syntax statements. For example, {yes | no} indicates that you must specify yes or no when using the command. Type only the information within the braces, not the braces themselves. [brackets] Enclose optional items in syntax statements. For example, [password] indicates a password may be needed with the command. Type only the information within the brackets, not the brackets themselves. | (vertical bar) Separates items within braces or brackets. For example, {/hold | /release | /delete} indicates that only one of Convention Use ──────────────────────────────────────────────────────────────────────────── | /delete} indicates that only one of the three options can be used. ... (ellipsis) In syntax statements, indicates that you can repeat the previous item(s). For example, /route:devicename[,...] indicates that you can specify more than one device, putting a comma between the devicenames. <Command> Indicates a command button to be chosen within a dialog box. ──────────────────────────────────────────────────────────────────────────── (continued) Indicates the procedure for performing a task using the LAN Manager Screen. Command Indicates the procedure for performing a task using LAN Line Manager commands at the MS-DOS prompt. Finding Further Information This manual is written for LAN Manager for MS-DOS users. In addition to this manual, the LAN Manager manual set includes the following: Getting To Know Microsoft LAN Manager Gives first-time network users an introduction to local-area networks and to LAN Manager. Microsoft LAN Manager User's Guide for MS OS/2 Provides guide and reference information about using LAN Manager on Microsoft Operating System/2 (MS(R) OS/2) workstations. Microsoft LAN Manager Installation Guide Provides information about installing LAN Manager software and using the Setup program to configure workstations and servers. Microsoft LAN Manager Administrator's Guide Provides detailed information about administering a LAN Manager network. Microsoft LAN Manager Administrator's Reference Provides reference information about LAN Manager commands and utilities for MS OS/2 computers, and about the LAN Manager program directory and initialization file. Microsoft LAN Manager Network Device Driver Guide Provides information about network device drivers that can be used with LAN Manager. Microsoft LAN Manager Programmer's Reference Provides information about LAN Manager application program interfaces (APIs). (This manual is optionally available.) Quick references are also available for users and administrators. PART I Overview ──────────────────────────────────────────────────────────────────────────── Part 1 introduces LAN Manager for MS-DOS. It describes how a local-area network works and explains the differences between the two versions of LAN Manager for MS-DOS─Enhanced and Basic. Chapter 1 Using LAN Manager with MS-DOS ──────────────────────────────────────────────────────────────────────────── This chapter describes LAN Manager for MS-DOS and explains the differences between LAN Manager Enhanced and LAN Manager Basic. Read this chapter to gain a general understanding of LAN Manager for MS-DOS. To learn specifics about each version of LAN Manager for MS-DOS, see Part 2, "LAN Manager Enhanced," or Part 3, "LAN Manager Basic." How LAN Manager Works LAN Manager expands the features of MS-DOS to let your computer join a local-area network. A local-area network is a group of personal computers that can communicate with each other and share resources. A LAN Manager network is comprised of workstations and servers. Workstations are computers that can use information and equipment on the network. Your workstation runs MS-DOS; others on the network can run MS-DOS or MS OS/2. Servers are computers that control information and equipment that workstations use. A server can also be used as a workstation. A server runs MS OS/2. Information and equipment are made available to you and other network users through a process called sharing. The servers on a network share resources─directories and printers─with network users at workstations. You can use a shared resource by connecting your workstation to the server sharing the resource. The resource is then used as though it were attached to your computer, even if it is actually located down the hall or in another part of the building. The person who maintains the network is called an administrator. A network can have one or more administrators. Administrators share resources at servers and handle network security. If you need a password to connect to a shared resource or if you have trouble using your workstation, ask your administrator for help. Different Versions of LAN Manager for MS-DOS Two versions of LAN Manager for MS-DOS─Enhanced and Basic─are available for a workstation. If you are not sure which version your computer is running, ask your administrator. The Enhanced Version LAN Manager Enhanced features the LAN Manager Screen, a full-screen interface that lets you use shared resources and perform other network tasks. With LAN Manager Enhanced, you can ■ Use LAN Manager Screen menus and dialog boxes, or type LAN Manager Enhanced commands from the MS-DOS command line, to perform network tasks ■ Get online help with the LAN Manager Screen and command-line commands ■ Display the contents of printer queues and control print jobs in a queue ■ Move and copy files between any two directories on the network ■ Send messages to and receive messages from other users ■ Create a customized set of network connections─ called a profile─which lets you connect to several resources with one command To learn how to use LAN Manager Enhanced, see Part 2, "LAN Manager Enhanced." The Basic Version LAN Manager Basic is used by typing commands at the MS-DOS prompt. With LAN Manager Basic, you can ■ Add your computer to a network ■ Use shared disk drives, directories, files, and printers ■ Get online help ■ Display the contents of printer queues ■ Pause and continue connections to network resources To learn how to use LAN Manager Basic, see Part 3, "LAN Manager Basic." Working with Other Network Products LAN Manager software works with products outside the LAN Manager family. For example, computers running MS-Net or XENIX(R) network software can share resources with LAN Manager workstations. Figure 1.1 shows a network with mixed products. (This figure may be found in the printed book). PART II LAN Manager Enhanced ──────────────────────────────────────────────────────────────────────────── Part 2 explains how to use a LAN Manager Enhanced workstation to perform network tasks. It describes how to start and stop the workstation, log on to and log off from the local-area network, get help, and use the LAN Manager Screen. It also describes procedures for using shared resources, sending and receiving messages, and customizing your workstation. Additionally, LAN Manager Enhanced commands typed at the MS-DOS prompt are explained in detail. Chapter 2 Getting Started ──────────────────────────────────────────────────────────────────────────── This chapter introduces LAN Manager Enhanced, and explains how to start your workstation and log on to the network. The LAN Manager Screen is described, with instructions for moving around the screen using the keyboard and the mouse. Information is provided about getting help with commands and error messages, viewing network resources, and understanding user accounts. This chapter ends with an explanation of how to exit the LAN Manager Screen and quit LAN Manager Enhanced. If LAN Manager Enhanced hasn't been installed on your computer, contact your administrator. The procedures in this chapter are described using the LAN Manager Screen, followed by the equivalent command you type at the MS-DOS prompt. Each LAN Manager Enhanced command is discussed in detail in Chapter 7, "Enhanced Command Reference." Features of LAN Manager This section introduces some of the features of LAN Manager Enhanced, including the LAN Manager Screen, commands, online help, profiles, and services. The LAN Manager Screen The LAN Manager Screen is a menu-oriented, full-screen interface that allows you to use LAN Manager without memorizing command syntax. Most network tasks can be performed with the LAN Manager Screen. The LAN Manager Screen is displayed in Figure 2.1. Command-Line Commands In addition to using the LAN Manager Screen to perform network tasks, you can also type LAN Manager commands at the MS-DOS prompt. (This can be done by exiting the LAN Manager Screen.) Chapters 3-6 describe procedures for performing network tasks with the LAN Manager Screen, followed by the equivalent command-line command. For tasks that cannot be performed using the LAN Manager Screen, the command-line command is discussed in more detail. For detailed information about all typed LAN Manager Enhanced commands, see Chapter 7, "Enhanced Command Reference." Online Help Help is available both from the LAN Manager Screen and from the MS-DOS command line. The LAN Manager Screen provides context-sensitive help on most topics. From any dialog box, you can get help with the dialog box as well as many associated functions and terms. Profiles LAN Manager allows you to make connections to shared resources, then save a record of these connections in a file called a profile. You can use this profile to automatically reestablish the connections. Connections specified in a profile can replace existing connections or be added to them. For information about creating and using profiles, see Chapter 6, "Customizing Your Workstation." Services A service is a program that performs one of the major functions of LAN Manager. Major services are the following: Workstation The Workstation service is the primary service for a workstation. If the Workstation service isn't running, no other service can run. Once you start the Workstation service and log on, you can use the network and gain access to shared resources. Messenger The Messenger service lets you receive messages from other network users or from LAN Manager Enhanced (for example, when your print job has been printed). You can use message logging to save these messages in a file. For more information about the Messenger service, see Chapter 5, "Sending and Receiving Messages." Netpopup The Netpopup service displays messages on your screen as they arrive from other users or from LAN Manager Enhanced. For more information about the Netpopup service, see Chapter 5, "Sending and Receiving Messages." Starting LAN Manager Enhanced Starting LAN Manager Enhanced involves two separate tasks: ■ Starting the Workstation service ■ Logging on to the network When you start the Workstation service, software that lets you use shared resources and send and receive messages is loaded into your computer's memory. Logging on identifies you on the network and establishes you as the user of the workstation. When you log on, you supply your username and password, which identify you as a member of a domain. A domain is a group of computers and users on the network. Domains keep the network organized and simplify administration. They have names, just like workstations and servers. When you log on, you automatically log on in the workstation domain. You don't need to specify the workstation domain name; it is specified in the LAN Manager Enhanced software. You can override the workstation domain by supplying the name of a different domain in which to log on. This domain is called the logon domain. A server called the primary domain controller or a logon server verifies that you are allowed to log on in a domain. On this server, the administrator maintains a record of user accounts, which define the hours that each user can log on and the access that he or she has to resources in the domain. Starting the Workstation Service and Logging On You must start the Workstation service before you can log on to the network or use the LAN Manager Screen. To start the Workstation service, at the MS-DOS prompt, type net start workstation Once the Workstation service is started, you must log on. The procedure for logging on using the LAN Manager Screen is given first, followed by the equivalent command typed from the command line. To log on: 1. Start the LAN Manager Screen from the command line by typing net ──────────────────────────────────────────────────────────────────────────── NOTE Typing net /mono improves the LAN Manager Screen display for some computer screens. Try the command with and without /mono to determine which display you The following message box appears: (This figure may be found in the printed book). Your username should appear in the "Username" text box. If it is not displayed, see your administrator. You can specify a different username by typing over the username that is displayed. 2. To move the cursor to the "Password" text box, press TAB, then type your password. The password is not displayed as you type it. 3. To move the cursor to the "Domain" text box, press TAB. Leave this text box blank to log on in the workstation domain. 4. Type a domain name to specify a logon domain. 5. To move to the <OK> command button, press TAB. Press ENTER. Message boxes are displayed telling you that the logon was successful and what privilege level you have at your workstation. The privilege level defines the range of action you have at your workstation or on a server. To remove message boxes from the LAN Manager Screen, press ESC. Along with the Workstation service, LAN Manager Enhanced, by default, starts these other services: ■ The Messenger service, which lets you send, receive, and log messages to a file. ■ The Netpopup service, which displays messages on your computer's screen when they are received from another user or a server on the network. These messages are not part of the LAN Manager Screen; they appear regardless of which application you are using. The Netpopup service requires that the Messenger service be running. These services are described in more detail in Chapter 5, "Sending and Receiving Messages." Command Line To start the Workstation service and log on: 1. Start the Workstation service by typing net start workstation 2. Log on to the network by typing net logon [username [password | *]] [/domain:name] See Net Start Workstation and Net Logon, Chapter 7, "Enhanced Command Reference." The LAN Manager Screen The LAN Manager Screen lets you browse around the network, locate shared resources, and connect to those resources without having to memorize commands or syntax. Figure 2.1 shows the LAN Manager Screen, noting the elements of the screen. (This figure may be found in the printed book). The fields of the LAN Manager Screen provide the following information: Menu bar Displays the names of menus from which you can choose commands. Current focus Shows the computername of your workstation or the server that is the focus of activity when using LAN Manager Screen commands. Workstation information Provides the following information about your workstation: Your username The username specified when you logged on to the network. Your computername The computername specified when the workstation was started. Your domain The name of your logon domain. This is the domain name specified when you logged on to the network. If you didn't specify a domain name, you automatically logged on in the workstation domain. Note that the workstation domain and the logon domain are the same if you are logged on in the workstation domain. Servers in the logon and workstation domains Lists the servers in your logon and workstation domains. Scroll bar Lets you scroll through the servers in the list box with the mouse. Message line Provides a brief statement about the menu, command, or current task. To use the LAN Manager Screen, you select a menu, which displays a list of commands. When you choose a command, a dialog box appears, in which you type information to perform a task. The following sections explain menus and dialog boxes and tell you how to use the keyboard and the mouse to move through them and perform tasks. Using Menus and Menu Commands Menus are the starting point for any LAN Manager Screen operation. The names of all five menus appear in the menu bar across the top of the LAN Manager Screen. When you select a menu, a list of commands appears. Except for Exit on the View menu, each command leads to a dialog box. If a menu command does not contain a highlighted letter, the command is not available. From menus on the LAN Manager Screen, you can perform the following tasks: View menu View and connect to resources shared on servers, view your workstation's connections, and view information about users on the network. You can also exit the LAN Manager Screen. Message menu Send, log, and read messages, and specify an alias (a name used to receive messages). Config menu Log on, log off, use profiles, and view your workstation configuration. Accounts menu Change the options for your account and change your password at a server. Help menu Get different types of help with LAN Manager Enhanced. When viewing or selecting menus and menu commands, use these keys: ╓┌───────────────────┌───────────────────────────────────────────────────────╖ Key Action ──────────────────────────────────────────────────────────────────────────── Key Action ──────────────────────────────────────────────────────────────────────────── ALT Activates menu names on the menu bar. Highlighted letter Once menu names are activated with ALT or menu commands are displayed, selects the menu or chooses the menu command containing the highlighted letter. Once a menu is displayed, moves from one menu to another. Once a menu is displayed, moves from one command to another. ENTER Selects the highlighted menu or menu command. ESC Removes a menu from the screen. ──────────────────────────────────────────────────────────────────────────── To select a menu with the mouse, click the menu name (use the mouse to position the pointer on the menu name and press the left mouse button). The menu appears, and you can choose a menu command by clicking it. Using Dialog Boxes Dialog boxes supply information to perform a task. They contain as many as five types of areas, or fields. Each dialog box has a title, which is displayed at the top. Dialog Box Fields Dialog boxes contain one or more of the following types of fields: ■ Text boxes, which receive typed information ■ List boxes, which present a list of items to select from ■ Check boxes, which let you mark or unmark an option ■ Option buttons, which let you select one of several options ■ Command buttons, which perform an action Figure 2.2 shows a dialog box with four types of fields. (This figure may be found in the printed book). Use the following keys to move around in dialog boxes: ╓┌─────────────────────────────────┌─────────────────────────────────────────╖ Key Action ──────────────────────────────────────────────────────────────────────────── Highlighted letter Moves the cursor to the field containing the highlighted letter. If the cursor is in a list box or a text box, hold down ALT while pressing the highlighted Key Action ──────────────────────────────────────────────────────────────────────────── ALT while pressing the highlighted letter. If moving to a command button, pressing the highlighted letter activates the command button. TAB Moves the cursor to the next field. SHIFT+TAB Moves the cursor to the previous field. ENTER Carries out the actions you specified. ESC Cancels any actions and closes the dialog box. ──────────────────────────────────────────────────────────────────────────── The following sections describe each type of dialog box field. Text Boxes - In a text box, you type information. A text box is surrounded by brackets and contains a series of dots that are replaced with characters as you type. It sometimes holds more characters than appear between the brackets. You can view these characters by using the RIGHT direction key to scroll to the left. Sometimes a text box may appear with information provided, such as your username. When in a text box, use the following keys: ╓┌───────────┌───────────────────────────────────────────────────────────────╖ Key Action ──────────────────────────────────────────────────────────────────────────── Moves the cursor one space to the left. Moves the cursor one space to the right. HOME Moves the cursor to the first character in the text box. END Moves the cursor to the last character in the text box. DEL Deletes the character that the cursor is on. BACKSPACE Deletes the character to the left of the cursor. ──────────────────────────────────────────────────────────────────────────── If you are using the mouse, you can scroll the characters in the text box by clicking the left or right bracket. List Boxes - A list box lets you view items by scrolling through a list, or select an item from the list. For example, you can view lists of resources available on a server or lists of print jobs waiting to be printed. Use the following keys to move around in a list box: ╓┌─────────────────────────────────┌─────────────────────────────────────────╖ Key Action ──────────────────────────────────────────────────────────────────────────── Moves the cursor up one line. Moves the cursor down one line. PG UP Moves the cursor up one page. (A page is the portion of the list that appears on the screen.) Key Action ──────────────────────────────────────────────────────────────────────────── PG DN Moves the cursor down one page. HOME Moves the cursor to the top of the list. END Moves the cursor to the bottom of the list. F5 Updates a list. ──────────────────────────────────────────────────────────────────────────── Pressing a letter while the cursor is in a list box (including the list box of server names on the LAN Manager Screen) moves the cursor to the next item that begins with that letter. A scroll bar and a scroll box are displayed at the right of the list box. The scroll bar lets you use the mouse to move through a list with more than one screen of information. Click the up or down arrow to move the view up or down one line. The position of the scroll box reflects the position of the information in the window relative to the total contents of the list. You can move through the list with the mouse by dragging the scroll box (positioning the pointer on the scroll box, holding the left mouse button down, then moving the mouse up or down). To select an item in a list box with the mouse, click the item. If the dialog box has a <Zoom> command button, double-clicking an item (positioning the pointer on the item and quickly pressing and releasing the mouse button twice) zooms in on it. Otherwise, double-clicking performs the action corresponding to the first command button listed. If a dialog box has a pair of list boxes, double-clicking an item in one list box often moves it to the other list box. Check Boxes - With a check box, you turn an option on or off. When a check box is marked with an X, the option is on. Use the SPACEBAR as a toggle switch to mark or unmark a check box. To mark or unmark a check box with the mouse, click it. Option Buttons - With an option button, you select one option from a group of options. One option button is always selected, and only one option button can be selected at a time. To select an option button, use the following keys: Key Action ──────────────────────────────────────────────────────────────────────────── Changes the selection to the previous option. Changes the selection to the next option. ──────────────────────────────────────────────────────────────────────────── To select an option button with the mouse, click it. Command Buttons - A command button performs a specific action. If a command button does not contain a highlighted letter, the command button is unavailable. To choose a command button, press TAB to move to the button and press ENTER. You can also press the highlighted letter in the command button (if the cursor is in a list box or text field, you must hold down ALT while pressing the highlighted letter). To choose a command button with the mouse, click it. Getting Online Help Online help is available for the LAN Manager Screen and for LAN Manager Enhanced commands typed at the MS-DOS prompt. Getting Help with the LAN Manager Screen There are two ways to get help while using the LAN Manager Screen: by selecting the Help menu or by pressing F1. The Help menu provides access to help topics. To get information about a menu, command, or dialog box, press F1 while that item is displayed.If you press F1 with no dialog box or menu displayed, the following appears: (This figure may be found in the printed book). To remove a help box from the screen, choose <Done> or press ESC. Getting Help from the Command Line Several types of help are available from the command line. Command Line To get a list of commands and topics for which help is available, type net help To display detailed information about a command, type net help command To display a command's options, type net help command /options To display a command's syntax, type net command /? See Net Help, Chapter 7, "Enhanced Command Reference." Getting Help with Error Messages To get help with an error that occurs while you are using the LAN Manager Screen, press F1 while the message box is displayed. Command Line To get help with an error message, type net helpmsg message# See Net Helpmsg, Chapter 7, "Enhanced Command Reference." Viewing Network Resources With the View menu, you can view servers and shared resources on the network, and view users on a server or in a domain. After you log on, a list of visible servers in your workstation domain (and your logon domain, if a domain other than the workstation domain was specified at logon) is displayed on the LAN Manager Screen. You may not have access to all servers listed, and all servers you have access to may not be visible. Your administrator determines whether a server is visible on the network. Check with your administrator to find out which servers are available to you. Setting the Current Focus When you start the LAN Manager Screen, the "Current focus" line and the "Set current focus on" text box display your workstation's computername. This means the workstation is the focus of activity when you use menus and dialog boxes. Using the LAN Manager Screen, you can connect to shared resources and perform other tasks at servers. The first step in performing a task is to set the current focus on the server that is showing the resources you want to view or use. This makes the server the focus of activity. To set the current focus on a server: 1. Select the computername of a server by scrolling through the list box or pressing the first letter of the server's computername until the name appears in the "Set current focus on" text box. Or you can type the server's computername in the "Set current focus on" text box. 2. Press ENTER, or double-click the server name. The server's computername is then displayed on the "Current focus" line, and a message box is displayed that shows your privileges on that server. Viewing Shared Resources After setting the current focus on a server, you can view that server's shared resources. Shared resources are directories and printers. To view shared resources on a server: 1. Set the current focus on the server that you want to view. 2. From the View menu, choose Available resources. The following dialog box appears: (This figure may be found in the printed book). The dialog box shows the different types of resources available on that server. Available resources include shared directories (Disk) and printers (Printer). 3. Choose <Done>. For more information about connecting to and using shared resources, see Chapter 3, "Using Shared Directories," and Chapter 4, "Using Shared Printers." Command Line To view shared resources on a server, type net view \\computername See Net View, Chapter 7, "Enhanced Command Reference." Network Paths Every shared resource on the network is identified by a network path. This is the computername of the server sharing the resource followed by the resource's sharename─the name an administrator assigns to it. The computername is preceded by two backslashes (\\), and the sharename is preceded by one backslash (\). For example, \\SALES\REPORTS specifies the network path for the REPORTS shared directory on the \\SALES server. Network paths are used in dialog boxes and in commands typed at the MS-DOS prompt. Viewing Users on the Network You can view a list of users whose workstations are connected to a particular server or who are logged on in a particular domain. To view information about users connected to a server: 1. Set the current focus on the server that you want to view. 2. From the View menu, choose Users on a server. The dialog box shown in Figure 2.3 appears. (This figure may be found in the printed book). For each user with a connection to the server, this dialog box lists the username, the computername of the workstation where the user is logged on, the length of time since the connection was established, and the user's full name. 1. To view more information about a user, in the list box, select the username and choose <Zoom>. The dialog box shown in Figure 2.4 appears. (This figure may be found in the printed book). 2. Choose <Done>. 3. Choose <Done>. Command Line To view information about users connected to a server, type net who \\computername See Net Who, Chapter 7, "Enhanced Command Reference." To view users logged on in a domain: 1. From the View menu, choose Users on a domain. The following dialog box appears: (This figure may be found in the printed book). 2. In the "Known domains" list box, select a domain and choose <OK>. A dialog box appears that lists the users logged on in that domain. The fields contain the same types of information as those shown in the "Current Users on Server \\computername" dialog box (Figure 2.3). 3. To view information about a user, in the list box, select the username and choose <Zoom>. More information about the user appears in the "Information on user username" dialog box (Figure 2.4). 4. Choose <Done>. 5. Choose <Done>. Command Line To view users logged on in a domain, type net who /domain:name See Net Who, Chapter 7, "Enhanced Command Reference." Understanding LAN Manager Accounts LAN Manager uses user accounts to control access to domains and shared resources. These accounts contain information about users. In a domain, accounts specify which users can log on. On a server, accounts specify which users can use shared resources. In a domain, your account includes the username and password that you must supply to log on, your full name, a comment about you, and a record of the hours during which you can log on. When you log on in a domain, the domain controller or a logon server verifies that the username and password you supply match those in an existing user account. An account on a server includes your username and the password you must supply to gain access to the server's resources. If the password you supplied when you logged on matches the password in a server's account, you can use the server's resources. Otherwise, you must supply a password when connecting to a resource to gain access. Note that having an account on a server does not guarantee access to all of its resources. Your administrator can set up permissions for each user to control access to each of the server's resources. Viewing Information About User Accounts You can view information about your account, such as your username, account privileges, date of last logon, and logon times. To view information about your user account: 1. To view information about your account in the logon domain, set the current focus on your workstation, or to view information about your account at a server, set the current focus on that server. 2. From the Accounts menu, choose Your account. The following dialog box appears: (This figure may be found in the printed book). If the current focus is set on your workstation, the computername displayed in the dialog box title is that of the primary domain controller. Except for the "User comment" and "Country code" fields, the information in this dialog box cannot be changed. The "User comment" text box lets you enter a comment about yourself that others can read, such as your office location or phone extension. This comment is displayed after your name in the "Information on user username" dialog box (Figure 2.4) under the Users on a server or Users on a domain command in the View menu. It is also displayed when you type net who username from the command line. The "User comment" field can have as many as 48 characters. The "Country code" number specifies the language in which servers send messages to you. For more information about country codes, see Appendix B, "Country Codes." 3. Choose <Logon times>. The following dialog box appears: (This figure may be found in the printed book). This dialog box displays the times during which you can use the server's resources. Your administrator determines these times. You cannot edit any of the fields. 4. Choose <Done>. 5. Choose <OK>. Changing Your Password You may need to change your password for an account if, for example, it is nearing expiration. LAN Manager alerts you when your password is expired. See your administrator if you forget a password. To change your password: 1. To change your password in your logon domain account, set the current focus on your workstation, or to change your password on a server, set the current focus on that server. 2. From the Accounts menu, choose Change your password. The following dialog box appears: (This figure may be found in the printed book). 3. In the "Old password" text box, type your current password. 4. In the "New password" text box, type your new password. 5. Choose <OK>. Command Line To change your password, type net password [[\\computername | /domain:name] username oldpassword newpassword] See Net Password, Chapter 7, "Enhanced Command Reference." Exiting the LAN Manager Screen Exiting the LAN Manager Screen returns you to the MS-DOS prompt but does not log you off from the network or stop LAN Manager Enhanced services. You can still use the connections you made from the LAN Manager Screen. To exit the LAN Manager Screen: 1. Press ESC to close each open dialog box. 2. Press F3, or from the View menu, choose Exit. The LAN Manager Screen disappears, and the MS-DOS prompt appears on your computer's screen. To restart the LAN Manager Screen, type net at the MS-DOS prompt. Quitting LAN Manager Enhanced Quitting LAN Manager Enhanced involves two steps: ■ Logging off from the network ■ Stopping the Workstation service Logging Off from the Network Logging off removes your username and password from the workstation and cancels any existing connections to shared resources, but it does not stop LAN Manager Enhanced services. Log off when you won't be using the workstation for a while. That way, no one can use your network identity to use resources to which you have access. To log off from the network: 1. From the Config menu, choose Log off from LAN. If you have any connections, the following message box appears: (This figure may be found in the printed book). 2. To continue logging off, choose <OK>. The following message box appears: (This figure may be found in the printed book). 3. Choose <OK>. Once logged off, you can't use any shared resources. However, the Workstation service is still running. Command Line To log off from the network, type net logoff See Net Logoff, Chapter 7, "Enhanced Command Reference." Stopping the Workstation Service When you stop the Workstation service, all network services are stopped and connections to the network are ended. You must restart the Workstation service and log on if you want to use the network again. Alternatively, the workstation can be paused, which is similar to stopping the workstation but doesn't cancel connections. Pausing puts the workstation on hold but keeps your username and password active. It also pauses any other services, such as Messenger or Netpopup, that are running. See Chapter 6, "Customizing Your Workstation," for more information about pausing services. Stopping the Workstation service stops all other services and removes software from your computer's memory. LAN Manager Enhanced is a "Terminate and Stay Resident" program, which means that when it stops, some of the software stays in your computer's memory. If other TSR programs are loaded into your computer's memory, the net stop command may not work. Command Line To stop the Workstation service, type net stop workstation See Net Stop, Chapter 7, "Enhanced Command Reference." Starting LAN Manager Enhanced Automatically LAN Manager Enhanced commands that can be typed at the MS-DOS prompt can be put in batch files so that they run automatically. For example, to start the Workstation service when you start your computer, put the following command in the AUTOEXEC.BAT file: net start workstation ──────────────────────────────────────────────────────────────────────────── NOTE To maintain network security, do not put your passwords in a batch program. ──────────────────────────────────────────────────────────────────────────── To learn more about batch programs, see your MS-DOS manual(s). For more information about LAN Manager Enhanced commands, see Chapter 7, "Enhanced Command Reference." The LANMAN.INI File As you work with LAN Manager Enhanced, you'll see that many aspects of your workstation's performance are predefined. For example, when you start the LAN Manager Screen, your username probably appears in the "Log Onto Network" dialog box. Likewise, your workstation is set up to include a computername, workstation domain, and so on. These features or settings are defined in a file called LANMAN.INI, which resides in the LANMAN.DOS directory. LANMAN.INI is an initialization file that contains an entry with a default value for each setting (such as the computername). You can change settings temporarily by using the net start command. To change them permanently, edit the LANMAN.INI file. You normally won't need to adjust LANMAN.INI entries. For information about adjusting entries, see your administrator. The LANMAN.INI file is discussed in Chapter 6, "Customizing Your Workstation." Settings and values are defined in the Microsoft LAN Manager Administrator's Reference. Chapter 3 Using Shared Directories ──────────────────────────────────────────────────────────────────────────── A shared directory is a disk directory on a server to which users of the network have access. A shared directory contains files that are available to network users. Using a shared directory, one person can write a report, another person can review it, and a third person can format and print it, all without passing a floppy disk around the office. This chapter explains how to use shared directories. It includes procedures for viewing, connecting to, and disconnecting from a shared directory, and seeing which shared directories your workstation is connected to. In addition, the command-line syntax for moving and copying files over the network is provided. Viewing Shared Directories To see which shared resources are available to you, the Workstation service must be running and you must be logged on to the network. For information about starting the Workstation service and logging on, see Chapter 2, "Getting Started." The LAN Manager Screen displays a list of visible servers. This includes servers in the workstation domain, logon domain, and other domains (if any) specified in the LANMAN.INI file. To view shared directories: 1. Set the current focus on the server whose shared directories you want to view. 2. From the View menu, choose Available resources. The dialog box shown in Figure 3.1 appears. (This figure may be found in the printed book). Shared directories are listed as "Disk" in the "Type" column. 3. Choose <Done>. Command Line To view shared directories, type net view \\computername See Net View, Chapter 7, "Enhanced Command Reference." Connecting to a Shared Directory Connecting to a shared directory allows you to use the directory as if it were another disk drive on your workstation. When you connect to a shared directory, you can use files or programs in that directory. You can also copy a file or a program to the directory for use by others. You usually assign a devicename to the directory. A devicename is a name by which your computer identifies a device. A disk drive devicename is a letter followed by a colon. ──────────────────────────────────────────────────────────────────────────── NOTE If you assign a devicename of a disk drive on your computer (for example, A:), your workstation recognizes the network connection─not the local drive─unless the network connection is paused or disconnected. Avoid assigning the C: devicename. ──────────────────────────────────────────────────────────────────────────── To connect your workstation to a shared directory: 1. Set the current focus on the server with the shared directory you want to use. 2. From the View menu, choose Available resources. The "Resources Available at \\computername" dialog box (Figure 3.1) appears. The list box displays available resources on the server. Directories are listed as "Disk" in the "Type" column. 3. In the list box, select the directory to which you want to connect. 4. Choose <Use resource>. The following dialog box appears: (This figure may be found in the printed book). LAN Manager Enhanced provides the next available devicename in the "Local device" text box, but you can type a different one. 5. In the "Password" text box, type a password if needed. 6. Choose <OK>. 7. Choose <Done>. The workstation is now connected to the directory you selected. You can use it the same way you use your workstation's disk drives, as shown in Figure 3.2. (This figure may be found in the printed book). Connecting to a Shared Directory Without Setting the Focus The LAN Manager Screen allows you to connect your workstation to shared directories on servers other than the server of current focus. This includes servers that are not visible on the LAN Manager Screen and servers in other domains. LAN Manager Enhanced also lets you connect your workstation to servers on the network that are not running LAN Manager (for example, XENIX servers). Because these servers have different interfaces, their computernames do not appear on the LAN Manager Screen. To connect to a directory on a server other than the server of current focus: 1. From the View menu, choose Used resources. The dialog box shown in Figure 3.3 appears. (This figure may be found in the printed book). 2. Choose <Add use>. The following dialog box appears: (This figure may be found in the printed book). LAN Manager Enhanced has preselected "Disk" in the "Type of Use" box. LAN Manager Enhanced provides the next available devicename in the "Local device" text box, but you can type a different one. 3. In the "Network resource" text box, type the network path of the shared directory. 4. In the "Password" text box, type a password if needed. 5. Choose <OK>. 6. Choose <Done>. Command Line To connect to a directory on a server other than the server of current focus, type net use devicename \\computername\sharename [password] See Net Use, Chapter 7, "Enhanced Command Reference." Making a Onetime Connection to a Shared Directory You can use a shared directory without assigning a devicename to the connection. Do this from the command line by using the network path as part of a pathname with some commands or application programs. For example, to use Microsoft Word to edit the LIST.DOC file in the shared directory with the network path \\SALES\FARWEST, start Word and load the file by typing word \\sales\farwest\list.doc The Word program loads the shared file even though you haven't made a previous connection to \\SALES\FARWEST. Note that this procedure will not work if a password is needed to gain access to \\SALES\FARWEST. If so, you must first establish access to the directory. Viewing Your Connections At any time, you can view directories connected to your workstation. To view directories connected to your workstation: 1. From the View menu, choose Used resources. The "Resources in Use by username at \\computername" dialog box (Figure 3.3) appears. Devicenames D: through Z: in the "Device" column identify connections to shared directories. (Please refer to the printed book) 2. Choose <Done>. Command Line To view directories connected to your workstation, type net use See Net Use, Chapter 7, "Enhanced Command Reference." Copying Files over the Network Use the net copy command to copy a file over the network, to or from your workstation, or between servers. The MS-DOS copy command can be used in place of net copy, but net copy is faster when both the source and destination are on the same server. Files can be copied from the command line only. Command Line To copy a file, type net copy source [destination] For example: net copy \\production\lists\sales.doc \\production\reports See Net Copy, Chapter 7, "Enhanced Command Reference." Moving Files over the Network Use the net move command to move a file over the network, to or from your workstation, or between servers. Files can be moved from the command line only. The net move command differs from the net copy command in that it deletes the file at its source location when it moves the file. Command Line To move a file, type net move source [destination] If no destination is specified, the file moves to the current directory. See Net Move, Chapter 7, "Enhanced Command Reference." Disconnecting from a Shared Directory You can disconnect your workstation from a shared directory when you are finished using a resource or when you want to use the devicename for a different connection. To disconnect your workstation from a shared directory: 1. From the View menu, choose Used resources. The "Resources in Use by username at \\computername" dialog box (Figure 3.3) appears. 2. In the list box, select the shared directory that you want to disconnect your workstation from. 3. Choose <Stop using>. 4. When prompted for confirmation, choose <OK>. 5. Choose <Done>. Command Line To disconnect your workstation from a shared directory, type net use devicename /delete See Net Use, Chapter 7, "Enhanced Command Reference." Using Home Directories Your administrator may have set aside a directory on a server for your own personal use. This is your home directory. You can use this directory to create and copy files, create and remove subdirectories, and do anything else that you ordinarily do with a directory on your own computer. You can also set LAN Manager permissions for files and subdirectories, allowing other people to use the contents of your home directory. Your administrator can override the permissions you set since your home directory is part of the server's disk drive. Your administrator also sets a limit on how much disk space you can use for your home directory. For information about permissions, see Net Access in Chapter 7, "Enhanced Command Reference." Chapter 4 Using Shared Printers ──────────────────────────────────────────────────────────────────────────── With LAN Manager you can print files by sending them from your workstation to shared printers. This chapter explains shared printer queues and how to view, connect to, control, and disconnect from a printer queue. Procedures are provided for using a printer queue and for finding out which printer queues your workstation is using. Printer Queues A shared printer is one that is available to network users on a server.LAN Manager Enhanced uses printer queues to hold print jobs.Jobs sent to a printer queue are printed one by one, usually in the order that the queue receives them (see Figure 4.1). (This figure may be found in the printed book). Printer queues can be set up in different ways: one printer can handle jobs from several queues, or one queue can send jobs to several similar printers. If a single printer receives jobs from several queues, the queues can have different priorities for printing. The printer might receive requests from a low-priority queue that accepts jobs from all network users and also from a high-priority queue that accepts jobs only from users who need files printed quickly. If several printers receive jobs from a single queue, the server controlling the queue informs users which printer printed their jobs. If the Messenger and Netpopup services are running on your workstation, a message is displayed when the print job is printed. For information about the Messenger and Netpopup services, see Chapter 5, "Sending and Receiving Messages." Viewing Printer Queues and Print Jobs You may want to view a list of available printer queues to determine where to send a print job or to monitor jobs that you have sent to a particular queue. To view printer queues and their print jobs: 1. Set the current focus on the server sharing the printer queue that you want to view. 2. From the View menu, choose Printer queues. The dialog box shown in Figure 4.2 appears. (This figure may be found in the printed book). For each queue, the name, number of print jobs waiting, and status of the queue are displayed. Each print job is identified with a line containing the username, job number (assigned by the server), size of the job (in bytes), and status of the job. Scroll through the list if necessary. 3. Choose <Done>. Command Line To view printer queues and their print jobs, type net print \\computername See Net Print, Chapter 7, "Enhanced Command Reference." Connecting to a Printer Queue Connecting to a printer queue allows you to use the queue as if it were a printer attached to your computer. You connect your workstation to a printer queue by assigning a devicename to the queue. Devicenames LPT1: through LPT3: are available for printer queues. To connect your workstation to a printer queue: 1. Set the current focus on the server sharing the printer queue that you want to use. 2. From the View menu, choose Available resources. The following dialog box appears: (This figure may be found in the printed book). The list box displays available resources at that server. Printer queues are listed as "Printer" in the "Type" column. 3. Select the printer queue that you want to use. 4. Choose <Use resource>. The following dialog box appears: (This figure may be found in the printed book). LAN Manager Enhanced provides the next available devicename in the "Local device" text box, but you can type a different one. 5. In the "Password" text box, type a password if needed. 6. Choose <OK>. 7. Choose <Done>. Command Line To connect your workstation to a printer queue, type net use devicename\\computername\sharename [password] See Net Use, Chapter 7, "Enhanced Command Reference." Connecting to Printer Queues Without Setting the Focus The LAN Manager Screen allows you to connect your workstation to printer queues on servers other than the server of current focus. This includes servers that are not visible on the LAN Manager Screen and servers in other domains. LAN Manager Enhanced also lets you connect your workstation to servers on the network that are not running LAN Manager. Because these servers have different interfaces, they do not appear on the LAN Manager Screen. To connect to a printer queue on a server other than the server of current focus: 1. From the View menu, choose Used resources. The dialog box shown in Figure 4.3 appears. (This figure may be found in the printed book). 2. Choose <Add use>. The following dialog box appears: (This figure may be found in the printed book). 3. In the "Type of Use" list box, select the "Printer" option button. LAN Manager Enhanced provides the next available devicename in the "Local device" text box, but you can type a different one. 4. In the "Network resource" text box, type the network path of the printer queue. 5. In the "Password" text box, type a password if needed. 6. Choose <OK>. 7. Choose <Done>. Command Line To connect to a shared printer queue, type net use devicename \\computername\sharename [password] See Net Use, Chapter 7, "Enhanced Command Reference." Making a Onetime Connection to a Printer Queue It is not necessary to assign a devicename to a printer queue if you only need to print one file.You can copy the file directly to a printer queue by specifying the network path as the destination of the net copy command. For example, if your current directory contains the PHONE.LST file and you want to send the file to the HOLES printer queue on the \\ADMIN server, type net copy phone.lst \\admin\holes LAN Manager Enhanced connects your workstation to the printer queue and copies the file to the queue for printing. After copying, the connection is canceled. Note that this procedure will not work if a password is needed to gain access to \\ADMIN\HOLES. If so, you must first make a connection to the queue by assigning it a devicename. Viewing Your Connections To view your workstation's connections to printer queues: 1. From the View menu, choose Used resources. The "Resources in Use by username at \\computername" dialog box (Figure 4.3) appears. If you have a connection to a printer queue, you will see an LPT devicename under the "Device" column. 2. Choose <Done>. Command Line To view your workstation's connections to printer queues, type net use See Net Use, Chapter 7, "Enhanced Command Reference." Printing over the Network Once a connection is made, you can use a printer queue as if a printer were attached to your computer. You simply direct the print output to the devicename that you assigned to the queue. Many application programs send their output to LPT1: by default. In addition, you can send a file to be printed with MS-DOS commands by using the devicename assigned to the queue in the syntax for the command, for example: copy report.doc lpt2: or print /d:lpt2 report.doc For more information about using the MS-DOS copy and print commands, see your MS-DOS manual(s). Holding, Releasing, and Deleting a Print Job Holding a print job causes the server to suspend the job until you release it. Deleting a print job removes it from the queue. Your administrator can also hold, delete, or restart a print job if necessary. This can be done if a problem with the printer, such as a paper jam, caused printing to stop. To hold a print job: 1. Set the current focus on the server sharing the queue in which you have a print job. 2. From the View menu, choose Printer queues. The "Print Queues on \\computername" dialog box (Figure 4.2) appears. 3. In the list box, select the print job that you want to hold. Then choose <Hold>. The job remains held until you release it. To release a print job: 1. Set the current focus on the server sharing the queue in which you are holding a print job. 2. From the View menu, choose Printer queues. The "Print Queues on \\computername" dialog box (Figure 4.2) appears. 3. In the list box, select the print job you want to release. Then choose <Release>. 4. Choose <Done>. To delete a print job: 1. Set the current focus on the server sharing the queue in which you have a print job. 2. From the View menu, choose Printer queues. The "Print Queues on \\computername" dialog box (Figure 4.2) appears. 3. In the list box, select the print job you want to delete. Then choose <Delete>. 4. When prompted for confirmation, choose <OK>. 5. Choose <Done>. Command Line To hold, release, or delete a print job: 1. Get the job number by typing net print {\\computername[\sharename] | devicename} 2. Take the desired action by typing net print {\\computername | devicename} job# {/hold | /release | /delete} See Net Print, Chapter 7, "Enhanced Command Reference." Disconnecting from a Shared Printer Queue You can disconnect your workstation from a printer queue when you are finished using the resource or when you want to use the devicename for a different connection. To disconnect your workstation from a printer queue: 1. From the View menu, choose Used resources. The "Resources in Use by username at \\computername" dialog box (Figure 4.3) appears. 2. In the list box, select the printer queue that you want to disconnect your workstation from. 3. Choose <Stop using>. 4. When prompted for confirmation, choose <OK>. 5. Choose <Done>. Command Line To disconnect your workstation from a printer queue, type net use devicename /delete See Net Use, Chapter 7, "Enhanced Command Reference." Chapter 5 Sending and Receiving Messages ──────────────────────────────────────────────────────────────────────────── With LAN Manager Enhanced, you can exchange messages with other network users. In addition, servers can send messages that inform you of conditions that require your attention or of print jobs that are finished. The Messenger service must be started to receive messages from other users and from servers on the network. Messages are stored in a message log. The Netpopup service displays messages as they are received. It displays a message box for one minute on your computer's screen. If the Netpopup service is paused, you can read your messages in the message log. If you are not running the Netpopup service or the Messenger service, you will not be able to read messages that your workstation receives.However, the workstation will emit a beep when a message arrives. This chapter discusses how to use the LAN Manager Enhanced message exchange features. The procedures for sending a message or file, reading and managing your message log, and adding or deleting an alias are provided. Sending Messages The Messenger service does not need to be running for you to send a message. However, it must be running for your workstation to receive messages. You can send a message to an alias on the network or to a domain. An alias is a unique name to which messages can be sent. A workstation can have three kinds of aliases: ■ A computername, which is an alias when the workstation is added ■ An alias added with the Message menu's Alias command or the net name command ■ A username A username is not necessarily included as an alias at a workstation. This is because an alias must be unique on the network, but a user can be logged on at more than one workstation at a time. If a user logs on at several workstations, the username will only be added as an alias to the first workstation at which the user logs on. A domain name is used like an alias for sending messages. Messages sent to a domain name are received by all workstations and servers that specify the domain as the workstation domain. To send a message: 1. From the Message menu, choose Send a typed message. The following dialog box appears: (This figure may be found in the printed book). The "Name" option button is selected. 2. To send a message to a user, in the "Name" text box, specify who is to receive the message. If you are sending to more than one user, separate the names with a space. If you want a copy of the message, you can specify your own alias. 3. To send a message to all users in a domain, select the "Domain" option button, and type the domain name. 4. In the "Message" text box, type your message. Messages sent to all users in a domain cannot exceed 128 characters. 5. Choose <OK>. Command Line To send a message: ■ Send a message with one line by typing net send alias message ■ Send a message with multiple lines by typing net send alias message (line 1) message (line 2) [...] When you finish, press ENTER, then F6 (or CTRL+Z), then ENTER again. ■ Send a file as a message by typing net send alias <filename ──────────────────────────────────────────────────────────────────────────── NOTE Limit your file to 256 bytes, which is approximately one-quarter of a screen of text. If the file is larger, the message may not be received.<$Messages;size limit for files sent as See Net Send, Chapter 7, "Enhanced Command Reference." Reading Messages There are two ways to read messages: through the Netpopup service or through the message log. To receive messages, you must have the Messenger service running. If you want to see messages as they arrive, the Netpopup service must also be running.These services, by default, are started when the Workstation service is started. A message log is a file that stores messages when they're received. The default message log file resides in the LANMAN.DOS\LOGS directory. Using the Netpopup Service When the Netpopup service is running, each new message is displayed in a message box on your screen. The Messenger service must be running for the Netpopup service to display messages. The following is a typical message box: (This figure may be found in the printed book). To remove the message box from the screen, press ESC. (Otherwise, the message box is displayed for one minute, then disappears.) ──────────────────────────────────────────────────────────────────────────── NOTE The Netpopup service requires that the Winpopup service be running if you are using Microsoft Windows(tm) with LAN Manager Enhanced. The Winpopup service is installed with the Setup program. If you are using Microsoft Windows and the Winpopup service is not installed, see your administrator. Command Line ──────────────────────────────────────────────────────────────────────────── To pause or continue the Netpopup service, type net pause netpopup net continue netpopup See Net Pause and Net Continue, Chapter 7, "Enhanced Command Reference." Reading Your Message Log A message log is a file that stores the workstation's messages. By default, LAN Manager Enhanced uses MESSAGES.LOG in the LANMAN.DOS\LOGS directory for the message log. If the workstation receives messages for more than one user or alias, all messages are stored in the same message log. New messages are appended to the log. To read your message log: 1. From the Message menu, choose Read message log file. The following dialog box appears: (This figure may be found in the printed book). You can scroll through the list box to read your messages. 2. To delete the contents of the current message log, choose <Clear log> 3. When prompted for confirmation, choose <OK>. 4. Choose <Done>. Command Line To read the message log, you can use a text editor or type type [drive:path] filename | more The filename is the name of your message log. For more information about the MS-DOS type and more commands, see your MS-DOS manual(s). Specifying a Different Message Log You can change the name of your message log. To change the name of the message log: 1. From the Message menu, choose Log messages to file. The dialog box shown in Figure 5.1 appears. (This figure may be found in the printed book). 2. In the "New file" text box, type the pathname of the new file, or use the "Contents of path" list box and the <Dir> command button to select an existing filename. If you do not specify a path, the new message log is stored in the LANMAN.DOS\LOGS directory. If you type a filename without an extension, LAN Manager Enhanced attaches the .LOG extension. 3. Choose <OK>. Command Line To change the message log file that stores your messages, type net log [drive:path] filename See Net Log, Chapter 7, "Enhanced Command Reference." Stopping and Starting Message Logging You can stop and restart message logging. To stop or start message logging: 1. From the Message menu, choose Log messages to file. The "Specify Message Log File" dialog box (Figure 5.1) appears. 2. Mark or unmark "Pause message logging." (An X in the check box means message logging is paused.) 3. Choose <OK>. Command Line To stop or start message logging, type net log /off net log /on See Net Log, Chapter 7, "Enhanced Command Reference." Printing Messages Instead of storing your messages in a message log, you can print messages as soon as they arrive. To print messages as they arrive, type net log devicename To resume storing messages in a message log, type net log [drive:path] filename See Net Log, Chapter 7, "Enhanced Command Reference." Using Aliases More than one person can receive messages at a workstation. Since only one user can log on at a workstation at any given time, you need to add an alias for each person using the workstation. However, you can't add an alias that is in use at another workstation. Aliases are deleted when the Messenger service is stopped. Therefore, each time that you restart the Messenger service, you'll need to add any aliases that you want on the workstation. Adding an Alias An alias can have as many as 15 characters. To add an alias to the workstation: 1. From the Message menu, choose Aliases. The dialog box shown in Figure 5.2 appears. (This figure may be found in the printed book). 2. Choose <Add alias>. The following dialog box appears: (This figure may be found in the printed book). 3. In the "New alias" text box, type the new alias. 4. Choose <OK>. 5. Choose <Done>. Command Line To add an alias to the workstation, type net name alias /add See Net Name, Chapter 7, "Enhanced Command Reference." Deleting an Alias You can delete an alias on your workstation or an alias that is forwarded to your workstation. To delete an alias from the workstation: 1. From the Message menu, choose Aliases. The "Aliases for Messaging" dialog box (Figure 5.2) appears. 2. In the list box, select the alias that you want to delete. 3. Choose <Delete>. 4. Choose <Done>. NOTE You cannot delete the workstation's computername from the alias list. Command Line To delete an alias from the workstation, type net name alias /delete See Net Name, Chapter 7, "Enhanced Command Reference." Chapter 6 Customizing Your Workstation ──────────────────────────────────────────────────────────────────────────── LAN Manager Enhanced provides several ways to manage workstation resources. This chapter describes how to automatically connect the workstation to a set of shared resources (using a profile).It also describes how to control and adjust services, and how to view your workstation's configuration. Using Profiles A profile is a file that automatically connects your workstation to a group of shared resources. (The group of connections is defined when you save the profile). The connections are made when you load the profile. When you save a profile, LAN Manager Enhanced records your workstation's current network connections under the profile filename that you assign. Later, you can load the profile and regain the connections. For example, you may have a task that requires you to use a particular group of shared resources. You can connect your workstation to the resources and save the connections in a profile. Any time you need to perform the task, you can load the profile rather than make the connections individually. A profile is created using either the Config menu's Save profile command or the net save command. A profile is loaded with the Config menu's Load profile command or the net load command. Profiles are stored in the LANMAN.DOS\PROFILES directory unless you specify otherwise. One profile─NETLOGON.PRO─has a special purpose. If NETLOGON.PRO exists, it is loaded by default whenever a user logs on at a workstation. It is useful to save the connections you most often make in NETLOGON.PRO. NETLOGON.PRO is created if you don't specify a filename with the Config menu's Save profile command or the net save command. NETLOGON.PRO is loaded if you don't specify a filename with the Config menu's Load profile command or the net load command. Creating a Profile You can create a profile at any time to save a set of connections. This gives you the flexibility of having a set of connections specific to a task. To save your current connections in a profile: 1. From the Config menu, choose Save profile. The following dialog box appears: (This figure may be found in the printed book). 2. In the "Filename" text box, type the profile name (if you do not type an extension, LAN Manager Enhanced adds the .PRO extension). You can also use the "Contents of path" list box with the <Dir> command button to select a profile. This replaces the contents of the existing profile with the workstation's current connections. When prompted for confirmation, choose <OK>. 3. Choose <OK>. Command Line To save your current connections in a profile, type net save [[drive:path] filename] See Net Save, Chapter 7, "Enhanced Command Reference." Loading a Profile You can load a profile to automatically connect your workstation to a group of shared resources. To load a profile: 1. From the Config menu, choose Load profile. The following dialog box appears: (This figure may be found in the printed book). 2. In the "Filename" text box, type the filename of the profile you want to load, or use the "Display files on" option and the "Contents of path" list box. If the profile is not in the workstation's LANMAN.DOS\PROFILES directory or in a directory on your computer's path, you must specify its full pathname. If you do not type a filename extension, LAN Manager Enhanced assumes the .PRO extension. 3. Select one of the "Load options:" ■ "Append to existing configuration" adds the profile's connections to your workstation's current connections ■ "Replace existing configuration" replaces your workstation's connections with the profile's connections 4. Choose <OK>. To view the new connections, from the View menu, choose Used resources. Command Line To load a profile and view your new connections: 1. Load a profile by typing net load [[drive:path] filename] 2. View your new connections by typing net use See Net Load and Net Use, Chapter 7, "Enhanced Command Reference." Controlling Services LAN Manager Enhanced services are ■ The Workstation service, which lets you use network resources ■ The Messenger service, which lets you receive messages at your workstation ■ The Netpopup service, which displays messages on your screen The Workstation service must be running before the Messenger and Netpopup services can start. Pausing a Service Pausing a service puts it on hold. Unlike stopping, pausing does not cancel connections or change settings. When you pause the Workstation service, you can use your computer's devicenames for local resources instead of shared resources. For example, the LPT1: devicename might be assigned to a shared printer queue. By pausing the Workstation service, you can use the devicename for a printer attached to the LPT1 port on your computer. Pausing the Workstation service also pauses the Messenger and Netpopup services. Command Line To pause a service, type net pause service See Net Pause, Chapter 7, "Enhanced Command Reference." Continuing a Service When a service is continued, it resumes running as it was before it was paused. Command Line To continue a service, type net continue service See Net Continue, Chapter 7, "Enhanced Command Reference." Pausing and Continuing Connections to Resources In addition to pausing a service, you can pause your workstation's connections to shared directories or shared printer queues. When you pause connections, your workstation does not recognize the devicenames assigned to the connections. If you've assigned a local devicename to a network connection (for example, LPT1:), pausing the connection lets you use the devicename for a local resource. The drdr option is used with the net pause and net continue commands to pause and continue connections to shared directories. The prdr option is used to pause and continue connections to shared printer queues. Command Line To pause and continue directory or printer queue connections: ■ Pause directory or printer queue connections by typing net pause {drdr | prdr} ■ Continue connections by typing net continue {drdr | prdr} See Net Pause and Net Continue, Chapter 7, "Enhanced Command Reference" Stopping the Workstation Service Stopping the Workstation service logs you off from the network. It also stops the Messenger and Netpopup services, deletes message aliases, and cancels network connections, . Command Line To stop the Workstation service, type net stop workstation See Net Stop, Chapter 7, "Enhanced Command Reference." Adjusting Services LAN Manager Enhanced services are controlled by options, which have values that determine how the service will perform. When you start a service, you can adjust the values of these options for as long as the service is running. When you stop and restart the service, LAN Manager Enhanced restores default settings for the options. Default settings are determined by an initialization file called LANMAN.INI, which is stored in the LANMAN.DOS directory. This file lists each option and its default value. Always consult your administrator before you adjust the value of an option. Service options are listed in each service's net start reference page in Chapter 7, "Enhanced Command Reference." Command Line To adjust a service's performance when you start it, type net start service [options] See Net Start Messenger, Net Start Netpopup, and Net Start Workstation, Chapter 7, "Enhanced Command Reference." Viewing the Workstation Configuration Your workstation configuration includes information such as your username and the domains that you participate in. To view your workstation's configuration: 1. From the Config menu, choose Workstation options. The following dialog box appears: (This figure may be found in the printed book). An X in the "Messenger" and "Netpopup" fields means the services are running. These fields cannot be changed in this dialog box. 2. Choose <Done>. Command Line To view your workstation's configuration, type net config workstation See Net Config Workstation, Chapter 7, "Enhanced Command Reference." Chapter 7 Enhanced Command Reference ──────────────────────────────────────────────────────────────────────────── This chapter provides a reference page for each LAN Manager Enhanced command. The purpose and syntax of the command, as well as comments, examples, and cross-references, are provided on each reference page. Reference pages are arranged in alphabetical order. Abbreviating Commands The reference pages spell out all command and service names. If a command has an abbreviation, it is listed on the command reference pages.You can abbreviate any command option by typing enough letters to distinguish it from the command's other options. Using /yes and /no Options Many LAN Manager Enhanced commands require confirmation to complete a task. To expedite the task, you can append the /yes or /no option to the command. These options can be abbreviated /y and /n. For example, the net logon command logs you on to the network.If a user is already logged on at a workstation, that user must be logged off before you can log on. If you want to log on at a workstation at which another user is logged on (your username is chrisj and your password is daffodil), type net logon chrisj daffodil LAN Manager Enhanced will return a series of prompts asking you to confirm logging off the current user and canceling the workstation's existing connections. You must type Y or press ENTER to proceed with the logon. To log on without getting any prompts, use the /y option. Type net logon chrisj daffodil /y Using Passwords with Commands Some commands require that you supply a password to connect to a shared resource. There are two ways to provide one: ■ Type the password with the command. For example, to provide the password petunia while assigning LPT1: to the LISTS shared directory on the \\ADMIN server, type net use lpt1: \\admin\lists petunia ■ Type an asterisk (*) instead of the password. LAN Manager Enhanced prompts you for the password. For example, type net use lpt1: \\admin\lists * LAN Manager Enhanced then displays this prompt: Type the password for \\ADMIN\LISTS: When you type the password at this prompt, the letters are not displayed. This keeps the password confidential. Controlling a Screen Display Some commands (for example, net help start workstation /options) produce more than one screenful of text. To stop the display from scrolling, press PAUSE or CTRL+S. To resume scrolling, press any key. You can also use the MS-DOS more command to scroll through one screenful at a time, for example: net help start workstation | more This displays one screenful of text. To display another screenful, press any key. Using Commands in Batch Files LAN Manager Enhanced commands can be used in batch programs (.BAT files), such as AUTOEXEC.BAT. For example, you can use commands to start the Workstation service, log on at the network, or make network connections. Command options can also be included in batch programs. To avoid confusion, do not abbreviate command options. Command Summary The following list tells what each LAN Manager Enhanced command does. net Starts the LAN Manager Screen. net access Displays or changes a user's permissions for a shared directory or file on a server. net config workstation Displays the current settings for the Workstation service. net continue Reactivates services or network connections suspended with the net pause command. net copy Copies files from a source to a destination. net help Displays a list of commands and topics for which you can get help, or provides help with a specific command or topic. net helpmsg Provides help with a LAN Manager Enhanced error message. net load Loads a profile. net log Controls or displays information about message logging. net logoff Logs a user off from the network. net logon Logs a user on to the network and sets the username, password, and domain at a workstation. net move Moves files from a source to a destination. net name Adds or deletes a message alias, or displays a workstation's list of aliases. net password Changes the password for a user account on a server or in a domain. net pause Pauses a service or network connections. net print Displays information about a shared printer queue or controls a user's print jobs. net save Creates a profile containing the workstation's connections to shared resources. net send Sends a message or short file to one or more users on the network. net start Starts a LAN Manager Enhanced service or displays services that are running. (Individual reference pages are provided for net start messenger, net start netpopup, and net start workstation.) net stop Stops the Workstation service. net time Synchronizes the workstation's clock with a server, or displays the time and date for a server or domain. net use Connects a workstation to or disconnects a workstation from a shared resource, or displays information about workstation connections. net view Displays a list of servers or displays resources that a server is sharing. net who Lists users logged on in a domain, at a server, or at a workstation. It also lists information about a user. Net ──────────────────────────────────────────────────────────────────────────── Purpose The net command starts the LAN Manager Screen. Syntax net [/mono] where /mono Improves the LAN Manager Screen on a computer with a monochrome screen display. Use this option if you have difficulty viewing the LAN Manager Screen on your computer. Comments After you type net, the LAN Manager Screen appears: (This figure may be found in the printed book). From this screen, you can use menus and dialog boxes to perform network tasks rather than typing LAN Manager Enhanced commands at the MS-DOS prompt. See Also For information about See ──────────────────────────────────────────────────────────────────────────── The LAN Manager Screen Chapter 2, "Getting Started" Net Access ──────────────────────────────────────────────────────────────────────────── Purpose The net access command displays or changes a user's permissions for a shared directory or file on a server. Syntax net access drive:pathname [/add name:permission[ ...]] net access drive:pathname [/change name:permission[ ...]] net access drive:pathname [/grant name:permission[ ...]] net access drive:pathname [/revoke name:permission[ ...]] where drive Is the devicename assigned to the shared directory containing the resource with permissions you want to change. This devicename must be assigned to a shared directory. pathname Is the resource with permissions you want to change. name Is one or more usernames or groupnames that are to gain or lose permissions. permission Is one to seven letters (RWCXDAP) specifying the types of permissions to be given to name for the resource. /add Creates a new set of permissions for a resource that has none assigned. You can type several name:permission strings separated by spaces. You must create a set of permissions for the resource before you can grant or revoke permissions. To keep control over the resource, give yourself P permission. /change Changes one or more users' permissions for a resource. You can type several name:permission strings separated by spaces. /grant Assigns additional permissions to a resource's existing set. You can type several name:permission strings separated by spaces. /revoke Cancels one or more users' permissions for a resource. You can type several name:permission strings separated by spaces. Comments Your administrator may have assigned you a home directory, which is a directory for your own personal use, on a server. After you connect to the server, this directory and the files on it can be controlled so that only certain users can have access to them. Permissions control a user's access to a file or directory. Permissions and what they allow the user to do are as follows: R (Read) Read and copy files, and view subdirectories. W (Write) Make changes to files. C (Create) Create files and subdirectories. X (Execute) Run a command or program. D (Delete) Remove files and subdirectories. A (Attributes) Change MS-DOS file attributes. For information about file attributes, see your MS-DOS manual(s). P (Permissions) Assign or alter permissions for a resource. Your administrator initially must give you this permission for a resource. Once you have it, you can use net access to assign permissions, including P, to other users or groups. If you create a new file or directory, be sure to assign yourself P permission. Otherwise, you will be denied further access to the resource. You must specify the devicename assigned to the shared directory and the pathname of the resource. When you specify a drive (or pathname) with net access, you get information about a resource's current set of permissions. The display looks similar to the following: Resource Permissions Permissions ───────────────────────────────────────────────── D:\MASTERDIR BILLRA:RWCXDAP *USERS:RWCDA *CORPOP:RWCDA This display lists the resource you specified and a two-column list of usernames and groupnames who can use the resource. Groupnames are designated by an asterisk (*). Following each username and groupname is a list of permissions assigned to it. You must have P permission for the resource to get information about it with net access. If you create a new file or directory and want to assign permissions to it, first use the /add option to specify which users and groups will have access. Be sure to add yourself (with P permission), or you'll be denied subsequent access. Use the /grant and /revoke options to add and cancel permissions for users and groups. Use the /change option to change existing permissions for a resource. If you create a file in a directory with permissions, the new file inherits the directory's permissions. Only if you want to change the file's permissions should you use the net access command. Examples a. To view the permissions for the shared directory connected to the G: devicename, type net access g: b. To add the user jamesro with read and write permissions to the users on the shared directory connected to the G: devicename, type net access g: /grant jamesro:rw See Also For information about See ──────────────────────────────────────────────────────────────────────────── Connecting to shared resources Net Use Shared resources, permissions, Microsoft LAN Manager Administrator's and user accounts Guide Net Config Workstation ──────────────────────────────────────────────────────────────────────────── Purpose The net config workstation command displays the current settings for the Workstation service. Syntax net config workstation Comments The net config workstation command provides a way to check settings for the workstation, such as the logon domain and the username. Example To display the current settings for the workstation service, type net config workstation See Also For information about See ──────────────────────────────────────────────────────────────────────────── Controlling and adjusting Chapter 6, "Customizing Your Workstation" services Changing settings when starting Net Start Workstation the Workstation service Net Continue ──────────────────────────────────────────────────────────────────────────── Purpose The net continue command reactivates services or network connections suspended with the net pause command. Syntax net continue {workstation | messenger | netpopup | drdr | prdr} where workstation Continues all workstation connections, and the Messenger and Netpopup services. messenger Continues the Messenger service. netpopup Continues the Netpopup service. drdr Continues all workstation connections to shared directories. prdr Continues all workstation connections to shared printer queues. Comments The net continue command can be abbreviated as net cont. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Pausing and continuing a service Chapter 6, "Customizing Your Workstation" or connections using the LAN Manager Screen Pausing a service or network Net Pause connections Net Copy ──────────────────────────────────────────────────────────────────────────── Purpose The net copy command copies files from a source to a destination. Syntax net copy source[+source[+...]] [/a | /b] [destination [/a | /b] [/v]] where source Specifies one or more files, directories, or devicenames to be copied. You can specify multiple files by separating filenames with a plus sign (+) or by using MS-DOS wildcard characters. destination Specifies which file, directory, or devicename source will be copied to. You can use MS-DOS wildcard characters to specify multiple files. /a Treats the source or destination as ASCII text. /b Treats the source or destination as a binary file. /v Verifies that information was properly recorded on the destination disk. Comments The net copy command is similar to the MS-DOS copy command, but it is much faster for copying between directories on a server. You don't need to connect to shared directories to use the net copy command. LAN Manager Enhanced makes the connections for you during the copy. The net copy command is usually used to copy files, but source can also be a directory (to copy all files in the directory), a devicename (such as A: to copy all files in the current directory of drive A), or the MS-DOS con command (to copy what is typed at the keyboard). Also, destination can be a devicename (such as LPT1: to copy to the device connected to LPT1) or it can be a network path. If source is a filename, the file is assumed to be in the current directory on the current drive. If destination is an existing file, the file is overwritten. If destination is a file that does not already exist, a new file is created. The new file is given the same name, creation date, and creation time as the source file. If only a drive is specified as the destination, LAN Manager Enhanced copies to the current directory on that drive. If no drive is specified, the source is copied to the current drive. Using the /a or /b Option The /a and /b options perform differently depending on whether they follow source or destination. The /a option is in effect in both cases until the /b option is specified. The /a option causes the file to be treated as ASCII text: ■ Placed after the source, /a causes the copying to stop before the first end-of-file character ■ Placed after the destination, /a causes an end-of-file character to be added as the last character of the new file The /b option copies the file in binary format: ■ Placed after the source, /b copies all end-of-file characters ■ Placed after the destination, /b copies all but the last end-of-file character Using the /v Option The /v option verifies that each sector written on the destination disk is recorded properly. This slows down the net copy command. Example To copy the MAIL.DOC file from the LISTS directory on the \\SALES server to the ADDRESS directory of the \\SALES server, type net copy \\sales\lists\mail.doc \\sales\address See Also For information about See ──────────────────────────────────────────────────────────────────────────── Moving files Net Move MS-DOS copy command Microsoft MS-DOS User's Guide and User's Reference Net Help ──────────────────────────────────────────────────────────────────────────── Purpose The net help command displays a list of commands and topics for which you can get help, or provides help with a specific command or topic. Syntax net help [command [/options] | topic] net command {/help | /?} where command Is the command you need help with (don't type net as part of command). topic Is the topic you need help with. /options Describes the available options of the command. /help Provides an alternative way to display the help text for a command. /? Displays the syntax for the command. To view a list of commands and topics for which help is available, type net help without options. Examples a. To view a list of commands and topics for which help is available, type net help b. To view information about the net load command, type net help load or net load /help c. To view the syntax for the net load command, type net load /? d. To view the options available for the net continue command, type net help continue /options See Also For information about See ──────────────────────────────────────────────────────────────────────────── Getting help while using the LAN Chapter 2, "Getting Started" Manager Screen Net Helpmsg ──────────────────────────────────────────────────────────────────────────── Purpose The net helpmsg command provides help with a LAN Manager Enhanced error message. Syntax net helpmsg message# where message# Is the four-digit number of the LAN Manager Enhanced message that you need help with. Comments When a network operation fails, you will see a message similar to the following: NET2182: The requested service has already been started. LAN Manager Enhanced error messages are preceded by "net," but you don't need to type net with message#. The net helpmsg command provides an explanation of why an error occurred and tells you what action to take to solve the problem. Example To get help with LAN Manager Enhanced error message NET2182, type net helpmsg 2182 See Also For information about See ──────────────────────────────────────────────────────────────────────────── Getting help while using the LAN Chapter 2, "Getting Started" Manager Screen Getting help with LAN Manager Net Help Enhanced commands Net Load ──────────────────────────────────────────────────────────────────────────── Purpose The net load command loads a profile. Syntax net load [[drive:path] filename] where drive:path Tells where the profile is stored. Without a drive letter and path, LAN Manager Enhanced assumes the profile is stored in the LANMAN.DOS\PROFILES directory. filename Is the name of the profile. If it has a .PRO extension, type only the name (without .PRO). If filename is omitted, the default profile, NETLOGON.PRO, is loaded. To restore connections made with the default profile, NETLOGON.PRO, type net load without options. Comments The net load command gives you an easy way to make connections to a set of shared resources by loading a profile. Loading a profile connects your workstation to the resources specified in the profile and cancels all existing connections. To see a list of your workstation's connections, use the net use command. A profile is created with the net save command, which records the workstation's current connections in a profile file. If NETLOGON.PRO exists, LAN Manager Enhanced automatically loads it each time that you log on to the network. Examples a. To load a profile called BUDGET.PRO, type net load budget b. To restore connections made with NETLOGON.PRO, type net load LAN Manager Enhanced reminds you of the existing connections and asks whether you want to cancel them. Type Y to load NETLOGON.PRO. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Using profiles Chapter 6, "Customizing Your Workstation" Creating profiles Net Save Net Log ──────────────────────────────────────────────────────────────────────────── Purpose The net log command controls or displays information about message logging. Syntax net log [[drive:path] filename | devicename] [/on | /off] where drive:path Tells where the message log file is stored. Without a drive letter and path, LAN Manager Enhanced assumes the file is to be stored in the LANMAN.DOS\LOGS directory. filename Is the name of the message log file. If it has a .LOG extension, type only the name (without .LOG). By default, messages are saved in the MESSAGES.LOG file. devicename Is the name of a device at your computer connected to a printer queue. This name can be an LPT: devicename. Messages are printed as they're received. /on Starts message logging. /off Stops message logging. To display information about message logging, type net log without options. Comments Message logging is on by default when the Messenger service is started. The net log command controls the way messages are saved. You can stop and start message logging, change the name of the file that stores the messages, or have messages printed as they're received. You can read the message log file with the MS-DOS type command. You can stop message logging with the /off option and still view messages if the Netpopup service is running. But if the Netpopup service is stopped and message logging is off, your workstation emits a beep when a message is received but neither displays nor logs the message. Examples a. To see whether message logging is on and the message log filename, type net log b. To change the name of the message log file from MESSAGES.LOG to NOVEMBER.LOG, type net log november c. To print messages directly to the printer attached to LPT1, type net log lpt1: See Also For information about See ──────────────────────────────────────────────────────────────────────────── Logging messages Chapter 5, "Sending and Receiving Messages" Starting the Messenger service Net Start Messenger Net Logoff ──────────────────────────────────────────────────────────────────────────── Purpose The net logoff command logs a user off from the network. Syntax net logoff Comments The net logoff command removes a username and password at a workstation. Logging off does not stop the Workstation service. It simply ensures that no unauthorized person can use your username and password to gain access to shared resources. Logging off cancels all of a workstation's connections. You cannot log off if you are using a shared directory. Before using net logoff, you must change to a local drive on your computer. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Starting LAN Manager Enhanced Chapter 2, "Getting Started" Logging on Net Logon Net Logon ──────────────────────────────────────────────────────────────────────────── Purpose The net logon command logs a user on to the network and sets the username, password, and domain at a workstation. Syntax net logon [username [password | *]] [/domain:name] where username Is the name by which you identify yourself on the network (username can have as many as 20 characters). password Is the password for your account. * Produces a password prompt. The password is not displayed when you type it. /domain:name Logs you on in a domain other than your workstation domain. This domain is called the logon domain. To be prompted for a username and a password, type net logon without options. Comments The net logon command establishes your username and password at a workstation. These are used to log you on in a domain and grant you access to shared resources. Logging on also loads the default profile, NETLOGON.PRO, if it exists. Only one user can be logged on at a workstation at a time. You can use net logon to log on with another username or to log on in another domain, but you must first log off. About Usernames If you don't specify a username with net logon, a username is suggested. This username comes from the username entry of the LANMAN.INI file. If this entry is blank, the computername is suggested. About Passwords A password is a confidential word which, together with your username, establishes your identity and gives you access to resources. When you log on to the network or connect to a shared resource, your workstation sends your username and password specified with net logon to a server for verification. The server checks to see if it has an account for you and if the logon password you specified matches the password in your account. LAN Manager Enhanced uses accounts in two ways. In a domain, a server maintains an account for each user. Once you log on, you can use all the resources in the domain to which your account is granted access. Accounts are also used by individual servers to limit access to their resources. What Is a Domain? A domain is a group of computers on the network. Domains are set up by an administrator. If you don't specify a /domain:name, LAN Manager Enhanced logs you on in your workstation domain, which is designated by the domain entry in the LANMAN.INI file. Your workstation domain probably includes the workstations and servers you most often work with. When you specify a /domain:name, you are logged on in a domain other than the workstation domain. This domain is called the logon domain. Servers visible in the workstation domain, the logon domain, and the domains listed in the othdomains entry of the LANMAN.INI file are displayed with the net view command. Your workstation will also receive messages sent to all of these domains. When you log on in a domain, you get access to most of the shared resources in the domain. Being logged on in one domain doesn't limit access to resources in other domains. Examples a. To log on in your workstation domain, type net logon LAN Manager Enhanced asks you for a username, then asks for a password. b. To log on with the username felix and be prompted for a password, type net logon felix * You see the following display: Type your password: Your password is not displayed as you type it. c. To log on in the accounting domain with the username felix and the password freddy, type net logon felix freddy /domain:accounting See Also For information about See ──────────────────────────────────────────────────────────────────────────── Logging on to and off from the Chapter 2, "Getting Started" network Logging off Net Logoff Changing your password Net Password Net Move ──────────────────────────────────────────────────────────────────────────── Purpose The net move command moves files from a source to a destination. Syntax net move source [destination] where source Is the pathname of one or more files to be moved. Specify multiple filenames by using MS-DOS wildcard characters. destination Is the pathname to which source is moved. If more than one file is moved, destination must be a directory. If destination is omitted, files are moved to the current directory. LAN Manager Enhanced won't overwrite an existing file during a move. If destination is an existing file, the move is canceled. Comments Use this command to move files between any two directories you have access to on the network. Moving a file is different from copying a file. Moving relocates the file; copying makes a duplicate. The moved file is given the date and time that the move occurred. You can move files between two remote computers. For instance, while working at workstation A, you can move files between servers B and C. You don't need to connect to shared directories to use net move. LAN Manager Enhanced makes the connections for you. Example To move all files in drive C's TEXT directory to the BUDGET directory on the \\ADMIN server's REPORTS shared directory, type net move c:\text\*.* \\admin\reports\budget See Also For information about See ──────────────────────────────────────────────────────────────────────────── Copying files Net Copy Net Name ──────────────────────────────────────────────────────────────────────────── Purpose The net name command adds or deletes a message alias, or displays a workstation's list of aliases. Syntax net name [alias [/add | /delete]] where alias Is the alias that you want to add or delete. An alias is a name to which a message can be sent. /add Adds an alias to the workstation. Typing /add is optional; typing net name alias performs the same task. /delete Removes an alias from the workstation. To display a list of aliases in use at the workstation, type net name without options. Comments A workstation can have three kinds of aliases, each receiving messages: ■ The workstation's computername, which is added when the Workstation service is started ■ Your username, which is added when you log on, provided your are not logged on elsewhere on the network ■ Aliases for messaging, which are added with net name Receiving Messages Messages can only be received by a workstation if the Messenger service is running. If the Netpopup service is also running, a message box displays the message on your screen. If message logging is on, the message is sent to the message log. If the Netpopup service and message logging are both off, you will only hear a beep when your workstation receives a message. The message is neither saved nor logged in the message log. A workstation receives messages sent to any of its aliases. A user does not have to be logged on at the workstation for the aliases at the workstation to receive messages. Adding and Deleting an Alias You can't add an alias to your workstation if it is already in use on the network. Similarly, you can't start the Workstation service with a computername that is being used as an alias at another workstation. You can log on with a username that is being used elsewhere as an alias, but the username isn't added as an alias to your workstation. Therefore, you will not receive messages for that username at your workstation. The /delete option is used to remove an alias. You can delete any alias in use at your workstation except the computername. Logging off deletes your username alias. Other aliases at the workstation, including the computername, still receive messages as long as the Workstation service is running. Examples a. To view the list of aliases at your workstation, type net name b. To add the alias juliewo to your workstation, type net name juliewo c. To remove the alias juliewo from your workstation, type net name juliewo /delete See Also For information about See ──────────────────────────────────────────────────────────────────────────── Messages Chapter 5, "Sending and Receiving Messages" Saving your messages in a file Net Log Sending messages Net Send Net Password ──────────────────────────────────────────────────────────────────────────── Purpose The net password command changes the password for a user account on a server or in a domain. Syntax net password [[\\computername | /domain:name] username oldpassword newpassword] where \\computername Is the server at which the password will be changed. username Is your username. oldpassword Is your current password. newpassword Is the new password, which can have as many as 14 characters. /domain:name Specifies a domain other than the workstation domain in which the password will be changed. To be prompted for the name of the domain or server, your username, old password, and new password, type net password without options. Comments User accounts are set up to control a user's access to shared resources on a server or in a domain. An account includes the username and password for a user.Accounts perform similar functions on servers and in domains. The difference is that an account in a domain controls access to most of the resources shared on the servers in the domain, rather than just one server's resources. If you don't supply a \\computername or a /domain:name, LAN Manager Enhanced assumes you are changing the password for your account in the workstation domain. Keeping Passwords Confidential To keep your password confidential, you can type an asterisk (*) instead of typing a password. You are then prompted for your password, which is not displayed as you type it. LAN Manager Enhanced asks for the new password twice to ensure that it is correct. If you forget your password, see your administrator for a new one. You can then use net password to change the new password to one that you want. Examples a. To change your password for the \\PRODUCTION server from petunia to daffodil (your username is robertch), type net password \\production robertch petunia daffodil To make the same change, but have LAN Manager Enhanced prompt you for a new password that won't be displayed when you type it, type net password \\production robertch petunia * b. To change your password in your workstation domain from carnation to orchid, type net password robertch carnation orchid c. To change your password in the accounting domain from magnolia to orchid, type net password /domain:accounting robertch magnolia orchid See Also For information about See ──────────────────────────────────────────────────────────────────────────── Passwords Chapter 2, "Getting Started" Logging on with a password Net Logon Net Pause ──────────────────────────────────────────────────────────────────────────── Purpose The net pause command pauses a service or network connections. Syntax net pause {workstation | messenger | netpopup | drdr | prdr} where workstation Pauses all workstation connections. messenger Pauses the Messenger service. netpopup Pauses the Netpopup service. drdr Pauses all workstation connections to shared directories. prdr Pauses all workstation connections to shared printer queues. Comments Pausing the workstation puts it on hold and keeps your username and password active. The workstation is reactivated with the net continue command. Pausing connections allows you to use a devicename for a device at your computer instead of a shared resource. For example, the LPT1: devicename can be connected to a shared printer queue with a laser printer. If LPT1: is also used for a dot-matrix printer at your computer, you can pause the network connection and print a quick draft at your computer. To send print jobs back to the shared printer queue, reactivate the connection with the net continue command. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Continuing a paused service or Net Continue connection Stopping the Workstation service Net Stop Net Print ──────────────────────────────────────────────────────────────────────────── Purpose The net print command displays information about a shared printer queue or controls a user's print jobs. Syntax net print {\\computername[\sharename] | devicename} net print {\\computername | devicename} [job# [/hold | /release | /delete]] where \\computername Is the name of the server sharing the printer queue(s). sharename Is the name of the printer queue. devicename Is the name of the device at your computer assigned to the queue. job# Is the identification number assigned to a queued print job. Job numbers are unique on the server. /hold Suspends a print job. A suspended print job is not printed until the /release option reactivates it. /release Reactivates a print job that is on hold. /delete Cancels a print job. Comments The net print command shows you where in a printer queue a print job is, and it lets you hold, release, or delete a job. Sending a job to a printer queue usually requires connecting to the queue with the net use command and then submitting the print job through an application program. But you can also send a job to a queue with the net copy or MS-DOS copy command. When you specify a computername (for example, \\SALES) with net print, you get information about the printer queues being shared on that server. You don't need to make a connection to a queue to get information about it. The display is similar to the following: Printer Queues at \\SALES Name Job # Size Status ─────────────── ─────────────── ─────────────── ────────── LASER Queue 3 jobs *Queue Active* JACKST 1 2509 Printing on LPT1 JENNYT 3 75 Waiting JENNYT 4 75 Waiting PRT Queue 2 jobs *Queue Active* BENST 5 180 Printing on LPT2 JOHNOC 6 512 Waiting The columns of this display give the following information: Name The sharename of each printer queue. Listed beneath the sharename are the usernames of people who sent print jobs. Job # The number of print jobs in each printer queue. Listed beneath the number of jobs is the unique identification number of each job in the queue. Size The size of each print job, in bytes. Status The status of either the printer queue or a print job. The status of a printer queue is controlled by an administrator. It can be ■ Active─Available to receive print jobs ■ Held─Suspended ■ Held until─Suspended until the time displayed ■ Pending delete─Being shut down ■ Error─Unavailable due to malfunction The status of a print job can be ■ Printing on devicename─Printing on the printer attached to the server's devicename ■ Spooling─Transferring into the printer queue ■ Waiting─Waiting for a printer to become available ■ Held─Held by the user with the /hold option ■ Held on devicename─Held because an administrator held the queue ■ Paused─Paused by the user or an administrator ■ Out of paper on devicename─Stopped because paper ran out ■ Error on devicename─Stopped because of a malfunction ■ Offline on devicename─Stopped because the printer is offline Examples a. To see the printer queues shared on the \\PRODUCTION server, type net print \\production b. To learn about the DOTM queue on the \\PRODUCTION server, type net print \\production\dotm c. If your computer's LPT1: devicename is connected to the \\PRODUCTION server's LASER queue, display the contents of the queue by typing net print lpt1: or net print \\production\laser d. To cancel a print job with the job identification number 7 on the \\PRODUCTION server connected to your computer's LPT1: devicename, type net print \\production 7 /delete or net print lpt1: 7 /delete See Also For information about See ──────────────────────────────────────────────────────────────────────────── Shared printers Chapter 4, "Using Shared Printers" Copying a print job to a printer Net Copy queue Connecting to a printer queue Net Use Viewing servers and queues Net View Net Save ──────────────────────────────────────────────────────────────────────────── Purpose The net save command creates a profile containing the workstation's connections to shared resources. Syntax net save [[drive:path] filename] where drive:path Tells where the profile is stored. Without a drive letter and path, LAN Manager Enhanced creates the profile in the LANMAN.DOS\PROFILES directory. filename Is the name of the profile. If filename is typed without an extension, a .PRO extension is added. To save your workstation's connections in the default profile, NETLOGON.PRO, type net save without options. Comments When you save a profile, LAN Manager Enhanced creates a file that contains a record of your workstation's current connections. When the profile is loaded, LAN Manager Enhanced makes the connections listed in the file. If you specify a profile that already exists, you see this warning message: This file already exists. Do you want to overwrite it? (Y/N) [N]: By saving separate profiles, you can conveniently make quick connections to sets of shared resources that you use only at certain times. Or, if others use your workstation, each user can have a personal profile. Another use of net save is to save connections temporarily if for some reason you must stop the Workstation service. Examples a. To save your workstation's current connections in NETLOGON.PRO, type net save b. A coworker uses your workstation regularly, and she uses shared directories that you don't use. She saves her profile under the name jane by typing net save jane See Also For information about See ──────────────────────────────────────────────────────────────────────────── Profiles Chapter 6, "Customizing Your Workstation" Loading profiles Net Load Net Send ──────────────────────────────────────────────────────────────────────────── Purpose The net send command sends a message or short file to one or more users on the network. Syntax net send {alias | * | /domain[:name] | /broadcast} message where alias Is the username, computername, or other name to send the message to. message Is the text of the message or the complete pathname of a text file (preceded by <) to be sent. * Sends the message to all aliases in your workstation domain. /domain[:name] Sends the message to all aliases in your workstation domain. If name is specified, the message is sent to all aliases in the specified domain. /broadcast Sends the message to all aliases on the network. Comments Use the net send command to send a message to a user, users in a domain, or all users on the network. An alias must be active on the network to receive a message, and the Messenger service must be running on the receiving workstation. The size of a message that a workstation can receive is limited. This limit is set with the sizmessbuf entry in the LANMAN.INI file. By default, LAN Manager Enhanced workstations can receive messages of up to 256 bytes. Limit your messages to 256 bytes to ensure that the entire message will be received. The simplest way to send a message is to type it from the command line. A longer message can be typed over several lines by pressing ENTER after net send alias and after each line of text, then pressing CTRL+Z or F6 and ENTER to send the message. LAN Manager Enhanced provides several ways to broadcast a message (send it to many users). You can broadcast messages to all aliases in your workstation domain (use * or /domain), a different domain (/domain:name), or the entire network (/broadcast). Broadcast messages must be 128 characters or fewer. Use this feature with discretion. Examples a. To send the message "Meeting changed to 3 p.m. Same place." to the alias jackst, type net send jackst Meeting changed to 3 p.m. Same place. Another way to type this message is net send jackst Meeting changed to 3 p.m. Same place. To send this message, press CTRL+Z or F6, then ENTER. b. To send the small text file INVITE.DOC to all aliases in the legal domain, type net send /domain:legal <invite.doc c. To inform everyone in your workstation domain that a party is being held in the cafeteria, type net send * There's a party in the cafeteria! See Also For information about See ──────────────────────────────────────────────────────────────────────────── Messages Chapter 5, "Sending and Receiving Messages" Saving or printing messages Net Log Adding aliases Net Name Using the Messenger service Net Start Messenger Net Start Messenger ──────────────────────────────────────────────────────────────────────────── Purpose The net start messenger command starts the Messenger service. Syntax net start [messenger [options]] where options are as follows: /logfile:pathname Assigns a pathname for the message log file. The default message log file pathname is LANMAN.DOS\LOGS\MESSAGES.LOG. /nummsgnames:number Sets the allowable number of message aliases for a workstation. The range is 1-10; the default is 2 aliases. /sizmessbuf:bytes Sets the size (in bytes) of the message buffer, limiting the size of messages the workstation can receive. The range is 128-62000; the default is 256 bytes. To display a list of services that are running at the workstation, type net start without options. Comments The Messenger service must be started in order for the workstation to receive messages. A message is sent to a workstation's alias with the net send command. LAN Manager Enhanced uses three types of aliases─a computername, a username, and an alias added with the net name command. There are two ways a workstation can receive messages sent to its aliases: ■ If the Netpopup and Messenger services are running, a message box displays each message on the workstation's screen. ■ If message logging is on, the incoming message is sent to a message log file or a printer. The net log command controls message logging. Changes made with the net start messenger command remain in effect only as long as the Messenger service is running. Example To start the Messenger service with a message buffer of 5120 bytes, type net start messenger /sizmessbuf:5120 See Also For information about See ──────────────────────────────────────────────────────────────────────────── Messages Chapter 5, "Sending and Receiving Messages" Logging messages Net Log Adding aliases Net Name Sending messages Net Send Starting the Netpopup service Net Start Netpopup Starting the Workstation service Net Start Workstation Net Start Netpopup ──────────────────────────────────────────────────────────────────────────── Purpose The net start netpopup command starts the Netpopup service. Syntax net start [netpopup] To display a list of services that are running at the workstation, type net start without options. Comments The Netpopup service lets you see messages as they arrive at your workstation. The Messenger service must be running for the workstation to receive messages. The message display is similar to the following: (This figure may be found in the printed book). The message box disappears after one minute or when you press the ESC key. If message logging is on, the message is saved in the message log file. If message logging is off, messages are discarded after they're displayed. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Messages Chapter 5, "Sending and Receiving Messages" Controlling network services Net Continue, Net Pause, Net Stop Logging messages Net Log Starting the Messenger service Net Start Messenger Net Start Workstation ──────────────────────────────────────────────────────────────────────────── Purpose The net start workstation command starts the Workstation service, optionally adjusting settings that affect the workstation's performance. Syntax net start [workstation [options]] Command options are grouped in the following five categories: Names Assign a name to your computer or specify parts of the network you'll work with. Times Specify how long the workstation waits for events to happen. Sizes Allocate memory or disk space for the workstation's use. Services Specify which services start with the Workstation service. Heuristics Adjust settings that determine how the workstation operates on the network. Each option corresponds to an entry in the [workstation] section of the LANMAN.INI file. When you specify a net start workstation option, you override the corresponding LANMAN.INI entry─but only until the next time that you start the workstation. Names /computername:name Is a unique name that identifies the workstation on the network. If the computername matches any of the following on the network, the workstation will not start: ■ a computername on anyone else's computer ■ a username on anyone else's computer ■ a domain name on the network ■ an alias on your computer or anyone else's Computernames can have 1-15 characters, including letters, numbers, and the following symbols: ! # $ % & ` ( ) - . @ ^ _ { } ~ /domain:name Is the name of the workstation domain. The range is 1-15 characters. /lanroot:name Is the name of the root directory in which LAN Manager Enhanced software is stored. The default is LANMAN.DOS. /othdomains:name[,...] Specifies one or more domains that the workstation belongs to (as many as four, separated by commas). /wrknets:number Specifies one or more networks in which the workstation participates. Networks are represented by LANA numbers 0-254 and are separated by commas. Times /chartime:msec Specifies the number of milliseconds that LAN Manager Enhanced collects data before sending it to a named pipe. If /charcount:bytes is satisfied first, LAN Manager Enhanced acts on that entry. The range is -1 (never) to 65535000; the default is 250 milliseconds. /charwait:sec Specifies the number of seconds that LAN Manager Enhanced waits for a named pipe to become available. The range is 0-65535; the default is 128 seconds. /keepconn:sec Specifies the number of seconds that LAN Manager Enhanced maintains a connection you're not using before breaking it. The range is 1-65535; the default is 600 seconds. /keepsearch:sec Specifies the number of seconds that LAN Manager Enhanced maintains a directory search request before discarding it. The range is 1-65535; the default is 600 seconds. Sizes /charcount:bytes Specifies the amount of data that LAN Manager Enhanced collects before sending it to a named pipe. If /chartime:msec is satisfied first, LAN Manager Enhanced acts on that entry. The range is 1-65535; the default is 16 bytes. /himem:{yes | no | optional} Specifies whether high memory allocation is used by the workstation. If optional is selected, the workstation determines when to use high memory allocation based on the hmamin entry of HIMEM.SYS (see the Microsoft LAN Manager Installation Guide). The workstation must have an expanded memory board and the appropriate device driver installed to use yes or optional. The default is no. /keepapis:{yes | no} Specifies whether LAN Manager Enhanced application program interfaces (APIs) are available to application programs. If no is selected, only named pipe APIs are available; the LAN Manager Screen and some LAN Manager commands will not work. Note that if APIs are not desired, the Setup program should be used to reinstall LAN Manager Enhanced without APIs, or to install LAN Manager Basic. The default is yes. /lim:{yes | no} Specifies whether LIM expanded memory is used by the workstation. The workstation must have LIM version 4.0 installed to use yes. The default is yes. /mailslots:{yes | no} Determines whether the workstation can receive second-class mailslots and server announcements. The default is yes. /maxcmds:n Specifies the number of NetBIOS commands LAN Manager Enhanced workstation software can run simultaneously. The range is 5-255; the default is 11 NetBIOS commands. /maxthreads:n Specifies the number of processes that can use LAN Manager simultaneously. The range is 10-254; the default is 20. /numbigbuf :n Specifies the number of big buffers the workstation uses to receive large files or amounts of data from servers. Buffer size is set with the /sizbigbuf entry. The range is 0-255; the default is 0 buffers. /numcharbuf:n Specifies the number of character and pipe buffers the workstation uses. The range is 0-15; the default is 2 buffers. /numdgrambuf:n Specifies the number of buffers available for receiving information (datagrams) from a server. The range is 3-112; the default is 3 buffers. /nummailslots:n Specifies the number of mailslots available on the workstation. The range is 0-255; the default is 2 mailslots. /numresources:n Specifies the maximum number of connections to shared resources allowed on the workstation at a time. The range is 1-255; the default is 9 connections. /numservers:n Specifies the maximum number of servers to which the workstation can have active connections at a time. The range is 1-255; the default is 9 servers. /numservices:n Sets the size of the internal service table. This number should be greater than or equal to the number of entries in the [services] section of the LANMAN.INI file. The range is 1-255; the default is 5 services. /numviewedservers:n Specifies the maximum number of servers that can be viewed with the net view command. The range is 0-255; the default is 50 servers. /numworkbuf:n Specifies the number of buffers the workstation uses. The range is 3-50; the default is 5 buffers. /sizbigbuf:bytes Specifies the size of big buffers used to receive large files or amounts of data. The /numbigbuf entry sets the number of buffers. The range is 0-65535; the default is 4096 bytes. /sizcharbuf:bytes Specifies the size in bytes of each character and pipe buffer. The range is 64-4096; the default is 128 bytes. /sizworkbuf:bytes Specifies the size in bytes of each workstation buffer. The range is 64-4096; the default is 1024 bytes. Services /wrkservices:service[,...] Lists LAN Manager Enhanced services that start automatically when the Workstation service starts. Names are separated by commas. Service names cannot be abbreviated. Heuristics /wrkheuristics:string Are settings for fine-tuning the workstation's performance. For a description of each heuristic, see the Microsoft LAN Manager Administrator's Reference. If you're accustomed to using Microsoft Networks for MS-DOS version 1.0 or IBM(R) PC-LAN version 1.2, you can still use the following net start workstation options: /b:n or /nbc:n Sets the number of workstation buffers (same as /numworkbuf:n). /z:n or /nbs:n Sets the size of the workstation's buffers (same as /sizworkbuf:bytes). Comments Workstation can be abbreviated as wksta, work, redirector, redir, or rdr. You must start the Workstation service to use LAN Manager Enhanced. To display a list of services that are running at the workstation, type net start without options. When assigning a computername while starting the Workstation service, typing /computername:name is optional; typing net start workstation computername performs the same task. Example To start a workstation with the computername \\FINANCIAL and the logon domain legal , type net start workstation finance /domain:legal See Also For information about See ──────────────────────────────────────────────────────────────────────────── Starting LAN Manager Chapter 2, "Getting Started" Pausing the Workstation service Net Pause Stopping the Workstation service Net Stop The LANMAN.INI file Microsoft LAN Manager Administrator's Reference Net Stop ──────────────────────────────────────────────────────────────────────────── Purpose The net stop command stops the Workstation service. Syntax net stop workstation Comments Stopping the Workstation service cancels any network connections the service is using and logs you off from the network. It also stops any other services that are running. Stopping the Workstation service differs from pausing it. Pausing it puts the service on hold and suspends any network connections. Before stopping the Workstation service, you may want to consider saving your current connections in a profile using net save. That way, you can easily restore the connections by using net load. Stopping the Workstation service does not remove software from your computer's memory. LAN Manager Enhanced is a "Terminate and Stay Resident" (TSR) program, which means that when it stops, it stays in your computer's memory. If other TSR programs are loaded into your computer's memory, the net stop command may not work. See Also For information about See ──────────────────────────────────────────────────────────────────────────── LAN Manager Enhanced services Chapter 2, "Getting Started" Loading profiles Net Load Saving profiles Net Save Starting services Net Start Messenger, Net Start Netpopup, Net Start Workstation Net Time ──────────────────────────────────────────────────────────────────────────── Purpose The net time command synchronizes the workstation's clock with a server, or displays the time and date for a server or domain. Syntax net time [\\computername | /domain[:name]] [/set] where \\computername Is the name of the server you want to check or synchronize with. /domain[:name] Displays the time and date at your workstation domain controller or synchronizes with that server. Use name to specify a different domain. /set Synchronizes the workstation's clock with that of the specified server or domain. To display the current date and time for the server designated as the network's official time source, type net time without options. Comments This command provides a way to check whether your workstation's clock is properly synchronized with the clocks at servers. Examples a. To see the time and date for the domain controller of the accounting domain, type net time /domain:accounting b. To set your workstation's clock to the time and date on the network's designated time server, type net time /set Net Use ──────────────────────────────────────────────────────────────────────────── Purpose The net use command connects a workstation to or disconnects a workstation from a shared resource, or displays information about workstation connections. Syntax net use [devicename] [\\computername\sharename [password]] net use {devicename | \\computername\sharename} /delete where devicename Assigns a name to connect to the resource or specifies the devicename to be disconnected. LAN Manager Enhanced uses two kinds of devicenames: disk drives (D: through Z:) and printers (LPT1: through LPT3:). \\computername Is the name of the server sharing the resource. \sharename Is the name of the resource. password Is the password needed to use the resource. To be prompted for the password, type an asterisk (*) instead of the password. The password will not be displayed when you type it. /delete Cancels a network connection. To list the workstation's connections, type net use without options. Comments Connecting your workstation to a shared resource lets you use the resource as if it were attached to your computer. For example, net use can connect your workstation to a shared printer queue that uses a high-quality printer. When you use an application program, such as Microsoft Excel, you can print files on the printer by directing print jobs to the devicename assigned to the queue. ──────────────────────────────────────────────────────────────────────────── NOTE You can use shared resources without making a connection with net use. The connection is made automatically by MS-DOS or by some network programs when you specify the network path of the resource with a command. But, if the resource is protected by a password, you must establish access with net use. You don't need to assign a devicename to establish access. Just type net use, the network path of the resource, and the password. ──────────────────────────────────────────────────────────────────────────── You cannot delete a connection to a shared directory if it's your current drive. You must first change to another drive. Viewing Your Workstation's Connections When you type net use without options, you get information about the workstation's connections. You see a display similar to the following: Status Local name Remote name ───────────────────────────────────────────────── OK M: \\FINANCIAL\SCRATCH DISCONNECTED G: \\PRODUCTION\C ERROR LPT1: \\PRINT1\LASER The "Status" of a connection can be ■ OK─The connection is active. ■ Disconnected─The connection is suspended by the server but will be reestablished when you use it. ■ Paused─The connection is paused by the workstation. ■ Error─The connection has ended and must be deleted. "Local name" is the devicename assigned to the resource. "Remote name" is its network path. There are two ways to get information about a connection: ■ Type net use devicename. ■ Type net use and the network path of the resource. You must type this command twice: first to establish a connection to the resource, then to get information about it. Either method produces a display similar to the following: Local name LPT1: Remote name \\PRINT1\LASER Resource type Print Status OK #Opens 0 #Connections 1 "Resource type" is the type of resource being used (Disk or Printer). "#Opens" is the number of files currently open on this connection. "#Connections" is the number of connections the workstation has to the resource. Examples a. To assign the devicename E: to the LETTERS directory on the \\FINANCIAL server, type net use e: \\financial\letters b. To assign the devicename LPT1: to the LASER2 printer queue on the \\ACCOUNTING server, type net use lpt1: \\accounting\laser2 c. To cancel your connection to the \\ACCOUNTING\LASER2 printer queue connected to LPT1:, type net use lpt1: /delete d. To establish access to the \\FINANCIAL server's SCRATCH shared directory, which requires the password meteor, type net use \\financial\scratch meteor e. To cancel your connection to the \\FINANCIAL\SCRATCH shared directory, type net use \\financial\scratch /delete See Also For information about See ──────────────────────────────────────────────────────────────────────────── Making connections Chapter 2, "Getting Started" Restoring a set of connections Net Load Pausing and continuing Net Pause, Net Continue connections Saving connections Net Save Net View ──────────────────────────────────────────────────────────────────────────── Purpose The net view command displays a list of servers or displays resources that a server is sharing. Syntax net view [\\computername] where \\computername Specifies the server whose shared resources you want to view. To display a list of servers in your workstation domain, logon domain, and other domains, type net view without options. Comments When you type net view without options, you see a list of servers similar to the following: Server Name Remark ─────────────── ─────────────── ───────────────── \\PRODUCTION Production file server \\PRINT1 Printer room, first floor \\SALES Sales records and lists When you specify a server with net view, you see a list of resources the server is sharing. The display looks similar to the following: Shared Resources at \\PRINT1 Printer room, first floor Sharename Type Used as Comment ─────────────── ─────────────── ─────────────── ─────── PRT Print LPT2: Printer pool FAST_PRT Print LPT1: High priority printer D Disk R: Drive D Root The columns give the following information: Sharename The name of the resource. Type The type of resource being shared. Used as The local devicename (if any) assigned to the resource. Comment An optional comment about the resource, supplied by an administrator. Examples a. To see a list of servers in your domain, type net view b. To see a list of the resources shared on the \\PRODUCTION server, type net view \\production See Also For information about See ──────────────────────────────────────────────────────────────────────────── Shared resources Chapter 2, "Getting Started" Using a resource shared on a Net Use server Net Who ──────────────────────────────────────────────────────────────────────────── Purpose The net who command lists users logged on in a domain, at a server, or at a workstation. It also lists information about a user. Syntax net who [/domain:name | \\computername | username] where \\computername Is the name of the server whose users you want information about. username Is the name of the user you want information about. /domain:name Lists users on a domain other than the domain in which you're logged on. To display information about users in the logon domain, type net who without options. Comments When you type net who without options, you see a list of users logged on in your logon domain.The display looks similar to the following: Users on Domain HEADQTRS Time since Username Workstation Logon Full Name ────────────────────────────────────────────────── ───── ABIGAIL PRODUCTION 10:11:45 Abigail Martin ARNIEG FINANCIAL 06:19:00 Arnold Gates PHILB SALES 11:23:13 Phil Bates The "Workstation" column lists the computername of the user's workstation. ──────────────────────────────────────────────────────────────────────────── NOTE The net who command provides information about servers using LAN Manager version 2.0. Servers using previous versions of LAN Manager provide information about users connected to it only to users with administrative privileges on the server. ──────────────────────────────────────────────────────────────────────────── Example To see a list of users currently logged on in the marketing domain, type net who /domain:marketing See Also For information about See ──────────────────────────────────────────────────────────────────────────── Displaying a list of servers Net View PART III LAN Manager Basic ──────────────────────────────────────────────────────────────────────────── Part 3 explains how to use a LAN Manager Basic workstation to perform network tasks. It includes procedures for starting the workstation, getting help, and using shared resources. Additionally, LAN Manager Basic commands are explained in detail. Chapter 8 Using LAN Manager Basic ──────────────────────────────────────────────────────────────────────────── This chapter explains how to start and use LAN Manager Basic, get online help, connect to local-area network directories and printers, and print jobs over the network. Instructions for viewing, pausing, and continuing your workstation's network connections are included. For information about LAN Manager Enhanced, see Part 2, "LAN Manager Enhanced." Starting LAN Manager Basic To use LAN Manager Basic, you must start the Workstation service, which loads software into your computer's memory that lets you connect to and use network resources. When you start the workstation, you supply a unique computername. This computername identifies your workstation to servers. ■ To start the workstation: 1. Get your computername from your administrator. 2. Type net start workstation followed by your computername. For example, if your computername is johnw, start the workstation by typing net start workstation johnw (Note that workstation can be abbreviated as wksta, redirector, or rdr.) Several messages appear as the workstation starts. When the workstation is started, you'll see this message: Command completed successfully. Once the workstation is started, it remains running until you turn off the computer. If you specify a computername that is already being used on the network, the following error message is displayed: System error. If you receive this message, the workstation is started, but it does not have a computername and you cannot use the workstation. See your administrator to get a valid computername. Then use the net name command to assign the computername. ■ To assign a computername when the workstation has been started but no computername has been assigned, type net name followed by a valid computername. For example, to assign the computername johnwa, type net name johnwa You can verify a workstation's computername after the workstation is started by typing net name. A display similar to the following appears: Name Type ─────────────────────────────── JOHNWA COMPUTER NAME Once a valid computername is assigned, it cannot be changed. You must turn off the computer and restart the workstation to assign a different computername. Getting Help LAN Manager Basic gives you two kinds of help: a listing of all the commands for which help is available or information about a specific command. To see a list of LAN Manager Basic commands and an explanation of syntax, type net help. There are two ways to get help with a specific command: ■ By typing net help followed by the command name (without typing net as part of the command name) ■ By typing the full command name followed by help For example, you can type net help print or net print help Both commands display the same information. Using Shared Directories LAN Manager Basic lets you use a shared directory in much the same way you would use a directory or disk drive on your computer. The files and application programs on a shared directory can be used as though they were stored on your computer. LAN Manager Basic lets you gain access to shared directories in two ways. You can connect your workstation to a shared directory by assigning a devicename to it. This concept is illustrated in Figure 8.1. You can also specify the shared directory as part of a pathname in some MS-DOS commands. These procedures are explained in the following two sections. (This figure may be found in the printed book). In both cases, the shared directory is identified by a network path. A network path is a server's computername followed by a sharename. A sharename is a name that identifies a shared resource (directory or printer queue). Two backslashes (\\) precede the computername, and another backslash precedes the sharename. For instance, \\PRODUCTION\REPORTS specifies a network path for the REPORTS shared directory on the \\PRODUCTION server. Connecting to a Shared Directory You can connect your workstation to a shared directory by assigning a disk drive devicename to it. A disk drive devicename is a drive letter followed by a colon (for example, D:). You use the devicename to gain access to the shared directory just as you use A: to gain access to a floppy disk drive on your computer. Devicenames A: through Z: are available. ──────────────────────────────────────────────────────────────────────────── NOTE If you assign a devicename of a disk drive on your computer (for example, A:), your workstation recognizes the network connection─not the local drive─unless the network connection is paused or disconnected. Avoid assigning the C: devicename. ──────────────────────────────────────────────────────────────────────────── ■ To connect to a shared directory, type net use followed by a disk drive devicename, a space, and the network path of the directory. For example, to assign the S: devicename to the MIDWEST shared directory on the \\SALES server, type net use s: \\sales\midwest If you make a mistake in typing a command or you specify an incorrect network path when connecting to a shared directory, the following error messages may appear: Connection refused or syntax error Network name not found Some resources require you to supply a password to make a connection. If you don't supply a password when one is required, the following error message appears: Access denied To learn how to supply passwords, see the "Using Passwords" section. Once a connection is established, you no longer need to specify the network path to gain access to the shared directory. Instead, specify the devicename you assigned to the directory. For instance, if S: is assigned to the \\SALES\MIDWEST directory, S: represents the network connection in the same way C: represents your computer's hard disk drive. You can change the current drive to S: and use the shared directory as though it were one of your computer's disk drives. Using Passwords - You may need to type a password with net use to gain access to a shared directory. Your administrator can give you the correct password. Once you know the correct password, there are two ways to supply it: ■ By typing the password at the end of the net use command. For example, to supply the password region while assigning S: to the MIDWEST shared directory on the \\SALES server, type net use s: \\sales\midwest region ■ By typing an asterisk (*) instead of the password at the end of the command line. LAN Manager Basic then prompts you for a password. To use this method with the preceding example, type net use s: \\sales\midwest * The following prompt appears: Password: Type the password at the prompt. The letters don't appear on the screen as you type, keeping the password confidential. Using MS-DOS Commands with Shared Directories The network path of a shared resource can be used as part of a pathname in some MS-DOS commands. In this case, LAN Manager Basic connects to the server sharing the directory when the command is performed, provided the directory doesn't require a password. You don't need to assign a devicename to a shared directory when the network path is used as part of an MS-DOS command. But if a devicename is assigned, you can specify the devicename rather than the network path in the command. You can also use a file in a shared directory with any application program that runs under MS-DOS. For example, to edit the LIST.DOC file in the \\SALES\MIDWEST directory with Microsoft Word, type word \\sales\midwest\list.doc ──────────────────────────────────────────────────────────────────────────── NOTE If you want to use a shared directory in an MS-DOS command but the directory requires a password, you must type net use, the network path, and the password. You don't need to specify a devicename. ──────────────────────────────────────────────────────────────────────────── You cannot use network paths with the following MS-DOS commands: ■ dir ■ copy The following commands, which read from and write to the disk, cannot be used with shared directories and their files: ■ chkdsk ■ diskcopy ■ format ■ join ■ recover ■ subst ■ sys If you try to use a command that reads to or writes from the disk with a shared directory, the following message appears: Cannot [command] a Network drive where [command] is the name of the command you typed. Disconnecting from a Shared Directory You can disconnect your workstation from a shared directory when you are finished using it or when you want to assign the devicename to another resource. ■ To disconnect your workstation from a shared directory, type net use followed by the devicename and /delete. (The /delete option can be abbreviated as /d.) For example, to disconnect D: from a shared directory, type net use d: /delete Using Shared Printers With LAN Manager Basic, you can use shared printers by connecting your workstation to a shared printer queue. A printer queue manages print jobs. It collects print jobs and sends them to a printer in the order they're received. Incoming jobs are held in the queue until the printer is ready to print them (see Figure 8.2). (This figure may be found in the printed book). When you connect your workstation to a shared printer queue, you send print jobs to the queue just as you would send print jobs to a printer attached to your computer. Connecting to a Shared Printer Queue Connect your workstation to a printer queue by assigning a devicename. Devicenames LPT1: through LPT3: are available. ■ To connect your workstation to a printer queue, type net use followed by the devicename and the network path of the printer queue. For example, to assign LPT1: to the PRINT1 printer queue on the \\FINANCIAL server, type net use lpt1: \\financial\print1 If you use a devicename that is also attached to a printer at your workstation, your workstation will recognize only the network connection when you use the devicename. To get your workstation to recognize the printer that is attached to your computer, you must disconnect or pause the connection to the shared printer queue. ──────────────────────────────────────────────────────────────────────────── NOTE You may need to supply a password with net use to gain access to a shared printer queue. See the "Using Passwords" section, earlier in this chapter. ──────────────────────────────────────────────────────────────────────────── Printing over the Network Once you have assigned a devicename to a shared printer queue, there are two ways to print a file over the network. You can print a file from an application program or send a file directly to the devicename. ■ To print a file from a software application, set up the application to print to the devicename you assigned to the shared printer queue. Then print as you normally would. ■ To send a file to a devicename assigned to a printer queue, type net print followed by the filename and then the devicename. For example, to send the STATUS.DOC file to the printer queue connected to LPT1:, type net print status.doc lpt1: Viewing the Status of a Print Job You can view the contents of a shared printer queue connected to a devicename, or you can view the contents of all queues on a server. ■ To view the contents of a shared printer queue connected to a devicename, type net print followed by the devicename. For example, to view the printer queue connected to LPT1:, type net print lpt1: ■ To view the contents of a server's printer queues, type net print followed by the computername of the server. For example, to view the contents of printer queues on the \\FINANCIAL server, type net print \\financial You don't need a connection to a server to view the contents of its queues. When you specify either a devicename or a computername, a display similar to the following appears: Pos ID Size Date Time Name Status ────────────── ─────────────── ─────────────── ────────────── 001 268 115074 05-10-90 16:20 ANDREWS Printing 002 269 65174 05-10-90 16:22 KATIEMC Waiting 003 270 34594 05-10-90 16:25 SETHJ Waiting 004 271 103465 05-10-90 16:28 CAROLR Waiting For each print job, the position in the queue, identification number, size (in bytes), date, time, owner, and status are displayed. Disconnecting from a Shared Printer Queue You can disconnect your workstation from a shared printer queue when you are done using the resource or when you want to use the connection for another resource. ■ To disconnect from a shared printer queue, type net use followed by the devicename and /delete. (The /delete option can be abbreviated as /d.) For example: net use lpt1: /d Listing Connections to Network Resources At any time, you can view your connections to directories and printer queues. ■ To view the status of your workstation's connections or the names of devicenames and resources you're using, type net use. A display similar to the following appears: Local Network Status Device Name ─────────────── ─────────────── ────────── D: \\FINANCIAL\SYS E: \\SALES\SUSANKO F: \\FINANCIAL\APPS ERROR LPT1: \\FINANCIAL\LASERJET The listing shows all of the network resources connected to your workstation. If "ERROR" appears in the "Status" column, the connection is no longer active or has been suspended by the server. You may need to delete the connection and connect to the resource again. Pausing and Continuing Connections Occasionally, you may want to pause network connections to use devicenames for your workstation's own disk drives or printers. ■ To pause connections to all shared directories, type net pause drdr. To pause connections to all shared printer queues, type net pause prdr. ■ To continue connections to all shared directories, type net continue drdr. To continue connections to all shared printer queues, type net continue prdr. For example, if you've assigned your workstation's LPT1: devicename to a shared printer, you can't use LPT1: for a local printer. To pause this connection, type net pause prdr You can now use LPT1: for the printer attached to your computer. Note that pausing one printer connection pauses all printer connections. When you want to use the shared printer again, type net continue prdr Your connections to shared printer queues are reactivated. Chapter 9 Basic Command Reference ──────────────────────────────────────────────────────────────────────────── This chapter provides a reference page for each LAN Manager Basic command. The purpose and syntax for each command, as well as comments, examples, and cross-references, are provided on the command reference page. The command reference pages are arranged in alphabetical order. Command Summary The following LAN Manager Basic commands are described in this chapter: net continue Reactivates network connections suspended with the net pause command. net help Provides help with a specific command or lists commands for which help is available. net name Displays the computername assigned to a workstation or assigns a computername to a workstation. net pause Pauses connections to shared resources. net print Displays the contents of shared printer queues or prints a file. net start workstation Starts the workstation and sets the computername. net use Connects the workstation to or disconnects the workstation from shared resources, or displays a list of the workstation's network connections. Net Continue ──────────────────────────────────────────────────────────────────────────── Purpose The net continue command reactivates network connections suspended with the net pause command. Syntax net continue {drdr | prdr} where drdr Continues the workstation's connections to all shared directories. prdr Continues the workstation's connections to all shared printer queues. Comments The net continue command can be abbreviated as net cont. When you continue network connections, any local connections, such as a printer attached to port LPT1 on your workstation, are suspended. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Pausing and continuing network Chapter 8, "Using LAN Manager Basic" connections Suspending connections to shared Net Pause resources Connecting to a shared resource Net Use Net Help ──────────────────────────────────────────────────────────────────────────── Purpose The net help command provides help with a specific command or lists commands for which help is available. Syntax net help [command] net [command] help where command Is the command you need help with. Command names are continue, name, pause, print, start, and use. To display information about how to get help, type net help. Comments For help with a specific command, type net, the command name, and help, or type net help followed by the command name (do not repeat the word net as part of the command name). Examples a. To view a list of LAN Manager Basic commands that you can get help with, type net help b. To get information about the net use command, type net help use or net use help See Also For information about See ──────────────────────────────────────────────────────────────────────────── Getting help Chapter 8, "Using LAN Manager Basic" Net Name ──────────────────────────────────────────────────────────────────────────── Purpose The net name command displays the computername assigned to a workstation or assigns a computername to a workstation. Syntax net name [computername] where computername Is the name assigned to the workstation. To display the workstation's computername, type net name. Comments The computername identifies your workstation on the network. When you connect your workstation to a shared resource, the server sharing the resource checks the computername to verify that you are allowed access. A computername must be unique on the network. The computername is assigned with the net start workstation command unless you try to assign a name that is already being used on the network. In this case, the workstation will be started, but no computername will be assigned. If this occurs, use net name to assign a valid computername. If no computername is displayed when you type net name without options, the workstation was started without a valid computername. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Computernames Chapter 8, "Using LAN Manager Basic" Setting computernames Net Start Workstation Net Pause ──────────────────────────────────────────────────────────────────────────── Purpose The net pause command pauses connections to shared resources. Syntax net pause {drdr | prdr} where drdr Pauses the workstation's connections to all shared directories. prdr Pauses the workstation's connections to all shared printer queues. Comments Pausing a connection allows you to use a devicename for a device at your workstation instead of a shared resource. For example, the LPT1: devicename can be connected to a shared printer queue. If LPT1: is also used for a printer attached to your computer, you can pause the network connection and print a file at your computer's printer. To send print jobs back to the shared printer queue, reactivate the connection with the net continue command. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Pausing and continuing network Chapter 8, "Using LAN Manager Basic" connections Continuing connections to shared Net Continue resources Net Print ──────────────────────────────────────────────────────────────────────────── Purpose The net print command displays the contents of shared printer queues or prints a file. Syntax net print {\\computername [\sharename] | devicename} net print [filename] devicename where \\computername Is the server sharing the printer queue(s). sharename Is the name of a printer queue. devicename Is the device at your workstation assigned to the printer queue. LPT1: through LPT3: are available. filename Is the name of the file to be printed. Comments Specifying the computername of a server displays the contents of its printer queues. You don't need to be connected to a server to view the contents of its printer queues. Specifying the devicename assigned to a printer queue displays the contents of that printer queue, allowing you to check the status of a print job after it's sent. Specifying either a computername or a devicename produces a display similar to the following: Pos ID Size Date Time Name Status ─────────────── ─────────────── ─────────────── ─────────── 001 268 115074 05-10-90 16:20 DANC Printing 002 269 65174 05-10-90 16:22 JOHNSW Waiting This display shows the position, identification number, size (in bytes), date, time, owner, and status of each print job. The "Name" column lists the owner of the print job. If the job was sent from a LAN Manager Basic workstation, the computername is displayed. If the job was sent from a LAN Manager Enhanced or an MS OS/2 workstation, the user's username is displayed. Examples a. To examine the contents of printer queues at the \\FINANCIAL server, type net print \\financial b. To send the REPORTS.DOC file to the printer queue connected to your workstation's LPT1: devicename, type net print reports.doc lpt1: c. To check the status of a print job that has been sent to the printer queue connected to LPT1:, type net print lpt1: See Also For information about See ──────────────────────────────────────────────────────────────────────────── Printing over the network Chapter 8, "Using LAN Manager Basic" Connecting to shared printer Net Use queues Net Start Workstation ──────────────────────────────────────────────────────────────────────────── Purpose The net start workstation command starts the workstation and sets the computername. Syntax net start workstation computername where computername Is the name assigned to the workstation. Comments You can abbreviate workstation as wksta, redirector, or rdr. When you type net start workstation computername, LAN Manager Basic software is loaded into your computer's memory and the workstation is started. For convenience, the net start workstation command can be added to an AUTOEXEC.BAT file to start LAN Manager Basic automatically. Once started, the workstation remains running until the computer is turned off or restarted. See Also For information about See ──────────────────────────────────────────────────────────────────────────── Computernames Chapter 8, "Using LAN Manager Basic" Checking the computername Net Name Net Use ──────────────────────────────────────────────────────────────────────────── Purpose The net use command connects the workstation to or disconnects the workstation from shared resources, or displays a list of the workstation's network connections. Syntax net use net use [devicename] [\\computername\sharename [password | *]] net use {devicename | \\computername\sharename} /delete where devicename Assigns a name to a shared resource. There are two kinds of devicenames: disk drive devicenames (A: through Z:) and printer devicenames (LPT1: through LPT3:). \\computername Is the name of the server sharing the resource. sharename Is the name of the shared resource. password Is the password needed to use the shared resource. * Results in a prompt for the password. /delete Ends a network connection (/delete can be abbreviated as /d). To display a list of the workstation's connections, type net use. Comments Connecting to a shared resource lets you use the resource as if it were attached to your computer. If you assign a devicename of a disk drive on your computer (for example, A:), your workstation recognizes the network connection─not the local drive─unless the network connection is paused or disconnected. For example, net use can connect your workstation to a shared printer queue with a high-quality printer. When you use an application such as Microsoft Excel, you can print files on the printer by directing print jobs to the devicename assigned to the queue. If a password is required to gain access to a shared resource, LAN Manager Basic sends an error message if the password is not supplied. If this occurs, obtain the password from your administrator and retype the command. You can type an asterisk (*) instead of the password to get a password prompt. As you type the password, the letters are not displayed, keeping the password confidential. The net use command can be added to the AUTOEXEC.BAT file to connect to shared resources automatically. You cannot delete a connection to a shared directory if it's used as your current drive. You must first change to another drive. When typed without options, net use lists all of your workstation's network connections. The display looks similar to the following: Local Network Status Device Name ─────────────────────────────────────── M: \\FINANCIAL\SCRATCH ERROR LPT1: \\SALES\LASER This display lists the status, local devicename, and network path of each connection. If "ERROR" appears in the "Status" column, the connection is no longer active or has been suspended by the server. You may need to delete the connection and connect to the resource again. Examples a. To assign the E: devicename to the LETTERS shared directory on the \\SALES server, type net use e: \\sales\letters b. To assign the LPT1: devicename to the LASER shared printer queue on the \\SALES server, type net use lpt1: \\sales\laser c. To disconnect the LPT1: devicename, type net use lpt1: /delete d. To establish access to the \\FINANCIAL server's SCRATCH shared directory, which requires the password deposits, type net use \\financial\scratch deposits See Also For information about See ──────────────────────────────────────────────────────────────────────────── Shared directories Chapter 8, "Using LAN Manager Basic" Appendix A Menu Commands ──────────────────────────────────────────────────────────────────────────── This appendix gives a brief tour of the LAN Manager Screen. It describes information displayed on the screen and explains what you can do with each menu command. The LAN Manager Screen After you start the Workstation service, you can use the LAN Manager Screen. The screen is shown in Figure A.1. (This figure may be found in the printed book). The fields of the LAN Manager Screen provide the following information: Menu bar Displays the names of menus from which you can select menu commands. Current focus Shows the computername of your workstation or the server that is the focus of activity when using LAN Manager Screen commands. Workstation information Provides the following information about your workstation: Your username The username specified when you logged on to the network. Your computername The computername specified when the workstation was started. Your domain The name of your logon domain. This is the domain name specified when you logged on to the network. If you didn't specify a domain name, you automatically logged on in the workstation domain, which is specified in the LANMAN.INI file. Note that the workstation domain and the logon domain are the same. Servers in the logon and workstation domains Lists the servers in your logon and workstation domains. Scroll bar Lets you scroll through the servers in the list box with the mouse. Message line Provides a brief statement about the current menu, command, or task. View Menu The View menu commands let you view shared resources on the server of current focus, make connections to shared resources, view your workstation's connections, view information about users on the network, and exit the LAN Manager Screen. (This figure may be found in the printed book). The following list describes the View menu commands: Available resources Displays the different types of resources available on the server of current focus. These resources include shared directories (disks) and printers. Printer queues Displays the printer queues on the server of current focus and the print jobs in each queue. Used resources Displays the resources that your workstation is connected to on the server of current focus. You can connect your workstation to resources shared by servers other than the server of current focus and by non-LAN Manager servers. Users on a server Displays the users that are logged on at the server of current focus. Users on a domain Displays the users that are logged on in a domain. Exit Removes the LAN Manager Screen. Message Menu The Message menu commands let you send, log, and read messages, and add and delete aliases. (This figure may be found in the printed book). The following list describes the Message menu commands: Send a typed message Lets you send a message to one or more users on the network. Log messages to file Lets you select the log file that stores your messages, and pause and continue message logging. Read message log file Displays the messages in your message log file. Aliases Displays the message aliases on your workstation. You can add message aliases to and delete message aliases from your workstation. Config Menu The Config menu commands let you log on, log off, use profiles, and view your workstation configuration. (This figure may be found in the printed book). The following list describes the Config menu commands: Log on to LAN Lets you log on to the network. Log off from LAN Lets you log off from the network. Load profile Displays the profiles that you can load to make automatic connections to shared resources. Save profile Lets you save a record of the workstation's current connections as a profile. Workstation options Displays information about your workstation's configuration. Accounts Menu The Accounts menu commands let you view information about your account and change your password. (This figure may be found in the printed book). The following list describes the Accounts menu commands: Your account Displays information about your account. Change your password Lets you change your password at a server. Help Menu The Help menu commands let you access different types of online help. (This figure may be found in the printed book). The following list describes the Help menu commands: General help F1 Describes the LAN Manager Screen and how to use it. Keyboard Tells how to use the LAN Manager Screen with the keyboard. Mouse Tells how to use the LAN Manager Screen with the mouse. Table of contents Displays a list of tasks you can perform with the LAN Manager Screen. Glossary of terms Displays an alphabetical list of terms and definitions used with LAN Manager Enhanced. Using Help Explains how to use help. About LAN Manager Provides a brief description of LAN Manager. Appendix A Country Codes ──────────────────────────────────────────────────────────────────────────── A country code in a user account defines the language in which messages are sent from a server to a user. Messages such as print notifications and alerts are sent from a server to a user's workstation. The country code does not affect the language of error messages and explanation messages generated by the workstation itself. The following table lists available country codes. The default value for the country code is 0. If the default value is specified, messages are sent in the language used in the LANMAN\NETPROG\NET.MSG file. ╓┌──────────┌─────┌───────────────┌──────────────────────────────────────────╖ Country Code Country Code ──────────────────────────────────────────────────────────────────────────── Asia 099 Latin America 003 Australia 061 Netherlands 031 Belgium 032 Norway 047 Canada 002 Portugal 351 Denmark 045 Spain 034 Finland 358 Sweden 046 France 033 Switzerland 041 Germany 049 United Kingdom 044 Italy 039 United States 001 Japan 081 ──────────────────────────────────────────────────────────────────────────── Glossary ──────────────────────────────────────────────────────────────────────────── Account See User account Administrator The individual responsible for the local-area network. This person typically configures the network, maintains the network's shared resources and security system, creates user accounts, assigns permissions, and helps users. Alert message A message sent by a server to a LAN Manager Enhanced workstation informing the user of conditions that require attention. Alias A name used to receive messages at a LAN Manager Enhanced workstation. A workstation can have up to 15 aliases, including the computername and username. An alias must be unique on the local-area network. Application program A program used for a particular kind of work, such as word processing or database management. ASCII text A standard text file. See also Binary format. Basic See LAN Manager Basic. Batch file See Batch program. Batch program An executable program containing a group of commands that are performed whenever the batch program is run. MS-DOS batch programs always have the filename extension .BAT. A batch program called AUTOEXEC.BAT runs when you start MS-DOS. Binary format A series of binary digits (ones and zeros). See also ASCII text. Broadcast message A message sent to all users in a domain or on the local-area network. See also Messenger service. Buffer An area in a computer's memory that is used to store data. Check box An area in a LAN Manager Screen dialog box that has options you can set. Click To position the mouse pointer on a character, and press and release the left mouse button. Command An instruction that provides the necessary information for a computer or a program to perform a specific task. You type LAN Manager Basic commands at the operating system prompt. You type LAN Manager Enhanced commands at the operating system prompt or choose them from a menu on the LAN Manager Screen. Command button A word or phrase enclosed in angle brackets at the bottom of the LAN Manager Screen or a dialog box (for example, <Zoom>> ). Choosing a command button carries out a task or leads to another dialog box. Command line The MS-DOS prompt. See also Command and Prompt. Command option See Option. Computername The name of a workstation or a server on a local-area network. In a network path, a server's computername is preceded by two backslashes (for example, \\SALES). Computernames must be unique on the local-area network. For LAN Manager Basic, the computername is used to identify your workstation to servers. Configuration The way the workstation, server, or local-area network is set up, including both hardware and software. Connect To assign a name of a local device to a shared resource or to gain access to a shared resource with a LAN Manager command. See also Devicename and Shared resource. Connection The software link between a workstation and a shared resource. You make connections by assigning a local devicename on a workstation to a shared resource on a server. See also Session. Continue To restart a LAN Manager service that was paused. See also Pause. Country code A code that is included in a user's account and specifies the user's language. This code determines the language in which messages are sent from the server. Current focus The server or workstation that is the focus of activity when using the LAN Manager Screen. Cursor The lighted shape on the computer screen showing where the next character you type will appear. See also Pointer. Device A piece of hardware that is attached to a computer and performs a specific function. There are two types of devices─disks and printers. See Device driver. Device driver Software that enables a computer to recognize and use a device. Devicename The name of a device on your computer or the name of a device assigned to connect to a shared resource. The devicename is the name by which LAN Manager and your computer identify a disk device and a printer device. Two types of devicenames are used for local-area network connections: disk devicenames (for example, E:), and printer devicenames (for example, LPT1:). See also Disk device and Printer device. Dialog box A box that appears on the LAN Manager Screen when a menu command is chosen. Dialog boxes typically present a number of options from which you can choose. Sometimes choosing an option from one dialog box causes another dialog box to appear. Directory A table of contents for a disk. The directory listing includes filenames, file sizes, and the date when the file was created or last modified. Disk device A device that stores information. Disk devices are identified by their devicenames. See also Devicename. Disk directory See Directory. Disk drive devicename See Devicename and Disk device. Domain A group of devices, servers, and workstations grouped together to simplify network administration and security. Domains have names and every computer on the local-area network belongs to at least one domain. Being logged on in one domain does not limit access to resources in other domains to which you have access. See also Logon domain, Other domains, and Workstation domain. Domain controller The server that verifies a user is allowed to log on in a domain. This server maintains a master record of user accounts. Double-click To position the mouse pointer on a character, and press and release the left mouse button twice with a quick motion. Drag To position the mouse pointer on the character that will begin or end your selection; press and hold down the left mouse button while moving your pointer to the other end of the desired selection; and release the left mouse button. Enhanced See LAN Manager Enhanced. Error log A file that stores LAN Manager error messages received by a LAN Manager Enhanced workstation. Error message A message that appears on your computer screen after LAN Manager or MS-DOS detects a problem while trying to process an operation or a command. Field One of the five areas within a dialog box. See also Check box, Command button, Dialog box, List box, Option button, and Text box. File attribute MS-DOS file attributes are read-only and archive. These attributes can be assigned to MS-DOS files and directories using the MS-DOS attrib command. Filename A unique name for a file. It can be from one to eight characters in length and can be followed by a filename extension consisting of a period (.) and one to three characters. See also Filename extension. Filename extension A period (.) and one to three characters that can be appended to a filename. For example, LAN Manager Enhanced profile files have the extension .PRO. See also Filename. Forwarding messages See Message forwarding. Home directory A directory on a server that an administrator sets aside for your personal use. Initialization file The LANMAN.INI file. This file is used by the LAN Manager software to determine the default settings for the workstation. See also LANMAN.INI. LAN See Local-area network. LAN Manager A software program that expands the features of MS-DOS to enable your computer to join a local-area network. See also Local-area network. LAN Manager Basic A version of LAN Manager that enables an MS-DOS computer to connect to local-area network directories and printers, and print jobs over the network. Using LAN Manager Basic, network tasks can be done from the command line only. LAN Manager Enhanced A version of LAN Manager that enables an MS-DOS computer to connect to local-area network directories and printers, print jobs over the network, send and receive network messages, and use profiles to automatically connect to network resources. Using LAN Manager Enhanced, network tasks can be done from the command line and from the LAN Manager Screen. LAN Manager Screen A menu-oriented, full-screen interface for LAN Manager Enhanced. With the LAN Manager Screen, you can use LAN Manager Enhanced without having to memorize command syntax. LANMAN.INI An initialization file that determines default settings for computers on the local-area network. List box An area in a LAN Manager Screen dialog box containing a list of items from which you can select. See also Scroll, Scroll bar, and Scroll box. Local Refers to a resource attached to a user's computer. See also Remote. Local resource See Local. Local-area network A group of personal computers and other hardware, attached by cable, that lets users share information and equipment. Log A file containing a historical list of information. See also Error log and Message log. Log off To remove your username and password from a LAN Manager Enhanced workstation and cancel connections to resources, but not stop LAN Manager Enhanced services. Log on To supply your username and password, which identify you as a user at a LAN Manager Enhanced workstation and as a member in a domain. See also Domain, Password, and Username. Logon domain A domain (other than the workstation domain) that is specified when you log on with LAN Manager Enhanced. See also Domain, Other domains, and Workstation domain. Logon password The password specified when logging on at a LAN Manager Enhanced workstation. See also Password. Menu A box that appears when you select a name from the menu bar on the LAN Manager Screen. A menu lists several commands from which you can choose. Menu bar The horizontal bar at the top of the LAN Manager Screen that lists the names of menus from which you choose commands. Menu command A command that can be chosen from a menu on the LAN Manager Screen. See also LAN Manager Screen, Menu, and Menu bar. Message alias See Alias. Message box A box that displays messages received at a LAN Manager Enhanced workstation when the Messenger and Netpopup services are running. See also Messenger service and Netpopup service. Message forwarding To use aliases to reroute messages from a LAN Manager Enhanced workstation to another workstation. See also Alias. Message line A message line displayed at the bottom of the LAN Manager Screen that provides information about the current menu, command, dialog box, or task. See also LAN Manager Screen. Message log A LAN Manager Enhanced file that can be used to store a workstation's messages as they are received. Message logging To save a LAN Manager Enhanced workstation's messages in a file. See also Error log and Message log. Messenger service A LAN Manager Enhanced service that enables a workstation to receive messages from other network users. This service also provides the ability to store messages in a message log file. See also Netpopup service. MS-DOS Microsoft Disk Operating System. This is the operating system on which LAN Manager Basic and Enhanced run. MS-DOS prompt See Prompt. Netpopup service A LAN Manager Enhanced service that displays messages on your computer screen as they arrive from other local-area network users or from LAN Manager. The Netpopup service requires that the Messenger service be running. See also Messenger service. Network path The computername of a server followed by the sharename of a shared resource. A server's computername is preceded by two backslashes (\\), and a sharename is preceded by one backslash (for example, \\SALES\REPORTS). You connect your workstation to a shared resource by specifying a network path. See also Computername, Resource, and Sharename. Network resource A resource that is available to local-area network users. See also Resource and Shared resource. Option Part of a command that determines how the command or service works, but which is not required. Option button A button in a LAN Manager Screen dialog box from which you can select one option from a group of options. Other domains Domains other than the logon and workstation domains in which your LAN Manager Enhanced workstation is a member. See also Domain, Logon domain, and Workstation domain. Password A word that a LAN Manager Enhanced user supplies when logging on at a workstation (the logon password) or connecting to a shared resource. The password, together with the username, establishes the user's identity on the local-area network. See also Logon password. Path The name of one or more directories (for example, REPORTS\ACCT\NORTH). See also Pathname. Pathname The name of one or more directories followed by a filename. For example, the pathname of the MONTHLY.RPT file in the REPORTS\ACCT\NORTH directory is REPORTS\ACCT\NORTH\MONTHLY.RPT. Pause To suspend a LAN Manager service. See also Continue. Permission A setting on a shared resource that determines which users can use the resource and how. Pointer A small graphic symbol that shows mouse users their location on the screen. The mouse pointer on the LAN Manager Screen is a small rectangular box. Pool A group of similar devices that receive requests from the same queue. Port A socket in the back of a hardware device (for example, a computer or printer) where a cable is plugged in. Print job A file sent to a printer queue to be printed. Printer device A device that prints information. Printer devices are identified by their devicenames. See also Devicename. Printer queue A queue that manages and routes print jobs. Privilege A privilege level is assigned for each user account. The privilege level defines the range of action a user can have on the local-area network. Profile A file containing LAN Manager Enhanced commands that automatically connect a LAN Manager Enhanced workstation to a group of shared resources. Prompt The symbol that tells you an operating system or program is ready to receive a command. You type commands at the prompt. Remote Refers to a server, workstation, or resource that is not located where you are currently working. See also Local. Resource Something that is shared over the local-area network. This includes, but is not limited to, disk drives, directories, and printers. See also Shared resource. Scroll To move data or text up and down, or left and right, in a LAN Manager Screen dialog box. Scroll bar The shaded bar that appears at the right of some LAN Manager Screen list boxes. Use the scroll bar and the mouse to scroll through a list box that contains more information than can be shown in one screen. Scroll box The small box superimposed on the scroll bar that appears at the right of some LAN Manager Screen list boxes. The scroll box reflects the position of the information within the window in relation to the total contents of the list. See also Scroll bar. Server A computer on a local-area network that controls access to resources such as files and printers. A server can also be used as a workstation. Service A program that is one of the main components of LAN Manager. Session A link between a workstation and a server. A session consists of one or more connections to shared resources. See also Connection. Setup program A program that installs LAN Manager Enhanced or Basic software on a workstation. Shared directory A disk directory on a server to which users of the local-area network have access. A shared directory contains files that are available to network users. Shared printer See Printer queue. Shared printer queue See Printer queue. Shared resource A resource available to users of the local-area network. See also Resource. Sharename A name that identifies a shared resource. See also Computername and Shared resource. Sharing The process by which resources are made available to local-area network users. Software The programs, routines, or instructions written in a computer language that instruct the computer to perform one or more tasks. Text box An area in a LAN Manager Screen dialog box where you type information. The text box may or may not contain text. Title bar The place at the top of a LAN Manager Screen dialog box where titles appear. User Someone who uses the local-area network. User account A user's record on a server or in a domain that defines the hours during which the user can log on and controls the access that the user can have to resources in the domain. Username The name a LAN Manager Enhanced user types when logging on to the local-area network. This is the name by which the user is identified on the network. Wildcard character A character, used with MS-DOS directory commands, indicating that any character can occupy the position of the wildcard character. The wildcard characters are the asterisk (*) and the question mark (?). Workstation A computer with hardware and software that enable it to run LAN Manager. Workstation domain The domain into which a LAN Manager Enhanced workstation is logged by default. Unless another domain is specified during logon, LAN Manager Enhanced uses the workstation domain. See also Domain, Logon domain, and Other domains. Workstation service A LAN Manager service that enables a computer to use network resources and services. This service must be running for any other service to run. INDEX ────────────────────────────────────────────────────────────────────────── A Accounts menu Change your password command Your account command Accounts, user changing a password viewing your account Aliases adding and deleting forwarding viewing B Batch programs using commands in C Clocks, computer synchronizing Commands {B} viewing a list of Commands, net net access net config workstation net continue {B} net continue net copy net help {B} net help net helpmsg net load net log net logoff net logon net move net name {B} net name net password net pause {B} net pause net print {B} net print net save net send net start messenger net start netpopup net start workstation {B} net start workstation net stop net time net use {B} net use net view net who working with commands abbreviating commands summary {B} commands summary expediting a command password requirements use in batch programs Computername {B} assigning setting the computername at startup viewing Config menu Load profile command Log off from LAN command Save profile command Workstation options command Configuration, workstation Connecting see Directories, shared. Printer queues. Connections {B} continuing pausing viewing Connections saving viewing Continuing a service see Messenger service. Netpopup service. Workstation service. Controlling a service see Messenger service. Netpopup service. Workstation service. Copying files see Files Country codes Current focus D Deleting see Aliases Devicenames for disk resources assigning viewing for printer queues Directories, shared {B}, using Directories, shared changing permissions for connecting to defined disconnecting from making a onetime connection using viewing connections Disconnecting from printer queue see Printer queues Disconnecting see Directories, shared. Printer queues. Disks, shared see Directories, shared Display see LAN Manager Screen Domains belonging to changing your password for a domain defined logon domain sending messages to domains synchronizing clocks in viewing servers in workstation domain E Error messages, getting help with Exiting LAN Manager Screen see LAN Manager Screen F Files, shared see also Directories, shared changing permissions for copying moving using Files copying over the network moving over the network Finding users on network see Users, viewing H Help system {B} Help system displaying a Help message box F1 key for error messages for net commands Home directory, defined L LAN Manager Screen closing dialog boxes controlling the display exiting starting LAN Manager using LAN Manager services see Messenger service. Netpopup service. Workstation service. LAN Manager quitting starting automatically starting Language of messages assigning LANMAN.INI file, defined Log see Message log Logging messages see Message log Logging off Logging on Logon domain see Domains M Message log changing the log file controlling message logging Controlling message logging default LANMAN\LOGS directory MESSAGES.LOG file reading the log saving the log file turning off message logging Message menu Aliases command deleting an alias Log messages to file command changing the log file Read message log file command Send a typed message command Messages LAN Manager assigning a language for a user Netpopup service closing a message box printing reading message log with Netpopup running receiving for several users sending broadcasting to a workstation Messenger service defined starting Moving files see Files N Net access Net config workstation Net continue {B} Net continue Net copy Net help {B} Net help Net helpmsg Net load Net log Net logoff Net logon starting the workstation Net move Net name {B} Net name Net password Net pause {B} Net pause Net print {B} Net print Net save Net send Net start messenger Net start netpopup Net start workstation {B} Net start workstation Net stop Net time Net use {B} Net use Net view Net who Net Netpopup service and message logging closing a message box starting Network products, working with others Non-LAN Manager servers, connecting to P Passwords {B}, using with net commands Passwords changing your password logging on with using with net commands Pausing a service see Messenger service. Netpopup service. Workstation service. Permissions changing defined Print jobs defined deleting finding job numbers holding and releasing restarting viewing Printer queues {B} connecting to disconnecting from viewing status Printer queues connecting to controlling queued jobs defined disconnecting from making a onetime connection printing, using the LAN Manager Screen viewing queue information server's status with several printers Printers, shared {B} Printers, shared see also Printer queues. defined Profiles creating defined loading modifying Q Quitting LAN Manager see LAN Manager R Reading messages see Netpopup service. Messages. Message log. Resources, shared defined viewing S Saving connections see Connections. Profiles. Servers viewing shared resources of viewing Services see also Messenger service. Netpopup service. Workstation service. adjusting continuing controlling defined pausing stopping Shared see Directories, shared. Printers, shared. Starting Workstation service see Workstation service. Stopping services see Messenger service. Netpopup service. Workstation service. T Time, synchronizing the workstation's clock U Users viewing with the net who command V View menu Available resources command connecting to a printer queue connecting to a shared directory viewing resources viewing shared directories Printer queues command deleting a print job viewing printer queues Used resources command connecting to a printer queue connecting to a shared directory disconnecting from a printer queue disconnecting from a shared directory viewing printer queue connections viewing resource connections Users on a server command viewing users with connections to a server Viewing see Connections. Domains. Print jobs. Printer queues. Resources, shared. S W Workstation domain see Domains Workstation service adjusting performance adjusting the display Messenger service Netpopup service pausing effect on other services starting with a batch program starting stopping viewing configuration Workstation {B} starting viewing connections Workstation viewing configuration