home *** CD-ROM | disk | FTP | other *** search
/ Media Share 9 / MEDIASHARE_09.ISO / ra / scht503r.zip / SCHT!HLP.ASC < prev    next >
Text File  |  1993-04-02  |  7KB  |  166 lines

  1.  
  2.                             How to use SabreChat!
  3.                             ---------------------
  4.  
  5.                                by Shawn Gresham
  6.  
  7. Hello,
  8.  
  9. This file is an attempt to help you learn the fundamentals of using SabreChat!
  10. to chat with other users.
  11.  
  12. Types of Chat
  13. -------------
  14.  
  15. First, I would like to begin by saying that there are two different types of
  16. chat sessions, line chat and character chat.  The difference between these two
  17. chat sessions is mere the point in which what you type is sent (or seen) by
  18. the other users.  In a character chat, each letter you type is immediately
  19. seen by the other users.  This type of session does not allow you to type at
  20. the same time as another user.  A line chat, however, waits till you are at
  21. the end of a line or have pressed ENTER before it sends the whole line the
  22. other user.  This type of chat session allows you to type at the same time as
  23. the other user because you will not be interrupted till you press ENTER to end
  24. your message.  SabreChat! supports both of these chat sessions and type used
  25. is set by the Sysop during installation.
  26.  
  27. A little hint
  28. -------------
  29.  
  30. Something that I have found to be helpful while chatting with another user is
  31. that once you have finished typing your message, press ENTER twice.  This will
  32. leave a blank line after what you have typed and will signal to the other
  33. users that you have finished and they may begin.
  34.  
  35. The commands
  36. ------------
  37.  
  38. SabreChat! offers a few commands to help you while chatting. All commands in
  39. SabreChat! begin with a '/' forward slash letter.  For example typing /QUIT
  40. will allow you to exit the chat session and return to the menu.  Commands must
  41. be the first thing on the line that you type.
  42.  
  43. Also, many commands have parameters that you can enter on the same line as the
  44. command.  For example, the /WHISPER command needs a person's name and the
  45. message to send to that person.  You could type '/WHISPER JOHN HI THERE.' or
  46. just type '/WHISPER' and answer the questions.  These short cuts are show on
  47. each of the following lines by using the <parameter> format.  For example,
  48. /WHISPER's format is '/WHISPER <person's name> <message>' meaning that you can
  49. enter the person's name and a short message on the same line as /WHISPER.
  50.  
  51. Here is a list of the commands and what they do:
  52.  
  53. /?
  54. This command shows short list of the commands available to you.
  55.  
  56. /ACTION
  57. This command shows a list of the action commands that you can use while
  58. chatting.  These are extra commands that print a message when used.  You use
  59. these commands just like any other command by typing them on the beginning of
  60. line. Also these commands are created by your sysop.  Play with them to see
  61. what they do, and you might suggest others for your sysop to add.
  62.  
  63. /BYE, /EXIT, /QUIT, and /X
  64. These four commands allow you to exit SabreChat! and return to the menu.
  65.  
  66. /COLORS
  67. This command turns on and off colors.
  68.  
  69. /EDIT
  70. This command allows you to change your alias or sex.  It also allows you to
  71. re-answer the questionnaire if the sysop has one available.
  72.  
  73. /EXPEL <user name or node number>
  74. This command is only available if you have created your own room using the
  75. /JOIN command.  It allows you to throw another user in that room back into the
  76. PUBLIC room.  I added this command for the use of moderators in room that deal
  77. with a specific subject (like ROLEPLAYING or something).  The moderator would
  78. be able to remove any user who was being unsocialable or was generally
  79. disturbing the flow of the conversation.
  80.  
  81. /GRANT <user name or node number>
  82. This command, like the /EXPEL command, is only available to the owner of a
  83. room (the one who created it with the /JOIN command).  This command allows you
  84. to pass ownership of the room to another user in that room.  This is also
  85. added for moderators who can pass their ability to someone else when they
  86. leave the conversation.
  87.  
  88. /HELP
  89. This displays a long detailed description of these commands.
  90.  
  91. /IGNORE
  92. This command turns on and off your ability to hear other people's whispers.  I
  93. added this command for those usering in a private roomm that are being
  94. harassed by a user using the /WHISPER command to irritate them.
  95.  
  96. /JOIN <room name>
  97. This command allows you to create a new room with any name you wish.  To use
  98. this you just need to type /JOIN and the name of the room. For example the
  99. following command creates a room called GIRLSONLY: '/JOIN GIRLSONLY'.  Also if
  100. you preced the room name with a '/' slash letter, then the room name will not
  101. appear on the list in the /LIST command.  People wishing to enter your private
  102. room will have to know the name that you used.  For example if you wanted to
  103. create a private room, you could type /JOIN /PASSWORD.
  104.  
  105. /LINE
  106. This command toggles between the line chat and character chat modes that I
  107. described earlier.  It is best to use the same mode that the other people are
  108. using in chat.
  109.  
  110. /LIST
  111. This command list everyone in SabreChat!.  It also shows the room that they
  112. are in.  Rooms listed as <private> can only be entered if you know the exact
  113. room name.
  114.  
  115. /LISTCONF
  116. This command lists the rooms already available and also shows the number of
  117. people in them.
  118.  
  119. /LOOK <user name>
  120. This command lets you look at another person's answers to the questionnair if
  121. your sysop has a questionnaire.  The person you wish to look at has to be in
  122. chat with you.
  123.  
  124. /ONLINE
  125. This command gives a list of every user on the BBS and what they are doing.
  126. These users can be contacted using the /PAGE command.
  127.  
  128. /PAGE <node number>
  129. This command allows you to page another user who is on the BBS.  This notifies
  130. them that you are in SabreChat! and that you wish them to join you.
  131.  
  132. /PROMPT
  133. This command toggles thru the three different prompt types.  Try them all and
  134. see which you prefer.
  135.  
  136. /TIME
  137. This command shows the currect time and the time that you have left in
  138. SabreChat!
  139.  
  140. /WHISPER <user name or node number> <message to whisper>
  141. This command allows you to send a private message to another person that ONLY
  142. he/she will see.  The person does not have to be in your room, but they have
  143. to be in SabreChat!.
  144.  
  145. /<user name> <message>
  146. This is a short cut to the /WHISPER command.  By typing another person's name
  147. preceded by a / will allow you to send a private message that only he/she can
  148. see.
  149.  
  150. Good Luck
  151. ---------
  152.  
  153. Well, there you go... If you have any problems, drop a message to your sysop
  154. and he/she should be able to help you thru any difficulty you are having.
  155. Also, if you have any ideas that would make SabreChat! neater or easier to
  156. use, leave a message to your sysop, and maybe he/she can get it to me for the
  157. next version.
  158.  
  159.         See Ya'll Later and have fun!!!!!!
  160.         Shawn Gresham
  161.         Maximum Intensity BBS 1:19/129
  162.  
  163. ------------------------------------------------------------------------------
  164.                  SabreChat! Copyright (C) 1993 Shawn Gresham
  165.  
  166.