Media Share 9/MEDIASHARE_09.ISO/pcboard/uupcb100.zip/EMILY

Text File | 1992-10-02 | 19KB | 407 lines

Xref: tridom news.announce.newusers:37 news.answers:580
Path: tridom!emory!europa.asd.contel.com!darwin.sura.net!spool.mu.edu!news.cs.indiana.edu!purdue!spaf
From: [e-mail] (Gene Spafford)
Newsgroups: news.announce.newusers,news.answers
Subject: Emily Postnews Answers Your Questions on Netiquette
Message-ID: <[e-mail]>
Date: 20 Sep 92 04:17:33 GMT
Expires: 19 Nov 92 16:17:33 GMT
Reply-To: [e-mail]
Followup-To: news.newusers.questions
Organization: Dept. of Computer Sciences, Purdue Univ.
Lines: 387
Approved: [e-mail]
Supersedes: <[e-mail]>

Original-author: [e-mail] (Brad Templeton)
Archive-name: emily-postnews/part1
Last-change: 30 Nov 91 by [e-mail] (Brad Templeton)


**NOTE: this is intended to be satirical.  If you do not recognize
  it as such, consult a doctor or professional comedian.  The
  recommendations in this article should recognized for what
  they are -- admonitions about what NOT to do.


                        "Dear Emily Postnews"

        Emily Postnews, foremost authority on proper net behaviour,
        gives her advice on how to act on the net.

============================================================================

Dear Miss Postnews: How long should my signature be? -- verbose@noisy

A: Dear Verbose: Please try and make your signature as long as you
can.  It's much more important than your article, of course, so try
to have more lines of signature than actual text.

Try to include a large graphic made of ASCII characters, plus lots of
cute quotes and slogans.  People will never tire of reading these
pearls of wisdom again and again, and you will soon become personally
associated with the joy each reader feels at seeing yet another
delightful repeat of your signature.

Be sure as well to include a complete map of USENET with each
signature, to show how anybody can get mail to you from any site in
the world.  Be sure to include Internet gateways as well.  Also tell
people on your own site how to mail to you.  Give independent
addresses for Internet, UUCP, and BITNET, even if they're all the
same.

Aside from your reply address, include your full name, company and
organization.  It's just common courtesy -- after all, in some
newsreaders people have to type an *entire* keystroke to go back to
the top of your article to see this information in the header.

By all means include your phone number and street address in every
single article.  People are always responding to usenet articles with
phone calls and letters.  It would be silly to go to the extra trouble
of including this information only in articles that need a response by
conventional channels!
                                ------
Dear Emily: Today I posted an article and forgot to include my
signature.  What should I do?  -- forgetful@myvax

A: Dear Forgetful: Rush to your terminal right away and post an
article that says, "Oops, I forgot to post my signature with that last
article.  Here it is."

Since most people will have forgotten your earlier article,
(particularly since it dared to be so boring as to not have a nice,
juicy signature) this will remind them of it.  Besides, people care
much more about the signature anyway.  See the previous letter for
more important details.

Also, be sure to include your signature TWICE in each article.  That
way you're sure people will read it.

                                ------
Dear Ms. Postnews: I couldn't get mail through to somebody on another
site.  What should I do? -- [e-mail]

A: Dear Eager: No problem, just post your message to a group that a
lot of people read.  Say, "This is for John Smith.  I couldn't get
mail through so I'm posting it.  All others please ignore."

This way tens of thousands of people will spend a few seconds scanning
over and ignoring your article, using up over 16 man-hours their
collective time, but you will be saved the terrible trouble of
checking through Usenet maps or looking for alternate routes.  Just
think, if you couldn't distribute your message to 30,000 other
computers, you might actually have to (gasp) call directory assistance
for 60 cents, or even phone the person.  This can cost as much as a
few DOLLARS (!) for a 5 minute call!

And certainly it's better to spend 10 to 20 dollars of other people's
money distributing the message then for you to have to waste $9 on an
overnight letter, or even 29 cents on a stamp!

Don't forget.  The world will end if your message doesn't get through,
so post it as many places as you can.

                                ------
Q: What about a test message?

A: It is important, when testing, to test the entire net.  Never test
merely a subnet distribution when the whole net can be done.  Also put
"please ignore" on your test messages, since we all know that
everybody always skips a message with a line like that.  Don't use a
subject like "My sex is female but I demand to be addressed as male."
because such articles are read in depth by all USEnauts.

                                ------
Q: Somebody just posted that Roman Polanski directed Star Wars.  What
should I do?

A: Post the correct answer at once!  We can't have people go on
believing that!  Very good of you to spot this.  You'll probably be
the only one to make the correction, so post as soon as you can.  No
time to lose, so certainly don't wait a day, or check to see if
somebody else has made the correction.

And it's not good enough to send the message by mail.  Since you're
the only one who really knows that it was Francis Coppola, you have to
inform the whole net right away!

                                ------
Q: I read an article that said, "reply by mail, I'll summarize."  What
should I do?

A: Post your response to the whole net.  That request applies only to
dumb people who don't have something interesting to say.  Your
postings are much more worthwhile than other people's, so it would be
a waste to reply by mail.

                                ------
Q: I collected replies to an article I wrote, and now it's time to
summarize.  What should I do?

A: Simply concatenate all the articles together into a big file and
post that.  On USENET, this is known as a summary.  It lets people
read all the replies without annoying newsreaders getting in the way.
Do the same when summarizing a vote.

                                ------
Q: I saw a long article that I wish to rebut carefully, what should I
do?

A: Include the entire text with your article, particularly the
signature, and include your comments closely packed between the lines.

Be sure to post, and not mail, even though your article looks like a
reply to the original.  Everybody *loves* to read those long
point-by-point debates, especially when they evolve into name-calling
and lots of "Is too!" -- "Is not!" -- "Is too, twizot!" exchanges.

Be sure to follow-up everything, and never let another person get in
the last word on a net debate.  Why, if people let other people have
the last word, then discussions would actually stop!  Remember, other
net readers aren't nearly as clever as you, and if somebody posts
something wrong, the readers can't possibly realize that on their own
without your elucidations.  If somebody gets insulting in their net
postings, the best response is to get right down to their level and
fire a return salvo.  When I read one net person make an insulting
attack on another, I always immediately take it as gospel unless a
rebuttal is posted.  It never makes me think less of the insulter, so
it's your duty to respond.

                                ------
Q: How can I choose what groups to post in?

A: Pick as many as you can, so that you get the widest audience.
After all, the net exists to give you an audience.  Ignore those who
suggest you should only use groups where you think the article is
highly appropriate.  Pick all groups where anybody might even be
slightly interested.

Always make sure followups go to all the groups.  In the rare event
that you post a followup which contains something original, make sure
you expand the list of groups.  Never include a "Followup-to:" line in
the header, since some people might miss part of the valuable
discussion in the fringe groups.

                                ------
Q: How about an example?

A: Ok.  Let's say you want to report that Gretzky has been traded from
the Oilers to the Kings.  Now right away you might think
rec.sport.hockey would be enough.  WRONG.  Many more people might be
interested.  This is a big trade!  Since it's a NEWS article, it
belongs in the news.* hierarchy as well.  If you are a news admin, or
there is one on your machine, try news.admin.  If not, use news.misc.

The Oilers are probably interested in geology, so try sci.geo.fluids.
He is a big star, so post to sci.astro, and sci.space because they are
also interested in stars.  And of course comp.dcom.telecom because he
was born in the birthplace of the telephone.  And because he's
Canadian, post to soc.culture.Ontario.southwestern.  But that group
doesn't exist, so cross-post to news.groups suggesting it should be
created.  With this many groups of interest, your article will be
quite bizarre, so post to talk.bizarre as well.  (And post to
comp.std.mumps, since they hardly get any articles there, and a "comp"
group will propagate your article further.)

You may also find it is more fun to post the article once in each
group.  If you list all the newsgroups in the same article, some
newsreaders will only show the the article to the reader once!  Don't
tolerate this.

                                ------
Q: How do I create a newsgroup?

A: The easiest way goes something like "inews -C newgroup ....", and
while that will stir up lots of conversation about your new newsgroup,
it might not be enough.

First post a message in news.groups describing the group.  This is a
"call for discussion."  (If you see a call for discussion, immediately
post a one line message saying that you like or dislike the group.)
When proposing the group, pick a name with a TLA (three-letter
acronym) that will be understood only by "in" readers of the group.

After the call for discussion, post the call for flames, followed by a
call for arguments about the name and a call for run-on puns.
Eventually make a call for "votes." USENET is a democracy, so voters
can now all post their votes to ensure they get to all 30,000 machines
instead of just the person counting. Every few days post a long
summary of all the votes so that people can complain about bad mailers
and double votes.  It means you'll be more popular and get lots of
mail.  At the end of 21 days you can post the vote results so that
people can argue about all the technical violations of the guidelines
you made.  Blame them on the moderator-of-the-week for
news.announce.newgroups.  Then your group might be created.

To liven up discussion, choose a good cross-match for your hierarchy
and group.  For example, comp.race.formula1 or soc.vlsi.design would
be good group names.  If you want your group created quickly, include
an interesting word like "sex" or "activism."  To avoid limiting
discussion, make the name as broad as possible, and don't forget that
TLA.

If possible, count votes from a leaf site with a once-a-week polled
connection to botswanavax.  Schedule the vote during your relay site's
head crash if possible.

Under no circumstances use the trial group method, because it
eliminates the discussion, flame, pun, voting and guideline-violation
accusation phases, thus taking all the fun out of it.  To create an
ALT group, simply issue the creation command.  Then issue an rmgroup
and some more newgroup messages to save other netters the trouble of
doing that part.

                                ------
Q: I cant spell worth a dam.  I hope your going too tell me what to
do?

A: Don't worry about how your articles look.  Remember it's the
message that counts, not the way it's presented.  Ignore the fact that
sloppy spelling in a purely written forum sends out the same silent
messages that soiled clothing would when addressing an audience.

                                ------
Q: How should I pick a subject for my articles?

A: Keep it short and meaningless.  That way people will be forced to
actually read your article to find out what's in it.  This means a
bigger audience for you, and we all know that's what the net is for.
If you do a followup, be sure and keep the same subject, even if it's
totally meaningless and not part of the same discussion.  If you
don't, you won't catch all the people who are looking for stuff on the
original topic, and that means less audience for you.

                                ------
Q: What sort of tone should I take in my article?

A: Be as outrageous as possible.  If you don't say outlandish things,
and fill your article with libelous insults of net people, you may not
stick out enough in the flood of articles to get a response.  The more
insane your posting looks, the more likely it is that you'll get lots
of followups.  The net is here, after all, so that you can get lots of
attention.

If your article is polite, reasoned and to the point, you may only get

mailed replies.  Yuck!

                                ------
Q: The posting software suggested I had too long a signature and too
many lines of included text in my article.  What's the best course?

A: Such restrictions were put in the software for no reason at all, so
don't even try to figure out why they might apply to your article.
Turns out most people search the net to find nice articles that
consist of the complete text of an earlier article plus a few lines.

In order to help these people, fill your article with dummy original
lines to get past the restrictions.  Everybody will thank you for it.

For your signature, I know it's tough, but you will have to read it in
with the editor.  Do this twice to make sure it's firmly in there.  By
the way, to show your support for the free distribution of
information, be sure to include a copyright message forbidding
transmission of your article to sites whose USENET politics you don't
like.

Also, if you do have a lot of free time and want to trim down the text
in your article, be sure to delete some of the attribution lines so
that it looks like the original author of -- say -- a plea for world
peace actually wrote the followup calling for the nuking of Bermuda.

                                ------
Q: They just announced on the radio that the United States has invaded
Iraq.  Should I post?

A: Of course.  The net can reach people in as few as 3 to 5 days.
It's the perfect way to inform people about such news events long
after the broadcast networks have covered them.  As you are probably
the only person to have heard the news on the radio, be sure to post
as soon as you can.

                                ------
Q: I have this great joke.  You see, these three strings walk into a
bar...

A: Oh dear.  Don't spoil it for me.  Submit it to rec.humor, and post
it to the moderator of rec.humor.funny at the same time.  I'm sure
he's never seen that joke.

                                ------
Q: What computer should I buy?  An Atari ST or an Amiga?

A: Cross post that question to the Atari and Amiga groups.  It's an
interesting and novel question that I am sure they would love to
investigate in those groups.  There is no need to read the groups in
advance or examine the "frequently asked question" lists to see if the
topic has already been dealt with.  In fact, you don't need to read
the group at all, and you can tell people that in your query.

                                ------
Q: What about other important questions?  How should I know when to
post?

A: Always post them.  It would be a big waste of your time to find a
knowledgeable user in one of the groups and ask through private mail
if the topic has already come up.  Much easier to bother thousands of
people with the same question.

                                ------
Q: Somebody just posted a query to the net, and I want to get the
answer too.  What should I do?

A: Immediately post a following, including the complete text of the
query.  At the bottom add, "Me too!"  If somebody else has done this,
follow up their article and add "Me three," or whatever number is
appropriate.  Don't forget your full signature.  After all, if you
just mail the original poster and ask for a copy of the answers, you
will simply clutter the poster's mailbox, and save people who do
answer the question the joyful duty of noting all the "me (n)s" and
sending off all the multiple copies.

                                ------
Q: What is the measure of a worthwhile group?

A: Why, it's Volume, Volume, Volume.  Any group that has lots of noise
in it must be good.  Remember, the higher the volume of material in a
group, the higher percentage of useful, factual and insightful
articles you will find.  In fact, if a group can't demonstrate a high
enough volume, it should be deleted from the net.

                                ------
Q: Emily, I'm having a serious disagreement with somebody on the net.
I tried complaints to his sysadmin, organizing mail campaigns, called
for his removal from the net and phoning his employer to get him
fired.  Everybody laughed at me.  What can I do?

A: Go to the daily papers.  Most modern reporters are top-notch
computer experts who will understand the net, and your problems,
perfectly.  They will print careful, reasoned stories without any
errors at all, and surely represent the situation properly to the
public.  The public will also all act wisely, as they are also fully
cognizant of the subtle nature of net society.

Papers never sensationalize or distort, so be sure to point out things
like racism and sexism wherever they might exist.  Be sure as well
that they understand that all things on the net, particularly insults,
are meant literally.  Link what transpires on the net to the causes of
the Holocaust, if possible.  If regular papers won't take the story,
go to a tabloid paper -- they are always interested in good stories.

By arranging all this free publicity for the net, you'll become very
well known.  People on the net will wait in eager anticipation for
your every posting, and refer to you constantly.  You'll get more mail
than you ever dreamed possible -- the ultimate in net success.

                                ------
Q: What does foobar stand for?

A: It stands for you, dear.
--
Gene Spafford
Software Engineering Research Center & Dept. of Computer Sciences
Purdue University, W. Lafayette IN 47907-1398
Internet:  [e-mail]   phone:  [phone]