home *** CD-ROM | disk | FTP | other *** search
/ Media Share 9 / MEDIASHARE_09.ISO / network / autopi.zip / README.TXT < prev    next >
Text File  |  1992-03-18  |  6KB  |  130 lines

  1.                             AutoPilott Menu System
  2.  
  3. Copyright (c) 1990-1992. Pilott Systems, Anchorage, AK.  All Rights Reserved.
  4. -----------------------------------------------------------------------------
  5.  
  6.  
  7. Quick Installation Instructions:
  8.  
  9.      To install AutoPilott in less than 5 minutes, follow these simple steps!
  10.  
  11.      1.   Login as user SUPERVISOR.
  12.  
  13.      2.   Insert the distribution disk into your floppy drive.
  14.  
  15.      3.   Switch to that drive and run the command: INSTALL
  16.  
  17.           If you are using Novell NetWare, then answer "Yes" when prompted.
  18.  
  19.           Please let AutoPilott install at the default location prompted.
  20.  
  21.           If you would like the install program to add a search drive to the
  22.           AutoPilott directory (for NetWare only) then answer "Yes" when
  23.           prompted to edit the System Login Script.
  24.  
  25.           If you would like the install program to make AutoPilott execute
  26.           automaticaly when your machine "boots" then answer "Yes" when
  27.           prompted.
  28.  
  29.           If you have a Novell menu script you would like to convert, be sure to
  30.           specify the name of that file when asked.
  31.  
  32.      5.   AutoPilott is now installed.
  33.  
  34.           Use your <Ins> key to start adding new menu options.
  35.  
  36.      6.   Type AUTO /M to start AutoPilott again in Maintenance mode.
  37.  
  38.  
  39. For example:
  40.  
  41.      LOGIN SUPERVISOR <CR>    (then enter your password)
  42.      A: <CR>                  (assuming the AutoPilott disk is in A:)
  43.      INSTALL <CR>             (then follow the instructions)
  44.  
  45. NOTE: To go back and re-edit your menu, be sure to start AutoPilott using
  46. the command:  AUTO /M
  47.  
  48. Most people will agree that the Novell menu system, while the user interface is
  49. great, has a few problems.  Fortunately the problems effect only the System
  50. Manager.  The AutoPilott Menu System has the same look and feel of NetWare,
  51. yet it solves ALL of the problems.
  52.  
  53. AutoPilott does not use any RAM in the workstation, nor does it create any
  54. temporary files.  Are you tired of GO00X.BAT and RESTART.00X files all over the
  55. network?  Since AutoPilott does not use temporary files, the users need only
  56. Read, Open, and Search (or Read and File scan) rights to use it.  Unlike many
  57. other menus, changes to the AutoPilott menu can be made without disturbing
  58. active users.
  59.  
  60. Have you ever wondered why you can press <Ins> in SysCon to add a user but you
  61. have to program a complex script file to add a menu option?  AutoPilott allows
  62. the System Manager to add menu commands and sub-menus with the same keystrokes
  63. used in SysCon.  Just press <Ins> to insert a command or sub-menu, <Del> to
  64. delete one, and <F3> to modify.  You may even "cut and paste" sub-menus and
  65. commands!
  66.  
  67. One of the most important features of AutoPilott is what is called "Intelligent
  68. Command Filtering". Many third party menus re-invent the wheel by defining
  69. groups or other mechanisms to have different menus for different types of
  70. users.  For example, some users have access to accounting while others may not.
  71. AutoPilott allows you to create one master menu and looks on the network or
  72. local drive to make sure each user has access to that program (or it is
  73. installed) before displaying it in their menu.  In effect, to remove an option
  74. from a user's menu you simply take away their rights to that directory.
  75.  
  76. AutoPilott also allows the filtering by NetWare Users and Groups, or the
  77. Internet Address.  Filtering by User or Group may never be required when
  78. "Intelligent Command Filtering" is used.  By selecting certain Users or Groups
  79. per command, the command will only appear if that User or a member of that
  80. Group is using the menu.  Filtering by internet address restricts the command
  81. to certain stations regardless of the user currently logged in.  This is
  82. useful for communications programs or tape backup software where the application
  83. expects a certain device to exist on that workstation.
  84.  
  85. Since AutoPilott can be installed under the SYS:LOGIN directory, it may be used
  86. before, during and after logging into the network.  It allows easy integration
  87. of local hard drive environments and the network.  Most users will start
  88. AutoPilott from their AUTOEXEC.BAT file and never see the DOS prompt.  In fact,
  89. exit to the DOS prompt can be password protected.
  90.  
  91. AutoPilott was designed to be simple and intuitive to use, easy to install and
  92. forgiving to System Managers who have their own style.  Since it was programmed
  93. using the same library routines as the Novell utilities, AutoPilott has the same
  94. look and feel as the Novell menu.  The end users may not even know you have
  95. switched menu systems!
  96.  
  97. If you're interested by this point, you may be wondering how long it will take
  98. you to convert a Novell menu script to the AutoPilott Menu System.  It takes
  99. about 1 second.  The installation program included that will convert a Novell
  100. menu script directly into AutoPilott data files.
  101.  
  102.  
  103. DISK FILES:
  104.  
  105.    README.TXT      - This file
  106.    AUTOPILT.EXE    - AutoPilott main program
  107.    AUTO.BAT        - AutoPilott start up command
  108.    MAIN.BAT        - Command sets for menu selections (will be created)
  109.    MAIN.DAT        - Command set menu definition file (will be created)
  110.    PILOTERR.DAT    - AutoPilott system file
  111.    PILOTMSG.DAT    - AutoPilott system file
  112.    PILOTHLP.DAT    - AutoPilott system file
  113.    AUTOPILT.HLP    - AutoPilott system file
  114.    IBM$RUN.OVL     - AutoPilott system file
  115.    CMPQ$RUN.OVL    - AutoPilott system file
  116.    $RUN.OVL        - AutoPilott system file
  117.    APFIX.EXE       - A utility to compress and restructure menu set files
  118.  
  119.  
  120.  
  121. AutoPilott is packaged with a printed manual and both 5.25" and 3.5" disks.
  122. If you have more questions or would like reseller information, please send
  123. email to CompuServe account [70262,3005] or call or write to:
  124.  
  125.         Pilott Systems
  126.         13210 Old Seward Hwy. STE 14
  127.         Anchorage, AK 99515-4052
  128.         (907)-345-7458
  129.  
  130.