home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Mega CD-ROM 1
/
megacd_rom_1.zip
/
megacd_rom_1
/
MAGAZINE
/
PROGJOUR
/
PJ_5_4.ZIP
/
PJ4-L3.ASM
< prev
next >
Wrap
Assembly Source File
|
1987-10-12
|
3KB
|
102 lines
; Listing 3.
; Program to illustrate operation of set/reset circuitry in conjunction
; with CPU data to modify setting of memory that already contains data.
; Assembled with MASM 4.0, linked with LINK 3.51.
; Copyright by Michael Abrash, 4/26/87.
;
stack segment para stack 'STACK'
db 512 dup(?)
stack ends
;
EGA_VIDEO_SEGMENT equ 0a000h ;EGA display memory segment
;
; EGA register equates.
;
TS_INDEX equ 3c4h ;TS index register
TS_MAP_MASK equ 2 ;TS map mask register
GC_INDEX equ 3ceh ;GC index register
GC_SET_RESET equ 0 ;GC set/reset register
GC_ENABLE_SET_RESET equ 1 ;GC enable set/reset register
;
; Macro to set indexed register INDEX of TS chip to SETTING.
;
SETTS macro INDEX, SETTING
mov dx,TS_INDEX
mov al,INDEX
out dx,al
inc dx
mov al,SETTING
out dx,al
dec dx
endm
;
; Macro to set indexed register INDEX of GC chip to SETTING.
;
SETGC macro INDEX, SETTING
mov dx,GC_INDEX
mov al,INDEX
out dx,al
inc dx
mov al,SETTING
out dx,al
dec dx
endm
;
cseg segment para public 'CODE'
assume cs:cseg
start proc near
;
; Select 640x350 graphics mode.
;
mov ax,010h
int 10h
;
mov ax,EGA_VIDEO_SEGMENT
mov es,ax ;point to video memory
;
; Draw 18 10-scan-line high horizontal bars in green, 10 scan lines apart.
;
SETTS TS_MAP_MASK,02h ;map mask setting enables only
; plane 1, the green plane
sub di,di ;start at beginning of video memory
mov al,0ffh
mov bp,18 ;# bars to draw
HorzBarLoop:
mov cx,80*10 ;# bytes per horizontal bar
rep stosb ;draw bar
add di,80*10 ;point to start of next bar
dec bp
jnz HorzBarLoop
;
; Fill screen with alternating bars of red and brown, using CPU data
; to set plane 1 and set/reset to set planes 0, 2 & 3.
;
SETTS TS_MAP_MASK,0fh ;must set map mask to enable all
; planes, so set/reset values can
; be written to planes 0, 2 & 3
; and CPU data can be written to
; plane 1 (the green plane)
SETGC GC_ENABLE_SET_RESET,0dh ;CPU data to planes 0, 2 & 3 will be
; replaced by set/reset value
SETGC GC_SET_RESET,04h ;set/reset value is 0ffh for plane 2
; (the red plane) and 0 for other
; planes
sub di,di
mov cx,80*350/2 ;# words per screen
mov ax,07e0h ;CPU data controls only plane 1;
; set/reset controls other planes
rep stosw ;perform fill (affects all planes)
;
; Turn off set/reset.
;
SETGC GC_ENABLE_SET_RESET,0
;
; Exit to DOS.
;
mov ah,4ch
int 21h
start endp
cseg ends
end start