home *** CD-ROM | disk | FTP | other *** search
- OSWAMOUS - MOUSE DOES NOT WORK IN WINOS2 USING WARP
- 11/22/94
-
- ================================================================
- MOUSE DOES NOT WORK IN WINOS2 USING WARP 3.0
- ================================================================
-
-
- SYMPTOM:
- 1. In a WINOS2 full screen session there IS a white
- mouse pointer in the middle of the screen. The mouse
- does not move.
-
- 2 In a seamless WINOS2 session, the mouse pointer is
- black on the OS/2 desktop. When the mouse pointer is
- moved over the seamless session, the pointer turns
- into an hour glass.
-
- In both cases the keyboard works.
-
-
- RESOLUTION:
-
- Check the IRQ settings, there is probably an IRQ confilct
- between serial ports. If mouse is on COM1, then disable COM3 or
- assign it to another IRQ. You can change COM3 and COM4 IRQ's and
- address, for example:
-
- X:\OS2\COM.SYS(3.03e8,2)
-
- NOTE:
-
- If you want to use IRQ5, LPT port #2 must be disabled.
-
- If you use IRQ 2 or 9, remember that these are cascaded
- IRQ's.
-
-
- ----------------------------------------------------------------
- IBM disclaims all warranties, whether express or implied,
- including without limitation, warranties of fitness and
- merchantability with respect to the information in this document.
- By furnishing this document, IBM grants no licenses to any
- related patents or copyrights.
-