home *** CD-ROM | disk | FTP | other *** search
- TITLE: 941123 INSTALLING WARP ON A SYSTEM WITH CDROM (TOSHIBA)
- CONNECTED TO AN ADAPTEC 1542C, GETTING A RED SCREEN NO
- CDROM DEVICE SUPPORT FOUND.
-
- DESCRIPTION OF SYMPTOMS:
- Red screen on DISK #1, message no cdrom device support found.
-
- RESOLUTION:
- Under the Adaptec setting option (Ctrl+A), disable the FAST
- SCSI and Synchronize option.
- This will enabled OS/2 WARP install DISK #1 to recognize the
- cdrom.
- Note: The system has also a SoundBlaster card, but the
- cdrom (Toshiba) is connected to the Adaptec 1542C SCSI
- controller.
-
-
-
-
-