home *** CD-ROM | disk | FTP | other *** search
- The file RLZRUN20.RTS must be copied to x:\OS2\RLZRUN20\,
- where x is the drive that OS/2 starts from.
-
- Realizer 2.0A is slow on some graphics functions! It is also event driven.
- Some things have to be done differently than other paint programs.
-
- Paint 1.00 PM will only work with 256 color Windows BMPs.
- Programs like PMJPEG and GALLERIA are good for translating files.
-
- Do not File Save after File View! It is best to use New or Open after viewing.
- Viewed files are not loaded into memory.
-
- In Full Screen, press Alt then arrow keys to access menus.
-
- For drawing lines, use the left and right mouse buttons in combination.
-
- Use the Set button on Color to change the secondary colors.
-
- On the Editor, use the middle box area to move about.
- The area being edited may be covered by another window, like Toolbar.
- There are two colors for each mouse button.
- Use the Get button and select a upper box to read the color.
- This sets the primary left or right mouse color also.
-
- For the Copier, use Locate for upper left and lower right points.
- Then use Copy. After that the Paste-er can be used to Paste.
-
- Some things require two mouse clicks.
-
- Hopefully the rest will be easy to figure out.
- You may use a text editor on this file to include notes.
-
- The program CONVERT.EXE is included, but is not required.
- It is handy for converting BMPs to Paint's native colors.
-
- On rare times when Realizer is interupted, it may miss drawing some dots.
- In this case it is best to save to a temperary file and re-open to check.
-
- I hope someone else writes a better/cheap paint program.
- Written by Kenneth Neal, homephone 913-749-4523.
- Work completed Jan 13, 1995.