home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Media Share 13
/
mediashare_13.zip
/
mediashare_13
/
ZIPPED
/
PROGRAM
/
PBWTD13.ZIP
/
VENDINFO.DIZ
< prev
next >
Wrap
VENDINFO
|
1994-03-07
|
15KB
|
305 lines
┌────────────────────────────────────────────────────────────────────┐
│ PB/WORKSHOP(tm) TEST DRIVE v1.03 │
│ SEE BELOW FOR PRODUCT INFORMATION │
└────────────────────────────────────────────────────────────────────┘
┌────────────────────────────────────────────────────────────────────┐
│ This is a VENDINFO Product Information Record │
│ │
│ This record is a means of conveying information about a software │
│ product from the author to distributors and users. It contains a │
│ normal, "human-readable" section (you're reading it now), followed │
│ by a compressed data record. The data record contains a great │
│ deal of information in a form useable by automated tools. This │
│ allows BBSes, disk vendors, etc. to test automatically for │
│ permission to distribute, and to automatically extract product │
│ information for use in BBS files databases, vendor catalogs, etc. │
│ │
│ The VENDINFO file standard is published and is freely useable. │
│ │
│ The VENDINFO toolset includes a free end-user viewer, processing │
│ tools for use by distributors (BBSes, shareware disk vendors, │
│ etc.), and the editor used by author/publishers to produce these │
│ records. These tools are either free or very-low cost shareware. │
│ The toolset can be obtained from many sources, including the │
│ originators of VENDINFO: │
│ │
│ Rams' Island Software Voice: 303-841-2848 CompuServe: 76244,324 │
│ 7644 E. Lakecliff Way BBS: 303-841-6269 FidoNet: 1:104/333 │
│ Parker, CO 80134-5904 USA RIME: RAMSISLE │
└────────────────────────────────────────────────────────────────────┘
VENDINFO standard v1.00, produced by VendEdit v1.00, 7-Mar-1994
===== Product Information ==============================
Product: PB/WORKSHOP(tm) TEST DRIVE VISUAL DESIGNER for PowerBASIC 3.0
Version: 1.03
Version Date: 7-Mar-1994
Product Type: Software
Basic Distribution Policy (see License, below, for details):
Demonstration product, freely distributable by all channels
Product Description: PB/WORKSHOP(tm) TEST DRIVE v1.03. Visual
Interface Designer for PowerBASIC 3.0.
Working demonstration of PB/WORKSHOP(tm)
VISUAL INTERFACE DESIGNER for PowerBASIC 3.0.
PB/WORKSHOP is included with the commercial
software package PB/VISION PROFESSIONAL
DEVELOPMENT SYSTEM.
Category: BASIC
Keywords: POWERBASIC INTERFACE CASE DESIGN TOOLBOX
GRAPHICS GUI
Required Packages: PBWTD13
This Package: PBWTD13
Required Configuration
Processor Family: Intel 80x86 (minimum 8086/8088)
Minimum OS: MS-DOS 3.1
Standard RAM: 640K
Hard Drive Space: 600K
Required:
Hard drive
Req'd Software: PowerBASIC 3.0.
Orders:
Address: DSE Software Publishing
Post Office Box 96
Willits, CA 95490-0096
USA
Phone: 707-459-4358
FAX: 707-459-4484
BBS Name: DSE Online!
BBS Phone: 707-459-4484
Genie: DSE.SOFTWARE
FidoNet: 1:125/123
Internet: dse.software@genie.geis.com
Support:
Address: DSE Software Publishing
Post Office Box 96
Willits, CA 95490-0096
USA
Phone: 707-459-4358
FAX: 707-459-4484
BBS Name: DSE Online!
BBS Phone: 707-459-4484
Genie: DSE.SOFTWARE
FidoNet: 1:125/123
Internet: dse.software@genie.geis.com
===== Information for Users ("READ-ME") ================
This package contains the PB/WORKSHOP(tm) VISUAL INTERFACE DESIGNER -
TEST DRIVE Version 1.03, by DSE SOFTWARE PUBLISHING. This document
contains only a brief description of the package and its features, along
with instructions for its installation. Quite detailed documentation is
included in the package, but it is in archived form, and is more easily
read after installation.
PB/WORKSHOP(tm) TEST DRIVE is a demonstration program. This evaluation
version includes all features of the program, with the exception of the
ability to generate source code or compile resource files. These
options are enabled in the commercial release version.
If you like the program, and wish to purchase the actual product, you
are required to pay for the program (see ORDER_ME.TXT for more details).
Any fee you may have paid to others (disk vendors, dealers, etc.) to
obtain this evaluation version was a fee for their copying and
distribution services, rather than a payment for continued use of the
program.
===== Packing List =====================================
As released by the author or publisher, this package contained the
following files in addition to this VENDINFO.DIZ:
Filename Size Date Time CRC32
READ_ME.1ST 216 7-Mar-1994 01:03a EB5EF01B
READ_ME.BAT 438 7-Mar-1994 01:03a A08221A5
FILE_ID.DIZ 286 7-Mar-1994 01:03a 89E071A8
VENDOR.DOC 216 7-Mar-1994 01:03a 8C5E6214
INSTALL.EXE 12944 7-Mar-1994 01:03a 8494AB75
COWBASE.LXA 348 7-Mar-1994 01:03a 7027F53D
PBWDEMO.LXA 348 7-Mar-1994 01:03a 7027F53D
PRINTDOC.LXA 348 7-Mar-1994 01:03a 7027F53D
RC.LXA 5924 7-Mar-1994 01:03a 07C5C71E
RESTEST.LXA 348 7-Mar-1994 01:03a 7027F53D
WORKSHOP.LXA 209404 7-Mar-1994 01:03a 44AA7C28
DESC.SDI 34 7-Mar-1994 01:03a 39C9B9A9
VENDOR.TXT 216 7-Mar-1994 01:03a 8C5E6214
===== Installation =====================================
The installation procedure for PB/WORKSHOP(tm) TEST DRIVE is quite
simple. The package includes a program, "INSTALL.EXE", which automates
the entire process. You will need about 600k of available disk space on
the hard drive on which you plan to install PB/WORKSHOP(tm) TEST DRIVE.
The exact steps you need to take will depend on how you received
PB/WORKSHOP(tm) TEST DRIVE.
INSTALLING FROM DISKETTES
To install from diskette(s), you need to perform the following steps.
o Place PB/WORKSHOP(tm) TEST DRIVE distribution diskette "Disk 1" in
the appropriate diskette drive.
o Execute the "INSTALL.EXE" program on the distribution diskette.
For example, if the distribution diskette is on drive A:, type the
MS-DOS command, "a:install".
o Follow the instructions presented by the installation program.
You will have a chance to approve installation before any changes
are actually made to the contents of your hard drive. The program
will ask you for a destination directory, and will copy the
PB/WORKSHOP(tm) TEST DRIVE files to that directory. If you
received PB/WORKSHOP(tm) TEST DRIVE on two diskettes, you will
need to insert Disk 2 in the diskette drive when asked to do so.
If you so direct it, the installation program will install
executable programs and documentation in other directories of your
choice. It will make no other changes; specifically, it will not
modify your autoexec.bat or config.sys files.
INSTALLING FROM A HARD DRIVE
If you downloaded PB/WORKSHOP(tm) TEST DRIVE from a BBS (or received it
in the form of archive files from some other source), you will need to
perform the following steps.
o Extract the contents of the archive file(s) in a temporary
directory on your hard drive. The procedure for doing this
varies, depending on the form in which you received the package.
In all likelihood, the fact that you are reading this text means
that you already have the necessary tools and knowledge to perform
this step. If not, you should be able to obtain directions for
this from the same source from which you received the package.
o Execute the "INSTALL.EXE" program which you have extracted. For
example, if the temporary directory into which you have extracted
the PB/WORKSHOP(tm) TEST DRIVE package is C:\TEMPDIR, you would
execute the MS-DOS command, "c:\tempdir\install".
o Follow the instructions presented by the installation program.
You will have a chance to approve installation before any changes
are actually made to the contents of your hard drive. The program
will ask you for a destination directory, and will copy the
PB/WORKSHOP(tm) TEST DRIVE files to that directory. If you so
direct it, the installation program will install executable
programs and documentation in other directories of your choice.
It will make no other changes; specifically, it will not modify
your autoexec.bat or config.sys files.
When you're satisfied that the installation was successful, you should
delete the temporary directory FROM which you installed PB/WORKSHOP(tm)
TEST DRIVE (C:\TEMPDIR, in the above discussion), including all its
contents.
YOU'RE READY TO GO
Once you've complete the installation, you should consult the documents
(filename extension "doc") which have been installed. In particular,
read at least the "Overview" and "Quick Start" sections of the file
"PB/WORKSHOP(tm) TEST DRIVE.DOC". That document will tell you how to
invoke the program, and will give you other information you need to
properly evaluate PB/WORKSHOP(tm) TEST DRIVE. We hope you enjoy the
program.
===== Warranty =========================================
LIMITED WARRANTY
THIS SOFTWARE AND MANUAL ARE PROVIDED FOR EVALUATION ONLY, ON AN "AS IS"
BASIS. DSE SOFTWARE PUBLISHING DISCLAIMS ALL WARRANTIES RELATING TO
THIS SOFTWARE, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. NEITHER DSE SOFTWARE PUBLISHING NOR ANYONE ELSE WHO HAS BEEN
INVOLVED IN THE CREATION, PRODUCTION, OR DELIVERY OF THIS SOFTWARE SHALL
BE LIABLE FOR ANY INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE SUCH SOFTWARE, EVEN IF DSE SOFTWARE
PUBLISHING HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
CLAIMS. THE PERSON USING THE SOFTWARE BEARS ALL RISK AS TO THE QUALITY
AND PERFORMANCE OF THE SOFTWARE.
This agreement shall be governed by the laws of the State of CA and
shall inure to the benefit of DSE SOFTWARE PUBLISHING and any
successors, administrators, heirs and assigns. Any action or proceeding
brought by either party against the other arising out of or related to
this agreement shall be brought only in a STATE or FEDERAL COURT of
competent jurisdiction located in Mendocino County, CA. The parties
hereby consent to in personam jurisdiction of said courts.
===== License for Use and Distribution =================
TRIAL USE LICENSE
PB/WORKSHOP(tm) TEST DRIVE is NOT a public domain program. It is
copyrighted by DSE SOFTWARE PUBLISHING. This software and accompanying
documentation are protected by United States copyright law and also by
international treaty provisions.
DSE SOFTWARE PUBLISHING grants you a limited license to use this
software solely for evaluation purposes.
You may not use, copy, rent, lease, sell, modify, decompile,
disassemble, otherwise reverse engineer, or transfer the licensed
program except as provided in this agreement. Any such unauthorized use
shall result in immediate and automatic termination of this license. All
rights not expressly granted here are reserved to DSE SOFTWARE
PUBLISHING.
LIMITED DISTRIBUTION LICENSE
The following may distribute PB/WORKSHOP(tm) TEST DRIVE, completely
unaltered, without further permission...; for other cases or to
distribute in modified form, you must consult the attached data record,
which is hereby incorporated by reference. Any distribution satisfying
all the distribution requirements expressed in that data record is
hereby authorized.
Permission to distribute the PB/WORKSHOP(tm) TEST DRIVE package is not
transferable, assignable, saleable, or franchisable. Each vendor
wishing to distribute the package must independently satisfy the terms
of this limited distribution license.
U.S. Government Information: Use, duplication, or disclosure by the
U.S. Government of the computer software and documentation in this
package shall be subject to the restricted rights applicable to
commercial computer software as set forth in subdivision (b)(3)(ii) of
the Rights in Technical Data and Computer Software clause at
252.227-7013 (DFARS 52.227-7013). The Contractor/manufacturer is DSE
SOFTWARE PUBLISHING, Post Office Box 96, Willits, CA 95490-0096.
DSE SOFTWARE PUBLISHING may revoke any permissions granted here, by
notifying you in writing. All rights not expressly granted here are
reserved to DSE SOFTWARE PUBLISHING.
The attached VENDINFO data record is hereby incorporated by reference.
Any distribution satisfying all the distribution requirements expressed
in that data record is hereby authorized. All licenses to distribute
package are solely between the DSE Software Publishing and distributor,
and do not involve VENDINFO or Rams' Island Software.
===== Compressed Data Record Follows ===================
PK