home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
GEMini Atari
/
GEMini_Atari_CD-ROM_Walnut_Creek_December_1993.iso
/
zip
/
graphics
/
utility
/
gview232.lzh
/
GVIEW232
/
README.TXT
(
.txt
)
< prev
next >
Wrap
Text File
|
1993-07-28
|
12KB
|
262 lines
Dieter Fiebelkorn
Grüner Weg 29a
45768 Marl
== GERMANY ==
!!!!! GEM-View version 2.32 is on this Disk !!!!!
This version runs with HighColor and TrueColor cards and has been tested
on the Falcon 030, Spektrum1TC, Crazy Dots, Matrix true-color card, Nova 16M
and the CyReL16M-1280 (Cybercube Canada).
Please note that problems can occur if you use Chameleon to load GEM-View!
SEE ALSO: 'GraphicMode' in CHANGES, if you experience problems with
HighColor or TrueColor.
-----------------------------------------------------------------------------
The authors make NO WARRANTY or representation, either express or implied,
with respect to this software, its quality, accuracy, merchantability, or
fitness for a particular purpose.
This software is based in part on the work of the Independent JPEG
Group, which is copyright (C) 1991, 1992, Thomas G. Lane. All Rights Reserved.
The authors accept NO LIABILITY for damages of any kind.
-----------------------------------------------------------------------------
Run 'INSTALL.APP' to install GEM-View 2.30 and type in your registration-
number, your name and your code/key. Take care to type your name precisely,
observing capital/non-capital letters, spaces and special characters.
The program will then be automatically registered in your name.
If 'INSTALL.APP' don't work right, please use 'INSTALLA.APP', which
search the data files on drive 'A:'.
During this process you may, if you wish, instal the programs in
a directory other than the source directory. To do this, click on the empty
box below the word "Pfad:" and choose the destination directory from the
resulting selection box.
The contents of the archives (GEMVIEW.PAX, TOOLS.PAX and PICTURES.PAX)
can be seen below together with details of the subdirectories which will
be created.
Some special notes:
o A once-and-for-all depacking and installation process, which is not
dependent on your computer type, is all that is required.
After installation you can use all the files normally.
o You can start the installation from Floppy Disk, RAM-Disk or Hard-Disk.
It is, however, essential that the archives ( the .PAX files ) are in
the same directory as 'INSTALL.APP'.
o Before an existing file is overwritten, you will be asked for confirmation
to proceed.
o Using 'INSTALL.APP' doesn't modify the archives so you can copy this
disk after installation and send it to a friend! ;-)
If you registered an earlier version of GEM-View, and do not know your
code/key, you can obtain it as follows:-
o Send an eMail to me, with the following 'Subject:'
Register GEM-View: "#001234", "Norman User"
replacing the number by your own registration-number -see below- and
"Norman User" by your own name which must be typed in precisely,
observing capital/non-capital letters, spaces and special characters.
( You can discover your registration number quite simply.....
Run your old GEMVIEW and load the old GEMVIEW.PRG. - as if it were
an image file. When it is listed as a plain hex-dump,look to the right
of the third line to find a number preceded by '#'. This is your own
registration-number! )
OR
o Send me a letter with two CRI (international reply coupons), which
you can get at your post-office, saying that you want to know
your code/key. In this case your full name will be enough but please
write clearly and legibly!
Use the registration-number '000000' in the installation process to get
an unregistered version of GEMVIEW 2.30.
This version can then be tested for the next 14 days!
The Archives:
=============
GEMVIEW.PAX
-----------
SnapShot.Acc: A tool to snap and save all or part of the screen
or windows
OdiePack.Tif: A test-picture in TIFF format
GemView\DeskIcon\: Icons to install as Desktop Icons (mono/color)
GemView\Dither\: Files with special dither matrices for the
"Ordered Dithering" which can be set in the
"Preset" dialog or by using <ALT>"LOAD".
GemView\Dokument\: Documents(!) The English documents have not yet been
written and the German documents, to be found
surprisingly in the folder 'German', need some
updating. Your attention is drawn to 'CHANGES' for
information on important innovations.
GemView\GemView.App: An unregistered version of the principal program.
GemView\GemView.Inf: A simple INF-file for GEM-View.
TOOLS.PAX
---------
Gem_Show\: Install GEM-View as a FILE viewer for Multi-Tasking
Gem_XAcc\: Material for sending and receiving XAcc-Messages
Gem_View\: Material for sending VIEW-Messages
Dither.11b\: A program to create dithermatrices for GEMVIEW from
Alexander Clauss
Stresemannstr. 44
64297 Darmstadt
== GERMANY ==
MultiDia.102\: MultiDialog puts nearly any GEM-dialogbox into a
GEM-Window. The result is that you can access the
menu-bar or other applications while a dialog is
running.
Helmut Neukirchen
Bönnersdyk 63
47803 Krefeld
== GERMANY ==
????? Problems with Selectric ?????
1StGuide\: Help-System edited by
Oliver Bentler
Am Stadion 8a
W-5810 Witten
== GERMANY ==
for '1STGUIDE' written by
Guido Vollbeding
Turmstraße 61
O-4020 Halle
== GERMANY ==
WinxV20\: WinX. Copyright by Martin Osieka
Martin Osieka
Erbacherstr. 2
W-6100 Darmstadt
== GERMANY ==
VdiFix.110\: VDI-Fix. Copyright by Karsten Isakovic
Karsten Isakovic
Wilmersdorfer Str.82
W-1000 Berlin 12
== GERMANY ==
Dieter Fiebelkorn
======= Genaral agreements for GEM-View outside of GERMANY =======
******************************************************************
* *
* Provided that all the files *
* *
* INSTALL.APP, LIESMICH.TXT, README.TXT *
* GEMVIEW.PAX, TOOLS.PAX and PICTURES.PAX *
* *
* are included without any change, 'GEM-View' may be freely *
* copied and given away. *
* GEM-View is a complex product,so it is published as shareware. *
* This means that this package may be freely copied, but that if *
* use is made of the shareware a fee must be paid. *
* Please send, as that fee, US$26. *
* *
* All Copyright and other rights in GEM-View up to and including *
* Version 2.3x are the property of the Author ( D. Fiebelkorn. ) * *
* Commercial use is NOT PERMITTED (this includes distribution *
* on a Public-Domain-Disk or as part of any package ). *
* *
* The inclusion of a free copy with Tool-packages ( e.g with *
* graphic-cards ) must be the subject of specific permission by *
* the author. *
* *
* The latest version can be obtained from the author,at the MAUS *
* mailboxes, GEnie or from some ftp-accounts. *
* *
******************************************************************
- [2.32]:
o Bug loading VIVID images fixed
o 8 color ordered dithering (3.5 times faster than Floyd-Steinberg)
o English documentation included. [350394 Bytes]
- [2.31]:
o Bug loading TrueColor TIFF's fixed
- [2.30]:
o loads monochrome GIF's with less memory usage than before.
o The buffer-size for loading files can be set in GEMVIEW.INF
with an Editor. The value entered means KILOBYTES!
So, " 32 FileBufferSize"
sets the buffer to 32 kByte (the standard is 8 kByte).
o Auto convert GEM-Metafiles to Rasterimages without display.
Destination-raster-format and actual resolution is used.
Not in HighColor or TrueColor!
o JPEG version 4.0 now included. Loading 2-times faster!
Test-picture: 800 x 600 (87645 bytes), Reference: 8MHz ST
JPEG 4.0: LOAD (2'17") + Dither (0'55") = Sum (3'12")
JPEG 3.0: LOAD (4'29") + Dither (1'08") = Sum (5'37")
o Character size of GEM-View window can be chosen
(Standard font, size: 8 points, 9 points, 10 points)
o New keys supported F1 to F6
F1: white background
F2: grey background
F3: black background
F4: 8 points standard font
F5: 9 points standard font
F6: 10 points standard font
F10: "Break ^B"
o loads VIVID Raytracer images
o loads and saves Enhanced Simplex (ESM) pictures
o loads TIFF-Images with LZW-Compression
o Wildcards can now be used in Load, Conversion and Identification.
They can be used for automatic conversion of a complete directory.
Use the wildcard(s) in the filename in your File Selector Box.
Summary:
'*.*' : All Files.
'*' : All Files without any Extention.
'*.IMG' : All Files with Extention '.IMG'.
'F*.GIF' : All 'GIF'-Files, beginning with 'F'. After the 'F'
any other characters (including 0) are covered.
'F?.IFF' : All 'IFF'-Files, beginning with 'F' but the use of '?'
after the'F' means that exactly one character must follow.
'G???*.*' : All Files, having 'G' followed by 3 or more characters.
o meaning/use of '-merge' changed
o Two new error-propagation dither-algorithms:
"Jarvis-Judice-Ninke" and "Stucki"
o The Picture-Menu "GEM-View" can be opened without holding the right
mouse button, if the window is in the background.
A click with the left mouse button to it is enough.
o completly new Short-Cuts (MTOS)
o merging true color images
o xAcc2 included
o sending pictures using xAcc
o loads (X)IMG much faster
o better IFF and TIFF
o clipping faster
o in >32k-colors GEM-View does not use the virtual colormap
o Bug fixed: saving GIF to full disk
o black on black problem solved in >32k-colors
o correct iconify in 32k- and 64k-colors
o Bug in '-save...' used with '-merge' fixed