home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
IRIX 6.2 Applications 1996 August
/
Silicon_Graphics_812-0542-002.iso
/
relnotes
/
SoftWindows2
/
ch4.z
/
ch4
Wrap
Text File
|
1996-08-03
|
2KB
|
65 lines
- 1 -
4. _S_u_p_p_o_r_t_i_n_g__M_u_l_t_i_p_l_e__V_e_r_s_i_o_n_s
To run SoftWindows 1.x and SoftWindows 2.0 on the same
machine, perform the following steps:
Install SoftWindows 2.0
If you have a permanent 1.x license installed, SoftWindows
2.0 will upgrade it. A copy of the old license is stored in
/_u_s_r/_l_i_b/_S_o_f_t_W_i_n_d_o_w_s_2/_F_L_E_X_l_m/_1_2_5_l_i_c_e_n_s_e._d_a_t.
Run inst or Software Manager. If you run Software Manager,
make sure the Command item in the Panes menu is checked.
In inst or the Command line of Software Manager, type "set
rulesoverride true".
Then proceed with the installation of SoftWindows 1.x.
If you had a permanent license, copy the license from:
/_u_s_r/_l_i_b/_S_o_f_t_W_i_n_d_o_w_s_2/_F_L_E_X_l_m/_1_2_5_l_i_c_e_n_s_e._d_a_t
to:
/_u_s_r/_l_i_b/_S_o_f_t_W_i_n_d_o_w_s/_F_L_E_X_l_m/_l_i_c_e_n_s_e._d_a_t
If you install SoftWindows 1.x after installing SoftWindows
2.0, you will notice that items in the help menu in
SoftWindows 2.0 no longer work correctly. This is because
the helpmap file was overwritten by the SoftWindows 1.x
helpmap file. You can only have one version's helpmap file
active at a time. If you prefer to switch back to
SoftWindows 2.0 help, copy:
/_u_s_r/_l_i_b/_S_o_f_t_W_i_n_d_o_w_s_2/_s_O_f_t_W_i_n_d_o_w_s._h_e_l_p_m_a_p
to:
/_u_s_r/_s_h_a_r_e/_h_e_l_p/_s_O_f_t_W_i_n_d_o_w_s._h_e_l_p_m_a_p