! Set this to False to turn off the Quick Help prompts in the more Options panel
LexmarkOptra*DisplayHelpString: True
! Action area buttons
*okButton.labelString: OK
*applyButton.labelString: Apply
*cancelButton.labelString: Cancel
*closeButtoklabelString: Close
! General options
*generalOptions.labelString: General Options
*paperSize.labelString: Paper Size:
*bannerPage.labelString: Print Banner Page:
*bannerYes.labelString: Yes
*bannerNo.labelString: No
*verbose.labelString: Verbose Logging:
*verboseOn.labelString: On
*verboseOff.labelString: Off
*darkness.labelString: Print Darkness:
*Normal.labelString: Normal
*Light.labelString: Light
*Dark.labelString: Dark
*Toner.labelString: Toner Saver
*Draft.labelString: Draft
*printerRes.labelString: Printer Resolution:
*paperType.labelString: Paper Type:
*paperTypeNormal.labelString: Plain
*paperTypeRough.labelString: Card Stock
*paperTypeTrans.labelString: Transparency
*duplex.labelString: Duplex Option:
*off.labelString: Off
*bindLongSide.labelString: On (Bind Long Edge)
*bindShortSide.labelString: On (Bind Short Edge)
*tray.labelString: Media Tray:
*lower.labelString: Upper (1)
*upper.labelString: Lower (2)
*manual.labelString: Manual
*feeder.labelString: Optional Feeder
! PostScript options
*psOptions.labelString: PostScript File Options
*psOrder.labelString: Page Ordering:
*psOrderNormal.labelString: Normal
*psOrderRev.labelString: Reversed
*psRange.labelString: Page Range:
*psRangeAll.labelString: All
*psRangeFrom.labelString: From:
*psRangeTo.labelString: To:
*psType.labelString:
*psTypeEven.labelString: Even Pages Only
*psTypeOdd.labelString: Odd Pages Only
! Image options
*imageOptions.labelString: Image File Options
*color.labelString: Color model:
*colorGray.labelString: Gray Scale
*colorRGB.labelString: Three Color (RGB)
*colorCMYK.labelString: Four Color (CMYK)
*flip.labelString: Mirror Image:
*flipYes.labelString: Yes
*flipNo.labelString: No
*rotate.labelString: Rotate:
*rotateBest.labelString: Best Fit
*rotateAngle.labelString: Angle:
*rotUnits.labelString: degrees
*gamma.labelString: Darkness:
*scaling1.labelString: Scaling:
*scaling2.labelString:
*scaling3.labelString:
*scaleNone.labelString: None
*scaleRes.labelString: Match Input Resolution:
*scaleFill.labelString: Page Fill:
! Text options
*textOptions.labelString: Text File Options
*fonts.labelString: Font:
*fontSize.labelString: Size:
*gaudy.labelString: Page Headers:
*gaudyYes.labelString: Yes
*gaudyNo.labelString: No
*orientation.labelString: Orientation:
*orientPortrait.labelString: Portrait
*orientLandscape.labelString: Landscape
*columns.labelString: Columns Per Page:
*helpPane.helpString: For help on any item place the cursor on that item. To disable this menu see the file /usr/lib/X11/app-defaults/LexmarkOptra
*tray.helpString: If you have multiple trays you can select which tray to use as the media source. Use manual for selecting the manual feed tray.
*paperSize.helpString: Specify the paper size you wish to use with this menu.
*paperType..helpString: Specify the paper type with this menu. Paper type is used by the printer to control internal settings to reduce paper jams for the selected paper type.
*printerRes.helpString: Set the printer resolution using this menu. Higher numbers are better quality. Lower numbers are fast and are suitable for rough drafts. 1200 DPI is much slower then 600 DPI.
*darkness.helpString: You can change the darkness of the image using this menu. A Dark setting sometimes improves 1200 DPI images. Use Toner Saver to extend the life of the toner cartridge. Draft is for draft mode.
*duplex.helpString: If you have the duplex option use this menu to select it. Bind on long edge to if you will read the document like a book (left to right). Bind on short edge if you will read it like a flip chart.
*psRange.helpString: You may select a range of pages to print using this menu.
# This section is common to all Impressario GUI panels:
*actionForm.helpString: Select OK to apply settings and exit this menu. Select Apply to apply settings and leave this menu displayed. Cancel exits this menu with no changes.
*generalOptions.helpString: These are general options that control printer settings, message logging and banner pages.
*bannerPage.helpString: Turn a banner page on or off.
*verbose.helpString: Turns on verbose (debug) logging. Messages are logged to the /var/spool/lp/log file.
*psOptions.helpString: These options apply to files if they are already in PostScript format.
*psOrder.helpString: You can print first page last using Reversed.
*psType.helpString: You can print all Even pages then turn the paper over and put it back in the printer and print Odd pages to get double-sided printing.
*imageOptions.helpString: These options apply to image files that contain bit-mapped graphics (i.e. Tiff, Gif, etc.).
*flip.helpString: You might mirror (flip) an image when printing a transparency so you can write on the side that does not have ink and still project the image correctly.
*rotate.helpString: Best fit will rotate 90 degrees if that provides a larger image. Angles is -360 to 360 degrees (-90 is same as 270, etc.).
*gamma.helpString: Increase to darken the image. Decrease to make it lighter. 1.0 is the default.
*scaling1.helpString: None generates as large an image as possible for the specified paper size.
*scaling2.helpString: Match relates image size to printer output. If you scan an image at 100 DPI and set Match to 100 DPI the printed image size will match the size of the scanned image.
*scaling3.helpString: Allows you to specify the image size as a percent of the page size.
*textOptions.helpString: These options apply to text files.
*processAs.helpString: To turn on the format options seen below select Yes. To ignore them, select No.
*fonts.helpString: You can select from these fonts and font sizes for text printing. Font size units are in points (72 points per inch).
*gaudy.helpString: Adds a header to each page. Header includes a page number, date and time and file name.
*orientation.helpString: Portrait is long edge of paper in vertical orientation (portraits often painted this way). Landscape is long edge in horizontal orientation (landscapes often painted this way).
*columns.helpString: Set the number of columns to print. If font size is too large may 'clip' text if 2 columns are used.
