home *** CD-ROM | disk | FTP | other *** search
/ Internet Info 1997 December / Internet_Info_CD-ROM_Walnut_Creek_December_1997.iso / rfc / rfc1382 < prev    next >
Text File  |  1992-11-12  |  154KB  |  3,868 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7. Network Working Group                                  D. Throop, Editor
  8. Request for Comments: 1382                      Data General Corporation
  9.                                                            November 1992
  10.  
  11.  
  12.               SNMP MIB Extension for the X.25 Packet Layer
  13.  
  14. Status of this Memo
  15.  
  16.    This RFC specifies an IAB standards track protocol for the Internet
  17.    community, and requests discussion and suggestions for improvements.
  18.    Please refer to the current edition of the "IAB Official Protocol
  19.    Standards" for the standardization state and status of this protocol.
  20.    Distribution of this memo is unlimited.
  21.  
  22. Abstract
  23.  
  24.    This memo defines a portion of the Management Information Base (MIB)
  25.    for use with network management protocols in TCP/IP-based internets.
  26.    In particular, it defines objects for managing the Packet Layer of
  27.    X.25.  The objects defined here, along with the objects in the "SNMP
  28.    MIB Extension for LAPB" [9] and the "Definitions of Managed Objects
  29.    for RS-232-like Hardware Devices" [8], combine to allow management of
  30.    an X.25 protocol stack.
  31.  
  32. Table of Contents
  33.  
  34.    1. The Network Management Framework .......................    2
  35.    2. Objects ................................................    2
  36.    2.1 Format of Definitions .................................    3
  37.    3. Overview ...............................................    3
  38.    3.1 Informal Overview .....................................    3
  39.    3.2 Textual Conventions ...................................    4
  40.    3.3 Structure of MIB ......................................    4
  41.    3.4 Tables ................................................    5
  42.    3.5 Table Usage ...........................................    6
  43.    3.6 Conformance ...........................................    6
  44.    4. Object Definitions .....................................    7
  45.    5. Appendix: Revision History .............................   62
  46.       July 30 1992 ...........................................   62
  47.       June 26 1992 ...........................................   62
  48.       June 1992 ..............................................   63
  49.       April 1992 .............................................   63
  50.       February 1992 ..........................................   65
  51.       October 1991 ...........................................   65
  52.       June 1991 ..............................................   66
  53.       April 1991 .............................................   66
  54.    6. Acknowledgements .......................................   66
  55.  
  56.  
  57.  
  58. Throop                                                          [Page 1]
  59.  
  60. RFC 1382                 X.25 Packet Layer MIB             November 1992
  61.  
  62.  
  63.    7. References .............................................   67
  64.    8. Security Considerations ................................   68
  65.    9. Author's Address .......................................   69
  66.  
  67. 1.  The Network Management Framework
  68.  
  69.    The Internet-standard Network Management Framework consists of three
  70.    components.  These components give the rules for defining objects,
  71.    the definitions of objects, and the protocol for manipulating
  72.    objects.
  73.  
  74.    The network management framework structures objects in an abstract
  75.    information tree. The branches of the tree name objects and the
  76.    leaves of the tree contain the values manipulated to effect
  77.    management. This tree is called the Management Information Base or
  78.    MIB. The concepts of this tree are given in STD 16/RFC 1155, "The
  79.    Structure of Management Information" or SMI [1]. The SMI defines the
  80.    trunk of the tree and the types of objects used when defining the
  81.    leaves. STD 16/RFC 1212, "Towards Concise MIB Definitions" [4],
  82.    defines a more concise description mechanism that preserves all the
  83.    principals of the SMI.
  84.  
  85.    The core MIB definitions for the Internet suite of protocols can be
  86.    found in RFC 1156 [2] "Management Information Base for Network
  87.    Management of TCP/IP-based internets". STD 17/RFC 1213 [5] defines
  88.    MIB-II, an evolution of MIB-I with changes to incorporate
  89.    implementation experience and new operational requirements.
  90.  
  91.    STD 15/RFC 1157 [3] defines the SNMP protocol itself. The protocol
  92.    defines how to manipulate the objects in a remote MIB.
  93.  
  94.    The tree structure of the MIB allows new objects to be defined for
  95.    the purpose of experimentation and evaluation.
  96.  
  97. 2.  Objects
  98.  
  99.    The definition of an object in the MIB requires an object name and
  100.    type.  Object names and types are defined using the subset of
  101.    Abstract Syntax Notation One (ASN.1) [6] defined in the SMI [1].
  102.    Objects are named using ASN.1 object identifiers, administratively
  103.    assigned names, to specify object types.  The object name, together
  104.    with an optional object instance, uniquely identifies a specific
  105.    instance of an object.  For human convenience, we often use a textual
  106.    string, termed the OBJECT DESCRIPTOR, to also refer to objects.
  107.  
  108.    Objects also have a syntax that defines the abstract data structure
  109.    corresponding to that object type.  The ASN.1 language [6] provides
  110.    the primitives used for this purpose.  The SMI [1] purposely
  111.  
  112.  
  113.  
  114. Throop                                                          [Page 2]
  115.  
  116. RFC 1382                 X.25 Packet Layer MIB             November 1992
  117.  
  118.  
  119.    restricts the ASN.1 constructs which may be used for simplicity and
  120.    ease of implementation.  The encoding of an object type simply
  121.    describes how to represent an object using ASN.1 encoding rules [7],
  122.    for purposes of dealing with the SNMP protocol.
  123.  
  124. 2.1.  Format of Definitions
  125.  
  126.    Section 4 contains the specification of all object types defined in
  127.    this MIB module.  The object types are defined using the conventions
  128.    defined in the SMI, as amended by the extensions specified in
  129.    "Towards Concise MIB Definitions" [4].
  130.  
  131. 3.  Overview
  132.  
  133. 3.1.  Informal Overview
  134.  
  135.    This section describes how the objects defined below relate with
  136.    other MIBs.  This section is only informational to help understand
  137.    how the pieces fit together.
  138.  
  139.    The objects defined below are used in conjunction with MIB-II and
  140.    other MIBs such as the LAPB MIB [9].  A system with a complete X.25
  141.    stack running over a synchronous line will have at least two
  142.    interfaces in the ifTable defined in MIB-II.  There will be an
  143.    interface for LAPB and another interface for the packet layer of
  144.    X.25. There will also be objects defined in the RS-232-like MIB for
  145.    the physical sync line.
  146.  
  147.    Each software interface identifies the layer below it used to send
  148.    and receive packets. The X.25 MIB object, defined below,
  149.    x25OperDataLinkId, specifies an instance of lapbAdmnIndex for the
  150.    LAPB interface under that X.25. The LAPB object, lapbOperPortId,
  151.    identifies an instance of the rs232PortIndex for the the Sync line
  152.    used by LAPB.
  153.  
  154.    For X.25 running over LAPB over Ethernet, the lapbOperPortId would
  155.    identify the instance of ifIndex for the Ethernet interface.
  156.  
  157.    Each X.25 subnetwork will have separate entries in the ifTable.  Thus
  158.    a system with two X.25 lines would have two ifTable entries for the
  159.    two X.25 packet layers and two other entries for the two LAPB
  160.    interfaces. Each X.25 Packet Layer MIB would identify the instance of
  161.    the LAPB MIB for the interface below it. Each LAPB MIB would identify
  162.    the Sync line below it. The system would also have two entries in the
  163.    rs232PortTable and rs232SyncPortTable for the two physical lines.
  164.  
  165.    Since the ifTable as defined in MIB-II is device independent, it
  166.    doesn't have anything specific for any type of interface.  The
  167.  
  168.  
  169.  
  170. Throop                                                          [Page 3]
  171.  
  172. RFC 1382                 X.25 Packet Layer MIB             November 1992
  173.  
  174.  
  175.    objects below define the X.25 packet layer specific information for
  176.    an interface of type X.25. Different X.25 interfaces can also be
  177.    differentiated by matching the values of ifIndex with x25AdmnIndex.
  178.  
  179. 3.2.  Textual Conventions
  180.  
  181.    This MIB introduces a new data type as a textual convention for use
  182.    with X.25.  This textual convention enhances the readability of the
  183.    specification and can ease comparison with other specifications if
  184.    appropriate.  It should be noted that the introduction of such
  185.    textual conventions has no effect on either the syntax nor the
  186.    semantics of any managed objects.  These conventions are merely an
  187.    artifact of the explanatory method used.  Objects defined in terms of
  188.    one of these methods are always encoded by means of the rules that
  189.    define the primitive type.  Hence, no changes to the SMI or the SNMP
  190.    are necessary to accommodate these textual conventions which are
  191.    adopted merely for the convenience of readers and writers in pursuit
  192.    of the elusive goal of clear, concise, and unambiguous MIB documents.
  193.  
  194.    This MIB introduces the data type of:
  195.  
  196.                        X121Address
  197.  
  198. 3.3.  Structure of MIB
  199.  
  200.    Instances of the objects defined below represent attributes of an
  201.    X.25 Packet Layer interface.  At present these interfaces are
  202.    identified by an ifType object in the Internet-standard MIB-II [5]
  203.    of:
  204.  
  205.                  ddn-x25(4), and
  206.                  rfc887-x25(5).
  207.  
  208.    For these interfaces, the value of the ifSpecific variable in the
  209.    MIB-II [5] has the OBJECT IDENTIFIER value:
  210.  
  211.                  x25    OBJECT IDENTIFIER ::= { transmission 5 }
  212.  
  213.    The objects defined below are similar to those defined in a draft ISO
  214.    document for X.25 management [11]. Some object definitions also
  215.    reference the ISO specification for X.25 [10] to specify  the section
  216.    that will give the reader additional information about the object.
  217.    Access to those documents maybe useful (but isn't essential) to
  218.    understand the names and semantics of some objects.  The similarity
  219.    of these objects with the ISO objects minimizes the instrumentation
  220.    required by those systems that support both OSI and TCP/IP management
  221.    protocols.
  222.  
  223.  
  224.  
  225.  
  226. Throop                                                          [Page 4]
  227.  
  228. RFC 1382                 X.25 Packet Layer MIB             November 1992
  229.  
  230.  
  231.    Since the objects defined here are extensions to the Internet
  232.    Standard MIB [2] and thus also an extension of the second version,
  233.    MIB-II [5], the objects defined here explicitly do not duplicate
  234.    objects defined in existing standards.  In some instances
  235.    clarification of how to apply those objects has been given.
  236.  
  237.    The relationship between an X.25 Packet Layer interface and an
  238.    interface in the context of the Internet-standard MIB [5] is one-to-
  239.    one. As such, the value of an ifIndex object instance can be directly
  240.    used to identify corresponding instances of the objects defined
  241.    below.
  242.  
  243. 3.4.  Tables
  244.  
  245.    The objects below form several tables.  These tables are:
  246.  
  247.                                x25AdmnTable
  248.                                x25OperTable
  249.                                x25StatTable
  250.                                x25ChannelTable
  251.                                x25CircuitTable
  252.                                x25ClearedCircuitTable
  253.                                x25CallParmTable
  254.  
  255.    The x25AdmnTable defines objects for the parameters of an X.25
  256.    interface which the administrator can read and set.  These objects
  257.    are used at interface initialization time to start the interface.
  258.    Once the interface has started, changes to the objects in the
  259.    Administration table may not take affect until the interface is re-
  260.    initialized.
  261.  
  262.    The x25OperTable defines objects that report the current parameters
  263.    used by a running interface.  These objects are read-only.
  264.  
  265.    The x25StatTable defines objects that report operational statistics
  266.    for an X.25 interface.  These are read-only counters of events that
  267.    occurred at the interface.
  268.  
  269.    The x25ChannelTable defines objects to allow the administrator to
  270.    manage the division of channel numbers.
  271.  
  272.    The x25CircuitTable defines objects that return information about
  273.    existing X.25 circuits.  These entries result from calls placed or
  274.    answered by the PLE or from PVCs.
  275.  
  276.    The x25ClearedCircuitTable contains objects for recording the
  277.    termination information from circuits that cleared abnormally.
  278.  
  279.  
  280.  
  281.  
  282. Throop                                                          [Page 5]
  283.  
  284. RFC 1382                 X.25 Packet Layer MIB             November 1992
  285.  
  286.  
  287.    The x25CallParmTable defines the call parameters used to call other
  288.    systems.  This table contains call parameter entries which are
  289.    referenced by other tables.  For example, the x25AdmnTable has one
  290.    object that identifies the entry in the table for the default PLE
  291.    parameters.  The x25CircuitTable has one object that identifies the
  292.    entry in the x25CallParmTable for the parameters in use by that
  293.    circuit.  Other MIBs may also reference entries to identify call
  294.    parameters to use to make X.25 calls.
  295.  
  296. 3.5.  Table Usage
  297.  
  298.    Different tables provide different functions.  The administrator sets
  299.    the starting X.25 parameters in the x25AdmnTable for the X.25 PLE;
  300.    these objects include a reference to the x25CallParmTable entry to
  301.    identify the default call parameters for the PLE.  Once all the
  302.    parameters are set, the administrator initializes the interface.  As
  303.    part of initializing the interface, the operating parameters are
  304.    copied into the interface from the x25AdmnTable; these parameters are
  305.    viewable by getting the objects in the x25OperTable.  (The interface
  306.    maybe started by setting the value of ifAdminStatus to up.)  If any
  307.    PVCs are configured, their parameters can be set in the the
  308.    x25CircuitTable before initializing the interface; this should be
  309.    done in conjunction with configuring higher layer entities to use the
  310.    PVCs via the MIBs for those entities.
  311.  
  312.    Once the PLE completes initialization, it makes additional entries in
  313.    the x25circuitTable for calls placed or answered.  When a circuit is
  314.    cleared, the status of the entry for the circuit is set to closed
  315.    and, if the clear is abnormal, an entry will also be made in the
  316.    x25ClearedCircuitTable.  An entry in the x25CircuitTable with a
  317.    status of closed maybe deleted by the agent at its convenience.  A
  318.    closed entry will always be reused at the time the PLE re-allocates
  319.    the channel number of the entry for another call.  The call
  320.    parameters used for a circuit can be found by looking in the
  321.    x25CircuitTable and following the x25CircuitCallParamId pointer to
  322.    the entry in the x25CallParmTable that contains the parameters.
  323.  
  324.    There are no mechanisms in the X.25 MIB for telling the PLE to place
  325.    an X.25 call. Such mechanisms belong in the MIBs for the higher layer
  326.    entities that use the X.25 circuits.
  327.  
  328. 3.6.  Conformance
  329.  
  330.    All the objects defined here are mandatory. To claim conformance with
  331.    this MIB an implementation must support all objects.  However some
  332.    objects pertain to features that are optional.  There are values
  333.    defined for those objects that indicate the implementation does not
  334.    support the optional feature.  The agent for such an implementation
  335.  
  336.  
  337.  
  338. Throop                                                          [Page 6]
  339.  
  340. RFC 1382                 X.25 Packet Layer MIB             November 1992
  341.  
  342.  
  343.    must support reading the object and return the value that indicates
  344.    the optional feature isn't supported and reject set requests to
  345.    change the object.
  346.  
  347.    Some optional features have more than one object that pertain to it
  348.    (window rotation has a timer, a count, and a counter for timer
  349.    runouts).  In such case, any object which indicates the optional
  350.    feature isn't supported is sufficient to indicate the feature isn't
  351.    supported and the values of the other objects relative to that
  352.    feature are undefined.
  353.  
  354. 4.  Object Definitions
  355.  
  356.  
  357.           RFC1382-MIB DEFINITIONS ::= BEGIN
  358.  
  359.           IMPORTS
  360.                   Counter, Gauge, TimeTicks
  361.                           FROM RFC1155-SMI
  362.                   OBJECT-TYPE
  363.                           FROM RFC-1212
  364.                   DisplayString, transmission
  365.                           FROM RFC1213-MIB
  366.                   TRAP-TYPE
  367.                           FROM RFC-1215
  368.                   EntryStatus
  369.                           FROM RFC1271-MIB
  370.                   PositiveInteger,
  371.                   IfIndexType
  372.                           FROM RFC1381-MIB;
  373.  
  374.           x25     OBJECT IDENTIFIER ::= { transmission 5 }
  375.  
  376.  
  377.           -- Support of the X25 subtree and all subtrees under it
  378.           -- is mandatory for all agents of system that implement X.25.
  379.  
  380.           X121Address ::= OCTET STRING (SIZE(0..17))
  381.            -- 0 to 17 bytes in length containing the ASCII
  382.            -- characters [0-9], each octet contains one digit
  383.            -- of the address.
  384.  
  385.  
  386.           -- ###########################################################
  387.           --            X.25 Administration Table
  388.           -- ###########################################################
  389.  
  390.           x25AdmnTable OBJECT-TYPE
  391.  
  392.  
  393.  
  394. Throop                                                          [Page 7]
  395.  
  396. RFC 1382                 X.25 Packet Layer MIB             November 1992
  397.  
  398.  
  399.                   SYNTAX  SEQUENCE OF X25AdmnEntry
  400.                   ACCESS  not-accessible
  401.                   STATUS  mandatory
  402.                   DESCRIPTION
  403.                           "This table contains the administratively
  404.                           set configuration parameters for an X.25
  405.                           Packet Level Entity (PLE).
  406.  
  407.                          Most of the objects in this table have
  408.                           corresponding objects in the x25OperTable.
  409.                           This table contains the values as last set
  410.                           by the administrator.  The x25OperTable
  411.                           contains the values actually in use by an
  412.                           X.25 PLE.
  413.  
  414.                           Changing an administrative value may or may
  415.                           not change a current operating value.  The
  416.                           operating value may not change until the
  417.                           interface is restarted.  Some
  418.                           implementations may change the values
  419.                           immediately upon changing the administrative
  420.                           table.  All implementations are required to
  421.                           load the values from the administrative
  422.                           table when initializing a PLE."
  423.                   ::= { x25 1 }
  424.  
  425.           x25AdmnEntry OBJECT-TYPE
  426.                   SYNTAX  X25AdmnEntry
  427.                   ACCESS  not-accessible
  428.                   STATUS  mandatory
  429.                   DESCRIPTION
  430.                           "Entries of x25AdmnTable."
  431.                   INDEX { x25AdmnIndex }
  432.                   ::= { x25AdmnTable 1 }
  433.  
  434.           X25AdmnEntry ::= SEQUENCE {
  435.                   x25AdmnIndex
  436.                           IfIndexType,
  437.                   x25AdmnInterfaceMode
  438.                           INTEGER,
  439.                   x25AdmnMaxActiveCircuits
  440.                           INTEGER,
  441.                   x25AdmnPacketSequencing
  442.                           INTEGER,
  443.                   x25AdmnRestartTimer
  444.                           PositiveInteger,
  445.                x25AdmnCallTimer
  446.                           PositiveInteger,
  447.  
  448.  
  449.  
  450. Throop                                                          [Page 8]
  451.  
  452. RFC 1382                 X.25 Packet Layer MIB             November 1992
  453.  
  454.  
  455.                   x25AdmnResetTimer
  456.                           PositiveInteger,
  457.                   x25AdmnClearTimer
  458.                           PositiveInteger,
  459.                   x25AdmnWindowTimer
  460.                           PositiveInteger,
  461.                   x25AdmnDataRxmtTimer
  462.                           PositiveInteger,
  463.                   x25AdmnInterruptTimer
  464.                           PositiveInteger,
  465.                   x25AdmnRejectTimer
  466.                           PositiveInteger,
  467.                   x25AdmnRegistrationRequestTimer
  468.                           PositiveInteger,
  469.                   x25AdmnMinimumRecallTimer
  470.                           PositiveInteger,
  471.                   x25AdmnRestartCount
  472.                           INTEGER,
  473.                   x25AdmnResetCount
  474.                           INTEGER,
  475.                   x25AdmnClearCount
  476.                           INTEGER,
  477.                   x25AdmnDataRxmtCount
  478.                           INTEGER,
  479.                   x25AdmnRejectCount
  480.                           INTEGER,
  481.                   x25AdmnRegistrationRequestCount
  482.                           INTEGER,
  483.                   x25AdmnNumberPVCs
  484.                           INTEGER,
  485.                   x25AdmnDefCallParamId
  486.                           OBJECT IDENTIFIER,
  487.                   x25AdmnLocalAddress
  488.                           X121Address,
  489.                   x25AdmnProtocolVersionSupported
  490.                           OBJECT IDENTIFIER
  491.                   }
  492.  
  493.           x25AdmnIndex OBJECT-TYPE
  494.                   SYNTAX  IfIndexType
  495.                   ACCESS  read-only
  496.                   STATUS  mandatory
  497.                   DESCRIPTION
  498.                   "The ifIndex value for the X.25 Interface."
  499.                   ::= { x25AdmnEntry 1 }
  500.  
  501.           x25AdmnInterfaceMode OBJECT-TYPE
  502.                   SYNTAX  INTEGER {
  503.  
  504.  
  505.  
  506. Throop                                                          [Page 9]
  507.  
  508. RFC 1382                 X.25 Packet Layer MIB             November 1992
  509.  
  510.  
  511.                                   dte (1),
  512.                                   dce (2),
  513.                                   dxe (3)
  514.                           }
  515.                   ACCESS  read-write
  516.                   STATUS  mandatory
  517.                   DESCRIPTION
  518.                           "Identifies DCE/DTE mode in which the
  519.                           interface operates.  A value of dxe
  520.                           indicates the mode will be determined by XID
  521.                           negotiation."
  522.                   REFERENCE "10733 5.9 interfaceMode"
  523.                   ::= { x25AdmnEntry 2 }
  524.  
  525.           x25AdmnMaxActiveCircuits        OBJECT-TYPE
  526.                   SYNTAX  INTEGER (0..4096)
  527.                   ACCESS  read-write
  528.                   STATUS  mandatory
  529.                   DESCRIPTION
  530.                           "The maximum number of circuits this PLE can
  531.                           support; including PVCs."
  532.                   REFERENCE "10733 5.9 maxActiveCircuits;
  533.                           See ISO 8208, Section 3.7"
  534.                   ::= { x25AdmnEntry 3 }
  535.  
  536.           x25AdmnPacketSequencing OBJECT-TYPE
  537.                   SYNTAX  INTEGER {
  538.                                   modulo8 (1),
  539.                                   modulo128 (2)
  540.                           }
  541.                   ACCESS  read-write
  542.                   STATUS  mandatory
  543.                   DESCRIPTION
  544.                           "The modulus of the packet sequence number
  545.                           space."
  546.                   REFERENCE "10733 extendedPacketSequencing;
  547.                           See ISO 8208 Section 7.1.1"
  548.                   ::= { x25AdmnEntry 4 }
  549.  
  550.           x25AdmnRestartTimer OBJECT-TYPE
  551.                SYNTAX     PositiveInteger
  552.                   ACCESS  read-write
  553.                   STATUS  mandatory
  554.                   DESCRIPTION
  555.                           "The T20 restart timer in milliseconds."
  556.                   REFERENCE "10733 5.9 restartTime
  557.                           See ISO 8208 Section 4.1, table 26"
  558.                   ::= { x25AdmnEntry 5 }
  559.  
  560.  
  561.  
  562. Throop                                                         [Page 10]
  563.  
  564. RFC 1382                 X.25 Packet Layer MIB             November 1992
  565.  
  566.  
  567.           x25AdmnCallTimer OBJECT-TYPE
  568.                   SYNTAX  PositiveInteger
  569.                   ACCESS  read-write
  570.                   STATUS  mandatory
  571.                   DESCRIPTION
  572.                           "The T21 Call timer in milliseconds."
  573.                   REFERENCE "10733 callTime;
  574.                           See ISO 8208 Section 5.2.1, table 26"
  575.                   ::= { x25AdmnEntry 6 }
  576.  
  577.           x25AdmnResetTimer OBJECT-TYPE
  578.                   SYNTAX  PositiveInteger
  579.                   ACCESS  read-write
  580.                   STATUS  mandatory
  581.                   DESCRIPTION
  582.                           "The T22 Reset timer in milliseconds."
  583.                   REFERENCE "10733 resetTime;
  584.                           See ISO 8208 Section 8.1, table 26"
  585.                   ::= { x25AdmnEntry 7 }
  586.  
  587.           x25AdmnClearTimer OBJECT-TYPE
  588.                   SYNTAX  PositiveInteger
  589.                   ACCESS  read-write
  590.                   STATUS  mandatory
  591.                   DESCRIPTION
  592.                           "The T23 Clear timer in milliseconds."
  593.                   REFERENCE "10733 clearTime;
  594.                           See ISO 8208 Section 5.5.1, table 26"
  595.                   ::= { x25AdmnEntry 8 }
  596.  
  597.           x25AdmnWindowTimer OBJECT-TYPE
  598.                   SYNTAX  PositiveInteger
  599.                   ACCESS  read-write
  600.                   STATUS  mandatory
  601.                   DESCRIPTION
  602.                           "The T24 window status transmission timer in
  603.                           milliseconds.  A value of 2147483647
  604.                           indicates no window timer in use."
  605.                   REFERENCE "10733 5.10.1 windowTime (opt);
  606.                           See ISO 8208 Section 11.2.2, table 26"
  607.                   ::= { x25AdmnEntry 9 }
  608.  
  609.           x25AdmnDataRxmtTimer OBJECT-TYPE
  610.                   SYNTAX  PositiveInteger
  611.                   ACCESS  read-write
  612.                   STATUS  mandatory
  613.                   DESCRIPTION
  614.                           "The T25 data retransmission timer in
  615.  
  616.  
  617.  
  618. Throop                                                         [Page 11]
  619.  
  620. RFC 1382                 X.25 Packet Layer MIB             November 1992
  621.  
  622.  
  623.                           milliseconds.  A value of 2147483647
  624.                           indicates no data retransmission timer in
  625.                           use."
  626.                   REFERENCE "10733 5.10.1 dataRetransmissionTime (opt);
  627.                           See ISO 8208 Section 11.2.1, table 26"
  628.                   ::= { x25AdmnEntry 10 }
  629.  
  630.           x25AdmnInterruptTimer OBJECT-TYPE
  631.                   SYNTAX  PositiveInteger
  632.                   ACCESS  read-write
  633.                   STATUS  mandatory
  634.                   DESCRIPTION
  635.                           "The T26 interrupt timer in milliseconds.  A
  636.                           value of 2147483647 indicates no interrupt
  637.                           timer in use."
  638.                   REFERENCE "10733 interruptTime;
  639.                           See ISO 8208 Section 6.8.1, table 26"
  640.                   ::= { x25AdmnEntry 11 }
  641.  
  642.           x25AdmnRejectTimer OBJECT-TYPE
  643.                   SYNTAX  PositiveInteger
  644.                   ACCESS  read-write
  645.                   STATUS  mandatory
  646.                   DESCRIPTION
  647.                           "The T27 Reject retransmission timer in
  648.                           milliseconds.  A value of 2147483647
  649.                           indicates no reject timer in use."
  650.                   REFERENCE "10733 5.10.1 dataRejectTime (opt);
  651.                           See ISO 8208 Section 13.4.1, table 26"
  652.                   ::= { x25AdmnEntry 12 }
  653.  
  654.           x25AdmnRegistrationRequestTimer OBJECT-TYPE
  655.                   SYNTAX  PositiveInteger
  656.                   ACCESS  read-write
  657.                   STATUS  mandatory
  658.                   DESCRIPTION
  659.                           "The T28 registration timer in milliseconds.
  660.                           A value of 2147483647 indicates no
  661.                           registration timer in use."
  662.                   REFERENCE "10733 5.8.1 registrationRequestTime (opt)
  663.                           See ISO 8208    Section 13.1.1.1, table 26"
  664.                   ::= { x25AdmnEntry 13 }
  665.  
  666.           x25AdmnMinimumRecallTimer OBJECT-TYPE
  667.                   SYNTAX  PositiveInteger
  668.                   ACCESS  read-write
  669.                   STATUS  mandatory
  670.                   DESCRIPTION
  671.  
  672.  
  673.  
  674. Throop                                                         [Page 12]
  675.  
  676. RFC 1382                 X.25 Packet Layer MIB             November 1992
  677.  
  678.  
  679.                           "Minimum time interval between unsuccessful
  680.                           call attempts in milliseconds."
  681.                   REFERENCE "10733 5.9 minimum RecallTimer"
  682.                   ::= { x25AdmnEntry 14 }
  683.  
  684.           x25AdmnRestartCount OBJECT-TYPE
  685.                   SYNTAX  INTEGER (0..65535)
  686.                   ACCESS  read-write
  687.                   STATUS  mandatory
  688.                   DESCRIPTION
  689.                           "The R20 restart retransmission count."
  690.                   REFERENCE "10733 5.9 restartCount;
  691.                           See ISO 8208    Section 4.1, table 27"
  692.                   ::= { x25AdmnEntry 15 }
  693.  
  694.           x25AdmnResetCount OBJECT-TYPE
  695.                   SYNTAX  INTEGER (0..65535)
  696.                   ACCESS  read-write
  697.                   STATUS  mandatory
  698.                   DESCRIPTION
  699.                           "The r22 Reset retransmission count."
  700.                   REFERENCE "10733 resetCount;
  701.                           See section ISO 8208 8.1, table 27"
  702.                   ::= { x25AdmnEntry 16 }
  703.  
  704.           x25AdmnClearCount OBJECT-TYPE
  705.                   SYNTAX  INTEGER (0..65535)
  706.                   ACCESS  read-write
  707.                   STATUS  mandatory
  708.                   DESCRIPTION
  709.                   "The r23 Clear retransmission count."
  710.                   REFERENCE "10733 clearCount;
  711.                           See ISO 8208 Section 5.5.1, table 27"
  712.                   ::= { x25AdmnEntry 17 }
  713.  
  714.           x25AdmnDataRxmtCount OBJECT-TYPE
  715.                   SYNTAX  INTEGER (0..65535)
  716.                   ACCESS  read-write
  717.                   STATUS  mandatory
  718.                   DESCRIPTION
  719.                           "The R25 Data retransmission count.  This
  720.                           value is irrelevant if the
  721.                           x25AdmnDataRxmtTimer indicates no timer in
  722.                           use."
  723.                   REFERENCE "10733 5.10.1 dataRetransmissionCount (opt)
  724.                           See ISO 8208 Section 11.2.1, table 27"
  725.                   ::= { x25AdmnEntry 18 }
  726.  
  727.  
  728.  
  729.  
  730. Throop                                                         [Page 13]
  731.  
  732. RFC 1382                 X.25 Packet Layer MIB             November 1992
  733.  
  734.  
  735.           x25AdmnRejectCount OBJECT-TYPE
  736.                   SYNTAX  INTEGER (0..65535)
  737.                   ACCESS  read-write
  738.                   STATUS  mandatory
  739.                   DESCRIPTION
  740.                           "The R27 reject retransmission count.  This
  741.                           value is irrelevant if the
  742.                           x25AdmnRejectTimer indicates no timer in
  743.                           use."
  744.                   REFERENCE "10733 5.10.1 dataRejectCount (opt)"
  745.                   ::= { x25AdmnEntry 19 }
  746.  
  747.           x25AdmnRegistrationRequestCount OBJECT-TYPE
  748.                   SYNTAX  INTEGER (0..65535)
  749.                   ACCESS  read-write
  750.                   STATUS  mandatory
  751.                   DESCRIPTION
  752.                           "The R28 Registration retransmission Count.
  753.                           This value is irrelevant if the
  754.                           x25AdmnRegistrationRequestTimer indicates no
  755.                           timer in use."
  756.                   REFERENCE "10733 5.8.1 registrationRequestCount (opt);
  757.                           See ISO 8208    Section 13.1.1.1, table 27"
  758.                   ::= { x25AdmnEntry 20 }
  759.  
  760.           x25AdmnNumberPVCs OBJECT-TYPE
  761.                   SYNTAX  INTEGER (0..4096)
  762.                   ACCESS  read-write
  763.                   STATUS  mandatory
  764.                   DESCRIPTION
  765.                           "The number of PVC configured for this PLE.
  766.                           The PVCs use channel numbers from 1 to this
  767.                           number."
  768.                   ::= { x25AdmnEntry 21 }
  769.  
  770.           x25AdmnDefCallParamId OBJECT-TYPE
  771.                   SYNTAX  OBJECT IDENTIFIER
  772.                   ACCESS  read-write
  773.                   STATUS  mandatory
  774.                   DESCRIPTION
  775.                           "This identifies the instance of the
  776.                           x25CallParmIndex for the entry in the
  777.                           x25CallParmTable which contains the default
  778.                           call parameters for this PLE."
  779.                   ::= { x25AdmnEntry 22 }
  780.  
  781.           x25AdmnLocalAddress OBJECT-TYPE
  782.                   SYNTAX  X121Address
  783.  
  784.  
  785.  
  786. Throop                                                         [Page 14]
  787.  
  788. RFC 1382                 X.25 Packet Layer MIB             November 1992
  789.  
  790.  
  791.                   ACCESS  read-write
  792.                   STATUS  mandatory
  793.                   DESCRIPTION
  794.                           "The local address for this PLE subnetwork.
  795.                           A zero length address maybe returned by PLEs
  796.                           that only support PVCs."
  797.                   REFERENCE "10733 5.9 localDTEAddress"
  798.                   ::= { x25AdmnEntry 23 }
  799.  
  800.           x25AdmnProtocolVersionSupported OBJECT-TYPE
  801.                   SYNTAX  OBJECT IDENTIFIER
  802.                   ACCESS  read-write
  803.                   STATUS  mandatory
  804.                   DESCRIPTION
  805.                           "Identifies the version of the X.25 protocol
  806.                           this interface should support.  Object
  807.                           identifiers for common versions are defined
  808.                           below in the x25ProtocolVersion subtree."
  809.                   REFERENCE "10733 5.9 protocolVersionSupported"
  810.                   ::= { x25AdmnEntry 24 }
  811.  
  812.  
  813.           -- ###########################################################
  814.           --            X.25 Operational Table
  815.           -- ###########################################################
  816.  
  817.           x25OperTable OBJECT-TYPE
  818.                   SYNTAX  SEQUENCE OF X25OperEntry
  819.                   ACCESS  not-accessible
  820.                   STATUS  mandatory
  821.                   DESCRIPTION
  822.                           "The operation parameters in use by the X.25
  823.                           PLE."
  824.                   ::= { x25 2 }
  825.  
  826.           x25OperEntry OBJECT-TYPE
  827.                   SYNTAX  X25OperEntry
  828.                   ACCESS  not-accessible
  829.                   STATUS  mandatory
  830.                   DESCRIPTION
  831.                           "Entries of x25OperTable."
  832.                   INDEX { x25OperIndex }
  833.                   ::= { x25OperTable 1 }
  834.  
  835.           X25OperEntry ::= SEQUENCE {
  836.                   x25OperIndex
  837.                           IfIndexType,
  838.                   x25OperInterfaceMode
  839.  
  840.  
  841.  
  842. Throop                                                         [Page 15]
  843.  
  844. RFC 1382                 X.25 Packet Layer MIB             November 1992
  845.  
  846.  
  847.                           INTEGER,
  848.                   x25OperMaxActiveCircuits
  849.                           INTEGER,
  850.                   x25OperPacketSequencing
  851.                           INTEGER,
  852.                   x25OperRestartTimer
  853.                           PositiveInteger,
  854.                   x25OperCallTimer
  855.                           PositiveInteger,
  856.                   x25OperResetTimer
  857.                           PositiveInteger,
  858.                   x25OperClearTimer
  859.                           PositiveInteger,
  860.                   x25OperWindowTimer
  861.                           PositiveInteger,
  862.                   x25OperDataRxmtTimer
  863.                           PositiveInteger,
  864.                   x25OperInterruptTimer
  865.                           PositiveInteger,
  866.                   x25OperRejectTimer
  867.                           PositiveInteger,
  868.                x25OperRegistrationRequestTimer
  869.                           PositiveInteger,
  870.                   x25OperMinimumRecallTimer
  871.                           PositiveInteger,
  872.                   x25OperRestartCount
  873.                           INTEGER,
  874.                   x25OperResetCount
  875.                           INTEGER,
  876.                   x25OperClearCount
  877.                           INTEGER,
  878.                   x25OperDataRxmtCount
  879.                           INTEGER,
  880.                   x25OperRejectCount
  881.                           INTEGER,
  882.                   x25OperRegistrationRequestCount
  883.                           INTEGER,
  884.                   x25OperNumberPVCs
  885.                           INTEGER,
  886.                   x25OperDefCallParamId
  887.                           OBJECT IDENTIFIER,
  888.                   x25OperLocalAddress
  889.                           X121Address,
  890.                   x25OperDataLinkId
  891.                           OBJECT IDENTIFIER,
  892.                   x25OperProtocolVersionSupported
  893.                           OBJECT IDENTIFIER
  894.                   }
  895.  
  896.  
  897.  
  898. Throop                                                         [Page 16]
  899.  
  900. RFC 1382                 X.25 Packet Layer MIB             November 1992
  901.  
  902.  
  903.           x25OperIndex OBJECT-TYPE
  904.                   SYNTAX  IfIndexType
  905.                   ACCESS  read-only
  906.                   STATUS  mandatory
  907.                   DESCRIPTION
  908.                           "The ifIndex value for the X.25 interface."
  909.                   ::= { x25OperEntry 1 }
  910.  
  911.           x25OperInterfaceMode OBJECT-TYPE
  912.                   SYNTAX  INTEGER {
  913.                                   dte (1),
  914.                                   dce (2),
  915.                                   dxe (3)
  916.                           }
  917.                   ACCESS  read-only
  918.                   STATUS  mandatory
  919.                   DESCRIPTION
  920.                   "Identifies DCE/DTE mode in which the
  921.                           interface operates.  A value of dxe
  922.                           indicates the role will be determined by XID
  923.                           negotiation at the Link Layer and that
  924.                           negotiation has not yet taken place."
  925.                   REFERENCE "10733 5.9 interfaceMode"
  926.                   ::= { x25OperEntry 2 }
  927.  
  928.           x25OperMaxActiveCircuits        OBJECT-TYPE
  929.                   SYNTAX  INTEGER (0..4096)
  930.                   ACCESS  read-only
  931.                   STATUS  mandatory
  932.                   DESCRIPTION
  933.                           "Maximum number of circuits this PLE can
  934.                           support."
  935.                   REFERENCE "10733 5.9 maxActiveCircuits
  936.                           See ISO 8208, Section 3.7"
  937.                   ::= { x25OperEntry 3 }
  938.  
  939.           x25OperPacketSequencing OBJECT-TYPE
  940.                   SYNTAX  INTEGER {
  941.                                   modulo8 (1),
  942.                                   modulo128 (2)
  943.                           }
  944.                   ACCESS  read-only
  945.                   STATUS  mandatory
  946.                   DESCRIPTION
  947.                           "The modulus of the packet sequence number
  948.                           space."
  949.                   REFERENCE "10733 extendedPacketSequencing;
  950.                           See ISO 8208    Section 7.1.1"
  951.  
  952.  
  953.  
  954. Throop                                                         [Page 17]
  955.  
  956. RFC 1382                 X.25 Packet Layer MIB             November 1992
  957.  
  958.  
  959.                   ::= { x25OperEntry 4 }
  960.  
  961.           x25OperRestartTimer OBJECT-TYPE
  962.                   SYNTAX  PositiveInteger
  963.                   ACCESS  read-only
  964.                   STATUS  mandatory
  965.                   DESCRIPTION
  966.                           "The T20 restart timer in milliseconds."
  967.                   REFERENCE "10733 5.9 restartTime;
  968.                           See ISO 8208    Section 4.1, table 26"
  969.                   ::= { x25OperEntry 5 }
  970.  
  971.           x25OperCallTimer OBJECT-TYPE
  972.                   SYNTAX  PositiveInteger
  973.                   ACCESS  read-only
  974.                   STATUS  mandatory
  975.                   DESCRIPTION
  976.                           "The T21 Call timer in milliseconds."
  977.                   REFERENCE "10733 callTime;
  978.                           See ISO 8208 Section 5.2.1, table 26"
  979.                   ::= { x25OperEntry 6 }
  980.  
  981.           x25OperResetTimer OBJECT-TYPE
  982.                   SYNTAX  PositiveInteger
  983.                   ACCESS  read-only
  984.                   STATUS  mandatory
  985.                   DESCRIPTION
  986.                           "The T22 Reset timer in milliseconds."
  987.                   REFERENCE "10733 resetTime;
  988.                           See ISO 8208    Section 8.1, table 26"
  989.                   ::= { x25OperEntry 7 }
  990.  
  991.           x25OperClearTimer OBJECT-TYPE
  992.                   SYNTAX  PositiveInteger
  993.                   ACCESS  read-only
  994.                   STATUS  mandatory
  995.                   DESCRIPTION
  996.                           "The T23 Clear timer in milliseconds."
  997.                   REFERENCE "10733 clearTime;
  998.                           See ISO 8208 Section 5.5.1, table 26"
  999.                   ::= { x25OperEntry 8 }
  1000.  
  1001.           x25OperWindowTimer OBJECT-TYPE
  1002.                   SYNTAX  PositiveInteger
  1003.                   ACCESS  read-only
  1004.                   STATUS  mandatory
  1005.                   DESCRIPTION
  1006.                           "The T24 window status transmission timer
  1007.  
  1008.  
  1009.  
  1010. Throop                                                         [Page 18]
  1011.  
  1012. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1013.  
  1014.  
  1015.                           milliseconds.  A value of 2147483647
  1016.                           indicates no window timer in use."
  1017.                   REFERENCE "10733 5.10.1 windowTime (opt);
  1018.                           See ISO 8208 Section 11.2.2, table 26"
  1019.                   ::= { x25OperEntry 9 }
  1020.  
  1021.           x25OperDataRxmtTimer OBJECT-TYPE
  1022.                   SYNTAX  PositiveInteger
  1023.                   ACCESS  read-only
  1024.                   STATUS  mandatory
  1025.                   DESCRIPTION
  1026.                           "The T25 Data Retransmission timer in
  1027.                           milliseconds.  A value of 2147483647
  1028.                           indicates no data retransmission timer in
  1029.                           use."
  1030.                   REFERENCE "10733 5.10.1 dataRetransmissionTime (opt);
  1031.                           See ISO 8208 Section 11.2.1, table 26"
  1032.                   ::= { x25OperEntry 10 }
  1033.  
  1034.           x25OperInterruptTimer OBJECT-TYPE
  1035.                   SYNTAX  PositiveInteger
  1036.                   ACCESS  read-only
  1037.                   STATUS  mandatory
  1038.                   DESCRIPTION
  1039.                           "The T26 Interrupt timer in milliseconds.  A
  1040.                           value of 2147483647 indicates interrupts are
  1041.                           not being used."
  1042.                   REFERENCE "10733 interruptTime;
  1043.                           See ISO 8208 Section 6.8.1, table 26"
  1044.                   ::= { x25OperEntry 11 }
  1045.  
  1046.           x25OperRejectTimer OBJECT-TYPE
  1047.                   SYNTAX  PositiveInteger
  1048.                   ACCESS  read-only
  1049.                   STATUS  mandatory
  1050.                   DESCRIPTION
  1051.                           "The T27 Reject retransmission timer in
  1052.                           milliseconds.  A value of 2147483647
  1053.                           indicates no reject timer in use."
  1054.                   REFERENCE "10733 5.10.1 dataRejectTime (opt);
  1055.                           See ISO 8208 Section 13.4.1, table 26"
  1056.                   ::= { x25OperEntry 12 }
  1057.  
  1058.           x25OperRegistrationRequestTimer OBJECT-TYPE
  1059.                   SYNTAX  PositiveInteger
  1060.                   ACCESS  read-only
  1061.                   STATUS  mandatory
  1062.                   DESCRIPTION
  1063.  
  1064.  
  1065.  
  1066. Throop                                                         [Page 19]
  1067.  
  1068. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1069.  
  1070.  
  1071.                           "The T28 registration timer in milliseconds.
  1072.                           A value of 2147483647 indicates no
  1073.                           registration timer in use."
  1074.                   REFERENCE "10733 5.8.1 registrationRequestTime (opt);
  1075.                           See ISO 8208    Section 13.1.1.1, table 26"
  1076.                   ::= { x25OperEntry 13 }
  1077.  
  1078.           x25OperMinimumRecallTimer OBJECT-TYPE
  1079.                   SYNTAX  PositiveInteger
  1080.                   ACCESS  read-only
  1081.                   STATUS  mandatory
  1082.                   DESCRIPTION
  1083.                           "Minimum time interval between unsuccessful
  1084.                           call attempts in milliseconds."
  1085.                   REFERENCE "10733 5.9 minimum RecallTimer"
  1086.                   ::= { x25OperEntry 14 }
  1087.  
  1088.           x25OperRestartCount OBJECT-TYPE
  1089.                   SYNTAX  INTEGER (0..65535)
  1090.                   ACCESS  read-only
  1091.                   STATUS  mandatory
  1092.                   DESCRIPTION
  1093.                           "The R20 restart retransmission count."
  1094.                   REFERENCE "10733 5.9 restartCount
  1095.                           See ISO 8208    Section 4.1, table 27"
  1096.                   ::= { x25OperEntry 15 }
  1097.  
  1098.           x25OperResetCount OBJECT-TYPE
  1099.                   SYNTAX  INTEGER (0..65535)
  1100.                   ACCESS  read-only
  1101.                   STATUS  mandatory
  1102.                   DESCRIPTION
  1103.                           "The r22 Reset retransmission count."
  1104.                   REFERENCE "10733 resetCount;
  1105.                           See section ISO 8208 8.1, table 27"
  1106.                   ::= { x25OperEntry 16 }
  1107.  
  1108.           x25OperClearCount OBJECT-TYPE
  1109.                   SYNTAX  INTEGER (0..65535)
  1110.                   ACCESS  read-only
  1111.                   STATUS  mandatory
  1112.                   DESCRIPTION
  1113.                           "The r23 Clear retransmission count."
  1114.                   REFERENCE "10733 clearCount;
  1115.                           See ISO 8208 Section 5.5.1, table 27"
  1116.                   ::= { x25OperEntry 17 }
  1117.  
  1118.           x25OperDataRxmtCount OBJECT-TYPE
  1119.  
  1120.  
  1121.  
  1122. Throop                                                         [Page 20]
  1123.  
  1124. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1125.  
  1126.  
  1127.                   SYNTAX  INTEGER (0..65535)
  1128.                   ACCESS  read-only
  1129.                   STATUS  mandatory
  1130.                   DESCRIPTION
  1131.                           "The R25 Data retransmission count.  This
  1132.                           value is undefined if the
  1133.                           x25OperDataRxmtTimer indicates no timer in
  1134.                           use."
  1135.                   REFERENCE "10733 5.10.1 dataRetransmissionCount (opt);
  1136.                           See ISO 8208 Section 11.2.1, table 27"
  1137.                   ::= { x25OperEntry 18 }
  1138.  
  1139.           x25OperRejectCount OBJECT-TYPE
  1140.                   SYNTAX  INTEGER (0..65535)
  1141.                   ACCESS  read-only
  1142.                   STATUS  mandatory
  1143.                   DESCRIPTION
  1144.                           "The R27 reject retransmission count.  This
  1145.                           value is undefined if the x25OperRejectTimer
  1146.                           indicates no timer in use."
  1147.                   REFERENCE "10733 5.10.1 dataRejectCount (opt)"
  1148.                   ::= { x25OperEntry 19 }
  1149.  
  1150.           x25OperRegistrationRequestCount OBJECT-TYPE
  1151.                   SYNTAX  INTEGER (0..65535)
  1152.                   ACCESS  read-only
  1153.                   STATUS  mandatory
  1154.                   DESCRIPTION
  1155.                           "The R28 Registration retransmission Count.
  1156.                           This value is undefined if the
  1157.                           x25OperREgistrationRequestTimer indicates no
  1158.                           timer in use."
  1159.                   REFERENCE "10733 5.8.1 registrationRequestCount (opt);
  1160.                           See ISO 8208    Section 13.1.1.1, table 27"
  1161.                   ::= { x25OperEntry 20 }
  1162.  
  1163.           x25OperNumberPVCs OBJECT-TYPE
  1164.                   SYNTAX  INTEGER (0..4096)
  1165.                   ACCESS  read-only
  1166.                   STATUS  mandatory
  1167.                   DESCRIPTION
  1168.                           "The number of PVC configured for this PLE.
  1169.                           The PVCs use channel numbers from 1 to this
  1170.                           number."
  1171.                   ::= { x25OperEntry 21 }
  1172.  
  1173.           x25OperDefCallParamId OBJECT-TYPE
  1174.                   SYNTAX  OBJECT IDENTIFIER
  1175.  
  1176.  
  1177.  
  1178. Throop                                                         [Page 21]
  1179.  
  1180. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1181.  
  1182.  
  1183.                   ACCESS  read-only
  1184.                   STATUS  mandatory
  1185.                   DESCRIPTION
  1186.                           "This identifies the instance of the
  1187.                           x25CallParmIndex for the entry in the
  1188.                           x25CallParmTable that contains the default
  1189.                           call parameters for this PLE."
  1190.                   ::= { x25OperEntry 22 }
  1191.  
  1192.           x25OperLocalAddress OBJECT-TYPE
  1193.                   SYNTAX  X121Address
  1194.                   ACCESS  read-only
  1195.                   STATUS  mandatory
  1196.                   DESCRIPTION
  1197.                           "The local address for this PLE subnetwork.
  1198.                           A zero length address maybe returned by PLEs
  1199.                           that only support PVCs."
  1200.                   REFERENCE "10733 5.9 localDTEAddress"
  1201.                   ::= { x25OperEntry 23 }
  1202.  
  1203.           x25OperDataLinkId OBJECT-TYPE
  1204.                   SYNTAX  OBJECT IDENTIFIER
  1205.                   ACCESS  read-only
  1206.                   STATUS  mandatory
  1207.                   DESCRIPTION
  1208.                           "This identifies the instance of the index
  1209.                           object in the first table of the most device
  1210.                           specific MIB for the interface used by this
  1211.                           PLE."
  1212.                   ::= { x25OperEntry 24 }
  1213.  
  1214.           x25OperProtocolVersionSupported OBJECT-TYPE
  1215.                   SYNTAX  OBJECT IDENTIFIER
  1216.                   ACCESS  read-only
  1217.                   STATUS  mandatory
  1218.                   DESCRIPTION
  1219.                           "Identifies the version of the X.25 protocol
  1220.                           this interface supports.  Object identifiers
  1221.                           for common versions are defined below in the
  1222.                           x25ProtocolVersion subtree."
  1223.                   REFERENCE "10733 5.9 protocolVersionSupported"
  1224.                   ::= { x25OperEntry 25 }
  1225.  
  1226.  
  1227.           --      MIB-II also provides:
  1228.  
  1229.           -- ifDescr:
  1230.           -- On an X.25 interface this must include sufficient
  1231.  
  1232.  
  1233.  
  1234. Throop                                                         [Page 22]
  1235.  
  1236. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1237.  
  1238.  
  1239.           -- information to enable the system's administrator
  1240.           -- to determine the appropriate configuration
  1241.           -- information on a system having multiple X.25
  1242.           -- subnetworks.
  1243.  
  1244.           -- ifType: ddn-x25 or rfc877-x25
  1245.           --      an interface of type ddn-x25 will use an algorithm to
  1246.           --      translate between X.121 address and IP addresses.
  1247.           --      An interface of type rfc877-x25 will use a
  1248.           --      configuration table to translate between X.121
  1249.           --      addresses and IP addresses.
  1250.  
  1251.           -- ifMtu: the maximum PDU a higher layer can pass to X.25 or
  1252.           -- receive from X.25
  1253.  
  1254.           -- ifSpeed:
  1255.           -- This will be the value of the local clock for this line.
  1256.           -- A value of zero indicates external clocking.
  1257.  
  1258.           -- ifAdminStatus:
  1259.  
  1260.           -- ifOperStatus
  1261.  
  1262.           -- ifLastChange
  1263.  
  1264.  
  1265.           -- ###########################################################
  1266.           --            X.25 Statistics Table
  1267.           -- ###########################################################
  1268.  
  1269.           x25StatTable OBJECT-TYPE
  1270.                   SYNTAX  SEQUENCE OF X25StatEntry
  1271.                   ACCESS  not-accessible
  1272.                   STATUS  mandatory
  1273.                   DESCRIPTION
  1274.                           "Statistics information about this X.25
  1275.                           PLE."
  1276.                   ::= { x25 3 }
  1277.  
  1278.           x25StatEntry OBJECT-TYPE
  1279.                   SYNTAX  X25StatEntry
  1280.                   ACCESS  not-accessible
  1281.                   STATUS  mandatory
  1282.                   DESCRIPTION
  1283.                            "Entries of the x25StatTable."
  1284.                            INDEX { x25StatIndex }
  1285.                   ::= { x25StatTable 1 }
  1286.  
  1287.  
  1288.  
  1289.  
  1290. Throop                                                         [Page 23]
  1291.  
  1292. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1293.  
  1294.  
  1295.           X25StatEntry ::= SEQUENCE {
  1296.                   x25StatIndex
  1297.                           IfIndexType,
  1298.                   x25StatInCalls
  1299.                           Counter,
  1300.                   x25StatInCallRefusals
  1301.                           Counter,
  1302.                   x25StatInProviderInitiatedClears
  1303.                           Counter,
  1304.                   x25StatInRemotelyInitiatedResets
  1305.                           Counter,
  1306.                   x25StatInProviderInitiatedResets
  1307.                           Counter,
  1308.                   x25StatInRestarts
  1309.                           Counter,
  1310.                   x25StatInDataPackets
  1311.                           Counter,
  1312.                   x25StatInAccusedOfProtocolErrors
  1313.                           Counter,
  1314.                   x25StatInInterrupts
  1315.                           Counter,
  1316.                   x25StatOutCallAttempts
  1317.                           Counter,
  1318.                   x25StatOutCallFailures
  1319.                           Counter,
  1320.                   x25StatOutInterrupts
  1321.                           Counter,
  1322.                   x25StatOutDataPackets
  1323.                           Counter,
  1324.                   x25StatOutgoingCircuits
  1325.                           Gauge,
  1326.                   x25StatIncomingCircuits
  1327.                           Gauge,
  1328.                   x25StatTwowayCircuits
  1329.                           Gauge,
  1330.                   x25StatRestartTimeouts
  1331.                           Counter,
  1332.                   x25StatCallTimeouts
  1333.                           Counter,
  1334.                   x25StatResetTimeouts
  1335.                           Counter,
  1336.                   x25StatClearTimeouts
  1337.                           Counter,
  1338.                   x25StatDataRxmtTimeouts
  1339.                           Counter,
  1340.                   x25StatInterruptTimeouts
  1341.                           Counter,
  1342.                   x25StatRetryCountExceededs
  1343.  
  1344.  
  1345.  
  1346. Throop                                                         [Page 24]
  1347.  
  1348. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1349.  
  1350.  
  1351.                           Counter,
  1352.                   x25StatClearCountExceededs
  1353.                           Counter
  1354.                   }
  1355.  
  1356.           x25StatIndex OBJECT-TYPE
  1357.                   SYNTAX  IfIndexType
  1358.                   ACCESS  read-only
  1359.                   STATUS  mandatory
  1360.                   DESCRIPTION
  1361.                           "The ifIndex value for the X.25 interface."
  1362.                   ::= { x25StatEntry 1 }
  1363.  
  1364.           x25StatInCalls OBJECT-TYPE
  1365.                   SYNTAX  Counter
  1366.                   ACCESS  read-only
  1367.                   STATUS  mandatory
  1368.                   DESCRIPTION
  1369.                           "The number of incoming calls received."
  1370.                   ::= { x25StatEntry 2 }
  1371.  
  1372.           x25StatInCallRefusals OBJECT-TYPE
  1373.                   SYNTAX  Counter
  1374.                   ACCESS  read-only
  1375.                   STATUS  mandatory
  1376.                   DESCRIPTION
  1377.                           "The number of incoming calls refused.  This
  1378.                           includes calls refused by the PLE and by
  1379.                           higher layers.  This also includes calls
  1380.                           cleared because of restricted fast select."
  1381.                   ::= { x25StatEntry 3 }
  1382.  
  1383.           x25StatInProviderInitiatedClears        OBJECT-TYPE
  1384.                   SYNTAX  Counter
  1385.                   ACCESS  read-only
  1386.                   STATUS  mandatory
  1387.                   DESCRIPTION
  1388.                           "The number of clear requests with a cause
  1389.                           code other than DTE initiated."
  1390.                           REFERENCE "10733 providerInitiatedDisconnect"
  1391.                   ::= { x25StatEntry 4 }
  1392.  
  1393.           x25StatInRemotelyInitiatedResets        OBJECT-TYPE
  1394.                   SYNTAX  Counter
  1395.                   ACCESS  read-only
  1396.                   STATUS  mandatory
  1397.                   DESCRIPTION
  1398.                           "The number of reset requests received with
  1399.  
  1400.  
  1401.  
  1402. Throop                                                         [Page 25]
  1403.  
  1404. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1405.  
  1406.  
  1407.                           cause code DTE initiated."
  1408.                   REFERENCE "10733 remotelyInitiatedResets"
  1409.                   ::= { x25StatEntry 5 }
  1410.  
  1411.           x25StatInProviderInitiatedResets        OBJECT-TYPE
  1412.                   SYNTAX  Counter
  1413.                   ACCESS  read-only
  1414.                   STATUS  mandatory
  1415.                   DESCRIPTION
  1416.                           "The number of reset requests received with
  1417.                           cause code other than DTE initiated."
  1418.                   REFERENCE "10733 ProviderInitiatedResets"
  1419.                   ::= { x25StatEntry 6 }
  1420.  
  1421.           x25StatInRestarts OBJECT-TYPE
  1422.                   SYNTAX  Counter
  1423.                   ACCESS  read-only
  1424.                   STATUS  mandatory
  1425.                   DESCRIPTION
  1426.                           "The number of remotely initiated (including
  1427.                           provider initiated) restarts experienced by
  1428.                           the PLE excluding the restart associated
  1429.                           with bringing up the PLE interface.  This
  1430.                           only counts restarts received when the PLE
  1431.                           already has an established connection with
  1432.                           the remove PLE."
  1433.                   REFERENCE "10733 5.9 remotelyInitiatedRestarts"
  1434.                   ::= { x25StatEntry 7 }
  1435.  
  1436.           x25StatInDataPackets    OBJECT-TYPE
  1437.                   SYNTAX  Counter
  1438.                   ACCESS  read-only
  1439.                   STATUS  mandatory
  1440.                   DESCRIPTION
  1441.                           "The number of data packets received."
  1442.                           REFERENCE "10733 5.9 dataPacketsReceived."
  1443.                   ::= { x25StatEntry 8 }
  1444.  
  1445.           x25StatInAccusedOfProtocolErrors        OBJECT-TYPE
  1446.                   SYNTAX  Counter
  1447.                   ACCESS  read-only
  1448.                   STATUS  mandatory
  1449.                   DESCRIPTION
  1450.                           "The number of packets received containing a
  1451.                           procedure error cause code.  These include
  1452.                           clear, reset, restart, or diagnostic
  1453.                           packets."
  1454.                   REFERENCE "CD 10733 5.9 accusedOfProtocolError"
  1455.  
  1456.  
  1457.  
  1458. Throop                                                         [Page 26]
  1459.  
  1460. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1461.  
  1462.  
  1463.                   ::= { x25StatEntry 9 }
  1464.  
  1465.           x25StatInInterrupts OBJECT-TYPE
  1466.                   SYNTAX  Counter
  1467.                   ACCESS  read-only
  1468.                   STATUS  mandatory
  1469.                   DESCRIPTION
  1470.                           "The number of interrupt packets received by
  1471.                           the PLE or over the PVC/VC."
  1472.                   REFERENCE "10733 interruptPacketsReceived"
  1473.                   ::= { x25StatEntry 10 }
  1474.  
  1475.           x25StatOutCallAttempts OBJECT-TYPE
  1476.                   SYNTAX  Counter
  1477.                   ACCESS  read-only
  1478.                   STATUS  mandatory
  1479.                   DESCRIPTION
  1480.                           "The number of calls attempted."
  1481.                   REFERENCE "10733 5.9 callAttempts"
  1482.                   ::= { x25StatEntry 11 }
  1483.  
  1484.           x25StatOutCallFailures OBJECT-TYPE
  1485.                   SYNTAX  Counter
  1486.                   ACCESS  read-only
  1487.                   STATUS  mandatory
  1488.                   DESCRIPTION
  1489.                           "The number of call attempts which failed.
  1490.                           This includes calls that were cleared
  1491.                           because of restrictive fast select."
  1492.                   ::= { x25StatEntry 12 }
  1493.  
  1494.           x25StatOutInterrupts    OBJECT-TYPE
  1495.                   SYNTAX  Counter
  1496.                   ACCESS  read-only
  1497.                   STATUS  mandatory
  1498.                   DESCRIPTION
  1499.                           "The number of interrupt packets send by the
  1500.                           PLE or over the PVC/VC."
  1501.                   REFERENCE "10733 InterruptPacketsSent"
  1502.                   ::= { x25StatEntry 13 }
  1503.  
  1504.           x25StatOutDataPackets   OBJECT-TYPE
  1505.                   SYNTAX  Counter
  1506.                   ACCESS  read-only
  1507.                   STATUS  mandatory
  1508.                   DESCRIPTION
  1509.                           "The number of data packets sent by this
  1510.                           PLE."
  1511.  
  1512.  
  1513.  
  1514. Throop                                                         [Page 27]
  1515.  
  1516. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1517.  
  1518.  
  1519.                   REFERENCE "10733 dataPacketSent"
  1520.                   ::= { x25StatEntry 14 }
  1521.  
  1522.           x25StatOutgoingCircuits OBJECT-TYPE
  1523.                   SYNTAX  Gauge
  1524.                   ACCESS  read-only
  1525.                   STATUS  mandatory
  1526.                   DESCRIPTION
  1527.                           "The number of active outgoing circuits.
  1528.                           This includes call requests sent but not yet
  1529.                           confirmed.  This does not count PVCs."
  1530.                   ::= { x25StatEntry 15 }
  1531.  
  1532.           x25StatIncomingCircuits OBJECT-TYPE
  1533.                   SYNTAX  Gauge
  1534.                   ACCESS  read-only
  1535.                   STATUS  mandatory
  1536.                   DESCRIPTION
  1537.                           "The number of active Incoming Circuits.
  1538.                           This includes call indications received but
  1539.                           not yet acknowledged.  This does not count
  1540.                           PVCs."
  1541.                   ::= { x25StatEntry 16 }
  1542.  
  1543.           x25StatTwowayCircuits   OBJECT-TYPE
  1544.                   SYNTAX  Gauge
  1545.                   ACCESS  read-only
  1546.                   STATUS  mandatory
  1547.                   DESCRIPTION
  1548.                   "The number of active two-way Circuits.
  1549.                           This includes call requests sent but not yet
  1550.                           confirmed.  This does not count PVCs."
  1551.                   ::= { x25StatEntry 17 }
  1552.  
  1553.           x25StatRestartTimeouts OBJECT-TYPE
  1554.                   SYNTAX  Counter
  1555.                   ACCESS  read-only
  1556.                   STATUS  mandatory
  1557.                   DESCRIPTION
  1558.                           "The number of times the T20 restart timer
  1559.                           expired."
  1560.                   REFERENCE "10733 5.9 restartTimeouts"
  1561.                   ::= { x25StatEntry 18 }
  1562.  
  1563.           x25StatCallTimeouts OBJECT-TYPE
  1564.                   SYNTAX  Counter
  1565.                   ACCESS  read-only
  1566.                   STATUS  mandatory
  1567.  
  1568.  
  1569.  
  1570. Throop                                                         [Page 28]
  1571.  
  1572. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1573.  
  1574.  
  1575.                   DESCRIPTION
  1576.                           "The number of times the T21 call timer
  1577.                           expired."
  1578.                   REFERENCE "10733 5.9 callTimeouts"
  1579.                   ::= { x25StatEntry 19 }
  1580.  
  1581.           x25StatResetTimeouts    OBJECT-TYPE
  1582.                   SYNTAX  Counter
  1583.                   ACCESS  read-only
  1584.                   STATUS  mandatory
  1585.                   DESCRIPTION
  1586.                           "The number of times the T22 reset timer
  1587.                           expired."
  1588.                   REFERENCE "10733 5.9 resetTimeouts"
  1589.                   ::= { x25StatEntry 20 }
  1590.  
  1591.           x25StatClearTimeouts    OBJECT-TYPE
  1592.                   SYNTAX  Counter
  1593.                   ACCESS  read-only
  1594.                   STATUS  mandatory
  1595.                   DESCRIPTION
  1596.                           "The number of times the T23 clear timer
  1597.                           expired."
  1598.                   REFERENCE "10733 5.9 clearTimeouts"
  1599.                   ::= { x25StatEntry 21 }
  1600.  
  1601.           x25StatDataRxmtTimeouts OBJECT-TYPE
  1602.                   SYNTAX  Counter
  1603.                   ACCESS  read-only
  1604.                   STATUS  mandatory
  1605.                   DESCRIPTION
  1606.                           "The number of times the T25 data timer
  1607.                           expired."
  1608.                   REFERENCE "10733 5.9 dataRetransmissionsTimerExpiries"
  1609.                   ::= { x25StatEntry 22 }
  1610.  
  1611.           x25StatInterruptTimeouts        OBJECT-TYPE
  1612.                   SYNTAX  Counter
  1613.                   ACCESS  read-only
  1614.                   STATUS  mandatory
  1615.                   DESCRIPTION
  1616.                           "The number of times the T26 interrupt timer
  1617.                           expired."
  1618.                   REFERENCE "10733 5.9 interruptTimerExpires"
  1619.                   ::= { x25StatEntry 23 }
  1620.  
  1621.           x25StatRetryCountExceededs OBJECT-TYPE
  1622.                   SYNTAX  Counter
  1623.  
  1624.  
  1625.  
  1626. Throop                                                         [Page 29]
  1627.  
  1628. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1629.  
  1630.  
  1631.                   ACCESS  read-only
  1632.                   STATUS  mandatory
  1633.                   DESCRIPTION
  1634.                           "The number of times a retry counter was
  1635.                           exhausted."
  1636.                   REFERENCE "10733 5.9 retryCountsExceeded"
  1637.                   ::= { x25StatEntry 24 }
  1638.  
  1639.           x25StatClearCountExceededs OBJECT-TYPE
  1640.                   SYNTAX  Counter
  1641.                   ACCESS  read-only
  1642.                   STATUS  mandatory
  1643.                   DESCRIPTION
  1644.                           "The number of times the R23 clear count was
  1645.                           exceeded."
  1646.                   REFERENCE "10733 5.9 clearCountsExceeded"
  1647.                   ::= { x25StatEntry 25 }
  1648.  
  1649.  
  1650.           --      MIB-II also contains:
  1651.  
  1652.           -- ifInOctets: Number of data octets delivered to upper
  1653.           -- layer entities.
  1654.  
  1655.           -- ifInUcastPkts: Number of packets with a clear M-bit
  1656.           -- delivered to higher layer entities.
  1657.  
  1658.           -- ifDiscards: Number of packets dropped for lack of buffering
  1659.  
  1660.           -- ifInErrors: Number of packets received containing errors
  1661.             -- REFERENCE ProtocolErrorsDetectedLocally
  1662.  
  1663.           -- ifInUnknownProtos: Number of packets with unknown circuit
  1664.           -- identifier.
  1665.  
  1666.           -- ifOutOctets: Number of data octets delivered by
  1667.           --      X.25 to upper layers.
  1668.  
  1669.           -- ifOutUcastPkts: Number of packets with a clear M-bit
  1670.           -- received from higher layer entities.
  1671.  
  1672.  
  1673.           -- ###########################################################
  1674.           --                    X.25 Channel Table
  1675.           -- ###########################################################
  1676.  
  1677.           x25ChannelTable OBJECT-TYPE
  1678.                   SYNTAX  SEQUENCE OF X25ChannelEntry
  1679.  
  1680.  
  1681.  
  1682. Throop                                                         [Page 30]
  1683.  
  1684. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1685.  
  1686.  
  1687.                   ACCESS  not-accessible
  1688.                   STATUS  mandatory
  1689.                   DESCRIPTION
  1690.                           "These objects contain information about the
  1691.                           channel number configuration in an X.25 PLE.
  1692.                           These values are the configured values.
  1693.                           changes in these values after the interfaces
  1694.                           has started may not be reflected in the
  1695.                           operating PLE."
  1696.                   REFERENCE "See ISO 8208, Section 3.7"
  1697.                   ::= { x25 4 }
  1698.  
  1699.           x25ChannelEntry OBJECT-TYPE
  1700.                   SYNTAX  X25ChannelEntry
  1701.                   ACCESS  not-accessible
  1702.                   STATUS  mandatory
  1703.                   DESCRIPTION
  1704.                           "Entries of x25ChannelTable."
  1705.                   REFERENCE "This provides the information available
  1706.                           in 10733 logicalChannelAssignments."
  1707.                   INDEX { x25ChannelIndex }
  1708.                   ::= { x25ChannelTable 1    }
  1709.  
  1710.           X25ChannelEntry ::= SEQUENCE {
  1711.                   x25ChannelIndex
  1712.                           IfIndexType,
  1713.                   x25ChannelLIC
  1714.                           INTEGER,
  1715.                   x25ChannelHIC
  1716.                           INTEGER,
  1717.                   x25ChannelLTC
  1718.                           INTEGER,
  1719.                   x25ChannelHTC
  1720.                           INTEGER,
  1721.                   x25ChannelLOC
  1722.                           INTEGER,
  1723.                   x25ChannelHOC
  1724.                           INTEGER
  1725.                   }
  1726.  
  1727.           x25ChannelIndex OBJECT-TYPE
  1728.                   SYNTAX  IfIndexType
  1729.                   ACCESS  read-only
  1730.                   STATUS  mandatory
  1731.                   DESCRIPTION
  1732.                           "The ifIndex value for the X.25 Interface."
  1733.                   ::= { x25ChannelEntry 1 }
  1734.  
  1735.  
  1736.  
  1737.  
  1738. Throop                                                         [Page 31]
  1739.  
  1740. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1741.  
  1742.  
  1743.           x25ChannelLIC OBJECT-TYPE
  1744.                   SYNTAX  INTEGER (0..4095)
  1745.                   ACCESS  read-write
  1746.                   STATUS  mandatory
  1747.                   DESCRIPTION
  1748.                           "Lowest Incoming channel."
  1749.                   ::= { x25ChannelEntry 2 }
  1750.  
  1751.           x25ChannelHIC OBJECT-TYPE
  1752.                   SYNTAX  INTEGER (0..4095)
  1753.                   ACCESS  read-write
  1754.                   STATUS  mandatory
  1755.                   DESCRIPTION
  1756.                           "Highest Incoming channel.  A value of zero
  1757.                           indicates no channels in this range."
  1758.                   ::= { x25ChannelEntry 3 }
  1759.  
  1760.           x25ChannelLTC OBJECT-TYPE
  1761.                   SYNTAX  INTEGER (0..4095)
  1762.                   ACCESS  read-write
  1763.                   STATUS  mandatory
  1764.                   DESCRIPTION
  1765.                           "Lowest Two-way channel."
  1766.                   ::= { x25ChannelEntry 4 }
  1767.  
  1768.           x25ChannelHTC OBJECT-TYPE
  1769.                   SYNTAX  INTEGER (0..4095)
  1770.                   ACCESS  read-write
  1771.                   STATUS  mandatory
  1772.                   DESCRIPTION
  1773.                           "Highest Two-way channel.  A value of zero
  1774.                           indicates no channels in this range."
  1775.                   ::= { x25ChannelEntry 5 }
  1776.  
  1777.           x25ChannelLOC OBJECT-TYPE
  1778.                   SYNTAX  INTEGER (0..4095)
  1779.                   ACCESS  read-write
  1780.                   STATUS  mandatory
  1781.                   DESCRIPTION
  1782.                           "Lowest outgoing channel."
  1783.                   ::= { x25ChannelEntry 6 }
  1784.  
  1785.           x25ChannelHOC OBJECT-TYPE
  1786.                   SYNTAX  INTEGER (0..4095)
  1787.                   ACCESS  read-write
  1788.                   STATUS  mandatory
  1789.                   DESCRIPTION
  1790.                           "Highest outgoing channel.  A value of zero
  1791.  
  1792.  
  1793.  
  1794. Throop                                                         [Page 32]
  1795.  
  1796. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1797.  
  1798.  
  1799.                           indicates no channels in this range."
  1800.                   ::= { x25ChannelEntry 7 }
  1801.  
  1802.  
  1803.  
  1804.  
  1805.           -- ###########################################################
  1806.           --          X25 Per Circuits Information Table
  1807.           -- ###########################################################
  1808.  
  1809.           x25CircuitTable OBJECT-TYPE
  1810.                   SYNTAX  SEQUENCE OF X25CircuitEntry
  1811.                   ACCESS  not-accessible
  1812.                   STATUS  mandatory
  1813.                   DESCRIPTION
  1814.                           "These objects contain general information
  1815.                           about a specific circuit of an X.25 PLE."
  1816.                   ::= { x25 5 }
  1817.  
  1818.           x25CircuitEntry OBJECT-TYPE
  1819.                   SYNTAX  X25CircuitEntry
  1820.                   ACCESS  not-accessible
  1821.                   STATUS  mandatory
  1822.                   DESCRIPTION
  1823.                           "Entries of x25CircuitTable."
  1824.                   INDEX { x25CircuitIndex,
  1825.                           x25CircuitChannel }
  1826.                   ::= { x25CircuitTable 1 }
  1827.  
  1828.           X25CircuitEntry ::= SEQUENCE {
  1829.                   x25CircuitIndex
  1830.                           IfIndexType,
  1831.                   x25CircuitChannel
  1832.                           INTEGER,
  1833.                   x25CircuitStatus
  1834.                           INTEGER,
  1835.                   x25CircuitEstablishTime
  1836.                           TimeTicks,
  1837.                   x25CircuitDirection
  1838.                           INTEGER,
  1839.                   x25CircuitInOctets
  1840.                           Counter,
  1841.                   x25CircuitInPdus
  1842.                           Counter,
  1843.                   x25CircuitInRemotelyInitiatedResets
  1844.                           Counter,
  1845.                   x25CircuitInProviderInitiatedResets
  1846.                           Counter,
  1847.  
  1848.  
  1849.  
  1850. Throop                                                         [Page 33]
  1851.  
  1852. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1853.  
  1854.  
  1855.                   x25CircuitInInterrupts
  1856.                           Counter,
  1857.                   x25CircuitOutOctets
  1858.                           Counter,
  1859.                   x25CircuitOutPdus
  1860.                           Counter,
  1861.                   x25CircuitOutInterrupts
  1862.                           Counter,
  1863.                   x25CircuitDataRetransmissionTimeouts
  1864.                           Counter,
  1865.                   x25CircuitResetTimeouts
  1866.                           Counter,
  1867.                   x25CircuitInterruptTimeouts
  1868.                           Counter,
  1869.                   x25CircuitCallParamId
  1870.                           OBJECT IDENTIFIER,
  1871.                   x25CircuitCalledDteAddress
  1872.                           X121Address,
  1873.                   x25CircuitCallingDteAddress
  1874.                           X121Address,
  1875.                   x25CircuitOriginallyCalledAddress
  1876.                           X121Address,
  1877.                   x25CircuitDescr
  1878.                           DisplayString
  1879.                   }
  1880.  
  1881.           x25CircuitIndex OBJECT-TYPE
  1882.                   SYNTAX  IfIndexType
  1883.                   ACCESS  read-only
  1884.                   STATUS  mandatory
  1885.                   DESCRIPTION
  1886.                           "The ifIndex value for the X.25 Interface."
  1887.                   ::= { x25CircuitEntry 1 }
  1888.  
  1889.           x25CircuitChannel OBJECT-TYPE
  1890.                   SYNTAX  INTEGER (0..4095)
  1891.                   ACCESS  read-only
  1892.                   STATUS  mandatory
  1893.                   DESCRIPTION
  1894.                           "The channel number for this circuit."
  1895.                   ::= { x25CircuitEntry 2 }
  1896.  
  1897.           x25CircuitStatus OBJECT-TYPE
  1898.                   SYNTAX  INTEGER {               -- state table states
  1899.                                   invalid (1),
  1900.                                   closed (2),             -- (p1)
  1901.                                   calling (3),            -- (p2,p3,p5)
  1902.                                   open (4),               -- (p4)
  1903.  
  1904.  
  1905.  
  1906. Throop                                                         [Page 34]
  1907.  
  1908. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1909.  
  1910.  
  1911.                                   clearing (5),           -- (p6,p7)
  1912.                                   pvc (6),
  1913.                                   pvcResetting (7),
  1914.                                   startClear (8),         -- Close cmd
  1915.                                   startPvcResetting (9),  -- Reset cmd
  1916.                                   other (10)
  1917.                           }
  1918.                   ACCESS  read-write
  1919.                   STATUS  mandatory
  1920.                   DESCRIPTION
  1921.                           "This object reports the current status of
  1922.                           the circuit.
  1923.  
  1924.                           An existing instance of this object can only
  1925.                           be set to startClear, startPvcResetting, or
  1926.                           invalid.  An instance with the value calling
  1927.                           or open can only be set to startClear and
  1928.                           that action will start clearing the circuit.
  1929.                           An instance with the value PVC can only be
  1930.                           set to startPvcResetting or invalid and that
  1931.                           action resets the PVC or deletes the circuit
  1932.                           respectively.  The values startClear or
  1933.                           startPvcResetting will never be returned by
  1934.                           an agent.  An attempt to set the status of
  1935.                           an existing instance to a value other than
  1936.                           one of these values will result in an error.
  1937.  
  1938.                           A non-existing instance can be set to PVC to
  1939.                           create a PVC if the implementation supports
  1940.                           dynamic creation of PVCs.  Some
  1941.                           implementations may only allow creation and
  1942.                           deletion of PVCs if the interface is down.
  1943.                           Since the instance identifier will supply
  1944.                           the PLE index and the channel number,
  1945.                           setting this object alone supplies
  1946.                           sufficient information to create the
  1947.                           instance.  All the DEFVAL clauses for the
  1948.                           other objects of this table are appropriate
  1949.                           for creating a PVC; PLEs creating entries
  1950.                           for placed or accepted calls will use values
  1951.                           appropriate for the call rather than the
  1952.                           value of the DEFVAL clause.  Two managers
  1953.                           trying to create the same PVC can determine
  1954.                           from the return code which manager succeeded
  1955.                           and which failed (the failing manager fails
  1956.                           because it can not set a value of PVC for an
  1957.                           existing object).
  1958.  
  1959.  
  1960.  
  1961.  
  1962. Throop                                                         [Page 35]
  1963.  
  1964. RFC 1382                 X.25 Packet Layer MIB             November 1992
  1965.  
  1966.  
  1967.                           An entry in the closed or invalid state may
  1968.                           be deleted or reused at the agent's
  1969.                           convence.  If the entry is kept in the
  1970.                           closed state, the values of the parameters
  1971.                           associated with the entry must be correct.
  1972.                           Closed implies the values in the circuit
  1973.                           table are correct.
  1974.  
  1975.                           The value of invalid indicates the other
  1976.                           values in the table are invalid.  Many
  1977.                           agents may never return a value of invalid
  1978.                           because they dynamically allocate and free
  1979.                           unused table entries.  An agent for a
  1980.                           statically configured systems can return
  1981.                           invalid to indicate the entry has not yet
  1982.                           been used so the counters contain no
  1983.                           information."
  1984.                   REFERENCE "See ISO 8208,
  1985.                                   table 33 for (p<n>) state table"
  1986.                   ::= { x25CircuitEntry 3 }
  1987.  
  1988.           x25CircuitEstablishTime OBJECT-TYPE
  1989.                   SYNTAX  TimeTicks
  1990.                   ACCESS  read-only
  1991.                   STATUS  mandatory
  1992.                   DESCRIPTION
  1993.                           "The value of sysUpTime when the channel was
  1994.                           associated with this circuit.  For outgoing
  1995.                           SVCs, this is the time the first call packet
  1996.                           was sent.  For incoming SVCs, this is the
  1997.                           time the call indication was received.  For
  1998.                           PVCs this is the time the PVC was able to
  1999.                           pass data to a higher layer entity without
  2000.                           loss of data."
  2001.                   ::= { x25CircuitEntry 4 }
  2002.  
  2003.           x25CircuitDirection OBJECT-TYPE
  2004.                   SYNTAX  INTEGER {
  2005.                                   incoming (1),
  2006.                                   outgoing (2),
  2007.                                   pvc (3)
  2008.                           }
  2009.                   ACCESS  read-write
  2010.                   STATUS  mandatory
  2011.                   DESCRIPTION
  2012.                           "The direction of the call that established
  2013.                           this circuit."
  2014.                   REFERENCE "10733 direction"
  2015.  
  2016.  
  2017.  
  2018. Throop                                                         [Page 36]
  2019.  
  2020. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2021.  
  2022.  
  2023.                   DEFVAL { pvc }
  2024.                   ::= { x25CircuitEntry 5 }
  2025.  
  2026.                           -- X25 Circuit data flow statistics
  2027.  
  2028.           x25CircuitInOctets OBJECT-TYPE
  2029.                   SYNTAX  Counter
  2030.                   ACCESS  read-only
  2031.                   STATUS  mandatory
  2032.                   DESCRIPTION
  2033.                           "The number of octets of user data delivered
  2034.                           to upper layer."
  2035.                   REFERENCE "5.11 octetsReceivedCounter"
  2036.                   ::= { x25CircuitEntry 6 }
  2037.  
  2038.           x25CircuitInPdus OBJECT-TYPE
  2039.                   SYNTAX  Counter
  2040.                   ACCESS  read-only
  2041.                   STATUS  mandatory
  2042.                   DESCRIPTION
  2043.                           "The number of PDUs received for this
  2044.                           circuit."
  2045.                   REFERENCE "10733 5.11 dataPacketsReceived"
  2046.                   ::= { x25CircuitEntry 7 }
  2047.  
  2048.           x25CircuitInRemotelyInitiatedResets OBJECT-TYPE
  2049.                   SYNTAX  Counter
  2050.                   ACCESS  read-only
  2051.                   STATUS  mandatory
  2052.                   DESCRIPTION
  2053.                           "The number of Resets received for this
  2054.                           circuit with cause code of DTE initiated."
  2055.                   REFERENCE "10733 remotelyInitiatedResets"
  2056.                   ::= { x25CircuitEntry 8 }
  2057.  
  2058.           x25CircuitInProviderInitiatedResets OBJECT-TYPE
  2059.                   SYNTAX  Counter
  2060.                   ACCESS  read-only
  2061.                   STATUS  mandatory
  2062.                   DESCRIPTION
  2063.                           "The number of Resets received for this
  2064.                           circuit with cause code other than DTE
  2065.                           initiated."
  2066.                   REFERENCE "10733 ProviderInitiatedResets"
  2067.                   ::= { x25CircuitEntry 9 }
  2068.  
  2069.           x25CircuitInInterrupts OBJECT-TYPE
  2070.                   SYNTAX  Counter
  2071.  
  2072.  
  2073.  
  2074. Throop                                                         [Page 37]
  2075.  
  2076. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2077.  
  2078.  
  2079.                   ACCESS  read-only
  2080.                   STATUS  mandatory
  2081.                   DESCRIPTION
  2082.                           "The number of interrupt packets received
  2083.                           for this circuit."
  2084.                   REFERENCE "10733 interruptPacketsReceived"
  2085.                   ::= { x25CircuitEntry 10 }
  2086.  
  2087.           x25CircuitOutOctets OBJECT-TYPE
  2088.                   SYNTAX  Counter
  2089.                   ACCESS  read-only
  2090.                   STATUS  mandatory
  2091.                   DESCRIPTION
  2092.                           "The number of octets of user data sent for
  2093.                           this circuit."
  2094.                   REFERENCE "10733 5.11 octetsSentCounter"
  2095.                   ::= { x25CircuitEntry 11 }
  2096.  
  2097.           x25CircuitOutPdus OBJECT-TYPE
  2098.                   SYNTAX  Counter
  2099.                   ACCESS  read-only
  2100.                   STATUS  mandatory
  2101.                   DESCRIPTION
  2102.                           "The number of PDUs sent for this circuit."
  2103.                   REFERENCE "10733 5.11 dataPacketsSent"
  2104.                   ::= { x25CircuitEntry 12 }
  2105.  
  2106.           x25CircuitOutInterrupts OBJECT-TYPE
  2107.                   SYNTAX  Counter
  2108.                   ACCESS  read-only
  2109.                   STATUS  mandatory
  2110.                   DESCRIPTION
  2111.                           "The number of interrupt packets sent on
  2112.                           this circuit."
  2113.                   REFERENCE "10733 interruptPacketsSent"
  2114.                   ::= { x25CircuitEntry 13 }
  2115.  
  2116.  
  2117.                           -- X25 circuit timer statistics
  2118.  
  2119.           x25CircuitDataRetransmissionTimeouts OBJECT-TYPE
  2120.                   SYNTAX  Counter
  2121.                   ACCESS  read-only
  2122.                   STATUS  mandatory
  2123.                   DESCRIPTION
  2124.                           "The number of times the T25 data
  2125.                           retransmission timer expired for this
  2126.                           circuit."
  2127.  
  2128.  
  2129.  
  2130. Throop                                                         [Page 38]
  2131.  
  2132. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2133.  
  2134.  
  2135.                   REFERENCE "10733 5.11 dataRetransmissionTimerExpiries"
  2136.                   ::= { x25CircuitEntry 14 }
  2137.  
  2138.           x25CircuitResetTimeouts OBJECT-TYPE
  2139.                   SYNTAX  Counter
  2140.                   ACCESS  read-only
  2141.                   STATUS  mandatory
  2142.                   DESCRIPTION
  2143.                           "The number of times the T22 reset timer
  2144.                           expired for this circuit."
  2145.                   REFERENCE "10733 5.11 resetTimeouts"
  2146.                   ::= { x25CircuitEntry 15 }
  2147.  
  2148.           x25CircuitInterruptTimeouts OBJECT-TYPE
  2149.                   SYNTAX  Counter
  2150.                   ACCESS  read-only
  2151.                   STATUS  mandatory
  2152.                   DESCRIPTION
  2153.                           "The number of times the T26 Interrupt timer
  2154.                           expired for this circuit."
  2155.                   REFERENCE "10733 interruptTimerExpiries"
  2156.                   ::= { x25CircuitEntry 16 }
  2157.  
  2158.           x25CircuitCallParamId OBJECT-TYPE
  2159.                   SYNTAX  OBJECT IDENTIFIER
  2160.                   ACCESS  read-write
  2161.                   STATUS  mandatory
  2162.                   DESCRIPTION
  2163.                           "This identifies the instance of the
  2164.                           x25CallParmIndex for the entry in the
  2165.                           x25CallParmTable which contains the call
  2166.                           parameters in use with this circuit.  The
  2167.                           entry referenced must contain the values
  2168.                           that are currently in use by the circuit
  2169.                           rather than proposed values.  A value of
  2170.                           NULL indicates the circuit is a PVC or is
  2171.                           using all the default parameters."
  2172.                   DEFVAL { {0 0} }
  2173.                   ::= { x25CircuitEntry 17 }
  2174.  
  2175.           x25CircuitCalledDteAddress OBJECT-TYPE
  2176.                   SYNTAX  X121Address
  2177.                   ACCESS  read-write
  2178.                   STATUS  mandatory
  2179.                   DESCRIPTION
  2180.                           "For incoming calls, this is the called
  2181.                           address from the call indication packet.
  2182.                           For outgoing calls, this is the called
  2183.  
  2184.  
  2185.  
  2186. Throop                                                         [Page 39]
  2187.  
  2188. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2189.  
  2190.  
  2191.                           address from the call confirmation packet.
  2192.                           This will be zero length for PVCs."
  2193.                   REFERENCE "10733 calledDTEAddress"
  2194.                   DEFVAL { ''h }
  2195.                   ::= { x25CircuitEntry 18 }
  2196.  
  2197.           x25CircuitCallingDteAddress OBJECT-TYPE
  2198.                   SYNTAX  X121Address
  2199.                   ACCESS  read-write
  2200.                   STATUS  mandatory
  2201.                   DESCRIPTION
  2202.                           "For incoming calls, this is the calling
  2203.                           address from the call indication packet.
  2204.                           For outgoing calls, this is the calling
  2205.                           address from the call confirmation packet.
  2206.                           This will be zero length for PVCs."
  2207.                   REFERENCE "10733 callingDTEAddress"
  2208.                   DEFVAL { ''h }
  2209.                   ::= { x25CircuitEntry 19 }
  2210.  
  2211.           x25CircuitOriginallyCalledAddress OBJECT-TYPE
  2212.                   SYNTAX  X121Address
  2213.                   ACCESS  read-write
  2214.                   STATUS  mandatory
  2215.                   DESCRIPTION
  2216.                           "For incoming calls, this is the address in
  2217.                           the call Redirection or Call Deflection
  2218.                           Notification facility if the call was
  2219.                           deflected or redirected, otherwise it will
  2220.                           be called address from the call indication
  2221.                           packet.  For outgoing calls, this is the
  2222.                           address from the call request packet.  This
  2223.                           will be zero length for PVCs."
  2224.                   REFERENCE "10733 originallyCalledAddress"
  2225.                   DEFVAL { ''h }
  2226.                   ::= { x25CircuitEntry 20 }
  2227.  
  2228.           x25CircuitDescr OBJECT-TYPE
  2229.                   SYNTAX  DisplayString (SIZE (0..255))
  2230.                   ACCESS  read-write
  2231.                   STATUS  mandatory
  2232.                   DESCRIPTION
  2233.                           "A descriptive string associated with this
  2234.                           circuit.  This provides a place for the
  2235.                           agent to supply any descriptive information
  2236.                           it knows about the use or owner of the
  2237.                           circuit.  The agent may return the process
  2238.                           identifier and user name for the process
  2239.  
  2240.  
  2241.  
  2242. Throop                                                         [Page 40]
  2243.  
  2244. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2245.  
  2246.  
  2247.                           using the circuit.  Alternative the agent
  2248.                           may return the name of the configuration
  2249.                           entry that caused a bridge to establish the
  2250.                           circuit.  A zero length value indicates the
  2251.                           agent doesn't have any additional
  2252.                           information."
  2253.                   DEFVAL { ''h }
  2254.                   ::= { x25CircuitEntry 21 }
  2255.  
  2256.  
  2257.  
  2258.           -- ###########################################################
  2259.           --              The Cleared Circuit Table
  2260.           -- ###########################################################
  2261.  
  2262.           x25ClearedCircuitEntriesRequested OBJECT-TYPE
  2263.                   SYNTAX  PositiveInteger
  2264.                   ACCESS  read-write
  2265.                   STATUS  mandatory
  2266.                   DESCRIPTION
  2267.                           "The requested number of entries for the
  2268.                           agent to keep in the x25ClearedCircuit
  2269.                           table."
  2270.                   ::= { x25 6 }
  2271.  
  2272.           x25ClearedCircuitEntriesGranted OBJECT-TYPE
  2273.                   SYNTAX  PositiveInteger
  2274.                   ACCESS  read-only
  2275.                   STATUS  mandatory
  2276.                   DESCRIPTION
  2277.                           "The actual number of entries the agent will
  2278.                           keep in the x25ClearedCircuit Table."
  2279.                   ::= { x25 7 }
  2280.  
  2281.           x25ClearedCircuitTable  OBJECT-TYPE
  2282.                   SYNTAX SEQUENCE OF      X25ClearedCircuitEntry
  2283.                   ACCESS not-accessible
  2284.                   STATUS  mandatory
  2285.                   DESCRIPTION
  2286.                           "A table of entries about closed circuits.
  2287.                           Entries must be made in this table whenever
  2288.                           circuits are closed and the close request or
  2289.                           close indication packet contains a clearing
  2290.                           cause other than DTE Originated or a
  2291.                           Diagnostic code field other than Higher
  2292.                           Layer Initiated disconnection-normal.  An
  2293.                           agent may optionally make entries for normal
  2294.                           closes (to record closing facilities or
  2295.  
  2296.  
  2297.  
  2298. Throop                                                         [Page 41]
  2299.  
  2300. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2301.  
  2302.  
  2303.                           other information).
  2304.  
  2305.                           Agents will delete the oldest entry in the
  2306.                           table when adding a new entry would exceed
  2307.                           agent resources.  Agents are required to
  2308.                           keep the last entry put in the table and may
  2309.                           keep more entries.  The object
  2310.                           x25OperClearEntriesGranted returns the
  2311.                           maximum number of entries kept in the
  2312.                           table."
  2313.                   REFERENCE "See ISO 8208 Section 12.2.3.1.1
  2314.                                   and 12.2.3.1.2"
  2315.                   ::= { x25 8 }
  2316.  
  2317.           x25ClearedCircuitEntry  OBJECT-TYPE
  2318.                   SYNTAX  X25ClearedCircuitEntry
  2319.                   ACCESS  not-accessible
  2320.                   STATUS  mandatory
  2321.                   DESCRIPTION
  2322.                           "Information about a cleared circuit."
  2323.                   INDEX { x25ClearedCircuitIndex }
  2324.                   ::= { x25ClearedCircuitTable 1 }
  2325.  
  2326.           X25ClearedCircuitEntry ::= SEQUENCE {
  2327.                   x25ClearedCircuitIndex
  2328.                           PositiveInteger,
  2329.                   x25ClearedCircuitPleIndex
  2330.                           IfIndexType,
  2331.                   x25ClearedCircuitTimeEstablished
  2332.                           TimeTicks,
  2333.                   x25ClearedCircuitTimeCleared
  2334.                           TimeTicks,
  2335.                   x25ClearedCircuitChannel
  2336.                           INTEGER,
  2337.                   x25ClearedCircuitClearingCause
  2338.                           INTEGER,
  2339.                   x25ClearedCircuitDiagnosticCode
  2340.                           INTEGER,
  2341.                   x25ClearedCircuitInPdus
  2342.                           Counter,
  2343.                   x25ClearedCircuitOutPdus
  2344.                           Counter,
  2345.                   x25ClearedCircuitCalledAddress
  2346.                           X121Address,
  2347.                   x25ClearedCircuitCallingAddress
  2348.                           X121Address,
  2349.                   x25ClearedCircuitClearFacilities
  2350.                           OCTET STRING
  2351.  
  2352.  
  2353.  
  2354. Throop                                                         [Page 42]
  2355.  
  2356. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2357.  
  2358.  
  2359.                   }
  2360.  
  2361.           x25ClearedCircuitIndex OBJECT-TYPE
  2362.                   SYNTAX  PositiveInteger
  2363.                   ACCESS  read-only
  2364.                   STATUS  mandatory
  2365.                   DESCRIPTION
  2366.                           "An index that uniquely distinguishes one
  2367.                           entry in the clearedCircuitTable from
  2368.                           another.  This index will start at
  2369.                           2147483647 and will decrease by one for each
  2370.                           new entry added to the table.  Upon reaching
  2371.                           one, the index will reset to 2147483647.
  2372.                           Because the index starts at 2147483647 and
  2373.                           decreases, a manager may do a getnext on
  2374.                           entry zero and obtain the most recent entry.
  2375.                           When the index has the value of 1, the next
  2376.                           entry will delete all entries in the table
  2377.                           and that entry will be numbered 2147483647."
  2378.                   ::= { x25ClearedCircuitEntry 1 }
  2379.  
  2380.           x25ClearedCircuitPleIndex OBJECT-TYPE
  2381.                   SYNTAX  IfIndexType
  2382.                   ACCESS  read-only
  2383.                   STATUS  mandatory
  2384.                   DESCRIPTION
  2385.                           "The value of ifIndex for the PLE which
  2386.                           cleared the circuit that created the entry."
  2387.                   ::= { x25ClearedCircuitEntry 2 }
  2388.  
  2389.           x25ClearedCircuitTimeEstablished OBJECT-TYPE
  2390.                   SYNTAX  TimeTicks
  2391.                   ACCESS  read-only
  2392.                   STATUS  mandatory
  2393.                   DESCRIPTION
  2394.                           "The value of sysUpTime when the circuit was
  2395.                           established.  This will be the same value
  2396.                           that was in the x25CircuitEstablishTime for
  2397.                           the circuit."
  2398.                   ::= { x25ClearedCircuitEntry 3 }
  2399.  
  2400.           x25ClearedCircuitTimeCleared OBJECT-TYPE
  2401.                   SYNTAX  TimeTicks
  2402.                   ACCESS  read-only
  2403.                   STATUS  mandatory
  2404.                   DESCRIPTION
  2405.                           "The value of sysUpTime when the circuit was
  2406.                           cleared.  For locally initiated clears, this
  2407.  
  2408.  
  2409.  
  2410. Throop                                                         [Page 43]
  2411.  
  2412. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2413.  
  2414.  
  2415.                           will be the time when the clear confirmation
  2416.                           was received.  For remotely initiated
  2417.                           clears, this will be the time when the clear
  2418.                           indication was received."
  2419.                   ::= { x25ClearedCircuitEntry 4 }
  2420.  
  2421.           x25ClearedCircuitChannel OBJECT-TYPE
  2422.                   SYNTAX  INTEGER (0..4095)
  2423.                   ACCESS  read-only
  2424.                   STATUS  mandatory
  2425.                   DESCRIPTION
  2426.                           "The channel number for the circuit that was
  2427.                           cleared."
  2428.                   ::= { x25ClearedCircuitEntry 5 }
  2429.  
  2430.           x25ClearedCircuitClearingCause OBJECT-TYPE
  2431.                   SYNTAX  INTEGER (0..255)
  2432.                   ACCESS  read-only
  2433.                   STATUS  mandatory
  2434.                   DESCRIPTION
  2435.                           "The Clearing Cause from the clear request
  2436.                           or clear indication packet that cleared the
  2437.                           circuit."
  2438.                   REFERENCE "See ISO 8208 Section 12.2.3.1.1"
  2439.                   ::= { x25ClearedCircuitEntry 6 }
  2440.  
  2441.           x25ClearedCircuitDiagnosticCode OBJECT-TYPE
  2442.                   SYNTAX  INTEGER (0..255)
  2443.                   ACCESS  read-only
  2444.                   STATUS  mandatory
  2445.                   DESCRIPTION
  2446.                           "The Diagnostic Code from the clear request
  2447.                           or clear indication packet that cleared the
  2448.                           circuit."
  2449.                   REFERENCE "See ISO 8208 Section 12.2.3.1.2"
  2450.                   ::= { x25ClearedCircuitEntry 7 }
  2451.  
  2452.           x25ClearedCircuitInPdus OBJECT-TYPE
  2453.                   SYNTAX  Counter
  2454.                   ACCESS  read-only
  2455.                   STATUS  mandatory
  2456.                   DESCRIPTION
  2457.                           "The number of PDUs received on the
  2458.                           circuit."
  2459.                   ::= { x25ClearedCircuitEntry 8 }
  2460.  
  2461.           x25ClearedCircuitOutPdus OBJECT-TYPE
  2462.                   SYNTAX  Counter
  2463.  
  2464.  
  2465.  
  2466. Throop                                                         [Page 44]
  2467.  
  2468. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2469.  
  2470.  
  2471.                   ACCESS  read-only
  2472.                   STATUS  mandatory
  2473.                   DESCRIPTION
  2474.                           "The number of PDUs transmitted on the
  2475.                           circuit."
  2476.                   ::= { x25ClearedCircuitEntry 9 }
  2477.  
  2478.           x25ClearedCircuitCalledAddress OBJECT-TYPE
  2479.                   SYNTAX  X121Address
  2480.                   ACCESS  read-only
  2481.                   STATUS  mandatory
  2482.                   DESCRIPTION
  2483.                           "The called address from the cleared
  2484.                           circuit."
  2485.                   ::= { x25ClearedCircuitEntry 10 }
  2486.  
  2487.           x25ClearedCircuitCallingAddress OBJECT-TYPE
  2488.                   SYNTAX  X121Address
  2489.                   ACCESS  read-only
  2490.                   STATUS  mandatory
  2491.                   DESCRIPTION
  2492.                           "The calling address from the cleared
  2493.                           circuit."
  2494.                   ::= { x25ClearedCircuitEntry 11 }
  2495.  
  2496.           x25ClearedCircuitClearFacilities OBJECT-TYPE
  2497.                   SYNTAX  OCTET STRING (SIZE (0..109))
  2498.                   ACCESS  read-only
  2499.                   STATUS  mandatory
  2500.                   DESCRIPTION
  2501.                           "The facilities field from the clear request
  2502.                           or clear indication packet that cleared the
  2503.                           circuit.  A size of zero indicates no
  2504.                           facilities were present."
  2505.                   ::= { x25ClearedCircuitEntry 12 }
  2506.  
  2507.  
  2508.  
  2509.  
  2510.           -- ###########################################################
  2511.           --                The Call Parameter Table
  2512.           -- ###########################################################
  2513.  
  2514.           x25CallParmTable OBJECT-TYPE
  2515.                   SYNTAX  SEQUENCE OF X25CallParmEntry
  2516.                   ACCESS  not-accessible
  2517.                   STATUS  mandatory
  2518.                   DESCRIPTION
  2519.  
  2520.  
  2521.  
  2522. Throop                                                         [Page 45]
  2523.  
  2524. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2525.  
  2526.  
  2527.                           "These objects contain the parameters that
  2528.                           can be varied between X.25 calls.  The
  2529.                           entries in this table are independent of the
  2530.                           PLE.  There exists only one of these tables
  2531.                           for the entire system.  The indexes for the
  2532.                           entries are independent of any PLE or any
  2533.                           circuit.  Other tables reference entries in
  2534.                           this table.  Entries in this table can be
  2535.                           used for default PLE parameters, for
  2536.                           parameters to use to place/answer a call,
  2537.                           for the parameters currently in use for a
  2538.                           circuit, or parameters that were used by a
  2539.                           circuit.
  2540.  
  2541.                           The number of references to a given set of
  2542.                           parameters can be found in the
  2543.                           x25CallParmRefCount object sharing the same
  2544.                           instance identifier with the parameters.
  2545.                           The value of this reference count also
  2546.                           affects the access of the objects in this
  2547.                           table.  An object in this table with the
  2548.                           same instance identifier as the instance
  2549.                           identifier of an x25CallParmRefCount must be
  2550.                           consider associated with that reference
  2551.                           count.  An object with an associated
  2552.                           reference count of zero can be written (if
  2553.                           its ACCESS clause allows it).  An object
  2554.                           with an associated reference count greater
  2555.                           than zero can not be written (regardless of
  2556.                           the ACCESS clause).  This ensures that a set
  2557.                           of call parameters being referenced from
  2558.                           another table can not be modified or changed
  2559.                           in a ways inappropriate for continued use by
  2560.                           that table."
  2561.                   ::= { x25 9 }
  2562.  
  2563.           x25CallParmEntry OBJECT-TYPE
  2564.                   SYNTAX  X25CallParmEntry
  2565.                   ACCESS  not-accessible
  2566.                   STATUS  mandatory
  2567.                   DESCRIPTION
  2568.                           "Entries of x25CallParmTable."
  2569.                   INDEX { x25CallParmIndex }
  2570.                   ::= { x25CallParmTable 1 }
  2571.  
  2572.           X25CallParmEntry ::= SEQUENCE {
  2573.                   x25CallParmIndex
  2574.                           PositiveInteger,
  2575.  
  2576.  
  2577.  
  2578. Throop                                                         [Page 46]
  2579.  
  2580. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2581.  
  2582.  
  2583.                   x25CallParmStatus
  2584.                           EntryStatus,
  2585.                   x25CallParmRefCount
  2586.                           PositiveInteger,
  2587.                   x25CallParmInPacketSize
  2588.                           INTEGER,
  2589.                   x25CallParmOutPacketSize
  2590.                           INTEGER,
  2591.                   x25CallParmInWindowSize
  2592.                           INTEGER,
  2593.                   x25CallParmOutWindowSize
  2594.                           INTEGER,
  2595.                   x25CallParmAcceptReverseCharging
  2596.                           INTEGER,
  2597.                   x25CallParmProposeReverseCharging
  2598.                           INTEGER,
  2599.                   x25CallParmFastSelect
  2600.                           INTEGER,
  2601.                   x25CallParmInThruPutClasSize
  2602.                           INTEGER,
  2603.                   x25CallParmOutThruPutClasSize
  2604.                           INTEGER,
  2605.                   x25CallParmCug
  2606.                           DisplayString,
  2607.                   x25CallParmCugoa
  2608.                           DisplayString,
  2609.                   x25CallParmBcug
  2610.                           DisplayString,
  2611.                   x25CallParmNui
  2612.                           OCTET STRING,
  2613.                   x25CallParmChargingInfo
  2614.                           INTEGER,
  2615.                   x25CallParmRpoa
  2616.                           DisplayString,
  2617.                   x25CallParmTrnstDly
  2618.                           INTEGER,
  2619.                   x25CallParmCallingExt
  2620.                           DisplayString,
  2621.                   x25CallParmCalledExt
  2622.                           DisplayString,
  2623.                   x25CallParmInMinThuPutCls
  2624.                           INTEGER,
  2625.                   x25CallParmOutMinThuPutCls
  2626.                           INTEGER,
  2627.                   x25CallParmEndTrnsDly
  2628.                           OCTET STRING,
  2629.                   x25CallParmPriority
  2630.                           OCTET STRING,
  2631.  
  2632.  
  2633.  
  2634. Throop                                                         [Page 47]
  2635.  
  2636. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2637.  
  2638.  
  2639.                   x25CallParmProtection
  2640.                           DisplayString,
  2641.                   x25CallParmExptData
  2642.                           INTEGER,
  2643.                   x25CallParmUserData
  2644.                           OCTET STRING,
  2645.                   x25CallParmCallingNetworkFacilities
  2646.                           OCTET STRING,
  2647.                   x25CallParmCalledNetworkFacilities
  2648.                           OCTET STRING
  2649.                   }
  2650.  
  2651.           x25CallParmIndex OBJECT-TYPE
  2652.                   SYNTAX  PositiveInteger
  2653.                   ACCESS  read-only
  2654.                   STATUS  mandatory
  2655.                   DESCRIPTION
  2656.                           "A value that distinguishes this entry from
  2657.                           another entry.  Entries in this table are
  2658.                           referenced from other objects which identify
  2659.                           call parameters.
  2660.  
  2661.                           It is impossible to know which other objects
  2662.                           in the MIB reference entries in the table by
  2663.                           looking at this table.  Because of this,
  2664.                           changes to parameters must be accomplished
  2665.                           by creating a new entry in this table and
  2666.                           then changing the referencing table to
  2667.                           identify the new entry.
  2668.  
  2669.                           Note that an agent will only use the values
  2670.                           in this table when another table is changed
  2671.                           to reference those values.  The number of
  2672.                           other tables that reference an index object
  2673.                           in this table can be found in
  2674.                           x25CallParmRefCount.  The value of the
  2675.                           reference count will affect the writability
  2676.                           of the objects as explained above.
  2677.  
  2678.                           Entries in this table which have a reference
  2679.                           count of zero maybe deleted at the convence
  2680.                           of the agent.  Care should be taken by the
  2681.                           agent to give the NMS sufficient time to
  2682.                           create a reference to newly created entries.
  2683.  
  2684.                           Should a Management Station not find a free
  2685.                           index with which to create a new entry, it
  2686.                           may feel free to delete entries with a
  2687.  
  2688.  
  2689.  
  2690. Throop                                                         [Page 48]
  2691.  
  2692. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2693.  
  2694.  
  2695.                           reference count of zero.  However in doing
  2696.                           so the Management Station much realize it
  2697.                           may impact other Management Stations."
  2698.                   ::= { x25CallParmEntry 1 }
  2699.  
  2700.           x25CallParmStatus OBJECT-TYPE
  2701.                   SYNTAX  EntryStatus
  2702.                   ACCESS  read-write
  2703.                   STATUS  mandatory
  2704.                   DESCRIPTION
  2705.                           "The status of this call parameter entry.
  2706.                           See RFC 1271 for details of usage."
  2707.                   ::= { x25CallParmEntry 2 }
  2708.  
  2709.           x25CallParmRefCount OBJECT-TYPE
  2710.                   SYNTAX  PositiveInteger
  2711.                   ACCESS  read-only
  2712.                   STATUS  mandatory
  2713.                   DESCRIPTION
  2714.                           "The number of references know by a
  2715.                           management station to exist to this set of
  2716.                           call parameters.  This is the number of
  2717.                           other objects that have returned a value of,
  2718.                           and will return a value of, the index for
  2719.                           this set of call parameters.  Examples of
  2720.                           such objects are the x25AdmnDefCallParamId,
  2721.                           x25OperDataLinkId, or x25AdmnDefCallParamId
  2722.                           objects defined above."
  2723.                   ::= { x25CallParmEntry 3 }
  2724.  
  2725.           x25CallParmInPacketSize OBJECT-TYPE
  2726.                   SYNTAX  INTEGER (0..4096)
  2727.                   ACCESS  read-write
  2728.                   STATUS  mandatory
  2729.                   DESCRIPTION
  2730.                           "The maximum receive packet size in octets
  2731.                           for a circuit.  A size of zero for a circuit
  2732.                           means use the PLE default size.  A size of
  2733.                           zero for the PLE means use a default size of
  2734.                           128."
  2735.                   REFERENCE "10733 proposedPacketSize;
  2736.                           See ISO 8208 Section 15.2.2.1.1"
  2737.                   DEFVAL { 128 }
  2738.                   ::= { x25CallParmEntry 4 }
  2739.  
  2740.           x25CallParmOutPacketSize OBJECT-TYPE
  2741.                   SYNTAX  INTEGER (0..4096)
  2742.                   ACCESS  read-write
  2743.  
  2744.  
  2745.  
  2746. Throop                                                         [Page 49]
  2747.  
  2748. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2749.  
  2750.  
  2751.                   STATUS  mandatory
  2752.                   DESCRIPTION
  2753.                           "The maximum transmit packet size in octets
  2754.                           for a circuit.  A size of zero for a circuit
  2755.                           means use the PLE default size.  A size of
  2756.                           zero for the PLE default means use a default
  2757.                           size of 128."
  2758.                   REFERENCE "10733 proposedPacketSize;
  2759.                           See ISO 8208 Section 15.2.2.1.1"
  2760.                   DEFVAL { 128 }
  2761.                   ::= { x25CallParmEntry 5 }
  2762.  
  2763.           x25CallParmInWindowSize OBJECT-TYPE
  2764.                   SYNTAX  INTEGER (0..127)
  2765.                   ACCESS  read-write
  2766.                   STATUS  mandatory
  2767.                   DESCRIPTION
  2768.                           "The receive window size for a circuit.  A
  2769.                           size of zero for a circuit means use the PLE
  2770.                           default size.  A size of zero for the PLE
  2771.                           default means use 2."
  2772.                   REFERENCE "10733 proposedWindowSize;
  2773.                           See ISO 8208 Section 15.2.2.1.2"
  2774.                   DEFVAL { 2 }
  2775.                   ::= { x25CallParmEntry 6 }
  2776.  
  2777.           x25CallParmOutWindowSize OBJECT-TYPE
  2778.                   SYNTAX  INTEGER (0..127)
  2779.                   ACCESS  read-write
  2780.                   STATUS  mandatory
  2781.                   DESCRIPTION
  2782.                           "The transmit window size for a circuit.  A
  2783.                           size of zero for a circuit means use the PLE
  2784.                           default size.  A size of zero for the PLE
  2785.                           default means use 2."
  2786.                   REFERENCE "10733 proposedWindowSize;
  2787.                           See ISO 8208 Section 15.2.2.1.2"
  2788.                   DEFVAL { 2 }
  2789.                   ::= { x25CallParmEntry 7 }
  2790.  
  2791.           x25CallParmAcceptReverseCharging OBJECT-TYPE
  2792.                   SYNTAX  INTEGER {
  2793.                                   default (1),
  2794.                                   accept (2),
  2795.                                   refuse (3),
  2796.                                   neverAccept (4)
  2797.                           }
  2798.                   ACCESS  read-write
  2799.  
  2800.  
  2801.  
  2802. Throop                                                         [Page 50]
  2803.  
  2804. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2805.  
  2806.  
  2807.                   STATUS  mandatory
  2808.                   DESCRIPTION
  2809.                           "An enumeration defining if the PLE will
  2810.                           accept or refuse charges.  A value of
  2811.                           default for a circuit means use the PLE
  2812.                           default value.  A value of neverAccept is
  2813.                           only used for the PLE default and indicates
  2814.                           the PLE will never accept reverse charging.
  2815.                           A value of default for a PLE default means
  2816.                           refuse."
  2817.                   REFERENCE "10733 acceptReverseCharging"
  2818.                   DEFVAL { refuse }
  2819.                   ::= { x25CallParmEntry 8 }
  2820.  
  2821.           x25CallParmProposeReverseCharging OBJECT-TYPE
  2822.                   SYNTAX  INTEGER {
  2823.                                   default (1),
  2824.                                   reverse (2),
  2825.                                   local (3)
  2826.                           }
  2827.                   ACCESS  read-write
  2828.                   STATUS  mandatory
  2829.                   DESCRIPTION
  2830.                           "An enumeration defining if the PLE should
  2831.                           propose reverse or local charging.  The
  2832.                           value of default for a circuit means use the
  2833.                           PLE default.  The value of default for the
  2834.                           PLE default means use local."
  2835.                   REFERENCE "10733 proposedPacketSize;
  2836.                           See ISO 8208 Section 15.2.2.6"
  2837.                   DEFVAL { local }
  2838.                   ::= { x25CallParmEntry 9 }
  2839.  
  2840.           x25CallParmFastSelect OBJECT-TYPE
  2841.                   SYNTAX  INTEGER {
  2842.                                   default (1),
  2843.                                   notSpecified (2),
  2844.                                   fastSelect (3),
  2845.                                   restrictedFastResponse (4),
  2846.                                   noFastSelect (5),
  2847.                                   noRestrictedFastResponse (6)
  2848.                           }
  2849.                   ACCESS  read-write
  2850.                   STATUS  mandatory
  2851.                   DESCRIPTION
  2852.                           "Expresses preference for use of fast select
  2853.                           facility.  The value of default for a
  2854.                           circuit is the PLE default.  A value of
  2855.  
  2856.  
  2857.  
  2858. Throop                                                         [Page 51]
  2859.  
  2860. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2861.  
  2862.  
  2863.                           default for the PLE means noFastSelect.  A
  2864.                           value of noFastSelect or
  2865.                           noRestrictedFastResponse indicates a circuit
  2866.                           may not use fast select or restricted fast
  2867.                           response."
  2868.                   REFERENCE "10733 fastSelect;
  2869.                   Sec ISO 8208 Section 15.2.2.6"
  2870.                   DEFVAL { noFastSelect }
  2871.                   ::= { x25CallParmEntry 10 }
  2872.  
  2873.           x25CallParmInThruPutClasSize    OBJECT-TYPE
  2874.                   SYNTAX  INTEGER {
  2875.                                   tcReserved1 (1),
  2876.                                   tcReserved2 (2),
  2877.                                   tc75 (3),
  2878.                                   tc150 (4),
  2879.                                   tc300 (5),
  2880.                                   tc600 (6),
  2881.                                   tc1200  (7),
  2882.                                   tc2400  (8),
  2883.                                   tc4800  (9),
  2884.                                   tc9600  (10),
  2885.                                   tc19200 (11),
  2886.                                   tc48000 (12),
  2887.                                   tc64000 (13),
  2888.                                   tcReserved14 (14),
  2889.                                   tcReserved15 (15),
  2890.                                   tcReserved0 (16),
  2891.                                   tcNone  (17),
  2892.                                   tcDefault (18)
  2893.                           }
  2894.                   ACCESS  read-write
  2895.                   STATUS  mandatory
  2896.                   DESCRIPTION
  2897.                           "The incoming throughput class to negotiate.
  2898.                           A value of tcDefault for a circuit means use
  2899.                           the PLE default.  A value of tcDefault for
  2900.                           the PLE default means tcNone.  A value of
  2901.                           tcNone means do not negotiate throughtput
  2902.                           class."
  2903.                   REFERENCE "See ISO 8208 Section 15.2.2.2, table 18"
  2904.                   DEFVAL { tcNone }
  2905.                   ::= { x25CallParmEntry 11 }
  2906.  
  2907.           x25CallParmOutThruPutClasSize   OBJECT-TYPE
  2908.                   SYNTAX  INTEGER {
  2909.                                   tcReserved1 (1),
  2910.                                   tcReserved2 (2),
  2911.  
  2912.  
  2913.  
  2914. Throop                                                         [Page 52]
  2915.  
  2916. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2917.  
  2918.  
  2919.                                   tc75 (3),
  2920.                                   tc150 (4),
  2921.                                   tc300 (5),
  2922.                           tc600 (6),
  2923.                                   tc1200  (7),
  2924.                                   tc2400  (8),
  2925.                                   tc4800  (9),
  2926.                                   tc9600  (10),
  2927.                                   tc19200 (11),
  2928.                                   tc48000 (12),
  2929.                                   tc64000 (13),
  2930.                                   tcReserved14 (14),
  2931.                                   tcReserved15 (15),
  2932.                                   tcReserved0 (16),
  2933.                                   tcNone  (17),
  2934.                                   tcDefault (18)
  2935.                           }
  2936.                   ACCESS  read-write
  2937.                   STATUS  mandatory
  2938.                   DESCRIPTION
  2939.                           "The outgoing throughput class to negotiate.
  2940.                           A value of tcDefault for a circuit means use
  2941.                           the PLE default.  A value of tcDefault for
  2942.                           the PLE default means use tcNone.  A value
  2943.                           of tcNone means do not negotiate throughtput
  2944.                           class."
  2945.                   REFERENCE "See ISO 8208 Section 15.2.2.2, table 18"
  2946.                   DEFVAL { tcNone }
  2947.                   ::= { x25CallParmEntry 12 }
  2948.  
  2949.           x25CallParmCug  OBJECT-TYPE
  2950.                   SYNTAX  DisplayString (SIZE(0..4))
  2951.                   ACCESS  read-write
  2952.                   STATUS  mandatory
  2953.                   DESCRIPTION
  2954.                           "The Closed User Group to specify.  This
  2955.                           consists of two or four octets containing
  2956.                           the characters 0 through 9.  A zero length
  2957.                           string indicates no facility requested.  A
  2958.                           string length of three containing the
  2959.                           characters DEF for a circuit means use the
  2960.                           PLE default, (the PLE default parameter may
  2961.                           not reference an entry of DEF.)"
  2962.                   REFERENCE "See ISO 8208 Section 15.2.2.3"
  2963.                   DEFVAL { ''h }
  2964.                   ::= { x25CallParmEntry 13 }
  2965.  
  2966.           x25CallParmCugoa        OBJECT-TYPE
  2967.  
  2968.  
  2969.  
  2970. Throop                                                         [Page 53]
  2971.  
  2972. RFC 1382                 X.25 Packet Layer MIB             November 1992
  2973.  
  2974.  
  2975.                   SYNTAX  DisplayString (SIZE(0..4))
  2976.                   ACCESS  read-write
  2977.                   STATUS  mandatory
  2978.                   DESCRIPTION
  2979.                           "The Closed User Group with Outgoing Access
  2980.                           to specify.  This consists of two or four
  2981.                           octets containing the characters 0 through
  2982.                           9.  A string length of three containing the
  2983.                           characters DEF for a circuit means use the
  2984.                           PLE default (the PLE default parameters may
  2985.                           not reference an entry of DEF).  A zero
  2986.                           length string indicates no facility
  2987.                           requested."
  2988.                   REFERENCE "See ISO 8208 Section 15.2.2.4"
  2989.                   DEFVAL { ''h }
  2990.                   ::= { x25CallParmEntry 14 }
  2991.  
  2992.           x25CallParmBcug OBJECT-TYPE
  2993.                   SYNTAX  DisplayString (SIZE(0..3))
  2994.                   ACCESS  read-write
  2995.                   STATUS  mandatory
  2996.                   DESCRIPTION
  2997.                           "The Bilateral Closed User Group to specify.
  2998.                           This consists of two octets containing the
  2999.                           characters 0 through 9.  A string length of
  3000.                           three containing the characters DEF for a
  3001.                           circuit means use the PLE default (the PLE
  3002.                           default parameter may not reference an entry
  3003.                           of DEF).  A zero length string indicates no
  3004.                           facility requested."
  3005.                   REFERENCE "See ISO 8208 Section 15.2.2.5"
  3006.                   DEFVAL { ''h }
  3007.                   ::= { x25CallParmEntry 15 }
  3008.  
  3009.           x25CallParmNui  OBJECT-TYPE
  3010.                   SYNTAX  OCTET STRING (SIZE(0..108))
  3011.                   ACCESS  read-write
  3012.                   STATUS  mandatory
  3013.                   DESCRIPTION
  3014.                           "The Network User Identifier facility.  This
  3015.                           is binary value to be included immediately
  3016.                           after the length field.  The PLE will supply
  3017.                           the length octet.  A zero length string
  3018.                           indicates no facility requested.  This value
  3019.                           is ignored for the PLE default parameters
  3020.                           entry."
  3021.                   REFERENCE "See ISO 8208 Section 15.2.2.7"
  3022.                   DEFVAL { ''h }
  3023.  
  3024.  
  3025.  
  3026. Throop                                                         [Page 54]
  3027.  
  3028. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3029.  
  3030.  
  3031.                   ::= { x25CallParmEntry 16 }
  3032.  
  3033.           x25CallParmChargingInfo OBJECT-TYPE
  3034.                   SYNTAX INTEGER {
  3035.                                   default (1),
  3036.                                   noFacility (2),
  3037.                                   noChargingInfo (3),
  3038.                                   chargingInfo (4)
  3039.                           }
  3040.                   ACCESS  read-write
  3041.                   STATUS  mandatory
  3042.                   DESCRIPTION
  3043.                           "The charging Information facility.  A value
  3044.                           of default for a circuit means use the PLE
  3045.                           default.  The value of default for the
  3046.                           default PLE parameters means use noFacility.
  3047.                           The value of noFacility means do not include
  3048.                           a facility."
  3049.                   REFERENCE "See ISO 8208 Section 15.2.2.8"
  3050.                   DEFVAL { noFacility }
  3051.                   ::= { x25CallParmEntry 17 }
  3052.  
  3053.           x25CallParmRpoa OBJECT-TYPE
  3054.                   SYNTAX  DisplayString (SIZE(0..108))
  3055.                   ACCESS  read-write
  3056.                   STATUS  mandatory
  3057.                   DESCRIPTION
  3058.                           "The RPOA facility.  The octet string
  3059.                           contains n * 4 sequences of the characters
  3060.                           0-9 to specify a facility with n entries.
  3061.                           The octet string containing the 3 characters
  3062.                           DEF for a circuit specifies use of the PLE
  3063.                           default (the entry for the PLE default may
  3064.                           not contain DEF).  A zero length string
  3065.                           indicates no facility requested."
  3066.                   REFERENCE "See ISO 8208, section 15.2.2.9"
  3067.                   DEFVAL { ''h }
  3068.                   ::= { x25CallParmEntry 18 }
  3069.  
  3070.           x25CallParmTrnstDly     OBJECT-TYPE
  3071.                   SYNTAX  INTEGER (0..65537)
  3072.                   ACCESS  read-write
  3073.                   STATUS  mandatory
  3074.                   DESCRIPTION
  3075.                           "The Transit Delay Selection and Indication
  3076.                           value.  A value of 65536 indicates no
  3077.                           facility requested.  A value of 65537 for a
  3078.                           circuit means use the PLE default (the PLE
  3079.  
  3080.  
  3081.  
  3082. Throop                                                         [Page 55]
  3083.  
  3084. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3085.  
  3086.  
  3087.                           default parameters entry may not use the
  3088.                           value 65537).  The value 65535 may only be
  3089.                           used to indicate the value in use by a
  3090.                           circuit."
  3091.                   REFERENCE "See ISO 8208, Section 15.2.2.13"
  3092.                   DEFVAL { 65536 }
  3093.                   ::= { x25CallParmEntry 19 }
  3094.  
  3095.  
  3096.                   -- The following parameters are for CCITT facilities.
  3097.  
  3098.           x25CallParmCallingExt OBJECT-TYPE
  3099.                   SYNTAX  DisplayString (SIZE(0..40))
  3100.                   ACCESS  read-write
  3101.                   STATUS  mandatory
  3102.                   DESCRIPTION
  3103.                           "The Calling Extension facility.  This
  3104.                           contains one of the following:
  3105.  
  3106.                           A sequence of hex digits with the value to
  3107.                           be put in the facility. These digits will be
  3108.                           converted to binary by the agent and put in
  3109.                           the facility.  These octets do not include
  3110.                           the length octet.
  3111.  
  3112.                           A value containing the three character DEF
  3113.                           for a circuit means use the PLE default,
  3114.                           (the entry for the PLE default parameters
  3115.                           may not use the value DEF).
  3116.  
  3117.                           A zero length string indicates no facility
  3118.                           requested."
  3119.                   REFERENCE "See ISO 8208 Section 15.3.2.1"
  3120.                   DEFVAL { ''h }
  3121.                   ::= { x25CallParmEntry 20 }
  3122.  
  3123.           x25CallParmCalledExt OBJECT-TYPE
  3124.                   SYNTAX  DisplayString (SIZE(0..40))
  3125.                   ACCESS  read-write
  3126.                   STATUS  mandatory
  3127.                   DESCRIPTION
  3128.                           "The Called Extension facility.  This
  3129.                           contains one of the following:
  3130.  
  3131.                           A sequence of hex digits with the value to
  3132.                           be put in the facility.  These digits will be
  3133.                           converted to binary by the agent and put in
  3134.                           the facility.  These octets do not include
  3135.  
  3136.  
  3137.  
  3138. Throop                                                         [Page 56]
  3139.  
  3140. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3141.  
  3142.  
  3143.                           the length octet.
  3144.  
  3145.                           A value containing the three character DEF
  3146.                           for a circuit means use the PLE default,
  3147.                           (the entry for the PLE default parameters
  3148.                           may not use the value DEF).
  3149.  
  3150.                           A zero length string indicates no facility
  3151.                           requested."
  3152.                   REFERENCE "See ISO 8208 Section 15.3.2.2"
  3153.                   DEFVAL { ''h }
  3154.                   ::= { x25CallParmEntry 21 }
  3155.  
  3156.           x25CallParmInMinThuPutCls       OBJECT-TYPE
  3157.                   SYNTAX  INTEGER (0..17)
  3158.                   ACCESS  read-write
  3159.                   STATUS  mandatory
  3160.                   DESCRIPTION
  3161.                           "The minimum input throughput Class.  A
  3162.                           value of 16 for a circuit means use the PLE
  3163.                           default (the PLE parameters entry may not
  3164.                           use this value).  A value of 17 indicates no
  3165.                           facility requested."
  3166.                   REFERENCE "See ISO 8208 Section 15.3.2.3"
  3167.                   DEFVAL { 17 }
  3168.                   ::= { x25CallParmEntry 22 }
  3169.  
  3170.           x25CallParmOutMinThuPutCls OBJECT-TYPE
  3171.                   SYNTAX  INTEGER (0..17)
  3172.                   ACCESS  read-write
  3173.                   STATUS  mandatory
  3174.                   DESCRIPTION
  3175.                           "The minimum output throughput Class.  A
  3176.                           value of 16 for a circuit means use the PLE
  3177.                           default (the PLE parameters entry may not
  3178.                           use this value).  A value of 17 indicates no
  3179.                           facility requested."
  3180.                   REFERENCE "See ISO 8208 Section 15.3.2.3"
  3181.                   DEFVAL { 17 }
  3182.                   ::= { x25CallParmEntry 23 }
  3183.  
  3184.           x25CallParmEndTrnsDly OBJECT-TYPE
  3185.                   SYNTAX  OCTET STRING (SIZE(0..6))
  3186.                   ACCESS  read-write
  3187.                   STATUS  mandatory
  3188.                   DESCRIPTION
  3189.                           "The End-to-End Transit Delay to negotiate.
  3190.                           An octet string of length 2, 4, or 6
  3191.  
  3192.  
  3193.  
  3194. Throop                                                         [Page 57]
  3195.  
  3196. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3197.  
  3198.  
  3199.                           contains the facility encoded as specified
  3200.                           in ISO/IEC 8208 section 15.3.2.4.  An octet
  3201.                           string of length 3 containing the three
  3202.                           character DEF for a circuit means use the
  3203.                           PLE default (the entry for the PLE default
  3204.                           can not contain the characters DEF).  A zero
  3205.                           length string indicates no facility
  3206.                           requested."
  3207.                   REFERENCE "See ISO 8208 Section 15.3.2.4"
  3208.                   DEFVAL { ''h }
  3209.                   ::= { x25CallParmEntry 24 }
  3210.  
  3211.           x25CallParmPriority OBJECT-TYPE
  3212.                   SYNTAX  OCTET STRING (SIZE(0..6))
  3213.                   ACCESS  read-write
  3214.                   STATUS  mandatory
  3215.                   DESCRIPTION
  3216.                           "The priority facility to negotiate.  The
  3217.                           octet string encoded as specified in ISO/IEC
  3218.                           8208 section 15.3.2.5.  A zero length string
  3219.                           indicates no facility requested.  The entry
  3220.                           for the PLE default parameters must be zero
  3221.                           length."
  3222.                   REFERENCE "See ISO 8208 Section 15.3.2.5"
  3223.                   DEFVAL { ''h }
  3224.                   ::= { x25CallParmEntry 25 }
  3225.  
  3226.           x25CallParmProtection OBJECT-TYPE
  3227.                   SYNTAX  DisplayString (SIZE(0..108))
  3228.                   ACCESS  read-write
  3229.                   STATUS  mandatory
  3230.                   DESCRIPTION
  3231.                           "A string contains the following:
  3232.                           A hex string containing the value for the
  3233.                           protection facility.  This will be converted
  3234.                           from hex to the octets actually in the
  3235.                           packet by the agent.  The agent will supply
  3236.                           the length field and the length octet is not
  3237.                           contained in this string.
  3238.  
  3239.                           An string containing the 3 characters DEF
  3240.                           for a circuit means use the PLE default (the
  3241.                           entry for the PLE default parameters may not
  3242.                           use the value DEF).
  3243.  
  3244.                           A zero length string mean no facility
  3245.                           requested."
  3246.                   REFERENCE "See ISO 8208 Section 15.3.2.5"
  3247.  
  3248.  
  3249.  
  3250. Throop                                                         [Page 58]
  3251.  
  3252. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3253.  
  3254.  
  3255.                   DEFVAL { ''h }
  3256.                   ::= { x25CallParmEntry 26 }
  3257.  
  3258.           x25CallParmExptData OBJECT-TYPE
  3259.                   SYNTAX  INTEGER {
  3260.                                   default (1),
  3261.                                   noExpeditedData (2),
  3262.                                   expeditedData (3)
  3263.                           }
  3264.                   ACCESS  read-write
  3265.                   STATUS  mandatory
  3266.                   DESCRIPTION
  3267.                           "The Expedited Data facility to negotiate.
  3268.                           A value of default for a circuit means use
  3269.                           the PLE default value.  The entry for the
  3270.                           PLE default parameters may not have the
  3271.                           value default."
  3272.                   REFERENCE "See ISO 8208 Section 15.3.2.7"
  3273.                   DEFVAL { noExpeditedData }
  3274.                   ::= { x25CallParmEntry 27 }
  3275.  
  3276.           x25CallParmUserData     OBJECT-TYPE
  3277.                   SYNTAX  OCTET STRING (SIZE (0..128))
  3278.                   ACCESS  read-write
  3279.                   STATUS  mandatory
  3280.                   DESCRIPTION
  3281.                           "The call user data as placed in the packet.
  3282.                           A zero length string indicates no call user
  3283.                           data.  If both the circuit call parameters
  3284.                           and the PLE default have call user data
  3285.                           defined, the data from the circuit call
  3286.                           parameters will be used.  If only the PLE
  3287.                           has data defined, the PLE entry will be
  3288.                           used.  If neither the circuit call
  3289.                           parameters or the PLE default entry has a
  3290.                           value, no call user data will be sent."
  3291.                   REFERENCE "See ISO 8208 Section 12.2.1.1.6, 12.2.1.2"
  3292.                   DEFVAL { ''h }
  3293.                   ::= { x25CallParmEntry 28 }
  3294.  
  3295.           x25CallParmCallingNetworkFacilities     OBJECT-TYPE
  3296.                   SYNTAX  OCTET STRING (SIZE (0..108))
  3297.                   ACCESS  read-write
  3298.                   STATUS  mandatory
  3299.                   DESCRIPTION
  3300.                           "The calling network facilities.  The
  3301.                           facilities are encoded here exactly as
  3302.                           encoded in the call packet.  These
  3303.  
  3304.  
  3305.  
  3306. Throop                                                         [Page 59]
  3307.  
  3308. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3309.  
  3310.  
  3311.                           facilities do not include the marker
  3312.                           facility code.
  3313.  
  3314.                           A zero length string in the entry for the
  3315.                           parameter to use when establishing a circuit
  3316.                           means use the PLE default.  A zero length
  3317.                           string in the entry for PLE default
  3318.                           parameters indicates no default facilities."
  3319.                   REFERENCE "See ISO 8206 Section 15.1, category b"
  3320.                   DEFVAL { ''h }
  3321.                   ::= { x25CallParmEntry 29 }
  3322.  
  3323.           x25CallParmCalledNetworkFacilities      OBJECT-TYPE
  3324.                   SYNTAX  OCTET STRING (SIZE (0..108))
  3325.                   ACCESS  read-write
  3326.                   STATUS  mandatory
  3327.                   DESCRIPTION
  3328.                           "The called network facilities.  The
  3329.                           facilities are encoded here exactly as
  3330.                           encoded in the call packet.  These
  3331.                           facilities do not include the marker
  3332.                           facility code.
  3333.  
  3334.                           A zero length string in the entry for the
  3335.                           parameter to use when establishing a circuit
  3336.                           means use the PLE default.  A zero length
  3337.                           string in the entry for PLE default
  3338.                           parameters indicates no default facilities."
  3339.                   REFERENCE "See ISO 8206 Section 15.1, category c"
  3340.                   DEFVAL { ''h }
  3341.                   ::= { x25CallParmEntry 30 }
  3342.  
  3343.           -- ###########################################################
  3344.           --              X.25 Traps
  3345.           -- ###########################################################
  3346.  
  3347.           x25Restart      TRAP-TYPE
  3348.                   ENTERPRISE  x25
  3349.                   VARIABLES { x25OperIndex }
  3350.                   DESCRIPTION
  3351.                           "This trap means the X.25 PLE sent or
  3352.                           received a restart packet.  The restart that
  3353.                           brings up the link should not send a
  3354.                           x25Restart trap so the interface should send
  3355.                           a linkUp trap.  Sending this trap means the
  3356.                           agent does not send a linkDown and linkUp
  3357.                           trap."
  3358.                   ::= 1
  3359.  
  3360.  
  3361.  
  3362. Throop                                                         [Page 60]
  3363.  
  3364. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3365.  
  3366.  
  3367.           x25Reset        TRAP-TYPE
  3368.                   ENTERPRISE  x25
  3369.                   VARIABLES { x25CircuitIndex,
  3370.                           x25CircuitChannel }
  3371.                   DESCRIPTION
  3372.                           "If the PLE sends or receives a reset, the
  3373.                           agent should send an x25Reset trap."
  3374.                   ::= 2
  3375.  
  3376.  
  3377.           -- ###########################################################
  3378.           --              X.25 Protocol Version Identifiers
  3379.           -- ###########################################################
  3380.  
  3381.           x25ProtocolVersion OBJECT IDENTIFIER
  3382.                   ::= { x25 10 }
  3383.  
  3384.                   -- X.25 CCITT 1976 version.
  3385.           x25protocolCcittV1976 OBJECT IDENTIFIER
  3386.                   ::= { x25ProtocolVersion 1 }
  3387.  
  3388.                   -- X.25 CCITT 1980 version.
  3389.           x25protocolCcittV1980 OBJECT IDENTIFIER
  3390.                   ::= { x25ProtocolVersion 2 }
  3391.  
  3392.                   -- X.25 CCITT 1984 version.
  3393.           x25protocolCcittV1984 OBJECT IDENTIFIER
  3394.                   ::= { x25ProtocolVersion 3 }
  3395.  
  3396.                   -- X.25 CCITT 1988 version.
  3397.           x25protocolCcittV1988 OBJECT IDENTIFIER
  3398.                   ::= { x25ProtocolVersion 4 }
  3399.  
  3400.                   -- X.25 1987 version of ISO 8208.
  3401.           x25protocolIso8208V1987 OBJECT IDENTIFIER
  3402.                   ::= { x25ProtocolVersion 5 }
  3403.  
  3404.                   -- X.25 1989 version of ISO 8208.
  3405.           x25protocolIso8208V1989 OBJECT IDENTIFIER
  3406.                   ::= { x25ProtocolVersion 6 }
  3407.  
  3408.           -- ###########################################################
  3409.  
  3410.           END
  3411.  
  3412.  
  3413.  
  3414.  
  3415.  
  3416.  
  3417.  
  3418. Throop                                                         [Page 61]
  3419.  
  3420. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3421.  
  3422.  
  3423. 5. Appendix: Revision History
  3424.  
  3425.           July 30 1992
  3426.  
  3427.           The July, 1992 release (Editor's Internal Reference Number
  3428.           2.14) made the following changes:
  3429.  
  3430.                The syntax of the index objects for tables that are
  3431.                congruent with the MIB-II ifTable were changed to
  3432.                ifIndexType.
  3433.  
  3434.                The x25CallParmRefCount object was added to the
  3435.                x25CallParmTable.
  3436.  
  3437.                The description of the x25CallParmTable and
  3438.                x25CallParmIndex objects were changed to only allow
  3439.                writing an entry with a zero reference count.
  3440.  
  3441.                A requirement for conformance was added after the
  3442.                definition of x25 in the ASN.1 definition.
  3443.  
  3444.           June 26 1992
  3445.  
  3446.           The June 29, 1992 release (Editor's Internal Reference Number
  3447.           2.12) made the following changes:
  3448.  
  3449.                The range of x25ChannelLIC was changed from (0..4096) to
  3450.                (0..4095).
  3451.  
  3452.                The range of x25ChannelHIC was changed from (0..4096) to
  3453.                (0..4095).
  3454.  
  3455.                The range of x25ChannelLTC was changed from (0..4096) to
  3456.                (0..4095).
  3457.  
  3458.                The range of x25ChannelHTC was changed from (0..4096) to
  3459.                (0..4095).
  3460.  
  3461.                The range of x25ChannelLOC was changed from (0..4096) to
  3462.                (0..4095).
  3463.  
  3464.                The range of x25ChannelHOC was changed from (0..4096) to
  3465.                (0..4095).
  3466.  
  3467.                The range of x25CircuitChannel was changed from (1..4096)
  3468.                to (0..4095).
  3469.  
  3470.                The range of x25ClearedCircuitChannel was changed from
  3471.  
  3472.  
  3473.  
  3474. Throop                                                         [Page 62]
  3475.  
  3476. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3477.  
  3478.  
  3479.                (1..4096) to (0..4095).
  3480.  
  3481.           June 1992
  3482.  
  3483.           The June 92 release (Editor's Internal Reference Number 2.11)
  3484.           made the following changes:
  3485.  
  3486.                A value of dxe was defined for x25AdmnInterfaceMode and
  3487.                x25OperInterfaceMode.
  3488.  
  3489.                The objects in the x25ChannelTable can now have a value
  3490.                of zero to indicate no channels configured in the range.
  3491.  
  3492.                The length of an X121Address was extended to 17 to
  3493.                accommodate the 1988 CCITT X.25 standard.
  3494.  
  3495.                Some object descriptions have been expanded and
  3496.                simplified, these include:  all the channel table objects
  3497.                except the index, x25AdmnDataRxmtCount,
  3498.                x25AdmnRejectCount, x25AdmnRegistrationRequestCount,
  3499.                x25OperDataRxmtCount, x25OperRejectCount,
  3500.                x25OperRegistrationRequestCount, x25CircuitEstablishTime,
  3501.                x25ClearedCircuitTimeEstablished,
  3502.                x25ClearedCircuitTimeCleared, x25CallParmIndex,
  3503.                x25CallParmInPacketSize, x25CircuitCalledAddress,
  3504.                x25CircuitOriginallCalledAddress,
  3505.                x25CircuitCallingAddress, x25CallParmFastSelect,
  3506.                x25CallParmCug, x25CallParmCugoa, x25CallParmBcug,
  3507.                x25CallParmNui, x25CallParmRpoa, x25CallParmCallingExt,
  3508.                x25CallParmCalledExt, x25CallParmProtection,
  3509.                x25StatInCallRefusals and x25CallParmOutPacketSize.
  3510.  
  3511.                The x25StatNumberPvcs object was deleted and
  3512.                x25AdmnNumberPVCs and x25OperNumberPVCs objects added.
  3513.  
  3514.                The object x25StatOutDataPackets was added.
  3515.  
  3516.                The object x25AdmnProtocolVersionSupported as added.
  3517.  
  3518.                The x25CircuitRemoteDteAddress was deleted.
  3519.  
  3520.                Some ASN.1 errors were corrected.
  3521.  
  3522.           April 1992
  3523.  
  3524.           The April release (Editor's Internal Reference Number 2.8)
  3525.           made many changes to incorporate the comments of the working
  3526.           group meeting in March 1992.
  3527.  
  3528.  
  3529.  
  3530. Throop                                                         [Page 63]
  3531.  
  3532. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3533.  
  3534.  
  3535.                All reference comments were changed to reference fields.
  3536.  
  3537.                The type PositiveInteger was imported from the RFC1381-
  3538.                MIB and used for all index and timer values.
  3539.  
  3540.                The x25PleTable was split into the x25AdmnTable,
  3541.                x25OperTable, and x25StatTable.
  3542.  
  3543.                The timer and counter objects from the x25CircuitTable
  3544.                were moved to the x25AdmnTable and replicated in the
  3545.                x25OperTable
  3546.  
  3547.                The objects in the x25CircuitTable were reordered to put
  3548.                the non-integer objects at the end of the table for
  3549.                easier implementation.
  3550.  
  3551.                The called and calling extension character set was
  3552.                extended to include a-f, and A-F.
  3553.  
  3554.                Additional states were added to the x25CircuitStatus
  3555.                object.
  3556.  
  3557.                Additional values were added to x25CircuitDirection
  3558.                x25CircuitCallParamId, and the addresses in the Circuit
  3559.                Table for PVCs.
  3560.  
  3561.                The length of the X25Address was changed to 0..15.
  3562.  
  3563.                The objects x25ClearedCircuitTimeEstablished,
  3564.                x25ClearedCircuitInPdus, and x25ClearedCircuitOutPdus
  3565.                were added to the x25ClearedCircuitTable.
  3566.  
  3567.                The name of the x25CircuitName was changed to
  3568.                x25CircuitDescr and the description was expanded.
  3569.  
  3570.                The access of the x25CircuitCallParamId was changed to
  3571.                read-only.
  3572.  
  3573.                The x25ClearedCircuitCodes object was split into the
  3574.                x25ClearedCircuitClearingCause and
  3575.                x25ClearedCircuitDiagnosticCode objects.
  3576.  
  3577.                The semantics of the x25ClearedCircuitIndex was
  3578.                redefined.
  3579.  
  3580.                Some of the description clauses were changed in an
  3581.                attempt to add clarity.
  3582.  
  3583.  
  3584.  
  3585.  
  3586. Throop                                                         [Page 64]
  3587.  
  3588. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3589.  
  3590.  
  3591.                DEFVAL clauses were added to most objects in the
  3592.                x25CallParmTable.
  3593.  
  3594.                Additional text was added to the description section to
  3595.                provide an overview of the tables of the MIB.
  3596.  
  3597.                The minimum allowable value for maximum active circuits
  3598.                was changed from one to zero.
  3599.  
  3600.           February 1992
  3601.  
  3602.           The February release (Editor's Internal Reference Number 1.14)
  3603.           made many changes.
  3604.  
  3605.                Many of the tables were combined.  For example, the
  3606.                x25InfoTable, x25PktStatTable, and x25TmrStatTable were
  3607.                combined into the x25PleTable.  The x25ConInfoTable,
  3608.                x25ConStatTable, and x25ConTimrTable were combined into
  3609.                the x25CircuitTable.
  3610.  
  3611.                The objects for call parameters were drastically
  3612.                reworked.  All call parameters were combined in the
  3613.                x25CallParmTable.  Any table, such as the  x25PleTable or
  3614.                x25CircuitTable, that needs to reference call parameters
  3615.                identifies an entry in the new table.  As part of this
  3616.                the x25ConDefTable was deleted and replaced with the
  3617.                x25PleDefCallParamId.
  3618.  
  3619.                The x25PvcTable was deleted; the x25CircuitStatus object
  3620.                provides similar information about PVCs.
  3621.  
  3622.                The x25ClearedCircuitTable was added to record the status
  3623.                code of cleared circuits.
  3624.  
  3625.                Many object definitions were restructured. For example,
  3626.                the time units for timers was changed from 1/100ths of a
  3627.                second to milliseconds.  Some indexes into tables were
  3628.                replaced with object identifiers.
  3629.  
  3630.                Much of the introductory text was changed and the
  3631.                references were changed to match.
  3632.  
  3633.           October 1991
  3634.  
  3635.           The October release (Editor Internal Reference Number 1.10)
  3636.           made the following changes:
  3637.  
  3638.                Changed x25ConInfoStatus to clarify the description and
  3639.  
  3640.  
  3641.  
  3642. Throop                                                         [Page 65]
  3643.  
  3644. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3645.  
  3646.  
  3647.                the pvcResetting(5) value was changed to pvcResetting(6)
  3648.                to avoid a conflict with a previous use of the number 5.
  3649.  
  3650.                The name of the counter object
  3651.                x25TmrStatRetryCountsExceeded was changed to
  3652.                x25TmrStatRetryCountExceededs.
  3653.  
  3654.                The name of the counter object
  3655.                x25TmrStatClearCountsExceeded was changed to
  3656.                x25TmrStatClearCountExceededs.
  3657.  
  3658.                All occurrence of Guage was changed to Gauge.
  3659.  
  3660.                Added the x25CallFcltyTable, x25CallFcltyCcittTable, and
  3661.                x25CallParamTable.
  3662.  
  3663.           June 1991
  3664.  
  3665.           The June release corrected some syntax errors and cleaned up
  3666.           some other minor things.
  3667.  
  3668.           April 1991
  3669.  
  3670.           The April 26 release of this document was the first release.
  3671.           That version was derived from the ISO work on network layer
  3672.           management as presented in ISO/IEC 10733 [11]
  3673.  
  3674. 6.  Acknowledgements
  3675.  
  3676. This document was produced by the x25mib working group:
  3677.  
  3678.                Fred Baker, ACC
  3679.                Art Berggreen, ACC
  3680.                Frank Bieser
  3681.                Gary Bjerke, Tandem
  3682.                Bill Bowman, HP
  3683.                Christopher Bucci, Datability
  3684.                Charles Carvalho, ACC
  3685.                Jeff Case, Snmp Research
  3686.                Angela Chen, HP
  3687.                Carson Cheung, BNR
  3688.                Tom Daniel, Spider Systems
  3689.                Chuck Davin, MIT
  3690.                Billy Durham, Honeywell
  3691.                Richard Fox, Synoptics
  3692.                Doug Geller, Data General
  3693.                Herve Goguely, LIR Corp
  3694.                Andy Goldthorpe, british-telecom
  3695.  
  3696.  
  3697.  
  3698. Throop                                                         [Page 66]
  3699.  
  3700. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3701.  
  3702.  
  3703.                Walter D. Guilarte
  3704.                David Gurevich
  3705.                Steve Huston, Process Software Corporation
  3706.                Jon Infante, ICL
  3707.                Frank Kastenholz, Clearpoint
  3708.                Zbigniew Kielczewski, Eicon
  3709.                Cheryl Krupezak, Georgia Tech
  3710.                Mats Lindstrom, Diab Data AB
  3711.                Andrew Malis, BBN
  3712.                Evan McGinnis, 3Com
  3713.                Gary (G.P.)Mussar, BNR
  3714.                Chandy Nilakantan, 3Com
  3715.                Randy Pafford, Data General
  3716.                Ragnar Paulson, The Software Group Limited
  3717.                Dave Perkins, Synoptics
  3718.                Walter Pinkarschewsky, DEC
  3719.                Karen Quidley, Data General
  3720.                Chris Ranch, Novell
  3721.                Paul S. Rarey, DHL Systems Inc.
  3722.                Jim Roche, Newbridge Research
  3723.                Philippe Roger, LIR Corp.
  3724.                Timon Sloane
  3725.                Mike Shand, DEC
  3726.                Brad Steina, Microcom
  3727.                Bob Stewart, Xyplex
  3728.                Tom Sullivan, Data General
  3729.                Rodney Thayer, Sable Technology Corporation
  3730.                Mark Therieau, Microcom
  3731.                Jane Thorn, Data General
  3732.                Dean Throop, Data General
  3733.                Maurice Turcotte, Racal Datacom
  3734.                Mike Zendels, Data General
  3735.  
  3736. In addition, the contributions of the following individuals are also
  3737. acknowledged:
  3738.  
  3739.                    John Harper, DEC
  3740.                    Chairman of the ISO committee for
  3741.                    Network Level Management Information
  3742.  
  3743. 7.  References
  3744.  
  3745.    [1] Rose M., and K. McCloghrie, "Structure and Identification of
  3746.        Management Information for TCP/IP-based internets", STD 16, RFC
  3747.        1155, Performance Systems International, Hughes LAN Systems, May
  3748.        1990.
  3749.  
  3750.    [2] McCloghrie K., and M. Rose, "Management Information Base for
  3751.  
  3752.  
  3753.  
  3754. Throop                                                         [Page 67]
  3755.  
  3756. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3757.  
  3758.  
  3759.        Network Management of TCP/IP-based internets", RFC 1156, Hughes
  3760.        LAN Systems, Performance Systems International, May 1990.
  3761.  
  3762.    [3] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
  3763.        Network Management Protocol", STD 15, RFC 1157, SNMP Research,
  3764.        Performance Systems International, Performance Systems
  3765.        International, MIT Laboratory for Computer Science, May 1990.
  3766.  
  3767.    [4] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
  3768.        STD 16, RFC 1212, Performance Systems International, Hughes LAN
  3769.        Systems, March 1991.
  3770.  
  3771.    [5] Rose M., Editor, "Management Information Base for Network
  3772.        Management of TCP/IP-based internets: MIB-II", STD 17, RFC 1213,
  3773.        Performance Systems International, March 1991.
  3774.  
  3775.    [6] Information processing systems - Open Systems Interconnection -
  3776.        Specification of Abstract Syntax Notation One (ASN.1),
  3777.        International Organization for Standardization, International
  3778.        Standard 8824, December 1987.
  3779.  
  3780.    [7] Information processing systems - Open Systems Interconnection -
  3781.        Specification of Basic Encoding Rules for Abstract Notation One
  3782.        (ASN.1), International Organization for Standardization,
  3783.        International Standard 8825, December 1987.
  3784.  
  3785.    [8] Stewart, B., Editor, "Definitions of Managed Objects for RS-232-
  3786.        like Hardware Devices", RFC 1317, Xyplex, Inc., April 1992.
  3787.  
  3788.    [9] Throop, D., Editor, "SNMP MIB extension for LAPB", RFC 1381, Data
  3789.        General Corporation, November 1992.
  3790.  
  3791.   [10] "Information technology - - Data communication - X.25 Packet
  3792.        layer Protocol for Data Terminal Equipment", International
  3793.        Organization for Standardization, International Standard 8208,
  3794.        March 1990.
  3795.  
  3796.   [11] "Information Technology - Telecommunications and information
  3797.        exchange between systems - Elements of Management Information
  3798.        Related to OSI network Layer Standards", Committee Draft
  3799.        International Standard 10733, November 1990.
  3800.  
  3801. 8.  Security Considerations
  3802.  
  3803.    Security issues are not discussed in this memo.
  3804.  
  3805.  
  3806.  
  3807.  
  3808.  
  3809.  
  3810. Throop                                                         [Page 68]
  3811.  
  3812. RFC 1382                 X.25 Packet Layer MIB             November 1992
  3813.  
  3814.  
  3815. 9.  Authors' Addresses
  3816.  
  3817.    Dean D. Throop
  3818.    Data General Corporation
  3819.    62 Alexander Dr.
  3820.    Research Triangle Park, NC 27709
  3821.  
  3822.    Phone: (919)248-8421
  3823.    EMail: throop@dg-rtp.dg.com
  3824.  
  3825.  
  3826.  
  3827.  
  3828.  
  3829.  
  3830.  
  3831.  
  3832.  
  3833.  
  3834.  
  3835.  
  3836.  
  3837.  
  3838.  
  3839.  
  3840.  
  3841.  
  3842.  
  3843.  
  3844.  
  3845.  
  3846.  
  3847.  
  3848.  
  3849.  
  3850.  
  3851.  
  3852.  
  3853.  
  3854.  
  3855.  
  3856.  
  3857.  
  3858.  
  3859.  
  3860.  
  3861.  
  3862.  
  3863.  
  3864.  
  3865.  
  3866. Throop                                                         [Page 69]
  3867.  
  3868.