home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Internet Info 1997 December
/
Internet_Info_CD-ROM_Walnut_Creek_December_1997.iso
/
ien
/
ien-92
< prev
next >
Wrap
Text File
|
1988-12-02
|
14KB
|
569 lines
IEN 92
Protocol Options
Jon Postel
2 May 1979
Information Sciences Institute
University of Southern California
4676 Admiralty Way
Marina del Rey, California 90291
(213) 822-1511
IEN-92 J. Postel
ISI
2 May 1979
PROTOCOL OPTIONS
----------------
Introduction
------------
This memo collectes the definition of the various options used in the
Internet protocols, in particular the options from Internet
Protocol (IN) [1] and Transmission Control Protocol (TCP) [2].
Internet Protocol Options
-------------------------
The option field is variable in length. The format is an option-type
octet, an option-length octet, and the actual option-data octets. There
are two special case options which have only the option-type octet.
The option-length octet, which follows, includes the option-type octet
and the option-length octet in the octet count of the option length.
The option-type octet can be viewed as having 3 fields:
1 bit reserved, must be zero
2 bits option class,
5 bits option number.
The option classes are:
0 = control
1 = internet error
2 = experimental debugging and measurement
3 = reserved for future use
Postel [page 1]
2 May 1979
Protocol Options IEN 92
The following internet options are defined:
CLASS NUMBER LENGTH DESCRIPTION
----- ------ ------ -----------
0 0 - End of Option list. This option occupies only 1
octet; it has no length octet.
0 1 - No Operation. This option occupies only 1 octet;
it has no length octet.
0 2 4 S/P/T. Used to carry Security, Precedence, and
user group (TCC) information compatible with
AUTODIN II requirements.
0 3 var. Source Routing. Used to route the internet packet
based on information supplied by the source.
0 4 var. BCR Open.
0 5 var. BCR Close.
0 6 var. BCR other.
0 7 var. Return Route. Used to record the route taken by
an internet packet.
1 1 var. General Error Report. Used to report errors in
internet packet processing.
2 4 4 Internet Timestamp. Used to carry timestamping
information.
2 5 4 Satellite Timestamp. Used as above for
special satellite network testing.
Specific Option Definitions
End of Option List
+--------+
|00000000|
+--------+
Type=0
This option indicates the end of the option list. This might not
coincide with the end of the internet header according to the
internet header length. This is used at the end of all options, not
the end of each option, and need only be used if the end of the
options would not otherwise coincide with the end of the internet
header.
[page 2] Postel
2 May 1979
IEN 92 Protocol Options
No Operation
+--------+
|00000001|
+--------+
Type=1
This option may be used between options, for example, to align the
beginning of a subsequent option on a 32 bit boundary.
S/P/T
This option provides a way for AUTODIN II hosts to send security,
precedence, and TCC (closed user groups) parameters through networks
whose transport leader does not contain fields for this information.
The format for this option is as follows:
+--------+--------+---------+--------+
|00000010|00000100|Prec|Sec | TCC |
+--------+--------+---------+--------+
Type=2 Length=4
Precedence: 4 bits
Specifies one of 16 levels of precedence
Security: 4 bits
Specifies one of 16 levels of security
Transmission Control Code: 8 bits
Provides a means to compartmentalize traffic and define controlled
communities of interest among subscribers.
This option might be used between hosts on the AUTODIN II network
and other networks, such as the EDN at DCEC.
Postel [page 3]
2 May 1979
Protocol Options IEN 92
Source Route
+--------+--------+--------+---------//--------+
|00000011| length | source route |
+--------+--------+--------+---------//--------+
Option=3
The source route option provides a means for the source of an
internet datagram to supply routing information to be used by the
gateways in forwarding the datagram to the destination.
The option begins with the option type code. The second octet is
the option length which includes the option type code and the length
octet, as well as length-2 octets of source route data.
A source route is composed of a series of internet addresses. Each
internet address is 32 bits or 4 octets. The length defaults to
two, which indicates the source route is empty and the remaining
routing is to be based on the destination address field.
If the address in destination address field has been reached and the
length is not two, the next address in the source route replaces the
address in the destination address field, and that address is
deleted from the source route and the length is reduced by four.
Return Route
+--------+--------+--------+---------//--------+
|00000111| length | return route |
+--------+--------+--------+---------//--------+
Option=7
The return route option provides a means to record the route of an
internet datagram.
The option begins with the option type code. The second octet is
the option length which includes the option type code and the length
octet, as well as length-2 octets of return route data.
A return route is composed of a series of internet addresses. The
length defaults to two, which indicates the return route is empty.
When an internet module routes a datagram it checks to see if the
return route option is present. If it is, it inserts its own
internet address as known in the environment into which this
[page 4] Postel
2 May 1979
IEN 92 Protocol Options
datagram is being forwarded into the return route at the front of
the address string and increments the length by four.
BCR Options
BCR OPEN
+--------+--------+------
|00000100| length | data
+--------+--------+------
Type=4
BCR CLOSE
+--------+--------+------
|00000101| length | data
+--------+--------+------
Type=5
BCR OTHER
+--------+--------+------
|00000110| length | data
+--------+--------+------
Type=6
These options are used with the BCR.
General Error Report
+--------+--------+--------+--------+--------//--------+
|00100001| length |err code| id | |
+--------+--------+--------+--------+--------//--------+
Type=33
The general error report is used to report an error detected in
processing an internet packet to the originator of that packet. The
"err code" indicates the type of error detected and the "id" is
copied from the identification field of the packet in error,
additional octets of error information may be present depending on
the err code.
ERR CODE:
0 - Undetermined Error, used when no information is available
about the type of error or the error does not fit any defined
Postel [page 5]
2 May 1979
Protocol Options IEN 92
class. Following the id should be as much of the datagram as fits
in the option space.
No err codes have been defined for specific classes as yet.
Internet Timestamp
+--------+--------+--------+--------+--------+--------+
|01000100|00000100| time in milliseconds |
+--------+--------+--------+--------+--------+--------+
Type=68 Length=4
The data of the timestamp is a 32 bit time measured in milliseconds.
Satellite Timestamp
+--------+--------+--------+--------+--------+--------+
|01000101|00000100| time in milliseconds |
+--------+--------+--------+--------+--------+--------+
Type=69 Length=4
The data of the timestamp is a 32 bit time measured in milliseconds.
The options are just that, optional. That is, the presence or absence
of an option is the choice of the sender, but each internet module must
understand how to process every option.
Transmission Control Protocol Options
-------------------------------------
Options may occupy space at the end of the TCP header and are a multiple
of 8 bits in length. All options are included in the checksum. An
option may begin on any octet boundary. All options have the same basic
format:
Option kind: 8 bits
Option length: 8 bits
Length in octets (including the two octets of length and kind
information)
There are two special cases for options.
The first is the End-of-Options option. Only one octet is
associated with this option, the kind octet itself.
[page 6] Postel
2 May 1979
IEN 92 Protocol Options
The second is the No-Operation option and is also one octet long.
Note that the list of options may be shorter than the data offset
field might imply. The content of the header beyond the End-of-Option
option should be header padding (i.e., zero).
Currently defined options include (kind indicated in octal):
Kind Length Meaning
---- ------ -------
0 - End of option list.
1 - No-Operation.
100 - Reserved.
105 4 Buffer Size.
Specific Option Definitions
End of Option List
+--------+
|00000000|
+--------+
Kind=0
This option code indicates the end of the option list. This might
not coincide with the end of the TCP header according to the Data
Offset field. This is used at the end of all options, not the end
of each option, and need only be used if the end of the options
would not otherwise coincide with the end of the TCP header.
No-Operation
+--------+
|00000001|
+--------+
Kind=1
This option code may be used between options, for example, to align
the beginning of a subsequent option on a word boundary. There is
no guarantee that senders will use this option, so receivers must be
prepared to process options even if they do not begin on a word
boundary.
Postel [page 7]
2 May 1979
Protocol Options IEN 92
Buffer Size
+--------+--------+---------+--------+
|01000101|00000100| buffer size |
+--------+--------+---------+--------+
Kind=105 Length=4
Buffer Size Option Data: 16 bits
If this option is present, then it communicates the receive buffer
size at the TCP which sends this segment. This field should only
be sent in segments with the SYN control bit set. If this option
is not used, the default buffer size of one octet is assumed.
[page 8] Postel
2 May 1979
IEN 92 Protocol Options
References
References
----------
[1] Postel, J., "Internetwork Datagram Protocol -- Version 4,"
IEN 80, USC-Information Sciences Institute, February 1979.
[2] Postel, J., "Transmission Control Protocol -- Version 4,"
IEN 81, USC-Information Sciences Institute, February 1979.
Postel [page 9]