Internet Info 1997 December

home *** CD-ROM | disk | FTP | other *** search

/ Internet Info 1997 December / Internet_Info_CD-ROM_Walnut_Creek_December_1997.iso / drafts / draft_ietf_j_p / draft-ietf-pppext-eaptls-01.txt < prev next >

Wrap

Text File | 1997-10-15 | 50KB | 1,252 lines

PPP Extensions Working Group Bernard Aboba INTERNET-DRAFT Microsoft Category: Standards Track Dan Simon <draft-ietf-pppext-eaptls-01.txt> Microsoft 14 October 1997 PPP EAP TLS Authentication Protocol 1. Status of this Memo This document is an Internet-Draft. Internet-Drafts are working docu- ments of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute work- ing documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference mate- rial or to cite them other than as ``work in progress.'' To learn the current status of any Internet-Draft, please check the ``1id-abstracts.txt'' listing contained in the Internet-Drafts Shadow Directories on ds.internic.net (US East Coast), nic.nordu.net (Europe), ftp.isi.edu (US West Coast), or munnari.oz.au (Pacific Rim). The distribution of this memo is unlimited. It is filed as <draft- ietf-pppext-eaptls-01.txt>, and expires May 1, 1998. Please send com- ments to the authors. 2. Abstract The Point-to-Point Protocol (PPP) provides a standard method for transporting multi-protocol datagrams over point-to-point links. PPP also defines an extensible Link Control Protocol (LCP), which can be used to negotiate authentication methods, as well as an Encryption Control Protocol (ECP), used to negotiate data encryption over PPP links, and a Compression Control Protocol (CCP), used to negotiate compression methods. The Extensible Authentication Protocol (EAP) is a PPP extension that provides support for additional authentication methods within PPP. Transport Level Security (TLS) provides for mutual authentication, ciphersuite negotiation and key exchange between two endpoints. This document describes how these TLS mechanisms may be used within EAP. 3. Introduction The Extensible Authentication Protocol (EAP), described in [5], pro- vides a standard mechanism for support of additional authentication methods within PPP. Through the use of EAP, support for a number of Aboba & Simon [Page 1] INTERNET-DRAFT 14 October 1997 authentication schemes may be added, including smart cards, Kerberos, Public Key, One Time Passwords, and others. To date however, EAP meth- ods such as [6] have focussed on authenticating a client to a server. However, in order to guard against rogue servers, it may be desirable to support mutual authentication. In addition, since PPP encryption protocols such as [10] and [11] assume existence of a session key, it is useful to have a mechanism for session key establishment. Since design of authentication and key management protocols is a non-trivial exercise, it is desirable to avoid creating new mechanisms for this. The EAP protocol described in this document allows a PPP peer to take advantage of the mutual authentication and key management capabilities of the TLS protocol, described in [15]. 3.1. Requirements language This specification uses the same words as [12] for defining the sig- nificance of each particular requirement. These words are: MUST This word, or the adjectives "REQUIRED" or "SHALL", means that the definition is an absolute requirement of the speci- fication. MUST NOT This phrase, or the phrase "SHALL NOT", means that the defi- nition is an absolute prohibition of the specification. SHOULD This word, or the adjective "RECOMMENDED", means that there may exist valid reasons in particular circumstances to ignore a particular item, but the full implications must be understood and carefully weighed before choosing a different course. SHOULD NOT This phrase means that there may exist valid reasons in par- ticular circumstances when the particular behavior is acceptable or even useful, but the full implications should be understood and the case carefully weighed before imple- menting any behavior described with this label. MAY This word, or the adjective "", means that an item is truly optional. One vendor may choose to include the item because a particular marketplace requires it or because the vendor feels that it enhances the product while another vendor may omit the same item. An implementation which does not include a particular option MUST be prepared to interoperate with another implementation which does include the option, though perhaps with reduced functionality. In the same vein an implementation which does include a particular option MUST be prepared to interoperate with another implementation which does not include the option.(except, of course, for the feature the option provides) Aboba & Simon [Page 2] INTERNET-DRAFT 14 October 1997 An implementation is not compliant if it fails to satisfy one or more of the must or must not requirements for the protocols it implements. An implementation that satisfies all the must, must not, should and should not requirements for its protocols is said to be "uncondition- ally compliant"; one that satisfies all the must and must not require- ments but not all the should or should not requirements for its proto- cols is said to be "conditionally compliant." 4. Protocol overview 4.1. Overview of the EAP-TLS conversation As described in [5] and [17], the EAP-TLS conversation will typically begin with the authenticator and the peer negotiating EAP. The authenticator will then typically send an EAP-Request/Identity packet to the peer, and the peer will respond with an EAP-Response/Identity packet to the authenticator, containing the peer's userId. From this point forward, while nominally the EAP conversation occurs between the authenticator and the peer, as described in [17] the authenticator MAY act as a passthrough device, with the EAP packets received from the peer being encapsulated for transmission to a RADIUS server or backend security server. In the discussion that follows, we will use the term "EAP server" to denote the ultimate endpoint con- versing with the peer. Once having received the peer's userId, the EAP server will respond with an EAP-TLS/Start packet, which is an EAP-Request packet with EAP- Type=EAP-TLS, and no data. The EAP-TLS conversation will then begin, with the peer sending an EAP-Response packet with EAP-Type=EAP-TLS. The data field of that packet will encapsulate one or more TLS records in TLS record layer format, containing a TLS client_hello handshake message. The current cipher spec for the TLS records will be TLS_NULL_WITH_NULL_NULL and null compression. This current cipher spec remains the same until the change_cipher_spec message signals that subsequent records will have the negotiated attributes for the remainder of the handshake. The client_hello message contains the client's TLS version number, a sessionId, a random number, and a set of ciphersuites supported by the client. The version offered by the client MUST correspond to TLS v1.0 or later. The EAP server will then respond with an EAP-Request packet with EAP- Type=EAP-TLS. The data field of this packet will encapsulate one or more TLS records. These will contain a TLS server_hello handshake mes- sage, possibly followed by TLS certificate, server_key_exchange, cer- tificate_request, server_hello_done and/or finished handshake mes- sages, and/or a TLS change_cipher_spec message. The server_hello handshake message contains a TLS version number, another random num- ber, a sessionId, and a ciphersuite. The version offered by the Aboba & Simon [Page 3] INTERNET-DRAFT 14 October 1997 server MUST correspond to TLS v1.0 or later. If the client's sessionId is null or unrecognized by the server, the server will choose the sessionId to establish a new session; other- wise, the sessionId will match that offered by the client, indi- cating a resumption of the previously established session with that sessionID. The server will also choose a ciphersuite from those offered by the client; if the session matches the client's, then the ciphersuite MUST match the one negotiated during the handshake proto- col execution that established the session. The purpose of the sessionId within the TLS protocol is to allow for improved efficiency in the case where a client repeatedly attempts to authenticate to an EAP server within a short period of time. While this model was developed for use with HTTP authentication, it may also have application to PPP authentication (e.g. multilink). As a result, it is left up to the peer whether to attempt to continue a previous session, thus shortening the TLS conversation. Typically the peer's decision will be made based on the time elapsed since the previous authentication attempt to that EAP server. Based on the ses- sionId chosen by the peer, and the time elapsed since the previous authentication, the EAP server will decide whether to allow the con- tinuation, or whether to choose a new session. In the case where the EAP server and authenticator reside on the same device, then client will only be able to continue sessions when con- necting to the same NAS or tunnel server. Should these devices be set up in a rotary or round-robin then it may not be possible for the peer to know in advance the authenticator it will be connecting to, and therefore which sessionId to attempt to reuse. As a result, it is likely that the continuation attempt will fail. In the case where the EAP authentication is remoted then continuation is much more likely to be successful, since multiple NAS devices and tunnel servers will remote their EAP authentications to the same RADIUS server. If the EAP server is resuming a previously established session, then it MUST include only a TLS change_cipher_spec message and a TLS fin- ished handshake message after the server_hello message. The finished message contains the EAP server's authentication response to the peer. If the EAP server is not resuming a previously established session, then it MUST include a TLS server_certificate handshake message, and a server_hello_done handshake message MUST be the last handshake message encapsulated in this EAP-Request packet. The certificate message contains a public key certificate chain for either a key exchange public key (such as an RSA or Diffie-Hellman key exchange public key) or a signature public key (such as an RSA or DSS signature public key). In the latter case, a TLS server_key_exchange handshake message MUST also be included to allow the key exchange to take place. The certificate_request message is included when the server desires the client to authenticate itself via public key. While the EAP server Aboba & Simon [Page 4] INTERNET-DRAFT 14 October 1997 SHOULD require client authentication, this is not a requirement, since it may be possible that the server will require that the peer authen- ticate via some other means. The peer will then respond with an EAP-Response packet with EAP- Type=EAP-TLS. The data field of this packet will encapsulate one or more TLS records containing a TLS change_cipher_spec message and fin- ished handshake message, and possibly certificate, certificate_verify and/or client_key_exchange handshake messages. If the preceding server_hello message sent by the EAP server in the preceding EAP- Request packet indicated the resumption of a previous session, then the peer MUST send only the change_cipher_spec and finished handshake messages. The finished message contains the peer's authentication response to the EAP server. If the preceding server_hello message sent by the EAP server in the preceeding EAP-Request packet did not indicate the resumption of a previous session, then the peer MUST send, in addition to the change_cipher_spec and finished messages, a client_key_exchange mes- sage, which completes the exchange of a shared master secret between the peer and the EAP server. If the EAP server sent a certifi- cate_request message in the preceding EAP-Request packet, then the peer MUST send, in addition, certificate and certificate_verify hand- shake messages. The former contains a certificate for the peer's sig- nature public key, while the latter contains the peer's signed authen- tication response to the EAP server. After receiving this packet, the EAP server will verify the peer's certificate and digital signature, if requested. If the peer's authentication is unsuccessful, the EAP server will send an EAP-Request packet with EAP-Type=EAP-TLS, encapsulating a TLS record containing the appropriate TLS alert message. It is useful for the EAP server to send a TLS alert message rather than to immediately terminate the conversation so as to allow the peer to inform the user of the cause of the failure and possibly allow for a restart of the conversation. To ensure that the peer receives the TLS alert message, the EAP server will wait for the peer to reply with an EAP-Response packet. The EAP- Response packet sent by the peer may encapsulate a TLS client_hello handshake message, in which case the EAP server may allow the EAP-TLS conversation to be restarted, or it may contain an EAP-Response packet with EAP-Type=EAP-TLS and no data, in which case the EAP-Server will send an EAP-Failure packet, and terminate the conversation. It is up to the EAP server whether to allow restarts, and if so, how many times the conversation can be restarted. An EAP Server implementing restart capability SHOULD impose a limit on the number of restarts, so as to protect against denial of service attacks. If the peers authenticates successfully, the EAP server will respond with an EAP-Request packet with EAP-Type=EAP-TLS, which includes, in the case of a new TLS session, one or more TLS records containing TLS change_cipher_spec and finished handshake messages. The latter con- tains the EAP server's authentication response to the peer. The peer Aboba & Simon [Page 5] INTERNET-DRAFT 14 October 1997 will then verify the hash in order to authenticate the EAP server. If the EAP server authenticates unsuccessfully, the peer sends an EAP- Response packet of EAP-Type=EAP-TLS containing a TLS Alert message identifying the reason for the failed authentication. It is useful for the peer to send a TLS alert message rather than immediately terminat- ing the conversation so as to allow the EAP server to log the cause of the error for examination by the system administrator. To ensure that the EAP Server receives the TLS alert message, the peer will wait for the EAP-Server to reply before terminating the conversa- tion. The EAP Server MUST reply with an EAP-Failure packet since server authentication failure is a terminal condition. If the EAP server authenticates successfully, the peer sends an EAP- Response packet of EAP-Type=EAP-TLS, and no data. The EAP-Server then responds with an EAP-Success message. 4.2. Retry behavior As with other EAP protocols, the EAP server is responsible for retry behavior. This means that if the EAP server does not receive a reply from the peer, it will resend the EAP-Request for which it has not yet received an EAP-Response. However, the peer will not resend EAP- Response packets without first being prompted by the EAP server. For example, if the initial EAP-TLS start packet sent by the EAP server were to be lost, then the peer would not receive this packet, and would not respond to it. As a result, the EAP-TLS start packet would be resent by the EAP server. Once the peer received the EAP-TLS start packet, it would respond with an EAP-Response encapsulating the client_hello message. If the EAP-Response were to be lost, then the EAP server would resend the initial EAP-TLS start, and the peer would resend the EAP-Response. As a result, it is possible that a peer will receive duplicate EAP- Request messages, and may send duplicate EAP-Responses. Both the peer and the EAP-Server should be engineered to handle this possibility. 4.3. Identity verification As part of the TLS negotiation, the server presents a certificate to the peer, and if mutual authentication is requested, the peer presents a certificate to the server. Note that since the peer has made a claim of identity in the EAP- Response/Identity (MyID) packet, the EAP server SHOULD verify that the claimed identity corresponds to the certificate presented by the peer. Typically this will be accomplished either by placing the userId within the peer certificate, or by providing a mapping between the peer certificate and the userId using a directory service. Aboba & Simon [Page 6] INTERNET-DRAFT 14 October 1997 Similarly, the peer MUST verify the validity of the EAP server cer- tificate, and SHOULD also examine the EAP server name presented in the certificate, in order to determine whether the EAP server can be trusted. Please note that in the case where the EAP authentication is remoted that the EAP server will not reside on the same machine as the authenticator, and therefore the name in the EAP server's certificate cannot be expected to match that of the intended destination. In this case, a more appropriate test might be whether the EAP server's cer- tificate is signed by a CA controlling the intended destination and whether the EAP server exists within a target sub-domain. 4.4. Key derivation Since the normal TLS keys are used in the handshake, and therefore should not be used in a different context, new encryption keys must be derived from the TLS master secret for use with PPP encryption. For both peer and EAP server, the derivation proceeds as follows: given the master secret negotiated by the TLS handshake, the pseudorandom function (PRF) defined in the specification for the version of TLS in use, and the value random defined as the concatenation of the hand- shake message fields client_hello.random and server_hello.random (in that order), the value PRF(master secret, "client EAP encryption", random) is computed up to 128 bytes, and the value PRF("", "client EAP encryption", random) is computed up to 64 bytes (where "" is an empty string). The peer encryption key (the one used for encrypting data from peer to EAP server) is obtained by truncating to the correct length the first 32 bytes of the first PRF of these two output strings. The EAP server encryption key (the one used for encrypting data from EAP server to peer), if different from the client encryption key, is obtained by truncating to the correct length the second 32 bytes of this same PRF output string. The client authentication key (the one used for computing MACs for messages from peer to EAP server), if used, is obtained by truncating to the correct length the third 32 bytes of this same PRF output string. The EAP server authen- tication key (the one used for computing MACs for messages from EAP server to peer), if used, and if different from the peer authentica- tion key, is obtained by truncating to the correct length the fourth 32 bytes of this same PRF output string. The peer initialization vec- tor (IV), used for messages from peer to EAP server if a block cipher has been specified, is obtained by truncating to the cipher's block size the first 32 bytes of the second PRF output string mentioned above. Finally, the server initialization vector (IV), used for mes- sages from peer to EAP server if a block cipher has been specified, is obtained by truncating to the cipher's block size the second 32 bytes of this second PRF output. The use of these encryption and authentication keys is specific to the PPP encryption mechanism used, such as those defined in [10] and [11]. Additional keys or other non-secret values (such as IVs) can be obtained as needed for future PPP encryption methods by extending the outputs of the PRF beyond 128 bytes and 64 bytes, respectively. Aboba & Simon [Page 7] INTERNET-DRAFT 14 October 1997 4.5. ECP negotiation Since TLS supports ciphersuite negotiation, peers completing the TLS negotiation will also have selected a ciphersuite, which includes key strength, encryption and hashing methods. As a result, a subsequent Encryption Control Protocol (ECP) conversation, if it occurs, has a predetermined result. In order to ensure agreement between the EAP-TLS ciphersuite negotia- tion and the subsequent ECP negotiation (described in [7]), during ECP negotiation the PPP peer MUST offer only the ciphersuite negotiated in EAP-TLS. This ensures that the PPP authenticator MUST accept the EAP- TLS negotiated ciphersuite in order for the conversation to proceed. Should the authenticator not accept the EAP-TLS negotiated cipher- suite, then the peer MUST send an LCP terminate and disconnect. Please note that as described in [17], it cannot be assumed that the PPP authenticator and EAP server are located on the same machine or that the authenticator understands the EAP-TLS conversation that has passed through it. Thus if the peer offers a ciphersuite other than the one negotiated in EAP-TLS there is no way for the authenticator to know how to respond correctly. 4.6. CCP negotiation TLS as described in [15] supports compression as well as ciphersuite negotiation. However, TLS only provides support for a limited number of compression types which do not overlap with the compression types used in PPP. As a result, during the EAP-TLS conversation the EAP end- points MUST NOT request or negotiate compression. Instead, the PPP Compression Control Protocol (CCP), described in [16] should be used to negotiate the desired compression scheme. 4.7. Examples In the case where the EAP-TLS mutual authentication is successful, the conversation will appear as follows: Authenticating Peer Authenticator ------------------- ------------- <- PPP LCP Request-EAP auth PPP LCP ACK-EAP auth -> <- PPP EAP-Request/ Identity PPP EAP-Response/ Identity (MyID) -> <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS Start) Aboba & Simon [Page 8] INTERNET-DRAFT 14 October 1997 PPP EAP-Response/ EAP-Type=EAP-TLS (TLS client_hello)-> <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS server_hello, TLS certificate, [TLS server_key_exchange,] [TLS certificate_request,] TLS server_hello_done) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS certificate, TLS client_key_exchange, [TLS certificate_verify,] TLS change_cipher_spec, TLS finished) -> <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS change_cipher_spec, TLS finished) PPP EAP-Response/ EAP-Type=EAP-TLS -> <- PPP EAP-Success PPP Authentication Phase complete, NCP Phase starts ECP negotiation CCP negotiation In the case where the server authenticates to the client successfully, but the client fails to authenticate to the server, the conversation will appear as follows: Authenticating Peer Authenticator ------------------- ------------- <- PPP LCP Request-EAP auth PPP LCP ACK-EAP auth -> <- PPP EAP-Request/ Identity PPP EAP-Response/ Identity (MyID) -> <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS Start) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS client_hello)-> <- PPP EAP-Request/ EAP-Type=EAP-TLS Aboba & Simon [Page 9] INTERNET-DRAFT 14 October 1997 (TLS server_hello, TLS certificate, [TLS server_key_exchange,] TLS certificate_request, TLS server_hello_done) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS certificate, TLS client_key_exchange, TLS certificate_verify, TLS change_cipher_spec, TLS finished) -> <- PPP EAP-Request EAP-Type=EAP-TLS (TLS Alert message) PPP EAP-Response/ EAP-Type=EAP-TLS -> <- PPP EAP-Failure (User Disconnected) In the case where server authentication is unsuccessful, the conversa- tion will appear as follows: Authenticating Peer Authenticator ------------------- ------------- <- PPP LCP Request-EAP auth PPP LCP ACK-EAP auth -> <- PPP EAP-Request/ Identity PPP EAP-Response/ Identity (MyID) -> <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS Start) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS client_hello)-> <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS server_hello, TLS certificate, [TLS server_key_exchange,] [TLS certificate_request,] TLS server_hello_done) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS certificate, TLS client_key_exchange, [TLS certificate_verify,] TLS change_cipher_spec, TLS finished) -> <- PPP EAP-Request/ Aboba & Simon [Page 10] INTERNET-DRAFT 14 October 1997 EAP-Type=EAP-TLS (TLS change_cipher_spec, TLS finished) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS Alert message) -> <- PPP EAP-Failure (User Disconnected) In the case where a previously established session is being resumed, and both sides authenticate successfully, the conversation will appear as follows: Authenticating Peer Authenticator ------------------- ------------- <- PPP LCP Request-EAP auth PPP LCP ACK-EAP auth -> <- PPP EAP-Request/ Identity PPP EAP-Response/ Identity (MyID) -> <- PPP EAP-Request/ EAP-Request/ EAP-Type=EAP-TLS (TLS Start) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS client_hello)-> <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS server_hello, TLS change_cipher_spec, TLS finished) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS change_cipher_spec, TLS finished) -> <- PPP EAP-Success PPP Authentication Phase complete, NCP Phase starts ECP negotiation CCP negotiation In the case where a previously established session is being resumed, and the server authenticates to the client successfully but the client fails to authenticate to the server, the conversation will appear as follows: Authenticating Peer Authenticator Aboba & Simon [Page 11] INTERNET-DRAFT 14 October 1997 ------------------- ------------- <- PPP LCP Request-EAP auth PPP LCP ACK-EAP auth -> <- PPP EAP-Request/ Identity PPP EAP-Response/ Identity (MyID) -> <- PPP EAP-Request/ EAP-Request/ EAP-Type=EAP-TLS (TLS Start) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS client_hello) -> <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS server_hello, TLS change_cipher_spec, TLS finished) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS change_cipher_spec, TLS finished) -> <- PPP EAP-Request EAP-Type=EAP-TLS (TLS Alert message) PPP EAP-Response EAP-Type=EAP-TLS -> <- PPP EAP-Failure (User Disconnected) In the case where a previously established session is being resumed, and the server authentication is unsuccessful, the conversation will appear as follows: Authenticating Peer Authenticator ------------------- ------------- <- PPP LCP Request-EAP auth PPP LCP ACK-EAP auth -> <- PPP EAP-Request/ Identity PPP EAP-Response/ Identity (MyID) -> <- PPP EAP-Request/ EAP-Request/ EAP-Type=EAP-TLS (TLS Start) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS client_hello)-> Aboba & Simon [Page 12] INTERNET-DRAFT 14 October 1997 <- PPP EAP-Request/ EAP-Type=EAP-TLS (TLS server_hello, TLS change_cipher_spec, TLS finished) PPP EAP-Response/ EAP-Type=EAP-TLS (TLS Alert message) -> <- PPP EAP-Failure (User Disconnected) 5. Detailed description of the EAP-TLS protocol 5.1. PPP EAP TLS Packet Format A summary of the PPP EAP TLS Request/Response packet format is shown below. The fields are transmitted from left to right. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Code | Identifier | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Data ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Code 1 - Request 2 - Response Identifier The identifier field is one octet and aids in matching responses with requests. Length The Length field is two octets and indicates the length of the EAP packet including the Code, Identifier, Length, Type, and Data fields. Octets outside the range of the Length field should be treated as Data Link Layer padding and should be ignored on recep- tion. Type ? - EAP TLS Data The format of the Data field is determined by the Code field. Aboba & Simon [Page 13] INTERNET-DRAFT 14 October 1997 5.2. PPP EAP TLS Request Packet A summary of the PPP EAP TLS Request packet format is shown below. The fields are transmitted from left to right. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Code | Identifier | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | TLS data... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Code 1 Identifier The identifier field is one octet and aids in matching responses with requests. The identifier field MUST be changed on each Request packet. Length The Length field is two octets and indicates the length of the EAP packet including the Code, Identifier, Length, Type, and TLS Response fields. Type ? - EAP TLS TLS data The TLS data consists of the encapsulated TLS packet in TLS record format. 5.3. PPP EAP TLS Response Packet A summary of the PPP EAP TLS Response packet format is shown below. The fields are transmitted from left to right. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Code | Identifier | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | TLS Data... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Code Aboba & Simon [Page 14] INTERNET-DRAFT 14 October 1997 2 Identifier The identifier field is one octet and MUST match the Identifier field from the corresponding request. Length The Length field is two octets and indicates the length of the EAP packet including the Code, Identifier, Length, Type, and TLS data fields. Type ? - EAP TLS TLS data The TLS data consists of the encapsulated TLS packet in TLS record format. 6. Security issues 6.1. Certificate revocation Since the EAP server is on the Internet during the EAP conversation, the EAP server is capable of following a certificate chain or verify- ing whether the peer's certificate has been revoked. In contrast, the peer may or may not have Internet connectivity, and thus while it can validate the EAP server's certificate based on a pre-configured set of CAs, it may not be able to follow a certificate chain or verify whether the EAP server's certificate has been revoked. In the case where the peer is initiating a voluntary Layer 2 tunnel using PPTP or L2TP, the peer will typically already have a PPP inter- face and Internet connectivity established at the time of tunnel ini- tiation. As a result, during the EAP conversation it is capable of checking for certificate revocation. However, in the case where the peer is initiating an intial PPP con- versation, it will not have Internet connectivity and is therefore not capable of checking for certificate revocation until after NCP negoti- ation completes and the peer has access to the Internet. In this case, the peer SHOULD check for certificate revocation after connecting to the Internet. 6.2. Separation of the EAP server and PPP authenticator As a result of the EAP-TLS conversation, the EAP endpoints will mutu- ally authenticate, negotiate a ciphersuite, and derive a session key Aboba & Simon [Page 15] INTERNET-DRAFT 14 October 1997 for subsequent use in PPP encryption. Since the peer and EAP client reside on the same machine, it is necessary for the EAP client module to pass the session key to the PPP encryption module. The situation may be more complex on the PPP authenticator. As noted in [17], the PPP authenticator may or may not reside on the same machine as the EAP server. For example, when RADIUS/EAP is used, the EAP server may be a backend security server, or a module residing on the RADIUS server. In the case where the EAP server and PPP authenticator reside on dif- ferent machines, there are several implications for security. Firstly, the mutual authentication defined in EAP-TLS will occur between the peer and the EAP server, not between the peer and the authenticator. This means that as a result of the EAP-TLS conversation, it is not possible for the peer to validate the identity of the NAS or tunnel server that it is speaking to. As described in [17], when EAP/RADIUS is used to encapsulate EAP pack- ets, the Signature attribute is required in EAP/RADIUS Access-Requests sent from the NAS or tunnel server to the RADIUS server. Since the Signature attribute involves a keyed-MD5 hash, it is possible for the RADIUS server to verify the integrity of the Access-Request as well as the NAS or tunnel server's identity. Similarly, Access-Challenge pack- ets sent from the RADIUS server to the NAS are also authenticated and integrity protected using a keyed-MD5 hash, enabling the NAS or tunnel server to determine the integrity of the packet and verify the iden- tity of the RADIUS server. Moreover, EAP-TLS packets in transit are integrity protected and authenticated end-to-end via TLS mechanisms, so that they cannot be successfully modified by a rogue NAS or tunnel server. The second issue that arises in the case of an EAP server and PPP authenticator residing on different machines is that the session key negotiated between the peer and EAP server will need to be transmitted to the authenticator. Therefore a mechanism needs to be provided to transmit the session key from the EAP server to the authenticator or tunnel server that needs to use the key. The specification of this transit mechanism is outside the scope of this document. 6.3. Relationship of PPP encryption to other security mechanisms PPP encryption currently plays an important role in the securing of Layer 2 tunneling protocols such as PPTP, described in [13], and L2TP, described in [14]. While it may be envisaged that security mechanisms such as IPSEC will eventually become ubiquitous, it will take some time for vendors to add IPSEC capabilities to their devices, and in any case legacy authenticator devices or routers may not be able to support IPSEC without being upgraded. As a result, it is likely that non-IPSEC capable devices will persist in operational networks for quite some time. Aboba & Simon [Page 16] INTERNET-DRAFT 14 October 1997 In an environment where IPSEC is not ubiquitous, in Layer 2 tunneling protocols a role remains for PPP encryption. Since with mandatory tun- neling a PPP peer cannot tell whether its packets are being tunneled, let alone whether the authenticator is securing the tunnel, if secu- rity is required then the client must make its own arrangements. In the case where all endpoints cannot be relied upon to implement IPSEC, TLS, or another suitable security protocol, then PPP encryption pro- vides a very convenient means to ensure the privacy of packets tran- siting between the client and the tunnel server. There also may be circumstances in which PPP encryption may be desir- able even if IPSEC is available. Routers implementing Network Address Translation (NAT) are now growing rapidly in popularity. Where NAT is turned on, IPSEC cannot be used to secure the outer layer of a client- initiated layer 2 tunnel, since the address translated packet will then fail the authentication check. By contrast, Layer 2 tunnels uti- lizing PPP encryption may pass unimpeded through a NAT. 7. Copyright notice Copyright (C) The Internet Society, 1997. All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implmentation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this docu- ment itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Inter- net organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MER- CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 8. Acknowledgments Thanks to Terence Spies, Glen Zorn and Narendra Gidwani of Microsoft for useful discussions of this problem space. Aboba & Simon [Page 17] INTERNET-DRAFT 14 October 1997 9. References [1] Simpson, W., Editor, "The Point-to-Point Protocol (PPP)." STD 51, RFC 1661, Daydreamer, July 1994. [2] Sklower, K., Lloyd, B., McGregor, G., Carr, D., and T. Coradetti, "The PPP Multilink Protocol (MP)." RFC 1990, UC Berkeley, August 1996. [3] Simpson, W., Editor, "PPP LCP Extensions." RFC 1570, Daydreamer, January 1994. [4] R. Rivest, S. Dusse. "The MD5 Message-Digest Algorithm." RFC 1321, MIT Laboratory for Computer Science, RSA Data Security Inc., April 1992. [5] L. J. Blunk, J. R. Vollbrecht. "PPP Extensible Authentication Protocol (EAP)." Work in progress, draft-ietf-pppext-eap-auth-02.txt, Merit Network, Inc., June 1996. [6] W. T. Whelan, "PPP EAP RSA Public Key Authentication Protocol." Work in progress, draft-ietf-pppext-eaprsa-04.txt, Cabletron Systems, February 1997. [7] Meyer, G., "The PPP Encryption Protocol (ECP)." RFC 1968, Spider Systems. June 1996 [8] National Bureau of Standards, "Data Encryption Standard." FIPS PUB 46 (January 1977). [9] National Bureau of Standards, "DES Modes of Operation." FIPS PUB 81 (December 1980). [10] K. Sklower, G. Meyer. "The PPP DES Encryption Protocol, Version 2 (DESE-bis)" Work in progress, draft-ietf-pppext-des-encrypt- v2-00.txt, University of California, Berkeley, Shiva, July 1997. [11] K. Hummert. "The PPP Triple-DES Encryption Protocol (3DESE)" Work in progress, draft-ietf-pppext-3des-encrypt-00.txt, Nentec GmbH, July 1997. [12] S. Bradner. "Key words for use in RFCs to Indicate Requirement Levels." RFC 2119, Harvard University, March 1997. [13] K. Hamzeh, G. S. Pall, J. Taarud, W. Verthein, W. A. Little. "Point-to-Point Tunneling Protocol -- PPTP." Internet draft (work in progress), draft-ietf-pppext-pptp-02.txt, Ascend Communications, Microsoft, Copper Mountain Networks, U.S. Robotics, July 1997. [14] K. Hamzeh, T. Kolar, M. Littlewood, G. S. Pall, B. Palter, J. Taarud, W. M. Townsley, A. Valencia, W. Verthein. "Layer Two Tunnel- ing Protocol L2TP." Internet draft (work in progress) draft-ietf- pppext-l2tp-06.txt, Ascend Communications, Cisco Systems, Microsoft, Copper Mountain Networks, IBM, U.S. Robotics, August 1997. Aboba & Simon [Page 18] INTERNET-DRAFT 14 October 1997 [15] T. Dierks, C. Allen. "The TLS Protocol Version 1.0." Internet draft (work in progress) draft-ietf-tls-protocol-03.txt, Consensus Development, May 1997. [16] D. Rand. "The PPP Compression Control Protocol." RFC 1962, Nov- ell, June 1996. [17] P. Calhoun, A.C. Rubens, B. Aboba. "Extensible Authentication Protocol Support in RADIUS." Internet draft (work in progress), draft- ietf-radius-eap-02.txt, US Robotics Access Corp., Merit Network, Microsoft, May, 1997. 10. Authors' Addresses Bernard Aboba Microsoft Corporation One Microsoft Way Redmond, WA 98052 Phone: 425-936-6605 EMail: bernarda@microsoft.com Dan Simon Microsoft Corporation One Microsoft Way Redmond, WA 98052 Phone: 425-936-6711 EMail: dansimon@microsoft.com Aboba & Simon [Page 19]