home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Internet Info 1997 December
/
Internet_Info_CD-ROM_Walnut_Creek_December_1997.iso
/
drafts
/
draft_ietf_i
/
draft-ietf-intserv-mib-06.txt
< prev
next >
Wrap
Text File
|
1997-05-23
|
37KB
|
1,683 lines
Internet Draft Integrated Services MIB June 1997
Integrated Services Management Information Base
draft-ietf-intserv-mib-06.txt
Thu May 22 10:17:36 PDT 1997
Fred Baker
Cisco Systems
519 Lado Drive
Santa Barbara, California 93111
fred@cisco.com
John Krawczyk
ArrowPoint Communications
235 Littleton Road
Westford, Massachusetts 01886
jj@BayNetworks.com
1. Status of this Memo
This document is an Internet Draft. Internet Drafts are
working documents of the Internet Engineering Task Force
(IETF), its Areas, and its Working Groups. Note that other
groups may also distribute working documents as Internet
Drafts.
Internet Drafts are draft documents valid for a maximum of six
months. Internet Drafts may be updated, replaced, or obsoleted
by other documents at any time. It is not appropriate to use
Internet Drafts as reference material or to cite them other
than as a "working draft" or "work in progress."
Please check the I-D abstract listing contained in each
Internet Draft directory to learn the current status of this
or any other Internet Draft.
Baker and Krawczyk Expires December 1997 [Page 1]
Internet Draft Integrated Services MIB June 1997
2. Abstract
This memo defines a portion of the Management Information Base
(MIB) for use with network management protocols in TCP/IP-
based internets. In particular, it defines objects for
managing the the interface attributes defined in the
Integrated Services Model. Comments should be made to the
Integrated Services Working Group, int-serv@isi.edu.
This memo does not, in its draft form, specify a standard for
the Internet community.
Baker and Krawczyk Expires December 1997 [Page 2]
Internet Draft Integrated Services MIB June 1997
3. The SNMPv2 Network Management Framework
The SNMPv2 Network Management Framework consists of four major
components. They are:
o RFC 1441 which defines the SMI, the mechanisms used for
describing and naming objects for the purpose of
management.
o RFC 1213 defines MIB-II, the core set of managed objects
for the Internet suite of protocols.
o RFC 1445 which defines the administrative and other
architectural aspects of the framework.
o RFC 1448 which defines the protocol used for network
access to managed objects.
The Framework permits new objects to be defined for the
purpose of experimentation and evaluation.
3.1. Object Definitions
Managed objects are accessed via a virtual information store,
termed the Management Information Base or MIB. Objects in the
MIB are defined using the subset of Abstract Syntax Notation
One (ASN.1) defined in the SMI. In particular, each object
type is named by an OBJECT IDENTIFIER, an administratively
assigned name. The object type together with an object
instance serves to uniquely identify a specific instantiation
of the object. For human convenience, we often use a textual
string, termed the descriptor, to refer to the object type.
4. Overview
4.1. Textual Conventions
Several new data types are introduced as a textual convention
in this MIB document. These textual conventions enhance the
readability of the specification and can ease comparison with
other specifications if appropriate. It should be noted that
the introduction of the these textual conventions has no
effect on either the syntax nor the semantics of any managed
Baker and Krawczyk Expires December 1997 [Page 3]
Internet Draft Integrated Services MIB June 1997
objects. The use of these is merely an artifact of the
explanatory method used. Objects defined in terms of one of
these methods are always encoded by means of the rules that
define the primitive type. Hence, no changes to the SMI or
the SNMP are necessary to accommodate these textual
conventions which are adopted merely for the convenience of
readers and writers in pursuit of the elusive goal of clear,
concise, and unambiguous MIB documents.
4.2. Structure of MIB
The MIB is composed of the following sections:
Integrated Services
Interface Attributes Table
Interface Flow Table
Baker and Krawczyk Expires December 1997 [Page 4]
Internet Draft Integrated Services MIB June 1997
5. Definitions
INTEGRATED-SERVICES-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32,
Gauge32, Integer32, experimental FROM SNMPv2-SMI
TimeInterval, TEXTUAL-CONVENTION, RowStatus,
TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
ifIndex, InterfaceIndex FROM IF-MIB;
-- This MIB module uses the extended OBJECT-TYPE macro as
-- defined in [9].
intSrv MODULE-IDENTITY
LAST-UPDATED "9511030500Z" -- Thu May 22 10:17:36 PDT 1997
ORGANIZATION "IETF Integrated Services Working Group"
CONTACT-INFO
" Fred Baker
Postal: Cisco Systems
519 Lado Drive
Santa Barbara, California 93111
Tel: +1 805 681 0115
E-Mail: fred@cisco.com
John Krawczyk
Postal: ArrowPoint Communications
235 Littleton Road
Westford, Massachusetts 01886
Tel: +1 508 692 5875
E-Mail: jjk@tiac.net"
DESCRIPTION
"The MIB module to describe the Integrated Services
Protocol"
::= { experimental 72 }
intSrvObjects OBJECT IDENTIFIER ::= { intSrv 1 }
intSrvNotifications OBJECT IDENTIFIER ::= { intSrv 2 }
intSrvConformance OBJECT IDENTIFIER ::= { intSrv 3 }
-- Textual Conventions
--
Baker and Krawczyk Expires December 1997 [Page 5]
Internet Draft Integrated Services MIB June 1997
SessionNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Session Number convention is used for
numbers identifying sessions or saved PATH or
RESV information. It is a number in the range
returned by a TestAndIncr variable, having no
protocol meaning whatsoever but serving instead
as simple identifier.
The alternative was a very complex instance or
instance object that became unwieldy."
SYNTAX INTEGER (0..2147483647)
Protocol ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The value of the IP Protocol field of an IP
Datagram Header. This identifies the protocol
layer above IP. For example, the value 6 is
used for TCP and the value 17 is used for UDP.
The values of this field are defined in the As-
signed Numbers RFC."
SYNTAX INTEGER (1..255)
SessionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of the C-Type field of a Session ob-
ject, as defined in the RSVP specification.
This value determines the lengths of octet
strings and use of certain objects such as the
'port' variables. If the C-Type calls for an
IP6 address, one would expect all source, des-
tination, and next/previous hop addresses to be
16 bytes long, and for the ports to be UDP/TCP
port numbers, for example."
SYNTAX INTEGER (1..255)
Baker and Krawczyk Expires December 1997 [Page 6]
Internet Draft Integrated Services MIB June 1997
Port ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The value of the UDP or TCP Source or Destina-
tion Port field, a virtual destination port or
generalized port identifier used with the IPSEC
Authentication Header or Encapsulating Security
Payload, or other session discriminator. If it
is not used, the value should be of length 0.
This pair, when coupled with the IP Addresses
of the source and destination system and the IP
protocol field, uniquely identifies a data
stream."
SYNTAX OCTET STRING (SIZE(2..4))
MessageSize ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The size of a message in bytes. This is used
to specify the minimum and maximum size of a
message along an integrated services route."
SYNTAX INTEGER (0..'7FFFFFFF'h)
BitRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The rate, in bits/second, that data may move
in the context. Applicable contexts minimally
include the speed of an interface or virtual
circuit, the data rate of a (potentially aggre-
gated) data flow, or the data rate to be allo-
cated for use by a flow."
SYNTAX INTEGER (0..'7FFFFFFF'h)
Baker and Krawczyk Expires December 1997 [Page 7]
Internet Draft Integrated Services MIB June 1997
BurstSize ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The number of octets of IP Data, including IP
Headers, that a stream may send without concern
for policing."
SYNTAX INTEGER (0..'7FFFFFFF'h)
QosService ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The class of service in use by a flow."
SYNTAX INTEGER {
bestEffort (1), -- Best Effort Service
guaranteedDelay (2), -- Guaranteed Delay
controlledLoad (5) -- Controlled Load
}
Baker and Krawczyk Expires December 1997 [Page 8]
Internet Draft Integrated Services MIB June 1997
-- The Integrated Services Interface Attributes Database contains
-- information about resources allocated by resource reservation
-- protocols, such as RSVP and ST-II.
intSrvIfAttribTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntSrvIfAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The reservable attributes of the system's in-
terfaces."
::= { intSrvObjects 1 }
intSrvIfAttribEntry OBJECT-TYPE
SYNTAX IntSrvIfAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The reservable attributes of a given inter-
face."
INDEX { ifIndex }
::= { intSrvIfAttribTable 1 }
IntSrvIfAttribEntry ::=
SEQUENCE {
intSrvIfAttribAllocatedBits BitRate,
intSrvIfAttribMaxAllocatedBits BitRate,
intSrvIfAttribAllocatedBuffer BurstSize,
intSrvIfAttribFlows Gauge32,
intSrvIfAttribPropagationDelay Integer32,
intSrvIfAttribStatus RowStatus
}
intSrvIfAttribAllocatedBits OBJECT-TYPE
SYNTAX BitRate
UNITS "Bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bits/second currently allocated
to reserved sessions on the interface."
::= { intSrvIfAttribEntry 1 }
Baker and Krawczyk Expires December 1997 [Page 9]
Internet Draft Integrated Services MIB June 1997
intSrvIfAttribMaxAllocatedBits OBJECT-TYPE
SYNTAX BitRate
UNITS "Bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of bits/second that may be
allocated to reserved sessions on the inter-
face."
::= { intSrvIfAttribEntry 2 }
intSrvIfAttribAllocatedBuffer OBJECT-TYPE
SYNTAX BurstSize
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of buffer space required to hold
the simultaneous burst of all reserved flows on
the interface."
::= { intSrvIfAttribEntry 3 }
intSrvIfAttribFlows OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reserved flows currently active
on this interface. A flow can be created ei-
ther from a reservation protocol (such as RSVP
or ST-II) or via configuration information."
::= { intSrvIfAttribEntry 4 }
Baker and Krawczyk Expires December 1997 [Page 10]
Internet Draft Integrated Services MIB June 1997
intSrvIfAttribPropagationDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of propagation delay that this in-
terface introduces in addition to that intro-
diced by bit propagation delays."
DEFVAL { 0 }-- by default, interfaces are presumed to add no extra delays
::= { intSrvIfAttribEntry 5 }
intSrvIfAttribStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"'active' on interfaces that are configured for
RSVP."
::= { intSrvIfAttribEntry 6 }
Baker and Krawczyk Expires December 1997 [Page 11]
Internet Draft Integrated Services MIB June 1997
-- The Integrated Services Active Flows Database
-- lists all flows active on an outgoing interface, including
-- relevant attributes.
intSrvFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the reserved flows us-
ing the system's interfaces."
::= { intSrvObjects 2 }
intSrvFlowEntry OBJECT-TYPE
SYNTAX IntSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the use of a given in-
terface by a given flow. The counter
intSrvFlowPoliced starts counting at the in-
stallation of the flow."
INDEX { intSrvFlowNumber }
::= { intSrvFlowTable 1 }
Baker and Krawczyk Expires December 1997 [Page 12]
Internet Draft Integrated Services MIB June 1997
IntSrvFlowEntry ::=
SEQUENCE {
intSrvFlowNumber SessionNumber,
intSrvFlowType SessionType,
intSrvFlowOwner INTEGER,
intSrvFlowDestAddr OCTET STRING,
intSrvFlowSenderAddr OCTET STRING,
intSrvFlowDestAddrLength INTEGER,
intSrvFlowSenderAddrLength INTEGER,
intSrvFlowProtocol Protocol,
intSrvFlowDestPort Port,
intSrvFlowPort Port,
intSrvFlowInterface InterfaceIndex,
intSrvFlowIfAddr OCTET STRING,
intSrvFlowRate BitRate,
intSrvFlowBurst BurstSize,
intSrvFlowWeight Integer32,
intSrvFlowQueue Integer32,
intSrvFlowMinTU MessageSize,
intSrvFlowMaxTU MessageSize,
intSrvFlowDontAsk TimeInterval,
intSrvFlowPoliced Counter32,
intSrvFlowDiscard TruthValue,
intSrvFlowService QosService,
intSrvFlowOrder INTEGER,
intSrvFlowStatus RowStatus,
intSrvFlowNewIndex TestAndIncr
}
intSrvFlowNumber OBJECT-TYPE
SYNTAX SessionNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this flow. This is for SNMP In-
dexing purposes only and has no relation to any
protocol value."
::= { intSrvFlowEntry 1 }
Baker and Krawczyk Expires December 1997 [Page 13]
Internet Draft Integrated Services MIB June 1997
intSrvFlowType OBJECT-TYPE
SYNTAX SessionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow
information, etc)."
::= { intSrvFlowEntry 2 }
intSrvFlowOwner OBJECT-TYPE
SYNTAX INTEGER {
rsvp(1),
management(2),
other(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The process that installed this flow in the
queue policy database."
::= { intSrvFlowEntry 3 }
intSrvFlowDestAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination address used by all senders in
this session. This object may not be changed
when the value of the RowStatus object is 'ac-
tive'."
::= { intSrvFlowEntry 4 }
Baker and Krawczyk Expires December 1997 [Page 14]
Internet Draft Integrated Services MIB June 1997
intSrvFlowSenderAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source address of the sender selected by
this reservation. The value of all zeroes in-
dicates 'all senders'. This object may not be
changed when the value of the RowStatus object
is 'active'."
::= { intSrvFlowEntry 5 }
intSrvFlowDestAddrLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits. This
object may not be changed when the value of the
RowStatus object is 'active'."
::= { intSrvFlowEntry 6 }
intSrvFlowSenderAddrLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits. This
object may not be changed when the value of the
RowStatus object is 'active'."
::= { intSrvFlowEntry 7 }
Baker and Krawczyk Expires December 1997 [Page 15]
Internet Draft Integrated Services MIB June 1997
intSrvFlowProtocol OBJECT-TYPE
SYNTAX Protocol
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Protocol used by a session. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'."
::= { intSrvFlowEntry 8 }
intSrvFlowDestPort OBJECT-TYPE
SYNTAX Port
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP or TCP port number used as a destina-
tion port for all senders in this session. If
the IP protocol in use, specified by
intSrvResvFwdProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'."
::= { intSrvFlowEntry 9 }
intSrvFlowPort OBJECT-TYPE
SYNTAX Port
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP or TCP port number used as a source
port for this sender in this session. If the
IP protocol in use, specified by
intSrvResvFwdProtocol is 50 (ESP) or 51 (AH),
this represents a generalized port identifier
(GPI). A value of zero indicates that the IP
protocol in use does not have ports. This ob-
ject may not be changed when the value of the
RowStatus object is 'active'."
::= { intSrvFlowEntry 10 }
Baker and Krawczyk Expires December 1997 [Page 16]
Internet Draft Integrated Services MIB June 1997
intSrvFlowInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex value of the interface on which
this reservation exists."
::= { intSrvFlowEntry 11 }
intSrvFlowIfAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address on the ifEntry on which this
reservation exists. This is present primarily
to support those interfaces which layer multi-
ple IP Addresses on the interface."
::= { intSrvFlowEntry 12 }
intSrvFlowRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Reserved Rate of the sender's data stream.
If this is a Controlled Load service flow, this
rate is derived from the Tspec rate parameter
(r). If this is a Guaranteed service flow,
this rate is derived from the Rspec clearing
rate parameter (R)."
::= { intSrvFlowEntry 13 }
Baker and Krawczyk Expires December 1997 [Page 17]
Internet Draft Integrated Services MIB June 1997
intSrvFlowBurst OBJECT-TYPE
SYNTAX BurstSize
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the largest burst expected from
the sender at a time.
If this is less than the sender's advertised
burst size, the receiver is asking the network
to provide flow pacing beyond what would be
provided under normal circumstances. Such pac-
ing is at the network's option."
::= { intSrvFlowEntry 14 }
intSrvFlowWeight OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight used to prioritize the traffic.
Note that the interpretation of this object is
implementation-specific, as implementations
vary in their use of weighting procedures."
::= { intSrvFlowEntry 15 }
intSrvFlowQueue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the queue used by this traffic.
Note that the interpretation of this object is
implementation-specific, as implementations
vary in their use of queue identifiers."
::= { intSrvFlowEntry 16 }
Baker and Krawczyk Expires December 1997 [Page 18]
Internet Draft Integrated Services MIB June 1997
intSrvFlowMinTU OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size."
::= { intSrvFlowEntry 17 }
intSrvFlowMaxTU OBJECT-TYPE
SYNTAX MessageSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum datagram size for this flow that
will conform to the traffic specification. This
value cannot exceed the MTU of the interface."
::= { intSrvFlowEntry 18 }
intSrvFlowDontAsk OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A period of time, measured in hundredths of a
second, during which the agent is precluded
from sending a newFlow notification for this
conversation.
If an authorizing application leaves
intSrvFlowStatus in a state other than neither
consider the flow active for admission or queu-
ing purposes, or re-request authorization to
install it, until the indicated amount of time
has elapsed."
::= { intSrvFlowEntry 19 }
Baker and Krawczyk Expires December 1997 [Page 19]
Internet Draft Integrated Services MIB June 1997
intSrvFlowPoliced OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets policed since the incep-
tion of the flow's service."
::= { intSrvFlowEntry 20 }
intSrvFlowDiscard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If 'true', the flow is to incur loss when
traffic is policed. If 'false', policed traff-
ic is treated as best effort traffic."
DEFVAL { false } -- traffic is, by default, treated as best effort
::= { intSrvFlowEntry 21 }
intSrvFlowService OBJECT-TYPE
SYNTAX QosService
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QoS service being applied to this flow."
::= { intSrvFlowEntry 22 }
intSrvFlowOrder OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"In the event of ambiguity, the order in which
the classifier should make its comparisons.
The row with intSrvFlowOrder=0 is tried first,
and comparisons proceed in the order of in-
creasing value. Non-serial implementations of
the classifier should emulate this behavior."
::= { intSrvFlowEntry 23 }
Baker and Krawczyk Expires December 1997 [Page 20]
Internet Draft Integrated Services MIB June 1997
intSrvFlowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"'active' for all active flows. This object
may be used to install static classifier infor-
mation, delete classifier information, or au-
thorize such."
::= { intSrvFlowEntry 24 }
intSrvFlowNewIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to assign values to
intSrvFlowNumber as described in 'Textual Con-
ventions for SNMPv2'. The network manager
reads the object, and then writes the value
back in the SET that creates a new instance of
intSrvFlowEntry. If the SET fails with the
code 'inconsistentValue', then the process must
be repeated; If the SET succeeds, then the ob-
ject is incremented, and the new instance is
created according to the manager's directions."
::= { intSrvFlowEntry 25 }
Baker and Krawczyk Expires December 1997 [Page 21]
Internet Draft Integrated Services MIB June 1997
-- conformance information
intSrvGroups OBJECT IDENTIFIER ::= { intSrvConformance 1 }
intSrvCompliances OBJECT IDENTIFIER ::= { intSrvConformance 2 }
-- compliance statements
Baker and Krawczyk Expires December 1997 [Page 22]
Internet Draft Integrated Services MIB June 1997
intSrvCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement "
MODULE -- this module
MANDATORY-GROUPS { intSrvIfAttribGroup, intSrvFlowsGroup }
OBJECT intSrvFlowType
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowOwner
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowDestAddr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowSenderAddr
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowDestAddrLength
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowSenderAddrLength
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowProtocol
MIN-ACCESS read-only
Baker and Krawczyk Expires December 1997 [Page 23]
Internet Draft Integrated Services MIB June 1997
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowDestPort
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowPort
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowInterface
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowRate
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowBurst
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowWeight
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowQueue
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
Baker and Krawczyk Expires December 1997 [Page 24]
Internet Draft Integrated Services MIB June 1997
OBJECT intSrvFlowMinTU
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowMaxTU
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowDontAsk
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
OBJECT intSrvFlowStatus
MIN-ACCESS read-only
DESCRIPTION
"read-create access is not required. This may be
read-only."
::= { intSrvCompliances 1 }
intSrvIfAttribGroup OBJECT-GROUP
OBJECTS {
intSrvIfAttribAllocatedBits, intSrvIfAttribMaxAllocatedBits,
intSrvIfAttribAllocatedBuffer, intSrvIfAttribFlows,
intSrvIfAttribPropagationDelay, intSrvIfAttribStatus
}
STATUS current
DESCRIPTION
"These objects are required for Systems sup-
porting the Integrated Services Architecture."
::= { intSrvGroups 1 }
Baker and Krawczyk Expires December 1997 [Page 25]
Internet Draft Integrated Services MIB June 1997
intSrvFlowsGroup OBJECT-GROUP
OBJECTS {
intSrvFlowType, intSrvFlowOwner, intSrvFlowDestAddr,
intSrvFlowSenderAddr, intSrvFlowDestAddrLength,
intSrvFlowSenderAddrLength, intSrvFlowProtocol,
intSrvFlowDestPort, intSrvFlowPort, intSrvFlowInterface,
intSrvFlowDontAsk, intSrvFlowRate, intSrvFlowBurst,
intSrvFlowWeight, intSrvFlowQueue, intSrvFlowMinTU,
intSrvFlowDiscard, intSrvFlowPoliced, intSrvFlowService,
intSrvFlowIfAddr, intSrvFlowOrder, intSrvFlowStatus,
intSrvFlowNewIndex
}
STATUS current
DESCRIPTION
"These objects are required for Systems sup-
porting the Integrated Services Architecture."
::= { intSrvGroups 2 }
END
Baker and Krawczyk Expires December 1997 [Page 26]
Internet Draft Integrated Services MIB June 1997
6. Security Issues
Security issues for this MIB are entirely covered by the SNMP
Security Architecture, and have not been expanded within the
contents of this MIB.
7. Authors' Addresses
Fred Baker
Postal: Cisco Systems
519 Lado Drive
Santa Barbara, California 93111
Tel: +1 805 681 0115
E-Mail: fred@cisco.com
John Krawczyk
Postal: ArrowPoint Communications
235 Littleton Road
Westford, Massachusetts 01886
Tel: +1 508 692 5875
E-Mail: jjk@tiac.net"
8. Acknowledgements
This document was produced by the Integrated Services Working
Group.
Baker and Krawczyk Expires December 1997 [Page 27]
Internet Draft Integrated Services MIB June 1997
9. References
[1] M.T. Rose (editor), Management Information Base for
Network Management of TCP/IP-based internets, Internet
Working Group Request for Comments 1213. Network
Information Center, SRI International, Menlo Park,
California, (May, 1990).
[2] Information processing systems - Open Systems
Interconnection - Specification of Abstract Syntax
Notation One (ASN.1), International Organization for
Standardization. International Standard 8824, (December,
1987).
[3] Information processing systems - Open Systems
Interconnection - Specification of Basic Encoding Rules
for Abstract Notation One (ASN.1), International
Organization for Standardization. International Standard
8825, (December, 1987).
Baker and Krawczyk Expires December 1997 [Page 28]
Internet Draft Integrated Services MIB June 1997
Table of Contents
1 Status of this Memo ................................... 1
2 Abstract .............................................. 2
3 The SNMPv2 Network Management Framework ............... 3
3.1 Object Definitions .................................. 3
4 Overview .............................................. 3
4.1 Textual Conventions ................................. 3
4.2 Structure of MIB .................................... 4
5 Definitions ........................................... 5
5.2 Interface Attributes Database ....................... 8
5.3 Integrated Services Interface Flows Database ........ 11
6 Security Issues ....................................... 27
7 Authors' Addresses .................................... 27
8 Acknowledgements ...................................... 27
9 References ............................................ 28
Baker and Krawczyk Expires December 1997 [Page 29]