113 Windows is not using the correct system registry.\nThis can occur if the Zip Rescue Disk is not present while the computer is starting.\n\nIt is strongly reommended that you shutdown, then restart your system\nwith the Rescue Zip Disk inserted.\n\nIf you continue using the Recovery Wizard, you may cause damage to your system registry.\n\nAre you sure you want to continue?
118 Norton Disk Doctor launched successfully.
119 Norton Disk Doctor did not run successfully.
130 Rescue Recovery Wizard
131 Successfully restored the CMOS.
132 Unable to check the CMOS information. Click Next to continue.
133 The CMOS information matches that stored on the Norton Zip Rescue set. Click Next to continue.\n
134 The CMOS information does not match that stored on the Norton Zip Rescue set. Click Restore to copy the saved CMOS information from the rescue set.
135 Click Run UnErase Wizard to start UnErase Wizard. If UnErase Wizard recovers any files, you must restart your system.\n\nIf you have already run UnErase Wizard, and are still unable to start your computer, click Next to continue.
136 UnErase Wizard has not been installed or cannot be found. Click Next to continue.
137 Click Run NDD to start Norton Disk Doctor, then restart your system if recommended..\n\nIf you have already run Norton Disk Doctor, and are still unable to start your computer, click Next to continue.
138 Norton Disk Doctor has not been installed or cannot be found. Click Next to continue.
139 The boot record has not changed since you last updated your Rescue disk set. It is unlikely that this is the problem. Click Next to continue.
140 The boot record has changed since you last updated your Norton Zip Rescue set. Click Restore to copy the saved boot record from the rescue set.
141 Unable to check the boot record. Click Next to continue.
142 The partition table has not changed since you last updated your Norton Zip Rescue set. It is unlikely that this is the problem. Click Next to continue.
143 The partition table has changed since you last updated your Norton Zip Rescue set. Press Restore to copy the saved boot record from the rescue set.
144 Unable to check the partition table. Click Next to continue.
145 To restore the registry, click Restore.
146 Unable to find the backup registry file. Click Next to continue.
147 Failed to restore the partition table. Click Next to continue.
148 Successfully restored the partition table.
149 Failed to restore the boot record. Click Next to continue.
150 Successfully restored the boot record.
151 Successfully restored the registry.
152 Failed to restore the registry. Click Next to continue.
153 Successfully restored the startup files.
154 There was a problem restoring the startup files.\n AUTOEXEC.BAT - %s\n CONFIG.SYS - %s\n SYSTEM.INI - %s\n MSDOS.SYS - %s\n IO.SYS - %s
155 The startup files have changed since you last updated your Norton Zip Rescue set. Click Restore to copy the saved startup files (AUTOEXEC.BAT, CONFIG.SYS, MSDOS.SYS, IO.SYS, SYSTEM.INI) from the rescue set.
156 The startup files have not changed since you last updated your Norton Zip Rescue set. Click Next to continue.
157 Unable to check one or more of the startup files. Click Next to continue.
158 Unable to initialize the virus scanner.
159 STOP! *** MEMORY VIRUS DETECTED ! ***\nA virus was found in the memory of the computer. We STRONGLY recommend you shut down the computer and use a virus-removal program like Norton AntiVirus before continuing. Removing the virus may allow your system to start normally.
160 There was an error scanning for viruses.
161 Click Scan to find any viruses that may be infecting your system.
162 Unable to check the registry. Click Next to continue.
165 STOP! *** SYSTEM VIRUS DETECTED ! ***\nA virus was found in the system area of the computer. We STRONGLY recommend you shut down the computer and use a virus-removal program like Norton AntiVirus before continuing. Removing the virus may allow your system to start normally.
166 No viruses detected in the memory or system areas. Click Next to continue.
167 AUTOEXEC.SAV
168 CONFIG.SAV
169 SYSINI.SAV
170 Success
171 Failed
172 BOOTINFO.DAT
173 PARTINFO.DAT
174 CMOSINFO.DAT
175 REGISTRY.RSC
176 Norton UnErase did not run successfully.
177 Norton UnErase launched successfully.
178 MSDOS.SAV
179 Saved CMOS data is for another system.
180 Rescue Recovery Wizard cannot confirm that you started your computer from your Norton Zip Rescue disk.\n\nIf you started your computer from your Norton Zip Rescue disk, click Yes to continue. If you started your computer from your hard drive, not your Norton Zip Rescue disk, click No to exit.\n\nWould you like to continue?
185 Scanning system areas for viruses.
186 Scanning memory for viruses.
187 Restoring the registry. Please be patient, as this could take a few minutes.
189 BOOTGOOD.TXT
192 There was an error scanning the system areas for viruses. This may be due to a hardware problem with one or more of the system's drives.
193 Unable to load the virus scanner.\nNorton AntiVirus SE is included with Norton Utilities and installed by default. If you performed a custom installation and chose not to install Norton AntiVirus SE, Rescue Recovery Wizard cannot scan for viruses.
194 Unable to launch the application.
195 The application launched successfully.
196 &Launch
197 Error reading INI file.
198 Click Launch to run application.
199 System area virus repair complete. Click Next to continue.
200 Initializing Virus Scanner
201 This Zip Rescue disk set was created on another system. Please be sure to use this set only with the computer it was originally created from.\n\nDo you wish to continue anyway?
202 Minor differences have been detected between the current CMOS information and the CMOS information saved on the Norton Zip Rescue set. Such differences are common and may not affect the computer's configuration. Click Restore to copy the saved CMOS information from the rescue set ONLY if you are unable to boot your system.
203 Click Scan to find any missing or corrupt Windows system files.
204 No missing or corrupt system files were found. You can click on Advanced Scan to search for system files that have been changed since you last updated your Rescue disk set. Otherwise click on Next to continue.
205 We found one or more missing or corrupt system files. Click View Files to select the files you want to recover.
206 &View Files
209 File:
210 Problem:
211 This file is missing from the hard disk.
212 This file is corrupt on the hard disk.
213 RBACKUP
216 The selected files were successfully restored. The originals were moved to the following directory:
217 This file is different on the hard disk.
218 The advanced scan will identify system files that are different on the hard disk and Zip drive.\nWe recommend caution when restoring these files.
219 Warning!
220 &Advanced Scan
221 No missing or corrupt system files were found. Click Next to continue.
222 VXDPATHS.LST
223 The version of this file on the Zip drive is newer.
224 The version of this file on the Zip drive is older.
225 N/A
226 IO.SYS
228 Scanning for missing and corrupt Windows files...
229 Performing the advanced scan...
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
